Keyboard Configuration !!

Hello,
I have installed Solaris 8 x86 edition on My Computer,
and i Have a problem with my keyboard, it is on qwerty, and mine is an Azerty keyboard,
i would like to change it but i don't know how ???
Thanks in advance !!!

During reboot, interrupt the device configuration assistant (DCA) by pressing the ESC key, and configure
the keyboard layout on the second screen, in the device tasks submenu.
This should fix the keyboard layout for the ascii text console.
For the GUI you may have to run "kdmconfig" and configure the keyboard layout for the X11 server.

Similar Messages

Can't find keyboard configuration

Hello,
I have a 3000 N100 model and have re installed the system from scratch using lenovo care. The issue is now that I can't find the exact Keyboard configuration from Regional settings.
Here is the keyboard:
http://imageshack.us/a/img607/9220/img0998kw.jpg
I don't find any information concerning this azerty keyboard. It seems to be a mix from Azerty and Qwerty keyboard.
Can someone help me.
Many thanks.

They can't be modified.
Mylenium

Solaris 8 loses keyboard configuration

While installing Solaris 8 on my Dell Latitude laptop, everything works fine until I get to the point that the installation asks me to select the language to be used. When I press "1", the string "^]]229z" is echoed on the screen until the buffer is filled. Since the keyboard works fine up to that point (it allows me to select devices and boot methods) it appears as if the "Solaris Web Start 3.0 Installer" is losing the keyboard configuration. Any suggestions?
Mark Van Tuyl
[email protected]

Hi Mark,
There appears to be a problem with the keyboards on Dell laptops. Currently there is a work around that you might want to try if you want to run Solaris 8 on your machine, and this involves using a USB keyboard for installation and subsequent use. If you wish to give it a try, take a look at the following steps:
1) Attach USB keyboard prior to installation
2) When the language question is asked respond using the USB keyboard for this step and for all other steps.
However after installation finishes the USB keyboard must still be used for operation.
Regards,
Andrew
Sun Developer Technical Support

ISO keyboard configuration

Apple says that it sells Mac Pro with Retina in USA with two options: with 78 (U.S.) or 79 (ISO) keys. Can anyone show me the ISO arrangement and inform me where I can buy a good quality silicone cover for it?

Thanks. I did that but it didn't solve the problem. If anyone has another
suggestion, plaese do not hesitate.
Le 10 janvier 2012 12:55, Barbara B. <[email protected]> a écrit :
Re: Keyboard configuration created by Barbara B.<http://forums.adobe.com/people/Barbara+B.>in
Photoshop Elements - View the full discussion<http://forums.adobe.com/message/4129648#4129648>

R61i keyboard configuration for Brazilian Portuguese

Hi!
I bought a Thinkpad R61i (7650-A43) at Lenovo, Brazil one month ago.
I reinstalled the Windows Vista (from another DVD, not the rescue disk), then I tried to setup the keyboard in control panel to Portuguese (Brazilian ABNT), but the key ?/° (below :;+ key) didn´t work.
I tried Portuguese (Brasilian ABNT2) but it´s didn´t work, too.
What is the correct keyboard configuration for Brazilian Portuguese in this notebook?
thanks
Message Edited by hitchhiker on 10-07-2008 07:59 AM
Solved!
Go to Solution.

Só faltou uma informação que pode confundir as pessoas, não crie uma chave. Crie um valor binário dentro de "Keyboard Layout".
Roteiro:
Botão direito do mouse em "Keyboard Layout"
Clique em NOVO > VALOR BINARIO > Coloque o nome do valor: Scancode Map > Depois clique para abrir o valor e insira o valor: 00 00 00 00 00 00 00 00 02 00 00 00 73 00 1d e0 00 00 00 00
Clique OK e depois feche o Regedit > Reinicie o computador.
Abraço,
Rodrigo Rosa.
Message Edited by rodrigorosa on 03-16-2009 12:21 PM

Getting keyboard configuration

I'm working on a game in which I need to handle the WASD keys as directionnal key (FPS style) on a QWERTY keyboard.
When launching the game from another computer with different keyboard settings (let's say AZERTY), I'd like to have the keys for the same location (instead of W use Z and instead of A use Q).
I can't put controls in a localization file since the same version of the game will be available in different area.

mdblanton wrote:
I've had my T430s for about 2 weeks now and have been very pleased with it (after getting used to the new keyboard layout). Configuration is i7, 16 GB RAM, 512 GB SSD, and discrete graphics. My only complaint is in battery life which brings me to something I learned today based on comments in similar threads on the board. Battery life has been around 2 hours. Today I went into the BIOS and changed the display setting from Optimus to the Intel graphics option only and battery life has improved to about 4 hours. Is this common?
Thanks,
Michael
Are you running the Lenovo factory image, or a custom OS install?

