Keyboard configuration problem.

Hi.
I need help.
I can't use key "del" on my kayboard. It just don't work.
So i have to use alwais "Backspace".
I tried to play with xorg.conf config - no success.
xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbVariant" "nodeadkeys"
EndSection

Ditch the nodeadkeys bit and just leave a double quotes, like so:
Option "XkbVariant" ""
If that doesn't make things right, maybe try pc105 instead of pc104
Last edited by thayer (2008-02-09 21:24:56)

Similar Messages

[SOLVED] Keyboard layout problems

Hi community,
I fresh installed arch linux and I rly like it. After playing a little around and installing the awesome wm I can't set the croatian keyboard layout.
My xorg.config file:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "logicd"
Option "XkbLayout" "hr"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Arnos Instruments F-417"
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
My Xorg.0.log file:
[ 2186.778]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 2186.778]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 2186.778] X Protocol Version 11, Revision 0
[ 2186.778] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 2186.778] Current Operating System: Linux arch 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 2186.778] Kernel command line: root=/dev/sda5 ro
[ 2186.778] Build Date: 21 June 2010 12:01:49PM
[ 2186.778]
[ 2186.779] Current version of pixman: 0.18.2
[ 2186.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2186.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2186.779] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 22 13:23:50 2010
[ 2186.779] (==) Using config file: "/etc/X11/xorg.conf"
[ 2186.779] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2186.779] (==) ServerLayout "Layout0"
[ 2186.779] (**) |-->Screen "Screen0" (0)
[ 2186.779] (**) | |-->Monitor "Monitor0"
[ 2186.779] (**) | |-->Device "Device0"
[ 2186.779] (**) |-->Input Device "Keyboard0"
[ 2186.779] (**) |-->Input Device "Mouse0"
[ 2186.780] (**) Option "Xinerama" "0"
[ 2186.780] (==) Automatically adding devices
[ 2186.780] (==) Automatically enabling devices
[ 2186.780] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2186.780] Entry deleted from font path.
[ 2186.780] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2186.780] Entry deleted from font path.
[ 2186.780] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2186.780] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2186.780] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2186.780] (WW) Disabling Keyboard0
[ 2186.780] (WW) Disabling Mouse0
[ 2186.780] (II) Loader magic: 0x7ce880
[ 2186.780] (II) Module ABI versions:
[ 2186.780] X.Org ANSI C Emulation: 0.4
[ 2186.780] X.Org Video Driver: 7.0
[ 2186.780] X.Org XInput driver : 9.0
[ 2186.780] X.Org Server Extension : 3.0
[ 2186.786] (--) PCI:*(0:1:0:0) 10de:00f1:0000:0000 nVidia Corporation NV43 [GeForce 6600 GT] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
[ 2186.787] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2186.787] (II) LoadModule: "extmod"
[ 2186.787] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2186.787] (II) Module extmod: vendor="X.Org Foundation"
[ 2186.787] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.787] Module class: X.Org Server Extension
[ 2186.787] ABI class: X.Org Server Extension, version 3.0
[ 2186.787] (II) Loading extension MIT-SCREEN-SAVER
[ 2186.787] (II) Loading extension XFree86-VidModeExtension
[ 2186.787] (II) Loading extension XFree86-DGA
[ 2186.787] (II) Loading extension DPMS
[ 2186.787] (II) Loading extension XVideo
[ 2186.787] (II) Loading extension XVideo-MotionCompensation
[ 2186.787] (II) Loading extension X-Resource
[ 2186.787] (II) LoadModule: "dbe"
[ 2186.787] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2186.787] (II) Module dbe: vendor="X.Org Foundation"
[ 2186.787] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.788] Module class: X.Org Server Extension
[ 2186.788] ABI class: X.Org Server Extension, version 3.0
[ 2186.788] (II) Loading extension DOUBLE-BUFFER
[ 2186.788] (II) LoadModule: "glx"
[ 2186.788] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2186.813] (II) Module glx: vendor="NVIDIA Corporation"
[ 2186.813] compiled for 4.0.2, module version = 1.0.0
[ 2186.813] Module class: X.Org Server Extension
[ 2186.813] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
[ 2186.813] (II) Loading extension GLX
[ 2186.813] (II) LoadModule: "record"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2186.814] (II) Module record: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.13.0
[ 2186.814] Module class: X.Org Server Extension
[ 2186.814] ABI class: X.Org Server Extension, version 3.0
[ 2186.814] (II) Loading extension RECORD
