Keyboard and time

After reinstalling Arch, with Xorg7, etc, I can't change the keyboard layout and the time... (I'm using Xfce4)
these are the steps I've tried...
- pacman -S xf86-input-keyboard
- nano /root/xorg.conf.new    ...   adding-  Option   "XkbLayout"  "uk"
- nano /etc/rc.conf   ...   adding- KEYMAP="uk"
- and to change the timezone i went   ...   nano /etc/rc.conf   ... adding- TIMEZONE="Afirica/Lagos"
but nothing has changed... any ideas?
thanks!

christianpurefoy wrote:
hmmm- well when I put in cp /etc/X11/xorg.conf.new /etc/x11/xorg.conf, it comes up with :
cp: cannot stat ' /etc/X11/xorg.conf.new': no such file or directory
should i mkdir a new directory?
No. Do:
cp /root/xorg.conf.new /etc/X11/xorg.conf

Similar Messages

  • HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure  if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

  • Keyboard and mouse don't work at all in 1 on 2 times!

    When my computer has already been started up once and I start it up again, then the PS2 keyboard and mouse will not work, but only 1 on 2 times precisely! So one time the keyboard and mouse are working, the other time keyboard and mouse are not working. The rest works fine. Quite mysterious isn't it? Who has a solution to this?
    If the power has been totally off and I put it back on again, then keyboard and mouse work properly.
    I have looked into the BIOS, Integrated Peripherals for something like PS/2, I couldn't find it, I have put out several things in the BIOS, but it didn't work.
    Now follows a list of everything I see when I am into the BIOS with the standard settings for integrated peripherals.
    Could it help to put items on and off here?
    Onboard device ->
    raid config
    on chip usb [v1.1+v2.0]
    usb/storage support.....enabled
    usb mouse support......enabled
    sata 1/sata 2...............enabled
    sata 3/sata 4...............disabled
    ac97 audio.................disabled
    mac lan (nvidia).........auto
    via on board 1394......enabled
    On board i/o chip setup ->
    onboard fdc controller.......enabled
    onboard serial port 1.........3F8/irq 4
    ir function select................disabled
    onboard parallel port.........378/irq 7
    parallel portmode..............ecp+epp
    epp mode select.................epp 1.7
    ecp mode use dma..............3
    I couldn't find a possibility for a hardware reset in the BIOS. It should be in PnP/PCI. Does anybody know about these things?
    Computer:
    AMD Athlon 64 3200+, MSI K8N Neo Platinum, nVidia FX-5200 128Mb, Aopen H600B, MS keyboard, Optical muis, Windows XP Home.

    Quote from: Svenomous on 25-September-06, 23:08:26
    Have you tried using a usb keyboard/mouse?
    I don't use any usb, only use PS2. Maybe it is possible to use some sort of a PS2 to usb converter, but I would rather like the PS2 to work.

  • Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

    Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

    Try resetting your SMC and PRAM.
    Resetting the System Management Controller  >>
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Can I run two midi controllers (keyboard  and pad) at the same time?

    ie.....can I play keyboard and use a pad for an effect of some sort - creating two instraments at the same time. I want to play say, piano on one instrament w/ a keyboard and at the same time play a synth effect on a trigger pad with another instrament (es 2)????????

    Yes.
    set 2 instruments to different midi channels.set the keyboard and pad to match.
    record enable both tracks in arrange.
    check: file/song settings/recording/auto demix by channel if multi-track recording
    this will allow you to record them both.

  • Garageband - "System Overload. The audio engine was not able to process all required data in time. (-10011). Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play.

    Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play. Ive worked so hard on this and I don't know how to fix it. I am not very skilled or knowledgable in computers and barely know how to operate Garageband as it is. I have many different tracks in this song for different drums and beats. Please someone tell me how to fix this, I'm not even finished it! And again I am not very informed on how to work computers as well as most of you are, just saying. thanks!!!
    P.S.: In my about this mac thing, it says i have version 10.9.1, 2.26 GHz Intel Core 2 Duo, and Memory is 2 GB 1067 MHz DDR3

    Could you do this?
    Go to Finder
    Go to Applications
    Go to Utilities folder
    Launch Activity Monitor app
    go to its Memory tab on top
    tell us what you see at the very bottom?
    Here is a sample of mine.
    I bet your page/swap amount will be huge.
    If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time.