Shell keyboard configuration

Hello,
I'm using dbxml shell but the keyboard is not well configured
For example, when I click on arrow UP:
dbxml> ^[[A^[[A^[[A^[[A
The same happens with the others arrows, ESC, delete, etc.
Is there any way to configure it correctly? I my Linux environment my keyboard config is fine.
Thanks

hi,
You can run dbxml shell with rlwrap, like this:
$rlwrap dbxml
Ying

Keyboard configuration app

Does anybody know of any program that would let me configure my keyboard (under X11) like the gnome settings one does?
I'm not running any DE and so I'd like a desktop agnostic solution
Thanks

Yes I could use Xmodmap (in fact I'm using it right now) but I want an easy app to change layouts and the like (i.e: swap caps_lock and ctrl... which I've already implemente with Xmodmap)
Any suggestions?
By the way Thanks for replying

Missing keyboard configuration

hello,
i live in switzerland. in the french-speaking region, we use german keyboard layouts (QWERTZ – neither AZERTY nor QWERTY) but we speak… french.
maybe you already understood what my issue is: i'd like to use a QWERTZ layout with a french dictionary.
any ideas how it could be done?
thanks in advance

Hey, thanks for the try, but this doesn't solve the problem at all:
–international/language simply changes the language of the user interface. it doesn't affect sms writing.
–international/region format affects only the way phone numbers, dates, etc are displayed
–international/keyboards lets you choose between keyboards, but you can't unbind the keyboard from the corresponding dictionary.
what we need is a german keyboard (qwertz) with a french dictionary. the french keyboard won't do at all (azerty). the best workaround is the french-canadian keyboard, which is an american layout (qwerty) with a french dictionary.
well,

Keyboard configuration problem.

Hi.
I need help.
I can't use key "del" on my kayboard. It just don't work.
So i have to use alwais "Backspace".
I tried to play with xorg.conf config - no success.
xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbVariant" "nodeadkeys"
EndSection

Ditch the nodeadkeys bit and just leave a double quotes, like so:
Option "XkbVariant" ""
If that doesn't make things right, maybe try pc105 instead of pc104
Last edited by thayer (2008-02-09 21:24:56)

[SOLVED]How configure keyboard configuration to kill Cinnamon Desktop.

Hello I have installed Cinnamon desktop and i try enable ctrl+Alt+Backspace to kill it, passing terminate:ctrl_alt_bksp to XkbOptions.
https://wiki.archlinux.org/index.php/Ke … on_in_Xorg
This is my 10-keyboard.conf.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "es"
Option "XkbModel" "pc104"
Option "XkbVariant" "deadtilde, dvorak"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
I try.... :
Section .....
Option "XkbOptions" "grp:alt_shift_toggle, terminate:ctrl_alt_bksp"
or ..
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
...but no result. Any idea to enable to enable Ctrl+Alt+Backspace.
Edit:
Finally i switched the displays manager gdm by sddm...and this config works perfectly:
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "es"
Option "XkbModel" "pc104"
Option "XkbVariant" "deadtilde, dvorak"
Option "XkbOptions" "grp:alt_shift_toggle, terminate:ctrl_alt_bksp"
EndSection
Thanks.
Last edited by colegui (2015-02-15 22:36:05)

Sorry, I feel like I should have done some more googling but it only occured to me while writing this post that other universities use eduroam. With a quick google search I found a solution.I will redeam myself by posting my solution.
1. ip link set wlan0 up where wlan0 is your wireless interface you are trying to connect from.
2. Create/edit /etc/wpa_supplicant.conf to look like:
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="eduroam"
scan_ssid="eduroam"
proto=RSN
key_mgmt=WPA-EAP
pairwise=CCMP
group=CCMP
eap=PEAP
identity="abc1@university_name.ac.uk"
password="PASSWORD"
ca_cert="/usr/share/ca-certificates/mozilla/GlobalSign_Root_CA.crt"
phase2="auth=MSCHAPV2"
3. As root:
wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
4. then dhcpcd wlan0 again where wlan0 is the interface you are trying to connect from.
Last edited by tatskaari (2012-11-21 03:10:23)

Diacritical marks for International Keyboard configurations

So where are the accents (igrecs and igravs) for French? Also how can you download other International keyboards? And if you can, will they be missing diacritical marks above words too; such as the fáda for Irish?

