Keyboard and trackpad doesn't work - in a weird way!

All of a sudden, while browsing, my trackpad started to act as if I was right-clicking. And when two-finger scrolling it zooms.
When using the keyboard I get error sound and otherwise no reponse.
I have tried to plug in an external mouse, and it behaves exactly the same way as the trackpad, including the zooming instead of scrolling.
I haven t tried ext keyboard yet.
I have restarted several times. Cannot get into the machine since I cannot enter the code because of the keyboard error. Although At one point that part suddently worked, and I was in. But the problems are still the same. Right now I am back to not being able to enter my entry code.
Very strange I think. Anyone experienced this?

Make sure your trackpad is clean and no keys are sticking. Restart doing a
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Keyboard and trackpad does not work.

    Hey guys~
    I have the late 2009 Unibody Macbook Pro and just yesterday both my keyboard and trackpad have stopped working. I was wondering if anyone else has experienced this and know of a solution. I made upgrades to the macbook (added more memory and a better HD) but that was back 9 months ago. Ive tried reseting the PRAM but I can't because the keyboard just doesnt work at all. I had to run out and buy a temporary external keyboard to plug into the USB. Any help would be appreciated. Thanks in advance!

    I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too! 

  • My macbook pro mid 2009 keyboard and trackpad is not working.

    My macbook pro mid 2009 keyboard and trackpad is not working. it was working perfectly fine a week ago and it stopped. i tried using a external wireless mouse and keyboard but only the mouse will work!! They keyboard lights up when it is booting up but when i try to sign in, nothing types or the mouse wont work. i am fine if the mouse doesnt work because i can use an external one but can someone please help me?!

    The best option is an appointment at an Apple store genius bar and have the technicians diagnose the problem.
    Ciao.

  • Keyboard and trackpad have stopped working

    Hi there
    My girlfriend and I have 3 yr old MBP's and her keyboard and trackpad have stopped working. She can plug in an external USB mouse and it moves around, but she can't type her password into the log in. hence she's stuck.
    We have tried powering down and up 3 times, even taken out the battery.
    Can anyone suggest help?
    Thanks Rob

    She needs a new top case. On older systems, the keyboard, trackpad, and even power button are all controlled via a single cable. Odds are, if you wait long enough, the power button will stop working too.
    I'd estimate the repair cost at probably around $250-$300, so she might just want to be looking for a new laptop. You can also hit ebay and craigslist to see what you can find, just be careful with the screws for the top case. You get the wrong screw in a couple of the holes, they will never come back out until you break something.

  • My Keyboard and trackpad aren't working.

    I recently restarted my MacBook and when it restarted and booted up the keyboard and trackpad won't work. I have restarted my computer since then and nothing. I took out the battery and unplugged it and rebooted it and still it won't work. The only button that works is the power button. I tried to put in my install discs and I can't choose to restore because the trackpad won't work...

    I am currently having this same issue. What can I do to fix this??? Brand new macbook unibody.

  • After update, keyboard and trackpad does not work on MBA but wireless mouse works. I don't use a wireless keyboard. Stuck at login because need to enter pw. Anyone have this issue? Please help!

    My Macbook Air (13", mid 2011) right after I did the Maverick OS update. My keyboard on Macbook Air is not working and it says "There isn't a keyboard connected" (Bluetooth Keyboard Setup). I do not use a wireless keyboard. Apparently my bluetooth works because my wireless mouse works. I am currently stuck at my login screen not being able to get in because I can't even enter my password. I am, however, able to login as guests and get to the Keyboard viewer to type things with my wireless mouse. I really need my keyboard to work to use for my job. I need help please!

    I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too! 

  • My Macbook pro keyboard and trackpad do not work

    There is no water damage. So please, do not say this may be the problem. My mac is only around 2 months old. I was using my keyboard and trackpad fine, when i looked away, and when i looked back nothing worked at all. No keys, nor the trackpad work. Please if someone knows a known issue, please bring it to my attention. Thanks!

    There is no water damage. So please, do not say this may be the problem. My mac is only around 2 months old. I was using my keyboard and trackpad fine, when i looked away, and when i looked back nothing worked at all. No keys, nor the trackpad work. Please if someone knows a known issue, please bring it to my attention. Thanks!

