Keyboard and other buttons not working

I did a battery pull a couple times and it doesn't seem to help. It will reset in a way and show me that I have emails waiting but I can't get into my applications. I can use the rollerball to move on my main screen but can't move beyond that.
I had an issue about a month ago where I would try to send a text or email and I would type a letter and a different letter or number would show up but it only lasted a few hours so I let it go.
Is this something I can fix or should I send my phone out since it's still under warranty?
Thank you for any help you can offer!

You're welcome.
Having seen enough under these circumtances, moisture is my bet. You don't need to drop it in a bucket or spill a gallon of water on it, but even in a steamy bathroom during a shower, you will find this happens occasionally... I'll say this, if it is moisture damage, and you don't dry it out properly, you'll continue with these issues and futher deterioration.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My wireless keyboard and mouse do not work on my All-In-One computer?

    Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
    A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
    1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
    2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
    3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
    Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse.

    "This machine has an added 4 USB ports, could this be causing a problem?
    It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
    Have you tried removing the card? That's where I would start.
    Keep us posted.

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Cancel and Exit button not working

    Dear Experts,
    <u>Cancel and Exit button not working</u>
    I am calling a screen from inside a report program
    using SET SCREEN 9000.
    2 of the date fields(start date end date)
    on this screen are Mandatory.
    I am not able to Come out of this screen 9000 using
    CANCEL or EXIT button
    without giving a date entry in both of
    Mandatory fields (start date end date).
    Can someone help me with a solution?
    Appreciate your valuable help;
    Points assured
    Thanks,
    Aby Jacob

    Hi..
    To avoid this problem you have to use AT EXIT-COMMAND Module.
    1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
    2. In the PAI of the Screen Call this module.
       MODULE EXIT_SCREEN AT EXIT COMMAND.
    3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
       MODULE EXIT_SCREEN  INPUT.
           CASE OK_CODE.
          WHEN 'EXIT' .
                LEAVE TO SCREEN 0.
          WHEN 'CANCEL'.
          ENDCASE.
       ENDMODULE.
    This will surely work.
    <b>reward if Helpful.</b>

  • My macbook pro mid 2009 keyboard and trackpad is not working.

    My macbook pro mid 2009 keyboard and trackpad is not working. it was working perfectly fine a week ago and it stopped. i tried using a external wireless mouse and keyboard but only the mouse will work!! They keyboard lights up when it is booting up but when i try to sign in, nothing types or the mouse wont work. i am fine if the mouse doesnt work because i can use an external one but can someone please help me?!

    The best option is an appointment at an Apple store genius bar and have the technicians diagnose the problem.
    Ciao.

  • Hi, my Hp Pavilion lap, keyboard and mouse is not working

    Hi, my Hp Pavilion lap, keyboard and mouse is not working while  i am login into  windows 8.1. but it works in bois mode. can you please tell me the reason 

    Hi there,
    I had the same problem so did some research. Downloaded this driver and now everything's sweet. Hope it works for you too!! (This is only to get your hdmi working, sorry can't help you with the rest)
    http://www.nvidia.co.in/object/Quadro_3D_Vision_US​Bdriver_197.03_in.html

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Power button and home button not working and dont have warranty

    power button and home button not working and dont have warranty

    I had the same problem went to a store and paid $80 to have them replace the cable and it works fine now.

  • My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!

    My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!!

    Those are hardware issues. You can try all of the software troubleshooting if you want. Restart, reset, restore from backup, restore as new. If that does not work, then your only option is to pay someone for something. The decision is up to you, but I've provided the options.

  • IPod touch 5th gen. Home button stuck and power button not working! Please help!

    I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • Backup and restore buttons not working

    Hi,
    Any button in my backup and restore centre with a shield next to it (for UAC) is not working. Identical to this thread:
    https://social.technet.microsoft.com/Forums/windows/en-US/6a138e65-2834-41ac-bd40-c2344e20b824/backup-and-restore-panel-buttons-not-working
    A fair way down that page, Lokesh replies but I don't have any of the software that he mentions in his post. Is anyone able to help?

    Hi,
    According to the Lokesh's reply, this problem is probably caused by 3rd plugin in Windows Explorer Shell. UAC dialog couldn't be prompt correctly.
    To resolve this problem, you can try to use ShellExViewer instead to make troubleshoot, please follow the content of the link below for more details:
    https://social.technet.microsoft.com/Forums/windows/en-US/5353106e-5b19-4a26-8446-72bedf40b169/rightclick-context-menu-in-desktop-appearing-slow-win-81?forum=w8itprogeneral
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IPhone home and lock buttons not working at all?

    I got my iPhone 4 in October 2010. Since then I have accidentally dropped it on the floor and the back cracked, and in April 2011 I accidentally dropped it in a tub of paint. A bit silly, I know, but I managed to get all of the paint off quite easily and it was fine. However, at the end of last year, the home button started to malfunction and get stuck and just generally not work. In the past few weeks I've noticed I get trouble with it at least once a day and have to sit and press it until it works. Then, today, just out of nowhere, the lock/power button at the top of my phone just stopped working, it's stuck. I don't really have a way to wake my phone now unless I press the home button until it works, and I can't lock it anymore. I don't know whether it would be anything to do with the paint, considering it happened a year ago.  Is there anything I can do to get it working again or do I need to take it to Apple?
    Thank you very much.

    Ok this Might work
    1- Try rubbing your home button with alchohol ( or perfume ) in a circular motion for about 20 seconds
    2 - do the same to ur power button ( from left to right and repeat ) for about the same duration
    3- press and hold both your power and home button at the same time ..
    ... If this doesnt work try it one more time
    If it doesnt respond after the second time i'm afraid u'll have to take it to an apple care center :(
    Wish u luck

  • Keyboard and trackpad does not work.

    Hey guys~
    I have the late 2009 Unibody Macbook Pro and just yesterday both my keyboard and trackpad have stopped working. I was wondering if anyone else has experienced this and know of a solution. I made upgrades to the macbook (added more memory and a better HD) but that was back 9 months ago. Ive tried reseting the PRAM but I can't because the keyboard just doesnt work at all. I had to run out and buy a temporary external keyboard to plug into the USB. Any help would be appreciated. Thanks in advance!

    I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too! 

  • 8530 Track Pad and E buttone not working, also lines in photos.

    Device info
    Your carrier: SPRINT
    Model info and OS version: Curve 8530 5.0 Bundle 1675 (just upgraded)
    Apps and free space
    File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 106575952
    Did a battery pull fix your issue?: No
    Apps installed and their version if possible. (Go to Settings, then Options, then applications): None
    BT device model/version (you will have to look at the BT device): None
    Scroll pad works on and off, will not work on some menus.  E key will work sometimes, usualt types an upper case E and not a lower case, will not type 2 E's in a row.  Works ok when typing a 2.  There were some other buttons giving issues a while ago and then it all went away and now this just started again out of nowhere.  I tried backing up / wiping the phone, upgraded to the latest software and it is still giving me issues.  The phone has never been exposed to any sort of moisture, I don't even use it in the rain.
    Another issue, possibly related, possibly not is that I get 1 vertical line and 1 horizontal line in my photos I take.  This started out happening sometimes and not other times but now it is constant.
    Thanks for any help / suggestions you can give.

    Is the phone still under warranty? If so, I'd contact Sprint as this sounds like its probably a hardware issue (especially if updating the software didn't help). If the phone isn't under warranty any more, let us know and we'll see if there is anything we can come up with that could help.
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

Maybe you are looking for