Keyboard buttons changes wifi status and mutes the volume
Its' strange issue that i face for the last couple of days.
Whenever i started to use WIFI , and press the button R alphabet, it automatically disables the wifi connection. Pressing the R again will enable the wifi.
The problem occurs to Mute/Unmute the volume when i press T button . I am not sure of the issue. And there is not even a single person/blog where i have seen the same issue happened to someone else.
Please suggest me something ASAP.
My Model is HP Pavilion G6-3110
Windows 7 - 64 BIT.
Thanks,
Madasamy M.
Is this still on warranty ?
I am not sure of the issue, personally I would check the connection of the keyboard to the motherboard as it might have moved. I never got that, but sometime I wasn't able to write with some of the keys, when reconnected correctly, the issue was resolved.
Are the R and T key works to write ? If so, it could be possible to disable those function keys (wifi, volume + - mute, etc) as a short/long term solution.
Removal of the keyboard on HP G6, it should be similar.
http://www.youtube.com/watch?feature=iv&v=OwhEDnyBcAI&src_vid=txH0U_eziaI&annotation_id=annotation_2...
You need to remove the bottom panel, remove one screw (sometimes there is a keyboard logo stamped on the plastic near the screw) and push the clips on top of the keyboard while trying to remove it. The connector latch needs to be lifted to be able to disconnect the keyboard. Then reconnect the keyboard cable pushing it as far as it goes, then close the latch. Reassembly is the same steps in reverse .
Similar Messages
-
I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen. When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again. So I was wondering how can I get it to revert back to the way it used to be? I hope this isnt confusing.
I tried the zoom thing but it still didnt resolve my issue Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar. Anyone else have any ideas of what I did to mess this up?
-
Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?
Hello, try kguy's solution here...
https://discussions.apple.com/thread/2332457?start=0&tstart=0
First, Go to System Preferences, keyboard, and click on the Keyboard tab
Make sure that the checkbox by "Use all F1, F2, etc, keys as standard function keys" is NOT checked.
Next, click on the Show All button, and select Bluetooth. You should see your Apple Wireless Keyboard listed on the left side of the screen.
Click once to select it, and then click the gear icon at the bottom of the box, and choose Disconnect.
Power off the keyboard by holding down the power button on the keyboard for a few seconds until it show "keyboard Off on your imac screen, then turn it back on again.
The device should appear once again in your bluetooth list.
Try out the volume control buttons now, and see if that cleared things up -
My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
RichYou won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. -
I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
Be sure to open Keychain Access and repair the keychain:
Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start". -
I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your computer or apple tv using account ***
Does anybody have suggestions as to why this is the case?Understanding Home Sharing - Support - Apple
Hope this helps. -
I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.
Where exactly did you get this phone?
Do you have a SIM in the phone?
There are 2 primary causes for this.
Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it. -
i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?.,
Either way the result is the same... if you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.
-
Do I need to purchase an iPad with cellular to use imaps or can I purchase an iPad with wifi only and use the data connection on my iPhone.
My aim is to have maps on the bigger iPad screen.the wifi version don't have an gps chip
-
To whom it may concern,
I bought an iPhone 4s last November from your New York store (IMEI number ).
It has now malfunctioned (the wi-fi button is grated out and so the wi fi
cannot be switched on). I have been told by the Polish Apple store that they
would be unable to repair it or replace it as it was bought in the USA. it is
still within the warranty period. could you advise me as to the newt steps
please? Can I send it to you by courier and if so please provide me with the
relevant details.
I look forward to hearing from you.
Kind regards,
Monika WardeckaMonia202 questioned:
could you advise me as to the newt steps please?
Ah, the dangers of trying to save a few bucks. Warranty is only good in the USA for phones purchased in the USA.
Three options.
1. Fly to the US, go to an Apple store, and have the phone swapped.
2. Send the phone to a friend in the US and have them go to the Apple store and have the phone replaced.
3. Buy a new phone in your home country where the warranty is valid. -
I have previously synced my iPod with iTunes, but then I changed my computer and all the backups were there but i had to reinstall itunes and it won't sync, can you help?
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
Today 17th Nov2011.I bought and started downloading Lion. But after a few minutes changed my mind and cancelled the down load. Do I get my money back automaticaly or do I have to fill out a form?
Thanks for your help
P.http://www.apple.com/support/mac/app-store/contact.html
-
When i use the AE2 as an extra wifi point and put the plug in from Time Capsule than the total networks goes down. what do I wrong?
When i use the AE2 as an extra wifi point and put the plug in from Time Capsule than the total networks goes down. what do I wrong?
You likely first configured the AirPort Express to "extend a wireless network" using wireless only, correct?
If yes, you cannot then connect the AirPort Express using Ethernet....that will crash your network.
The Express must be configured to "create a wireless network". AirPort Utility will do this for you automatically, but you will first need to perform a Factory Default Reset or Hard Reset on the AirPort Express and then start over with the configuration again.
Connect the Ethernet cable to the Express before you open AirPort Utility. Post back if you need more tips on how to set this up. -
i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?
I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you -
My ringer volume keeps turning itself up to max and then the volume icon stays on the screen, anyone know how to fix this?
I Have the exact same issue why is there still no fix?!?
Maybe you are looking for
-
Eror in r3: No vendor Specified
Hi , I am facing problem with server proxy for inbound interface . I am getting error"No Vendor Specified" , while activating the server proxy. Thanks In Advance
-
Adobe Muse cc starts as a Testversion
Hi, when i try to start adobe muse cc, it tells me i only can start it as a testversion für 30 days. what can i do!
-
Make editable and non-editable some cells in ALV OO
Hello Experts, i have a table like this: KUNNR DATE VALUE1 And a search button that obtains data, and then display the information in the ALV, like this KUNNR DATE VALUE1 1000 1.1.2009 A 1001 2.2.2009 B Also i have a button that a
-
WEB.SHOW_DOCUMENT parameters trouble
Hi everyone, I'm trying to run a report from a form by a submit button in the form. It does work, I mean, I can see the report after pressing the button, but it works as if there was no parameter, it ignores it completely. I don't really know how to
-
Organizer in PSE 11 hangs on catalog converted from PSE8
I just installed PSE 11 and converted my catalog from PSE 8. I have over 50,000 images in the catalog. Immediately the Organizer starts on the people recognition (I had all Auto-Analyze turned off in PSE8). I am able to cancel the People Recogniti