Keyboard Backlighting - time-out / auto turn-off

Is there a way to enable automatic time-out of the Steelseries backlit keyboard (GT70)? Or is it supposed to stay on all the time while the computer is awake?

Hi, as I know MSI SSE is OEM customize version based on the generic SSE, http://steelseries.com/, since the native SSE doesn't have such feature, it is reasonable that MSI version doesn't have time-out feature, either. You can also submit such proposal on SSE website, maybe they would consider to adapt such feature in newer version.

Similar Messages

Upgraded Cloudon ..now backlight does not auto turn off when not in use. How do I do that

Upgraded Cloudon. Now the backlight does not turn off when not in use. How can I correct this. Using iPad 1sted

Is your question for a MacBook Air like your profile says ? You're in the iPad Forum, I could ask the hosts to move your question.

I have moved to the country where my internet speed is slow. I am running some auto updates that keep timing out half way through. Can the time out be shut off to complete the update?

I have moved to the country where my internet speed is slow. I am running some auto updates that keep timing out half way through. Can the time out be shut off to complete the update?

bondod wrote:
Can the time out be shut off to complete the update?
I'm not sure about that. But what you could try is to set the Update Preference to "Manual" and try updating at a time when the Network may not be as busy, like late at night or early in the morning.
Just an idea.

Backlight Auto Turn Off

When playing music my backlight of the iTouch does not shut off unless I manually press the black button on top...any way to make it auto turn off like my ipod?

Actually...you should Read My Reply’s correctly
I never said PassCode-Lock...actually no one has brought up PassCode-Lock…you’re the first.
My point was even sliding the bar is an extra step I would rather not do while driving, but of course I want the backlight to turn itself off in 1 min…but it seems like the AutoLock MUST be on to have the backlight auto turn off...and that the backlight does NOT work independently from AutoLock…it seems there is a NO backlight setting that controls NOTHING but the backlight, unlike a regular ipod.
I was just asking to be sure I did not overlook something.

Canon S-100 forgets date and time each time it's turned off.

Hello, I have a canon S-100 that forgets the date and time each time it's turned off. I see chat rooms that talk about if the internal battery is shot. The S-100 will loose date/time if the battery is removed. My S-100 asks for date/time every time I turn it on without touching the battery. Has anyone come across this issue?

The S100 has a built in rechargable battery that runs out after a few weeks of non use and no battery inserted. You can also set it to automatically update via GPS as shown on page 115. I attached a portion of page 21 from the user manual to explain it better.

Time machine is turned off but my startup disk keeps filling up with backup files on a hidden volume.

My Time Machine is turned off but my system startup drive keeps filling up with backup files in a hidden volume. How can I stop this? When Time Machine was turned on, the destination was set to an external drive. I was completely confused about what was happening until I used Houdini to reveal the hidden volume. I have no idea how it got created or why it keeps filling up with no backup application running to my knowledge. Thanks.

Please read this whole message before doing anything.
Download this, or a similar tool if you prefer:
OmniDiskSweeper - Products - The Omni Group
Boot in safe mode. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, possibly including wireless networking.
Does your boot volume continue to fill up? Use the above tool to explore the volume and find out where the space is going.

Z3 Wifi Auto Turn off

Hello ,
Just got my z3 a few week and start using it . Moved from IOS . I am having a few problem with my Z3. I can't find my problem in the forum. My Wifi is doing auto turn off. I checked on Wifi Alaways on . But as soon as i m out of wifi signal it will go off. I always forgot to turn it on as a result of it . Could it be from one of the app i installed ? I m pretty sure nothing wrong with the product as i can use it when the wifi is on.
Thanks

Thanks for the reply .
@sehnsucht , exactly what u said .
@stockyvillage , i did exactly what you said and it's still not coming back . Any ideas plz it's getting annoy

E90-1 auto turn off [help please!!!]

Dear ALL,
I am a fresh man here. I am just got an E90(version E90-1) 1 week ago (made in Finland).
And upgraded firmware 400.34.93. I think that everything would be OK however,I have a big problem.
"My phone auto turn off without and notice" Sometimes just 10m after turn on, sometimes 10 hours.
I am really confused now. Functionality of the phone have no problem besides problem above (auto off)
I wonder it come from firmware issues.
Have anyone had any experience about this situation, please help me!
Thanks & best regards,
Khanh Tran

I have the same problem with my new 5800.
I faced it at 1st day.
Sometime I suddenly look at it, and it's on restarting, or some times when I look at it, it's turned off.
Any one help me????
Is it from hardware or software?
Is Nokia responsible for this buggy mobile??
Excuse me for my bad English.