[ 2186.814] (II) LoadModule: "dri"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2186.814] (II) Module dri: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.814] ABI class: X.Org Server Extension, version 3.0
[ 2186.814] (II) Loading extension XFree86-DRI
[ 2186.814] (II) LoadModule: "dri2"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2186.814] (II) Module dri2: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.2.0
[ 2186.815] ABI class: X.Org Server Extension, version 3.0
[ 2186.815] (II) Loading extension DRI2
[ 2186.815] (II) LoadModule: "nvidia"
[ 2186.815] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2186.816] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2186.816] compiled for 4.0.2, module version = 1.0.0
[ 2186.816] Module class: X.Org Video Driver
[ 2186.816] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
[ 2186.816] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2186.816] (++) using VT number 7
[ 2186.820] (II) Primary Device is: PCI 01@00:00:0
[ 2186.820] (II) Loading sub module "fb"
[ 2186.820] (II) LoadModule: "fb"
[ 2186.820] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2186.821] (II) Module fb: vendor="X.Org Foundation"
[ 2186.821] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.821] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.821] (II) Loading sub module "wfb"
[ 2186.821] (II) LoadModule: "wfb"
[ 2186.821] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2186.821] (II) Module wfb: vendor="X.Org Foundation"
[ 2186.821] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.821] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.821] (II) Loading sub module "ramdac"
[ 2186.821] (II) LoadModule: "ramdac"
[ 2186.821] (II) Module "ramdac" already built-in
[ 2186.821] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2186.821] (==) NVIDIA(0): RGB weight 888
[ 2186.821] (==) NVIDIA(0): Default visual is TrueColor
[ 2186.821] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2186.821] (**) NVIDIA(0): Option "TwinView" "1"
[ 2186.822] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
[ 2186.822] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
[ 2186.822] (**) NVIDIA(0): Enabling RENDER acceleration
[ 2186.822] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 2186.822] (II) NVIDIA(0): enabled.
[ 2188.363] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 2188.363] (--) NVIDIA(0): Memory: 131072 kBytes
[ 2188.363] (--) NVIDIA(0): VideoBIOS: 05.43.02.39.00
[ 2188.363] (II) NVIDIA(0): Detected AGP rate: 8X
[ 2188.363] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2188.363] (--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
[ 2188.363] (--) NVIDIA(0): Arnos Instruments F-417 (CRT-0)
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0)
[ 2188.363] (--) NVIDIA(0): Arnos Instruments F-417 (CRT-0): 400.0 MHz maximum pixel
[ 2188.363] (--) NVIDIA(0): clock
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0): 155.0 MHz maximum pixel clock
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0): Internal Single Link TMDS
[ 2188.363] (**) NVIDIA(0): TwinView enabled
[ 2188.363] (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, DFP-0
[ 2188.364] (II) NVIDIA(0): Assigned Display Devices: CRT-0, DFP-0
[ 2188.364] (II) NVIDIA(0): Validated modes:
[ 2188.364] (II) NVIDIA(0):
[ 2188.364] (II) NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
[ 2188.364] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[ 2188.364] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 2188.364] (--) NVIDIA(0): option
[ 2188.364] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 2188.364] (--) Depth 24 pixmap format is 32 bpp
[ 2188.365] (II) NVIDIA(0): Initialized AGP GART.
[ 2188.373] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2188.373] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2188.373] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2188.373] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2188.373] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2188.373] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2188.373] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2188.373] (II) NVIDIA(0): Config Options in the README.
[ 2188.373] (II) NVIDIA(0): Setting mode
[ 2188.373] (II) NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
[ 2188.613] (II) Loading extension NV-GLX
[ 2188.657] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 2188.659] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2188.659] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 2188.659] (==) NVIDIA(0): Backing store disabled
[ 2188.659] (==) NVIDIA(0): Silken mouse enabled
[ 2188.660] (**) NVIDIA(0): DPMS enabled
[ 2188.660] (II) Loading extension NV-CONTROL
[ 2188.661] (II) Loading extension XINERAMA
[ 2188.661] (II) Loading sub module "dri2"