  • Lenovo g50-70 keyboard and touchpad won't work at the same time

    My Lenovo g50-70 will not allow me to use my keyboard the touchpad at the same time. If' i'm moving the mouse pointer and then try to type something at the same time the pointer will stop moving until i stop typing.  I've searched the dicussion boards for a solution to this problem and I have found posts that instruct me to minimize the palm tracking portion of the driver. I now have the palm tracking set to the minimum value but it has not made a difference to my problem. does anyone have another solution? 

    Hi Dumptruck,
    Welcome to the Forums  
    As per the query we understood that you are facing issue with keyboard and touchpad in your Lenovo G50-70 laptop.
    Try to uninstall the touchpad driver and restart the system and reinstall the driver and check for the issue.
    Click here for the touchpad driver for windows 7.
    Click here for the touchpad driver for windows 8.1.
    Hope this helps. Do post back if the issue persists.
    Best regards,         
    Ashwin. S

  • Can i connect wireless keyboard and wireless mouse by bluetooth at same time?

    i am palning to use wireless keyboard and mouse and connect it with my Macbook by bluetooth, so can i connect these two devices at same time?

    i am pretty sure ther won't be any problem to connect 2 devices by bluetooth to Macbook

  • Cannot use Keyboard and touchpad at the same time? Twist

    Hi,
    I have the lenovo twist with the i7 processor and a 500GB hard drive (8GB ram). I have noticed that when using the keyboard, you cannot use the touchpad. Although you can use the trackpoint? I know this is a minor issue but can it be updated to fix? 

    Gamloi7 wrote:
    Hi, Kyleosipad
    You should be able to do this; it just requires the changing of a setting. If you navigate to Control Panel ► Mouse ► UltraNav ►Settings ► Smart Check Notices ► PalmCheck, you can adjust the PalmCheck sensitivity. PalmCheck is a feature that helps reduce misclicks and touches of the TrackPad. If you uncheck the box that says Prioritize for keyboard and touch input, and click Apply, then you should be able to type and use the TrackPad simultaneously.
    Best,
    Adam
    Yes, that's true - you can disable the "Prioritize for keyboard and touch input," but then you lose Palm Check ENTIRELY even though it's still "set" to its default position.  Mine is set one setting from the red setting, so the Palm Check should be active and working as normal.  However, when I start typing it goes nuts and my mouse pointer jumps all over the place.  The only way I can get it to behave is to again enable "Prioritize for keyboard and touch input."
    Can you confirm this?

  • After updating to Mavericks, my macbook's keyboard and mouse randomly stops functioning for a brief period of time.

    my keyboard and mouse will randomly stop functioning. i have to wait 20 seconds for functionality to return. please help.

    Hi,
    I'm exactly having the same problem as described above running on Boot Camp v2.1 as well as Parallels latest version. My macbook will just hang on itself and i had to press the power button to restart. Is there any fix to this?
    Thanks.

  • Brand New MacB Air and i haven't been able to get passed the format which has had to be done twice because, I have a French Numeric Keyboard and Language in English.  The minute I type in my password, the keyboard gives me letters that i did NOT type.

    I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,.  When setting up  I chose the French numerique keyboard, although there are two choices French or French numerique.  I put in my language as English.  When all was set up I came to the start page and had to put in my password, by the grace of g....I just happened to see the first letter I typed before it turned into a dot.  My password which was supposed to start with the number 2 showed a french e with accent before it quikly became a dot.
      Because of the dot system, this meant that I had no clue what the keyboard was typing as my password ...........and true enough my password was not accepted despite my trying all combinations.  I have had to reformat twice now thanks to Apple Chat and both times my password was not accepted.  I am in the process of formatting it again, this time on my own.  If the Start page does not accept my password again this can only mean that the Mac left the factory with faults.  I could not be more disappointed with the money spent and the time and trouble that Apple Chat and I have spent in trying to correct a brand new out of the box Mac.  I have a cheap Toshiba laptop also with a french keyboard and english language which gave me no trouble at all.  I am not impressed with the so called King of computers!  First of all the dot system is daft.  People want to be able to see and confirm their passwords before they are set for good.  Second,  this problem is going to give me a lot of grief.  Switzerland business is not renowned for its after sales service or the time it takes to do repairs.  When I had an issue with my Vaio laptop which was still under warranty, they kindly picked it up from my house, repaired and promptly returned it.  How's that for good proper service.

    i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
    do a true clean install
    reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
    at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
    exit disk utlity
    at menu, choose install OSX
    this time, when it asks for a password just hit continue, it will let you complete without a password
    you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