Hmm I just wanted the Irish keyboard to put a fáda over the vowels.
You don't need any special keyboard to do that. áéíóú are available on the iPod Touch by holding down the base letter. A menu of accented versions of the base letter then appears which you can choose from.
Anyway my cousin said the unicode for the french igrecs and igravs is probably different anyway so they wouldn't work as a substitute.
French would work fine. The diacritics are exactly the same in Unicode.
I was just curious if Apple has support for international keyboards.
Yes, the full OS X has dozens of keyboard layouts.
But I guess what the iPod touch has on it is very rudimentary so it wouldn't bother with most keyboards. I'm not even sure if I saw Korean on it. It seemed to only have Japanese.
Because of the method the iPod Touch uses (i.e. an extra menu of variations for each character), there's no need for a lot of keyboards to cover a lot of languages. But it is still limited to W. European, E. European, and Japanese at this time. Cyrillic, Greek, Arabic, Hebrew, Korean, Chinese, Indic, Thai, Vietnamese, and various other languages cannot yet be input.

Change keyboard configuration for special keys

Hi guys,
I want to change the default behaviour for some special keys when running windows.
I want the Cmd (Mac) key to be the Alt (Win) key and the Fn (Mac) key to be the Ctrl (Win) key.
Is this possible?

Thanks for your answer Fortuny, but it seems the Ctrl and Alt keys can't be re-mapped using that application... I'll keep searching
Edit: You pointed me in the right direction I found a similar application to the MSKLC called SharpKeys, I was not able to edit the Fn key, but at least a could remap the left Cmd key to be the Alt key.
Message was edited by: Apolyon

[HELP] rc.conf configuration - English System, with French keyboard

Hi
I just finished the first part of the Arch installation.
I'm a french user, and I want to do something different than the last installation
I would use my system (TTY, Desktop environment in ENGLISH) but I want use my french keyboard (Azerty).
Also, I have some files (music, movie) who contains special caracters like "é,ç,è" and I would be able to play theses files using VLC, Sonata...
I've looked the wiki, and i'm curently configuring my rc.conf but I don't know what put in.
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="US/Eastern"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
Can you help me ? Gives me the right thing to add my rc.conf please ?
Does the lines CONSOLEFONT, LOCALE, & CONSOLEMAP depend on my keyboard configuration ?
Also need help to configure the locale.gen file
Sorry for my english, I don't speak english well :S

I use the same setup, and I found the archlinux.fr wiki to be really helpful.
I have those set in rc. conf :
KEYMAP="fr-latin9"
CONSOLEFONT="lat9w-16"
Then just read through those two pages, they contain everything you need. Just skip the parts about setting the french locale and such.
http://wiki.archlinux.fr/install/langue … 8cc2e10dbf
http://wiki.archlinux.fr/howto/indispensable/xorg
Last edited by Shunpike (2009-04-06 13:55:32)