  • Keyboard and Trackpad just stopped working completely

    Hi, I'm on a MBP 2.4 GHz running 10.4.11. Beginning yesterday my keyboard and mouse completely stopped working. This happened twice. The first time I got them working again with a hard shut down, the second time I got them working by closing the screen, putting the computer in standby. When I opened the thing back up, everythign was working.
    Today, though, when the keyboard and trackpad quit, I've been unable to get them working again.
    My problem is similar to the ones experienced here by MBP 2.4 and MB Air owners:
    http://discussions.apple.com/thread.jspa?messageID=7194888
    With the difference being that I'm on Tiger, not Leopard and I can't get the key or pad to respond at all. The solutions offered at that thread don't work for me.
    I've plugged in an external keyboard and mouse and those work fine.
    Any help you can offer is appreciated.
    Luke Baumgarten

    Related to the keyboard and mouse or trackpad not working, I've found of late that the whole lot freeze up and that wretched spinning timer takes over ad infinitum. Only way out is to hold pwr button the customary 6-8 seconds, then re-start with pwr/option.
    Problem could be related to (Apple) upgrades as it's after a new one that this problem creeps in.
    Makes me want to either revert to Factory settings or, Heaven forbid, give this MacBook Pro the float test and go back to Microsoft or even dig out the old steam typewriter.
    The latter may be the best option - my life has definitely NOT improved since I invested in this heap of junk and the almost daily offerings of wonderful software by Apple are now set up for Spam, they're such a waste of time...
    So, that's my Sunday moan.
    If I leave this thing alone while I make a cup of tea I'll find it frozen again by the time I come back - any help on this from anyone??? (Steam being a bit pricey these days)
    Tamji

  • MacBook suddenly turns off at 40% of battery charge and trackpad doesn't work

    Hello,
    I had to replace the battery of my white MacBook (13 inches, mid 2010), because it was swollen, and the capacity was about just 20-30% of its original one. I bought a new one. Specifically, this one. After replacing it, I have those problems:
    When I run on battery, the computer suddenly turns off at about 40% of the charge. No warnings. Just turns off.
    The trackpad is not working properly. I can move the mouse, but I can not click. The swollen battery was pusing the trackpad, and I guess it's broken now. I don't know if I can replace it.
    Coconut battery tells that the maximum charge of the battery is below the design capacity. Not sure if this is a problem, or Coconut battery is just comparing my battery's numbers with the theoretical numbers of a brand new battery. Check a screenshot
    The battery drains too fast. From 100% to 65% in about 20 mins. So, at the end, I have less than 1 hour of battery time.
    I've tried resetting the SMC, following these instructions. Specifically, pressing (left side)Shift-Control-Option keys and the power button at the same time, releasing all the keys and then pressing power button to turn on the computer. Not worked. I think it was even worse.
    Could it be a problem of this specific battery? Or maybe just the MacBook doesn't accept batteries like that one? It's not original.
    In the first case, I would return the battery to get my money back. In the second case, I guess I should have bought an original one.
    Additional data that may be useful:
    Mac OS X 10.8.5 (12F4S)
    EFI boot ROM version: MB71.0039.B0E
    SMC version: 1.60f6
    About EFI boot and SMC versions, those are the last available official updates, obtained from here.
    Many thanks in advance.

    I'd say it was a faulty battery.

  • My keyboard and trackpad mysteriously stopped working in Windows 7 Professional.

    This has happened many times, and every time I have to resort to re-installing windows; I want to avoid this hassle.  This usually occurs after an update or forced reboot. 

    Related to the keyboard and mouse or trackpad not working, I've found of late that the whole lot freeze up and that wretched spinning timer takes over ad infinitum. Only way out is to hold pwr button the customary 6-8 seconds, then re-start with pwr/option.
    Problem could be related to (Apple) upgrades as it's after a new one that this problem creeps in.
    Makes me want to either revert to Factory settings or, Heaven forbid, give this MacBook Pro the float test and go back to Microsoft or even dig out the old steam typewriter.
    The latter may be the best option - my life has definitely NOT improved since I invested in this heap of junk and the almost daily offerings of wonderful software by Apple are now set up for Spam, they're such a waste of time...
    So, that's my Sunday moan.
    If I leave this thing alone while I make a cup of tea I'll find it frozen again by the time I come back - any help on this from anyone??? (Steam being a bit pricey these days)
    Tamji