[ 2188.661] (II) LoadModule: "dri2"
[ 2188.661] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2188.661] (II) NVIDIA(0): [DRI2] Setup complete
[ 2188.661] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2188.661] (==) RandR enabled
[ 2188.661] (II) Initializing built-in extension Generic Event Extension
[ 2188.661] (II) Initializing built-in extension SHAPE
[ 2188.661] (II) Initializing built-in extension MIT-SHM
[ 2188.661] (II) Initializing built-in extension XInputExtension
[ 2188.661] (II) Initializing built-in extension XTEST
[ 2188.661] (II) Initializing built-in extension BIG-REQUESTS
[ 2188.661] (II) Initializing built-in extension SYNC
[ 2188.661] (II) Initializing built-in extension XKEYBOARD
[ 2188.661] (II) Initializing built-in extension XC-MISC
[ 2188.661] (II) Initializing built-in extension SECURITY
[ 2188.661] (II) Initializing built-in extension XINERAMA
[ 2188.661] (II) Initializing built-in extension XFIXES
[ 2188.661] (II) Initializing built-in extension RENDER
[ 2188.661] (II) Initializing built-in extension RANDR
[ 2188.661] (II) Initializing built-in extension COMPOSITE
[ 2188.661] (II) Initializing built-in extension DAMAGE
[ 2188.664] (II) Initializing extension GLX
[ 2188.842] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2188.842] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2188.842] (II) LoadModule: "evdev"
[ 2188.842] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2188.842] (II) Module evdev: vendor="X.Org Foundation"
[ 2188.842] compiled for 1.8.0, module version = 2.4.0
[ 2188.842] Module class: X.Org XInput Driver
[ 2188.842] ABI class: X.Org XInput driver, version 9.0
[ 2188.842] (**) Power Button: always reports core events
[ 2188.842] (**) Power Button: Device: "/dev/input/event2"
[ 2188.842] (II) Power Button: Found keys
[ 2188.842] (II) Power Button: Configuring as keyboard
[ 2188.842] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2188.842] (**) Option "xkb_rules" "evdev"
[ 2188.843] (**) Option "xkb_model" "evdev"
[ 2188.843] (**) Option "xkb_layout" "us"
[ 2188.883] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2188.883] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2188.883] (**) Power Button: always reports core events
[ 2188.883] (**) Power Button: Device: "/dev/input/event1"
[ 2188.883] (II) Power Button: Found keys
[ 2188.883] (II) Power Button: Configuring as keyboard
[ 2188.883] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2188.883] (**) Option "xkb_rules" "evdev"
[ 2188.883] (**) Option "xkb_model" "evdev"
[ 2188.883] (**) Option "xkb_layout" "us"
[ 2188.887] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2188.887] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2188.887] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2188.887] (II) No input driver/identifier specified (ignoring)
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4)
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.888] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4"
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.888] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.888] (**) Option "xkb_rules" "evdev"
[ 2188.888] (**) Option "xkb_model" "evdev"
[ 2188.888] (**) Option "xkb_layout" "us"
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5)
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.889] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5"
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.889] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.889] (**) Option "xkb_rules" "evdev"
[ 2188.889] (**) Option "xkb_model" "evdev"
[ 2188.889] (**) Option "xkb_layout" "us"
[ 2188.891] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[ 2188.891] (II) No input driver/identifier specified (ignoring)
Xorg.0.log important (I think):
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4)
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.888] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4"
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.888] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.888] (**) Option "xkb_rules" "evdev"
[ 2188.888] (**) Option "xkb_model" "evdev"
[ 2188.888] (**) Option "xkb_layout" "us"
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5)
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.889] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5"
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.889] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.889] (**) Option "xkb_rules" "evdev"
[ 2188.889] (**) Option "xkb_model" "evdev"
[ 2188.889] (**) Option "xkb_layout" "us"
Why is he adding the keyboard 2 times, and why "xkb_layout" "us"? I need hr (croatian).
My first post Sorry, for the bad english.
Last edited by b3no (2010-07-22 23:45:29)