Edev configuring keyboard as mouse

Hello,
I'm having some trouble with edev. For some strange reason edev/xorg seems to be configuring my keyboard as a keyboard then as a mouse, forcing x & y axis and the rest. Also my power button as a keyboard it seems. Not sure how to stop this.
My mouse also seems to be configuring multiple times. I'm using the razercfg tool to config that.
Can anyone help?
Heres my Xorg.0.log
[ 7.644]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.644] X Protocol Version 11, Revision 0
[ 7.644] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.644] Current Operating System: Linux breakage 3.10.7-1-ARCH #1 SMP PREEMPT Thu Aug 15 11:55:34 CEST 2013 x86_64
[ 7.644] Kernel command line: root=/dev/sda2 rw initrd=/initramfs-linux.img
[ 7.644] Build Date: 01 July 2013 10:48:42AM
[ 7.644]
[ 7.644] Current version of pixman: 0.30.2
[ 7.644] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.644] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.644] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 21 09:59:45 2013
[ 7.711] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.732] (==) ServerLayout "Layout0"
[ 7.732] (**) |-->Screen "Screen0" (0)
[ 7.732] (**) | |-->Monitor "Monitor0"
[ 7.732] (**) | |-->Device "Device0"
[ 7.732] (**) Option "Xinerama" "0"
[ 7.732] (==) Automatically adding devices
[ 7.732] (==) Automatically enabling devices
[ 7.732] (==) Automatically adding GPU devices
[ 7.853] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 7.853] Entry deleted from font path.
[ 7.853] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.853] Entry deleted from font path.
[ 7.853] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.853] Entry deleted from font path.
[ 7.853] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.854] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.854] Entry deleted from font path.
[ 7.854] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.854] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 7.854] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.854] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.854] (II) Loader magic: 0x7fdc20
[ 7.854] (II) Module ABI versions:
[ 7.854] X.Org ANSI C Emulation: 0.4
[ 7.854] X.Org Video Driver: 14.1
[ 7.854] X.Org XInput driver : 19.1
[ 7.854] X.Org Server Extension : 7.0
[ 7.855] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.857] (--) PCI:*(0:1:0:0) 10de:11c0:1462:2871 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.857] Initializing built-in extension Generic Event Extension
[ 7.857] Initializing built-in extension SHAPE
[ 7.857] Initializing built-in extension MIT-SHM
[ 7.858] Initializing built-in extension XInputExtension
[ 7.858] Initializing built-in extension XTEST
[ 7.858] Initializing built-in extension BIG-REQUESTS
[ 7.858] Initializing built-in extension SYNC
[ 7.858] Initializing built-in extension XKEYBOARD
[ 7.858] Initializing built-in extension XC-MISC
[ 7.858] Initializing built-in extension SECURITY
[ 7.858] Initializing built-in extension XINERAMA
[ 7.858] Initializing built-in extension XFIXES
[ 7.858] Initializing built-in extension RENDER
[ 7.858] Initializing built-in extension RANDR
[ 7.858] Initializing built-in extension COMPOSITE
[ 7.858] Initializing built-in extension DAMAGE
[ 7.858] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.858] Initializing built-in extension DOUBLE-BUFFER
[ 7.858] Initializing built-in extension RECORD
[ 7.858] Initializing built-in extension DPMS
[ 7.858] Initializing built-in extension X-Resource
[ 7.858] Initializing built-in extension XVideo
[ 7.858] Initializing built-in extension XVideo-MotionCompensation
[ 7.858] Initializing built-in extension XFree86-VidModeExtension
[ 7.858] Initializing built-in extension XFree86-DGA
[ 7.858] Initializing built-in extension XFree86-DRI
[ 7.858] Initializing built-in extension DRI2
[ 7.858] (II) LoadModule: "glx"
[ 7.926] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.859] (II) Module glx: vendor="NVIDIA Corporation"
[ 8.859] compiled for 4.0.2, module version = 1.0.0
[ 8.859] Module class: X.Org Server Extension
[ 8.859] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 8.866] Loading extension GLX
[ 8.866] (II) LoadModule: "nvidia"
[ 8.866] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 8.913] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 8.913] compiled for 4.0.2, module version = 1.0.0
[ 8.913] Module class: X.Org Video Driver
[ 8.919] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 8.919] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 8.919] (++) using VT number 7
[ 8.925] (II) Loading sub module "fb"
[ 8.925] (II) LoadModule: "fb"
[ 8.933] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.942] (II) Module fb: vendor="X.Org Foundation"
[ 8.942] compiled for 1.14.2, module version = 1.0.0
[ 8.942] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.942] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 8.942] (II) Loading sub module "wfb"
[ 8.942] (II) LoadModule: "wfb"
[ 8.942] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 8.952] (II) Module wfb: vendor="X.Org Foundation"
[ 8.952] compiled for 1.14.2, module version = 1.0.0
[ 8.952] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.952] (II) Loading sub module "shadow"
[ 8.952] (II) LoadModule: "shadow"
[ 8.952] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 8.953] (II) Module shadow: vendor="X.Org Foundation"
[ 8.953] compiled for 1.14.2, module version = 1.1.0
[ 8.953] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.953] (II) Loading sub module "ramdac"
[ 8.953] (II) LoadModule: "ramdac"
[ 8.953] (II) Module "ramdac" already built-in
[ 8.956] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 8.956] (==) NVIDIA(0): RGB weight 888
[ 8.956] (==) NVIDIA(0): Default visual is TrueColor
[ 8.956] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.957] (**) NVIDIA(0): Option "Stereo" "0"
[ 8.957] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-3"
[ 8.957] (**) NVIDIA(0): Option "SLI" "Off"
[ 8.957] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 8.957] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 8.957] (**) NVIDIA(0): Stereo disabled by request
[ 8.957] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 8.957] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 8.958] (**) NVIDIA(0): Option "MetaModes" "1920x1080_120 +0+0"
[ 8.958] (**) NVIDIA(0): Enabling 2D acceleration
[ 9.582] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 9.600] (II) NVIDIA(GPU-0): Display (LG Electronics W2363D (DFP-3)) supports NVIDIA 3D
[ 9.600] (II) NVIDIA(GPU-0): Vision stereo.
[ 9.600] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[ 9.600] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 9.600] (--) NVIDIA(0): VideoBIOS: 80.06.28.00.39
[ 9.600] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 9.611] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[ 9.611] (--) NVIDIA(0): CRT-0
[ 9.611] (--) NVIDIA(0): DFP-0
[ 9.611] (--) NVIDIA(0): DFP-1
[ 9.611] (--) NVIDIA(0): DFP-2
[ 9.611] (--) NVIDIA(0): LG Electronics W2363D (DFP-3) (boot, connected)
[ 9.611] (--) NVIDIA(0): DFP-4
[ 9.611] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 9.611] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 9.611] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 9.611] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 9.611] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 9.611] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 9.611] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 9.611] (--) NVIDIA(0): LG Electronics W2363D (DFP-3): 330.0 MHz maximum pixel clock
[ 9.611] (--) NVIDIA(0): LG Electronics W2363D (DFP-3): Internal Dual Link TMDS
[ 9.611] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[ 9.611] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 9.611] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 9.611] (**) NVIDIA(0): device LG Electronics W2363D (DFP-3) (Using EDID
[ 9.611] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 9.612] (II) NVIDIA(0): Validated MetaModes:
[ 9.612] (II) NVIDIA(0): "1920x1080_120+0+0"
[ 9.612] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 9.660] (--) NVIDIA(0): DPI set to (95, 97); computed from "UseEdidDpi" X config
[ 9.660] (--) NVIDIA(0): option
[ 9.660] (--) Depth 24 pixmap format is 32 bpp
[ 9.661] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 9.661] (II) NVIDIA: access.
[ 9.668] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 9.668] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 9.668] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 9.668] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 9.668] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 9.668] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 9.668] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 9.668] (II) NVIDIA(0): Config Options in the README.
