Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit. After going through the recovery process with backup disk the built in keyboard and touch-pad do not work. During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned." The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver." I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
Help please!

Sparkles,
Thanks for the suggestions.
When dealing with MS Fix It, I was choosing run. Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work. It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft. I won't hold my breath on that one.
I'm to the point where I honestly don't care anymore. I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk. This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years. The built-in keyboard hasn't worked during that time frame on either hard drive. I don't think the recovery disks I was sent install properly. Not sure where to go from here. I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb. I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs. Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours. Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
Sorry if this seems like a negative post, but I'm just tired of trying to no avail. Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
Thanks for you help,
MadBuch

Similar Messages

How do I reinstate my free iPhoto upgrade after having to install new hard drive

As Above
Have installed a new HD (1tb) and used the discs to reinstall
Have been able to get back my upgrade to Lion back via App store but I cant get my iphoto 09 - 11 upgrade back (got free after buying macbook)
any help gratefully recieved to get my pics back
John

All I get is
iPhoto is already installed on this computer. Choose Software Update from the Apple menu to check for available updates.
Now All I get is iphoto crashing !!!!!

All button and touch pad not working except power button

I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

My Keyboard and touch-pad will work during post, but will not work after the os loads?

I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

Try pressing the fn key and f2 to reach bios
or
try a usb mouse from your desktop
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

MBP keyboard and track pad not working

Today the keyboard and track pad on our mac book pro laptop just stopped working. The mouse connected to it by usb continued to work but we can't type or anything. We tried the ^F6 keyboard shortcut but it did nothing since of course the keyboard isnt working. And it is also not the number lock key. The computer was working fine all day up until now. It is just under a year old. Any ideas?

I'm having the same problem. It appeared yesterday and then magically "repaired" itself. My MBP was fine today. Tonight the problem is back. No response from the keyboard and track pad. Track pad works fine using a USB mouse. My problem appears at start up. The cursor is in the usual upper left hand corner. It can't be moved. Restart, sleep then restart do not solve the problem.
Suggestions?

Key pad and Touch pad not working.

I can really use some help. I was working on my laptop last Friday when I received a Blue Screen of DEATH. Now the Key pad and Touch pad are not working. I rebooted the system... ,nothing. Updated the drivers again...NADA. I even re-formatted and re-installed The OS. All to no Avail. Is there hope or bury it?
Thanks in advance.

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Applications not working after resetting macbook from external hard drive

I installed Snowleopard a few weeks ago. Everything was working fine, though a bit slow for a while, I figured it was just because I have had the computer for a while, but about a week ago it shut down and wouldn't restart. It would go to the login page where i would type in my password but wouldnt log in to my desktop. I did what apple suggested on their website and reset everything and restored my computer settings from the time machine backup on my external hard drive and reinstalled snow leopard with the install dvd. Everything was seemingly back to normal, but now most of my applications are not functioning correctly. I can't use isight with skype (though it works with photobooth), I can't import photos from my camera to iphoto, imovie won't even open (displays "imovie quit unexpectedly" and other things of this nature.
Since seeing that multiple applications are not functioning correctly, I kind of figure that its not an isolated problem with just one application but maybe something wrong with my OS since I reinstalled it? I've tried resetting my PRAM and NVRAM but that hasn't made any noticeable change at all.
I'm about ready to give up and take it in somewhere to be looked at unless someone can give me some good advice on how I can fix it myself? All suggestions appreciated.
Thanks

I realize this post is from quite some time ago, but it showed up as relevant in my own search to resolve this problem. So hopefully my answer will be equally visible and thus helpful.
Select the movie file within iTunes (not the actual file(s) in the finder) and drag it to the desired location on your external hard drive. While doing so, you'll notice an indicator showing that you're in fact moving two files: the movie (m4v) file and the associated Extras (ite) file.
The first time I attempted this process, I selected the files within the Finder and dragged them to the external hard drive. I was able to play the movie itself from this location, but the Extras wouldn't play. After spending a considerable amount of time searching for a solution I tried the afore mentioned and it worked.
No promises, but hopefully this will work for some of you out there and save you some time and frustration.
Signing off...
~B

G500s Touch keyboard and mouse pad not working

I've uninstalled and reinstalled the drivers. The solution center says everything is fine. USB mouse works, as does the touch screen, just not the actual keyboard or pad.
Please help.