[ 2186.780] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
Add this
Section "ServerFlags"
Option "AllowEmptyInput" "no"
EndSection
EditL If the above didn't help, read this http://wiki.archlinux.org/index.php/Xor … d_settings
Last edited by karol (2010-07-22 12:06:04)

PERFECT solution to Photoshop CC2014 configurator problem

Actually, this is the PERFECT solution to Photoshop CC2014 lack of configurator problem.
I looked around for some program that could put up a window on screen with a row of 'buttons' that you could could program and click on like configurator.
There may be one, but I couldn't find it. So I did a bit of lateral thinking and bought an external device that that has rows of real buttons that you can program with whatever keystroke combinations to like.
I bought a RAZER ORBWEAVER which is as gaming device, but works perfectly with Photoshop - Windows or Mac - and any other software you want shortcuts for. You can get them on Amazon for about $100 though I actually got mine on eBay. There are cheaper similar devices, but the Orbweaver seems pretty tough and gets good reviews. If there isn't a key shortcut for what you want to do, simply go to Edit/Keyboard Shortcuts in Photoshop CC2014 and create one (making sure you use a combination that isn't already in use) Then it's simply a matter of programming the 20 buttons on the Orbweaver to your chosen keystrokes. I have printed a chart to remind me of all the settings.
This means too, that no matter what Adobe do to future software (apart from eliminating ALL keystrokes) this solution is future proof.

Did also some lateral thinking and bought a ShuttlePRO v2...
SUPER !!!
Highly recommended !

Solaris 8 loses keyboard configuration

While installing Solaris 8 on my Dell Latitude laptop, everything works fine until I get to the point that the installation asks me to select the language to be used. When I press "1", the string "^]]229z" is echoed on the screen until the buffer is filled. Since the keyboard works fine up to that point (it allows me to select devices and boot methods) it appears as if the "Solaris Web Start 3.0 Installer" is losing the keyboard configuration. Any suggestions?
Mark Van Tuyl
[email protected]

Hi Mark,
There appears to be a problem with the keyboards on Dell laptops. Currently there is a work around that you might want to try if you want to run Solaris 8 on your machine, and this involves using a USB keyboard for installation and subsequent use. If you wish to give it a try, take a look at the following steps:
1) Attach USB keyboard prior to installation
2) When the language question is asked respond using the USB keyboard for this step and for all other steps.
However after installation finishes the USB keyboard must still be used for operation.
Regards,
Andrew
Sun Developer Technical Support

ISO keyboard configuration

Apple says that it sells Mac Pro with Retina in USA with two options: with 78 (U.S.) or 79 (ISO) keys. Can anyone show me the ISO arrangement and inform me where I can buy a good quality silicone cover for it?

Thanks. I did that but it didn't solve the problem. If anyone has another
suggestion, plaese do not hesitate.
Le 10 janvier 2012 12:55, Barbara B. <[email protected]> a écrit :
Re: Keyboard configuration created by Barbara B.<http://forums.adobe.com/people/Barbara+B.>in
Photoshop Elements - View the full discussion<http://forums.adobe.com/message/4129648#4129648>

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

A possible solution for "foreight language keyboard shortcut" problem...

Hi(Bonjour)!
Everyone know the problem of losy keyboard layout when Final Cut is used with foreight language keyboard. We loose the COMMAND-Q shorcut.
As PieroF suggested in many posts in final cut express forum, there is a workaround:
"+I just installed Leopard and I ran into this keyboard shortcut problem.+
+I can confirm that:+
+a. the problem exists also with the Italian keyboard (in addition to other languages, as pointed by other posters)+
+b. the workaround I described in my previous answer works fine :+
+- close FCE (if open)+
+- open System Preferences/International/Language+
+- drag English to the first place on top of the other languages+
+- drag your own language (Italian in my case) again on top of English (at the end the window will show the same original settings, but something happened in the heart of Leopard...)+
+- close System Preferences+
+- open FCE: now all shortcuts work as expected, and are correctly listed with their corresponding menu commands+
+It's a workaround, it's not convenient (I'd better have this bug fixed), but apparently you have to apply it only once for each system startup.+
Piero "
As stated by Piero, you have to follow this procedure after each computer startup.
I found a way to restore the COMMAND-Q shortcut with the keyboard and mouse system pref panel.
Simply add Final Cut application and add a +custom shotcut+. Be careful to type exactly the "Quit Final Cut Express" menu.
This solution allows to restart the computer.
It's work with Final Cut Express and Final Cut Pro under Leopard 10.5.4.
Michel Boissonneault