  • Keyboard and trackpad freeze and randomly become unresponsive

    I've got a MacBook Pro (15-inch Early 2011) running Mac OS X 10.8.2.
    Since a few weeks ago at random intervals my keyboard and trackpad become permanently unresponsive. I don't recall any particular cause or change that would have caused this to start happening.
    What happens is that the trackpad and keyboard will stop functioning completely. The computer, display etc. would continue to function properly:
    The clock keeps ticking.
    If music were playing it would continue etc.
    Internet connectivity (via an ethernet cable or WiFi) continues to work as well (a download will continue, and even resume if I disconnect and reconnect the ethernet cable).
    Presssing the power button will bring up the shutdown dialog as usual (but I can't use it, obviously, so a forced shutdown needs to be performed instead by holding down the power button longer).
    .. but the keyboard and trackpad are rendered inoperable, as if they were no longer connected.
    I've made no progress in finding out what could possibly be the cause of this. A few observations:
    It has never happened while not using the keyboard (e.g. watch a DVD with TV series for a few hours, and afterwards the keyboard would always be fine).
    It always happens while actively typing (e.g. while in the middle of replying to an e-mail).
    It is not a temporary problem, the keyboard and trackpad will not become responsive again after some time (the computer isn't particulary occupied with calculating something big, no beachball and no busy mechanical noises).
    It does not happen progessively. It works fine and snappy one second, and I'm touching a dead keyboard a split second later.
    I tried connecting a USB keyboard but that doesn't seem to work either (I'm mentioning this since some of the linked threads below close with that as a solution).
    Possibly related (although I haven't found anything in these threads):
    Keyboard causes trackpad to not function properly
    Keyboard and trackpack freeze
    Keyboard and Trackpad Unresponsive
    MacBook Pro Keyboard & TrackPad freeze! Totally Unresponsive!
    MacBook Pro inbuilt Keyboard and Trackpad freeze when not connected to bluetooth devices?
    I've crawled through some log files in /var/log (via the shell and through Console.app) and found a couple things that may be relevant, although they seem unrelated. Etiher way, I was surprised by what I found. All sorts of errors with regards to Bluetooth and USB stuff. I'm not aware of using either. I haven't used bluetooth in years and though I sometimes charge an iPod by USB, I haven't had any problems with that, and this keyboard/trackpad freeze has also happened on sessions where I started the laptop and never even touch the USB ports in the time leading up to the freeze.
    Sample log from when it happened. It last happened at 21:04:xx:
    Jan 14 20:18:39 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x141-192.168.178.13:0!
    Jan 14 20:23:49 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:26:14 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x142-192.168.178.13:0!
    Jan 14 20:29:11 KrinkleMac.local WindowServer[80]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    Jan 14 20:29:16 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:30:13 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:30:43 --- last message repeated 1 time ---
    Jan 14 20:33:24 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x143-192.168.178.13:0!
    Jan 14 20:41:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x144-192.168.178.13:0!
    Jan 14 20:42:43 KrinkleMac.local mtmd[46]: Set snapshot time: 2013-01-14 20:42:45 +0100 (current time: 2013-01-14 20:42:43 +0100)
    Jan 14 20:42:43 KrinkleMac kernel[0]: nspace-handler-set-snapshot-time: 1358192565
    Jan 14 20:43:14 --- last message repeated 10 times ---
    Jan 14 20:43:28 KrinkleMac.local AddressBookSourceSync[6580]: *** -[IADomainCache init]: IA domains cache is out of date.
    Jan 14 20:45:12 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:48:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x145-192.168.178.13:0!
    Jan 14 20:55:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x146-192.168.178.13:0!
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac.local blued[6615]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    Jan 14 21:01:14 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.427          AppleUSBHubPort[0xffffff803c3d2600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.722          IOUSBCompositeDriver[0xffffff803ae3be00](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:41 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:59 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.333          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.634          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:12 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:12 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.648          AppleUSBHubPort[0xffffff803a385000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.649          AppleUSBHubPort[0xffffff8038a3ba00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:13 KrinkleMac kernel[0]: E:[AppleBluetoothHCIControllerUSBTransport]WARNING !!!! [AppleBluetoothHCIControllerUSBTransport::DeviceRequestCompleteHandler] error 0xe00002ed (kIOReturnNotResponding)
    Jan 14 21:02:13 KrinkleMac kernel[0]: USBF:          145217.575          AppleUSBHubPort[0xffffff80398bf400]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.529          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.125          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.307          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.373          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          USBF:          145228.196          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.331          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.766          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:28 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145242.843          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145243.145          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:40 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:47 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x147-192.168.178.13:0!
    Jan 14 21:03:03 KrinkleMac kernel[0]: BRCM2070 Hub::terminate(kIOServiceSynchronous) timeout
    Jan 14 21:03:04 KrinkleMac kernel[0]: USBF:          145268.325          AppleUSBHubPort[0xffffff8039bc4c00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:03:20 KrinkleMac kernel[0]: USBF:          145285.139          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:21 KrinkleMac kernel[0]: USBF:          145285.572          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:22 KrinkleMac kernel[0]: USBF:          145286.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:23 KrinkleMac kernel[0]: USBF:          145288.132          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:24 KrinkleMac kernel[0]: USBF:          145288.882          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:25 KrinkleMac kernel[0]: USBF:          145289.385          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.455          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.456          AppleUSBHubPort[0xffffff8038a96200]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.492          AppleUSBHubPort[0xffffff803a9a6600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.483          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803b7c3700](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803c98b400](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145333.634          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145334. 67          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145334.916          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145335.347          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145340.675          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145341.108          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:18 KrinkleMac kernel[0]: USBF:          145343.300          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:19 KrinkleMac kernel[0]: USBF:          145343.803          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:20 KrinkleMac kernel[0]: USBF:          145344.644          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:23 KrinkleMac kernel[0]: USBF:          145348. 42          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145348.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145349.299          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:04:42 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:04:42 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:04:44 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:05:20 localhost bootlog[0]: BOOT_TIME 1358193920 0
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    Jan 14 21:05:41 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
    Jan 14 21:05:41 localhost kernel[0]: PMAP: PCID enabled
    Jan 14 21:05:41 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64