[ 9.673] (II) NVIDIA(0): Setting mode "1920x1080_120+0+0"
[ 9.710] Loading extension NV-GLX
[ 9.732] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 9.732] (==) NVIDIA(0): Backing store disabled
[ 9.732] (==) NVIDIA(0): Silken mouse enabled
[ 9.732] Loading extension NV-CONTROL
[ 9.733] Loading extension XINERAMA
[ 9.733] (II) Loading sub module "dri2"
[ 9.733] (II) LoadModule: "dri2"
[ 9.733] (II) Module "dri2" already built-in
[ 9.733] (II) NVIDIA(0): [DRI2] Setup complete
[ 9.733] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 9.733] (--) RandR disabled
[ 9.744] (II) Initializing extension GLX
[ 10.098] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10.098] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.098] (**) Power Button: Applying InputClass "Keyboard"
[ 10.098] (II) LoadModule: "evdev"
[ 10.099] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.110] (II) Module evdev: vendor="X.Org Foundation"
[ 10.110] compiled for 1.14.2, module version = 2.8.1
[ 10.110] Module class: X.Org XInput Driver
[ 10.110] ABI class: X.Org XInput driver, version 19.1
[ 10.110] (II) Using input driver 'evdev' for 'Power Button'
[ 10.110] (**) Power Button: always reports core events
[ 10.110] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.110] (--) evdev: Power Button: Found keys
[ 10.110] (II) evdev: Power Button: Configuring as keyboard
[ 10.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.110] (**) Option "xkb_rules" "evdev"
[ 10.110] (**) Option "xkb_model" "pc104"
[ 10.110] (**) Option "xkb_layout" "gb"
[ 10.144] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 10.144] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.144] (**) Power Button: Applying InputClass "Keyboard"
[ 10.144] (II) Using input driver 'evdev' for 'Power Button'
[ 10.144] (**) Power Button: always reports core events
[ 10.144] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 10.144] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.144] (--) evdev: Power Button: Found keys
[ 10.144] (II) evdev: Power Button: Configuring as keyboard
[ 10.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 10.144] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.144] (**) Option "xkb_rules" "evdev"
[ 10.144] (**) Option "xkb_model" "pc104"
[ 10.144] (**) Option "xkb_layout" "gb"
[ 10.145] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10.145] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[ 10.145] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.145] (**) Logitech USB Keyboard: Applying InputClass "Keyboard"
[ 10.145] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 10.145] (**) Logitech USB Keyboard: always reports core events
[ 10.145] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"
[ 10.145] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 10.145] (--) evdev: Logitech USB Keyboard: Found keys
[ 10.145] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 10.145] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2:1.0/input/input0/event0"
[ 10.145] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 10.145] (**) Option "xkb_rules" "evdev"
[ 10.145] (**) Option "xkb_model" "pc104"
[ 10.145] (**) Option "xkb_layout" "gb"
[ 10.145] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 10.145] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.145] (**) Logitech USB Keyboard: Applying InputClass "Keyboard"
[ 10.145] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 10.145] (**) Logitech USB Keyboard: always reports core events
[ 10.145] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 10.145] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 10.145] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 10.145] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 10.145] (--) evdev: Logitech USB Keyboard: Found keys
[ 10.145] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 10.145] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 10.145] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 10.145] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2:1.1/input/input1/event1"
[ 10.145] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 10.145] (**) Option "xkb_rules" "evdev"
[ 10.145] (**) Option "xkb_model" "pc104"
[ 10.145] (**) Option "xkb_layout" "gb"
[ 10.146] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 10.146] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 10.146] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 10.146] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 10.146] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 10.146] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 10.146] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 10.146] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 10.146] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 10.146] (**) Razer Razer DeathAdder: always reports core events
[ 10.146] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 10.146] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 10.146] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 10.146] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 10.146] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 10.146] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 10.146] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 10.146] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 10.146] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 10.146] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input7/event2"
[ 10.146] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 10.146] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 10.146] (**) Option "AccelerationScheme" "none"
[ 10.146] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 10.146] (**) Option "AccelerationNumerator" "1"
[ 10.146] (**) Option "AccelerationDenominator" "1"
[ 10.146] (**) Option "AccelerationThreshold" "0"
[ 10.146] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 10.146] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 10.146] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 10.146] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 10.146] (II) No input driver specified, ignoring this device.
[ 10.146] (II) This device may have been added with another device file.
[ 10.151] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 10.151] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 10.151] (II) No input driver specified, ignoring this device.
[ 10.151] (II) This device may have been added with another device file.
[ 10.151] (II) config/udev: removing device Razer Razer DeathAdder
[ 10.236] (II) evdev: Razer Razer DeathAdder: Close
[ 10.236] (II) UnloadModule: "evdev"
[ 10.237] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 10.237] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 10.237] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 10.237] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 10.237] (**) Razer Razer DeathAdder: always reports core events
[ 10.237] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 10.237] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 10.237] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 10.237] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 10.237] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 10.237] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 10.237] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 10.237] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 10.237] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 10.237] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.237] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input7/event2"
[ 10.237] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 10.237] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 10.238] (**) Option "AccelerationScheme" "none"
[ 10.238] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 10.238] (**) Option "AccelerationNumerator" "1"
[ 10.238] (**) Option "AccelerationDenominator" "1"
[ 10.238] (**) Option "AccelerationThreshold" "0"
[ 10.238] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 10.238] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 406.264] (II) config/udev: removing device Razer Razer DeathAdder
[ 406.303] (II) evdev: Razer Razer DeathAdder: Close
[ 406.303] (II) UnloadModule: "evdev"