Hi Michel,
I like your suggestion because the keyboard shortcuts defined in the system preferences do not require redefinition at each startup. So in theory we could define all missing/wrong shortcuts this way, and not only the cmd-Q as you suggested. Boring, but we could do it once for all.
The only problem is that I don't know how to define shortcuts for submenus, for example "Render Selection/Both": it seems system preferences allows only to define shortcuts for the menu ("Render Selection" - in this case absolutely useless) but not for the submenu.
Do you know a way ? (I looked in the help, which didn't... help).
Piero

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Directory</description>
        <description type="short">Directory</description>
        <description type="tooltip">Directory</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
        <jar href="directory/aii_ibdir_client.jar" />
        <jar href="directory/aii_ibdir_core.jar" />
        <jar href="directory/aii_ibdir_sbeans.jar" />
        <jar href="directory/aii_ibdir_rb.jar" />
        <jar href="directory/aii_ib_client.jar" />
        <jar href="directory/aii_ib_core.jar" />
        <jar href="directory/aii_ib_sbeans.jar" />
        <jar href="directory/aii_ib_rb.jar" />
        <jar href="directory/aii_util_icons.jar" />
        <jar href="directory/aii_util_swing.jar" />
        <jar href="directory/aii_util_xml.jar" />
        <jar href="directory/aii_util_xsd.jar" />
        <jar href="directory/aii_utilxi_misc.jar" />
        <jar href="directory/aii_util_rb.jar" />
        <jar href="directory/clientaii_ib_sbeans.jar" />
        <jar href="directory/clientaii_ibdir_sbeans.jar" />
        <jar href="directory/frog.jar" />
        <jar href="directory/focus14.jar" />
        <jar href="directory/sapxmltoolkit.jar" />
        <jar href="directory/jta.jar" />
        <jar href="directory/ejb20.jar" />
        <jar href="directory/exception.jar" />
        <jar href="directory/logging.jar" />
        <jar href="directory/guidgenerator.jar" />
        <jar href="directory/jperflib.jar" />
        <jar href="directory/sapni.jar" />
        <jar href="directory/sapj2eeclient.jar" />
        <property name="sap.theme" value="Streamline" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
    <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
<b>*******************Reward,if found useful</b>
Edited by: BVS on May 7, 2008 3:01 PM

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Could not start the app due to a configuration problem - Launchpad issue

Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
Mayank

Hi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas

Weird dreamweaver keyboard mapping problem

weird dreamweaver keyboard mapping problem:
Hope this solution helps someone out. If you have q's, ask
and I will try to help.
I was having a weird problem in dreamweaver... Whenever I was
in code view and typed "shift+i" to make a capital "I", instead it
would paste from the clipboard.
I finally figured out what was happening. I compared the
menu.xml in my app support folder in the user library to the
original menu.xml file that was in the application folder. I went
through until I came across the diff:
menu.xml in my library/app support folder:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
orig menu.xml file:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
There was a diff in the "platform=" tags. The orig stated
[platform="win"], my config stated [platform=""] (nothing in
between the ""'s). So, I reset the platform tag to be
[platform="win"] in my settings and then relaunched dreamweaver. It
fixed the problem.
Not sure how this occurred, but it works now.

Can't run form from Form Builder 10g - Port configuration problem?

Hi,
I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
If I enter the frmservlet-URL manually everything seems to be fine.
In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
I assume this is a port configuration problem, but I don't have a clue where to start.
Any suggestions how I should proceed are greatly appreciated.
Thank you very much in advance!

Hi Frank,
Thank you for your reply.
I doublechecked my configuration.
In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
I will now try to set the port number for the frmservlet to 8890.
I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8890" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

     
     
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
     
     <access-log path="../log/default-web-access.log" />
</web-site>
I restart the container, start Form Builder, connect to the database, and open my test form.
When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
Here is the output of netstat:
[root@localhost ~]# netstat -anp --tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 :::22 :::* LISTEN 2968/sshd
tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
[root@localhost ~]#
The question remains: Where do those port numbers come from?
Regards,
jme

Keyboard configuration problem.

Similar Messages

Maybe you are looking for