    I've recorded the logs several times now and although a lot is variable (likely unrelated errors and crap). The following 5 lines consistently occur right before the freeze:
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:06:10.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:06:10.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:06:24.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:07:22.000 PM bootlog[0]: BOOT_TIME 1358546842 0
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:29:27.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:29:27.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:30:02.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:31:39.000 PM bootlog[0]: BOOT_TIME 1358548299 0

  • Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

    I have a Mid 2011 Macbook Air.
    Upgraded to Yosemite last week.
    Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
    I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
    After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
    If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
    I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
    I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
    I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
    I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
    I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
    Thanks,
    John

    Hi!
    I have exactly the same problem, and I can't find any solution.
    I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
    I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
    Any suggestion is greatly appreciated!

  • Keyboard and trackpad stop responding briefly

    I have a late 2012 (current generation) MacBook Air with all software up to date.
    Every so often (sometimes multiple times per day, sometimes not at all) my keyboard and trackpad will stop responding to input for 1-10 seconds.
    This has been happening since the computer was new.
    Every time I go to the Console after I regain control I see the following:
    [date] [time] Dock[processID]: no information back from LS about running process
    There does not seem to be any prerequisite to that line, sometimes it's the only output written in the last 30 seconds.
    Does anyone have any idea what's going on here?

    If this were happening to me I would suspect a third party software conflict.

  • Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

    My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

    @sanjampet
    As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you,  the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
    Next time when it will work, I will update its firmware.
    My macbook was bought in dec2011 so no warranty now.

Maybe you are looking for

  • How do I create a non-apple ID account for a new adminstrator for a Podcast Site Manager

    http://myinfo.apple.com is inoperable.  I need to create a new account for an Administrator for our Podcast Site Manager account.  We have one that no one can access.  Can someone assist or point me in the direction of someone at APPLE that can?  I c

  • HOW DO I CONNECT AN HP 2200 TO OS X TIGER??

    Does anyone know how a Powerbook G4 w/Tiger installed to CORRECTLY to be connected to a dated but still-terrific HP Business Inkjet 2200 printer? So far I'm getting a flashing light response but no print yet after using a Belkin USB-to-parallel adapt

  • Need Help Blocking Xbox Live Ports on ES4200

    Can someone instruct me on best method for blocking access to Xbox Live on my ES4200? I want to prevent my niece/nephew from hogging bandwidth and/or limit/restrict their usage.  Please advise. Thank you, Nicky

  • Using ftp to Scan to iMac

    I have a networked Dell printer with a scanner. Before I switched to my new iMac with Leopard, I used "SMB to scan to computer," with the result being that the docs just scaned to a folder on my HDD. But now with the iMac and Leopard all I get is "Lo

  • Org Management & PA

    Hi, i have a question on Employed by and Works For Employee A - is employed by Personnel Area 1 & Cost centre 1A, He works for Personnel Area 2 & Cost Center 2B, & He is Paid by the Personnel Area which he works for - (Cost Centre 2B), Org Assignemen