[ 406.320] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 406.321] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 406.321] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 406.321] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 406.321] (**) Razer Razer DeathAdder: always reports core events
[ 406.321] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 406.321] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 406.321] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 406.321] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 406.321] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 406.321] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 406.321] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 406.321] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 406.321] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 406.321] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 406.321] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input8/event2"
[ 406.321] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 406.321] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 406.322] (**) Option "AccelerationScheme" "none"
[ 406.322] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 406.322] (**) Option "AccelerationNumerator" "1"
[ 406.322] (**) Option "AccelerationDenominator" "1"
[ 406.322] (**) Option "AccelerationThreshold" "0"
[ 406.322] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 406.322] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 406.322] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 406.322] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 406.322] (II) No input driver specified, ignoring this device.
[ 406.322] (II) This device may have been added with another device file.
[ 408.822] (II) config/udev: removing device Razer Razer DeathAdder
[ 408.858] (II) evdev: Razer Razer DeathAdder: Close
[ 408.858] (II) UnloadModule: "evdev"
[ 408.878] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 408.878] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 408.878] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 408.878] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 408.878] (**) Razer Razer DeathAdder: always reports core events
[ 408.878] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 408.878] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 408.878] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 408.878] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 408.878] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 408.878] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 408.878] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 408.878] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 408.878] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 408.878] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 408.878] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input9/event2"
[ 408.878] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 408.878] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 408.879] (**) Option "AccelerationScheme" "none"
[ 408.879] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 408.879] (**) Option "AccelerationNumerator" "1"
[ 408.879] (**) Option "AccelerationDenominator" "1"
[ 408.879] (**) Option "AccelerationThreshold" "0"
[ 408.879] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 408.879] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 408.879] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 408.880] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 408.880] (II) No input driver specified, ignoring this device.
[ 408.880] (II) This device may have been added with another device file.
[ 410.424] (II) config/udev: removing device Razer Razer DeathAdder
[ 410.457] (II) evdev: Razer Razer DeathAdder: Close
[ 410.457] (II) UnloadModule: "evdev"
[ 410.477] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 410.477] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 410.477] (II) No input driver specified, ignoring this device.
[ 410.477] (II) This device may have been added with another device file.
[ 410.477] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 410.477] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 410.477] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 410.477] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 410.477] (**) Razer Razer DeathAdder: always reports core events
[ 410.477] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 410.477] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 410.477] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 410.477] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 410.477] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 410.477] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 410.477] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 410.477] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 410.477] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 410.477] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 410.477] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input10/event2"
[ 410.477] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 410.478] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 410.478] (**) Option "AccelerationScheme" "none"
[ 410.478] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 410.478] (**) Option "AccelerationNumerator" "1"
[ 410.478] (**) Option "AccelerationDenominator" "1"
[ 410.478] (**) Option "AccelerationThreshold" "0"
[ 410.478] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 410.478] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 411.144] (II) config/udev: removing device Razer Razer DeathAdder
[ 411.183] (II) evdev: Razer Razer DeathAdder: Close
[ 411.184] (II) UnloadModule: "evdev"
[ 411.478] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 411.478] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 411.478] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 411.478] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 411.478] (**) Razer Razer DeathAdder: always reports core events
[ 411.478] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 411.478] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 411.478] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 411.478] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 411.478] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 411.478] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 411.478] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 411.478] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 411.478] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 411.478] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 411.478] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input11/event2"
[ 411.478] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 411.478] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 411.479] (**) Option "AccelerationScheme" "none"
[ 411.479] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 411.479] (**) Option "AccelerationNumerator" "1"
[ 411.479] (**) Option "AccelerationDenominator" "1"
[ 411.479] (**) Option "AccelerationThreshold" "0"
[ 411.479] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 411.479] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 411.479] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 411.479] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 411.479] (II) No input driver specified, ignoring this device.
[ 411.479] (II) This device may have been added with another device file.
[ 418.961] (II) config/udev: removing device Razer Razer DeathAdder
[ 419.000] (II) evdev: Razer Razer DeathAdder: Close
[ 419.000] (II) UnloadModule: "evdev"
[ 419.020] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 419.020] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 419.020] (II) No input driver specified, ignoring this device.
[ 419.020] (II) This device may have been added with another device file.
[ 419.021] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 419.021] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 419.021] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 419.021] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 419.021] (**) Razer Razer DeathAdder: always reports core events
[ 419.021] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 419.021] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 419.021] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 419.021] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 419.021] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 419.021] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 419.021] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 419.021] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 419.021] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 419.021] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 419.021] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input12/event2"