  • [SOLVED]Keyboard and touchpad doesn't work after reboot from Arch

    Excuse me, but i'm a newbie. I'm not sure if this is an arch problem, but i will just post it here.
    I've beening using Arch64 and it works just fine. However, every time i reboot from arch into Windows 7 (32bit), the keyboard and touchpad will stop responding just when the Win7 splash screen shows, however the mouse works fine. Then when you shutdown the computer (from win7 now) it will take apparently longer time, and sometimes i have to press the power key 5 seconds to make it shutdown.
    It seems the correct way (to reboot from arch to win7) is to shutdown down the computer first and start it again, and everything will work fine.
    And rebooting from win7 to win7 or arch to arch or win7 to arch will work fine too.
    I'm glad to post extra information, but I've got no clue and i'm not sure what to put here.
    The laptop is a Lenovo Y450 with Intel Core Dual P7540, 4G Memory, NV GT240M. Kernel version of Arch is 3.0.6 (but the problem existed long since earlier versions) I don't have a swap partition. If you need extra information, please mention the item.
    Thanks a lot!
    Last edited by crlf0710 (2011-11-15 10:29:38)

    Hi!
    That is indeed strange. Since your external mouse works fine (which probably is connected via USB, right?) it appears that the problem lies somewhere around the internal keyboard/touchpad access. I'm not sure how this works with a Lenovo Y450, but just try to enter BIOS (in case you have not been there, you probably have to hit F1 or F2 during startup - less likely it would be delete or escape ...) and look for your keyboard/touchpad options.
    You should probably find something like "... legacy support ...". This is a relic from PS/2 times and emulates your internal input devices as PS/2 devices. So - when found, just change the setting (you cannot mess anything up, and both systems will probably not even pop up a message). My guess is it is set to "enabled" and Arch somehow messes with the PS/2 emulation in your case .... so just turn it off.
    good luck

  • Keyboard and Mouse doesn't work on system preferences after 10.5.2 upgrade

    The keyboard and mouse configuration through the system preferences painel has stopped working after installing the update to version 10.5.2 of the Mac OS X.
    This occurs when using the Brazilian Portuguese language. Any suggestion?

    I've found a fix here:
    http://antoniofonseca.wordpress.com/2008/03/12/correcao-para-o-problema-do-tecla do-e-mouse-no-leopard-1052-em-pt-br/
    In short: there's a problem with the Brazilian Portuguese translation, it's the only language affected.

  • My cursor and trackpad doesn't work. I just changed the batteries

    How do I get my tracker to work?

    Your contacts are available with your iCloud online address book - when you log in with your iCloud account via webmail access using a browser on your computer, your contacts are available there?
    Your contacts are not available with an address book app on your computer?

  • Keyboard and trackpad in macbook pro doesn´t work

    My keyboard and trackpad doesn´t work. I have a macbook pro 17" from 2008, and i upgraded the OS to Snow Leopard. I even tried with Lion, because i read somewhere that this could solve the problem, but so far, nothibg.
    Help!!

    I do have a bluetooth keyboard and magic mouse...This means i can work.
    But the problem is i need to work out of home, and i don´t want to carry all those things everytime i have to go out.
    And you´re right, i don´t have warranty...
    I´m sure i didn´t drop liquids over it. And although it did dropped once when it was new, nearly 4 years ago, it worked just fine for 3 years. About 8 months ago, keyboard and trackpad started to fail, until they just died.
    I tried cleaning it and reinstalling OS, but nothing so far.
    Help!

Maybe you are looking for

  • How to open the Transported model Object in the Target Portal Story Board

    Hi All, How To Transport Applications Modeled in Visual Composer from NetWeaver 2004s to NetWeaver 2004 I have transported one VC model from Development  portal to Testing Portal. But Once i transported , under the PortalContent -> Visual Composer ->

  • Will Time Capsule replace an ATV 1st Gen?

    Will the Time Capsule act as a replacemnt for my aging ATV1st Gen? It has a large HD capacity and wireless streaming, so will sync with iTunes and stream content to my Airport Expresses? Thanks.

  • Photo attachment

    Hi all, I received a email with a photo attachment, and the photo was fine. I reopened the same mail. And the attached picture is all dark. Please advise what am I doing wrong? I forwarded the same email to my pc and the attached photo is fine. Any s

  • Deleting Transitions in a Multiclip

    In a multiclip how I do I delete transitions so I can choose new ones?

  • Goods issue from vendor consignment stock with freight charge

    Hi Experts, I have a typical scenario for GI from consignment stock with freight charge. The consigment price is agreed of the material is agreed between the vendor and the client. The vendor buy the material and use the company/client shipment.The c