For additional information - i now have my keyboard working, but the touch pad is still not working. I went to the lenovo site and downloaded the elan driver again. it extracted, but once i clicked for it to install, it says No Appropriate Driver to be installed.

CD, SD card reader and Touch pad not working

Hi, I have a mid 2009 MacBookPro. Some months ago my touch pad started to play up, it works sometimes but does not let me move screens around etc, then my SD card reader stopped reading any SD cards, I have tried pushing it in a number of times, I have attempted to use it with iPhoto open, no joy. Now my CD drive is not working and does recognise any disc I put in. Does anyone have any idea what could be going on????

Hi JillyJnr,
If you are having issues with multiple I/O interfaces, you may want to try resetting your SMC/NVRAM. You may find the following articles helpful:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Apple Support: About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Regards,
- Brenden

Qosmio G30 - keybored and touch pad not working

Hi
I have a G30 and I have just replaced the DVD drive as my old one stopped working and now my touch pad and keyboard dont work.
The keyboard works in the BIOS. However it dosnt work in windows so I cant even login. I have tryed FN F9 but had no luck and I cant reformat my computer as the DVD drive has only just been put in.
I cant use that either because there are no drivers for it on the computer and its not being picked up.
Any help would be greatly appreciated thanks :)

Hi!
Have you tried external input devices? I mean an external keyboard an mouse.
Why you cant reinstall Windows? You dont need a driver for the DVD drive. You just need the Toshiba recovery disk and boot from it. Follow the instructions on the screen and it starts to reinstall Windows.
Bye

USB NOT WORKING AND TOUCH PAD NOT WORKING

On right click often touch pad is stop working untill restart.
I have tried those drivers:
sp65476.exe(win 7) , sp69619.exe(win 7), sp67332.exe(win 8.1) 64bit .
During installation it prompts PCI Device Driver not installed.

Hi:
The touchpad driver from your notebook's support and driver page is sp69626...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-145252-1&cc=us&dlc=en&lc=en...
The PCI Device (card reader) needs this driver...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en...
Download and install the amd chipset drivers and reboot for the usb 3...
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

T43 Touch Pad not working after Window 7 installation.

The Touch Pad on my T43 is not working with Window 7. I have tried several drivers without success; any suggestions??
Solved!
Go to Solution.

Did you try to install system update 4.0 to get all the correct drivers?
You can also enable/disable the touchpad in BIOS so you could doublecheck it's actually enabled. You can also enable/disable touchpad by going into the control panel, mouse and the Ultranav tab if you have the correct driver installed. Another options is to press Fn-F8 to enable/disable touchpad, but this one also require some drivers and software from Lenovo to work.
-gan

Software complaint and touch pad not working

iam using 9300 handset and its hasn't been a year since I bought it. iam facing lot of software problems and my touch pad is not working properly. I bought this set from Dubai and iam using it in India, bangalore. When I went to the BB service center they said they do not accept international handset. Kindly tell me what should I do now!

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Keyboard and Mousepad does not work after installing windows support software.

I was able to successfully install windows 8.1 64bit on an late 2012 iMac. I went through the installation just fine with the mousepad and keyboard. I went into the desktop and open up the files and went to computer to download the windows support software. After it was done installing the windows support software, my mouse and my keyboard stopped working completely. I couldn't even click "finish" on the download. I turned the computer off by pressing the power button, then turned it back on. I held the option key and the Macintosh HD and Windows showed up. I turned the mousepad and keyboard back on and it was working again. So I clicked on Windows and as I enter the startup screen, the mouse and keyboard stopped working again.
Computer: iMac 21.5 in. late 2012
Used Windows 8.1 Pro 64bit
The keyboard and mousepad that I have is bluetooth.

Hi,
Have you checked it from Sounds yet. Please
Right click the speaker icon
Select Recording devices
You should see a "tick", otherwise Right click it and enable it.
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Yoga Keyboard and touch pad stop working...

I just received my new Yoga and have noticed a very annoying glitch. The keyboard and touchpad stop working and the only way to get them back is by closing the lid and opening it again. It seems to do it when I use the touchscreen while in the "laptop" position. Any suggestions? I am curious if it is a defect or if I am turning them off some how.
Help!

Has anyone ever had their keyboard and touchpad randomly become unresponsive? I've had the machine for two days now without issue. In the last hour though this has happened three times. Putting the machine to sleep using the power button and waking it back up brings them back to life. Is this a driver issue, or? When this happens the touchscreen still operates normally.

Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

Similar Messages

Maybe you are looking for