[ 419.021] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 419.021] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 419.022] (**) Option "AccelerationScheme" "none"
[ 419.022] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 419.022] (**) Option "AccelerationNumerator" "1"
[ 419.022] (**) Option "AccelerationDenominator" "1"
[ 419.022] (**) Option "AccelerationThreshold" "0"
[ 419.022] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 419.022] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 422.024] (II) config/udev: removing device Razer Razer DeathAdder
[ 422.070] (II) evdev: Razer Razer DeathAdder: Close
[ 422.070] (II) UnloadModule: "evdev"
[ 422.071] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 422.071] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 422.071] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 422.071] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 422.071] (**) Razer Razer DeathAdder: always reports core events
[ 422.071] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 422.071] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 422.071] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 422.071] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 422.071] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 422.071] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 422.071] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 422.071] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 422.071] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 422.071] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 422.071] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input13/event2"
[ 422.071] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 422.071] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 422.072] (**) Option "AccelerationScheme" "none"
[ 422.072] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 422.072] (**) Option "AccelerationNumerator" "1"
[ 422.072] (**) Option "AccelerationDenominator" "1"
[ 422.072] (**) Option "AccelerationThreshold" "0"
[ 422.072] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 422.072] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 422.072] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 422.072] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 422.072] (II) No input driver specified, ignoring this device.
[ 422.072] (II) This device may have been added with another device file.
[ 546.744] (II) config/udev: removing device Razer Razer DeathAdder
[ 546.773] (II) evdev: Razer Razer DeathAdder: Close
[ 546.774] (II) UnloadModule: "evdev"
[ 546.792] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 546.792] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 546.792] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 546.792] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 546.792] (**) Razer Razer DeathAdder: always reports core events
[ 546.792] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 546.792] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 546.792] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 546.792] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 546.792] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 546.792] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 546.792] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 546.792] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 546.792] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 546.792] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 546.792] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input14/event2"
[ 546.792] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 546.792] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 546.793] (**) Option "AccelerationScheme" "none"
[ 546.793] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 546.793] (**) Option "AccelerationNumerator" "1"
[ 546.793] (**) Option "AccelerationDenominator" "1"
[ 546.793] (**) Option "AccelerationThreshold" "0"
[ 546.793] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 546.793] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 546.793] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 546.793] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 546.793] (II) No input driver specified, ignoring this device.
[ 546.793] (II) This device may have been added with another device file.
[ 548.904] (II) config/udev: removing device Razer Razer DeathAdder
[ 548.943] (II) evdev: Razer Razer DeathAdder: Close
[ 548.943] (II) UnloadModule: "evdev"
[ 548.964] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 548.964] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 548.964] (II) No input driver specified, ignoring this device.
[ 548.964] (II) This device may have been added with another device file.
[ 548.964] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 548.964] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 548.964] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 548.964] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 548.964] (**) Razer Razer DeathAdder: always reports core events
[ 548.964] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 548.964] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 548.964] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 548.964] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 548.964] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 548.964] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 548.964] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 548.964] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 548.964] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 548.964] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 548.964] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input15/event2"
[ 548.964] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 548.965] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 548.965] (**) Option "AccelerationScheme" "none"
[ 548.965] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 548.965] (**) Option "AccelerationNumerator" "1"
[ 548.965] (**) Option "AccelerationDenominator" "1"
[ 548.965] (**) Option "AccelerationThreshold" "0"
[ 548.965] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 548.965] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 551.904] (II) config/udev: removing device Razer Razer DeathAdder
[ 551.943] (II) evdev: Razer Razer DeathAdder: Close
[ 551.943] (II) UnloadModule: "evdev"
[ 551.961] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 551.961] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 551.961] (II) No input driver specified, ignoring this device.
[ 551.961] (II) This device may have been added with another device file.
[ 551.962] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 551.962] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 551.962] (**) Razer Razer DeathAdder: Applying InputClass "Mouse"
[ 551.962] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 551.962] (**) Razer Razer DeathAdder: always reports core events
[ 551.962] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 551.963] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 551.963] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 551.963] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 551.963] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 551.963] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 551.963] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 551.963] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 551.963] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 551.963] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 551.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb6/6-4/6-4:1.0/input/input16/event2"
[ 551.963] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 551.963] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 551.963] (**) Option "AccelerationScheme" "none"
[ 551.963] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 551.963] (**) Option "AccelerationNumerator" "1"
[ 551.963] (**) Option "AccelerationDenominator" "1"
[ 551.963] (**) Option "AccelerationThreshold" "0"
[ 551.963] (**) Razer Razer DeathAdder: (accel) acceleration factor: 1.000
[ 551.964] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 0
[ 603.745] (II) NVIDIA(GPU-0): Display (LG Electronics W2363D (DFP-3)) supports NVIDIA 3D
[ 603.745] (II) NVIDIA(GPU-0): Vision stereo.
Cheers.
Last edited by Breakage (2013-08-21 09:28:20)