Xperia V Auto-Reboot / Auto Turn-Off - And terrible HK Xperia Care service

I am an owner of Xperia V (Black) and recently, the phone turns itself off automatically OR it reboots itself automatically whenever I use it for, say, around 15 minutes. It only happens when a SIM card is in the phone - it doesn't happen when, say, the SIM card is removed and I am only using WiFi to go on the internet. I use a 4G LTE card from PCCW Mobile in Hong Kong but in fact trying another 3G card there is the same issue.The most terrible thing is what I have so far experienced from the Hong Kong Xperia Care Centre in Mong Kok. I have brought my Xperia V for repair for already the third time and it has been the same issue which still persists! The first time (having waited for a week before the phone "allegedly" got repaired), the Xperia Care centre told me that they have changed the motherboard of the phone and things would be ok. But - no - just when I tested the phone before the Xperia Care guy, the phone turned itself off immediately when I was doing the Set Up procedure. Instead of having the phone back for further checking, the Xperia Care guy told me that it would be an issue with the PCCW Mobile SIM Card, and asked me to go to a PCCW shop to change for another SIM card. I did it, and it does NOT work and have to go back.I went back the second time the next day, and told the people that this is my second time of repairing the phone. The Xperia Care centre person then asked me whether I brought the "charger" of the phone so they can check the charger as well. I have no clue why this problem is related to the charger and why I am told to come back another time. I insisted to put down the phone for repair and in the end they accepted. Another week has passed, I got back the phone from Xperia Care centre. I was told they gave me a new battery for the phone. But, within 5 minutes of using the phone with my SIM card in (bearing in mind this is a new SIM card), the phone turned off AGAIN - despite having 9x% battery level!! It keeps turning off. I am so so so frustrated. I was stupid because I had already left the Xperia Care centre so wasn't able to show the guy the problem. But I just don't understand why the Xperia Care repair guy don't realise this problem - as long as they played with the phone for 5-10 minutes they would have discovered the problem.Now the phone is being repaired for the third time. I said that, given this phone seems to be unrepairable - I should be getting a new one instead of coming back for another 4th or 5th time!!! Unfortunately, the staff told me that this is impossible and they can only exchange parts for me.Sony, could you PLEASE make sure that this phone is getting well repaired before you return it to me??!! I am really sick of going to the repair centre for so many times and if this happens to again, I think I am going to swear I will never buy a Sony phone ever again. It's 3 weeks that I'm deprived of my Xperia phone to use!!

hi zeefung and anyone else, any interest to go Consumer Council to complain Sony Mobile for this unrepairatble auto reboot / auto turn off case?? https://www.facebook.com/sonymobilehk/posts/10151551299574699?comment_id=25793095&reply_comment_id=25967624&offset=0&total_comments=15&notif_t=feed_comment

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue?

I accidentally delete all my photo in the "all my files". How could I back up all the photo? (time machine is turn off)

I accidentally delete all my photo in the "all my files".
actually I delete every thing in ALL MY FILES.
How could I back up all the photo?
and other data, such as movies and so on?
Do I need to go to Apple store to back up?
(time machine is turn off)

If you don't have a back up then you'll need to use a file recovery app like File Salvage
To back up iPhoto you make a copy of the Library on another disk.
Regards
TD

Adobe Air Auto Turned Off Smoothing?!!!!

Hi,
I am using Adobe Air to create a media player. To have better video quality, I have added video smoothing enabled. However, recently I installed it on an ATOM PC, the video playback is lagging due to the performance of PC hardware. But, during the video playback, the video seems to be displayed without smoothing applied.
Here I want to ask is Adobe Air will automatically turn off video smoothing on certain condition? If so, how can I prevent it to auto turn off? Thanks.

How about first blit your image to a small bitmapData, then draw it on a large bitmapData (9X larger)?
Like,
var small_bmd:BitmapData = new BitmapData(SMALL_WIDTH, SMALL_HEIGHT, false);
var large_bmd:BitmapData = new BitmapData(SMALL_WIDTH * 9, SMALL_HEIGHT * 9, false);
var bm:Bitmap = new Bitmap(large_bmd, PixelSnapping.NEVER, false);
var blitRect:Rectangle = new Rectangle(0, 0, 9, 9);
var i:uint, j:uint, blitColor:uint;
small_bmd.draw(SOURCE_IMAGE);
large_bmd.lock();
for(j = 0; j < SMALL_HEIGHT; j++){
     for(i = 0; i < SMALL_WIDTH; i++){
          blitColor = small_bmd.getPixel(i, j);
          blitRect.x = i * 9;
          blitRect.y = j * 9;
          large_bmd.fillRect(blitRect, blitColor);
large_bmd.unlock();
Not sure if the code works or not, but hopefully this helps.

Cannot install Mavks. Get the message that HD is used for Time Machine B/U. Not true. Also Time Machine is turned off.

Cannot install Mavks. Get the message that HD is used for Time Machine B/U. Not true. Also Time Machine is turned off. Running OS 10.8.5.

That message appears when there's a "Backups.backupdb" folder in the root level of the OS X volume. This folder is used by Time Machine to store backups, being this the reason why the OS X Mavericks installer detects the OS X partition as used by Time Machine.
To delete it, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the OS X Mavericks installer in /Applications and follow the steps. Make sure you have got a backup of your files before upgrading and check that your apps are compatible > http://www.roaringapps.com

Re: Qosmio X770 - Keyboard Backlight Timer

Hi
I have just purchase a Qosmio X770 and would like to know how to increase the keyboard backlight timer above 1 second. I would greatly appreciate anyone letting me know how to do it (if it's possible).
Thanks

>only setting available in the keyboard settings tab is whether to enable or disable 'wake on keyboard'
Well, I presume other settings regarding the keyboard backlight are not available.
There is not big difference between available Toshiba software on different notebook models and series and to be honest I never saw a option which could increase the keyboard backlight timer. So in my opinion you cannot change this.

Keyboard Backlighting - time-out / auto turn-off

Similar Messages

Maybe you are looking for