I'm currently using pointerkeys when I don't have a USB mouse with me because my touchpad seems electronically dead.
I didn't want to merge the pointerkeys settings with the keyboard layout configuration so I created the file /etc/X11/xorg.conf.d/20-pointerkeys.conf:
Section "InputClass"
Identifier "PointerKeys"
MatchIsKeyboard "yes"
Option "XkbOptions" "keypad:pointerkeys"
EndSection
Pointerkeys are disabled by default at boot time, but you can simply enable them by pressing Shift+NumLock ( I think it's customizable).
When the pointerkeys are enabled your numpad works as a three buttons mouse. Don't expect it to change the numlock setting, when you press Shift+Numlock the NumLock led stays exactly the same.
1,2,3,4,6,7,8,9 are used to move the cursor around
5 is used to trigger a single click, or a double click if you're quick enough
pressing 0 is like clicking and holding the button down, so you can use it for drag'n'drop. press 5 to release
slash, asterisk and minus select which button are you going to click with 5.
/ selects the left button
* the middle button
- the right button
The movements acceleration and so on can be customized, but I never tried.
Pointerkeys are not very comfortable, but they're really helpful for emergencies as most GUI applications are not really keyboard-friendly.

Keyboard Configuration !!

Similar Messages

Maybe you are looking for