Keyboard connection question
I just got a yamaha MO8 keyboard, and i was wondering how i could play the sounds from the keyboard on to logic, i know how to use it MIDI, but thats what i am not looking for. If anyone can help me out i would appreciate that very much.....
Hi,
You need to physicaly connect the audio output of your synth, and then create a new track to record this audio into Logic.
This is what is called "recording audio", there's a whole chapter dedicated just for this...
Cheers
Similar Messages
-
Jampack and keyboard connection questions
2 questions:
1. I have just bought GB Jampack (the one with lots of extra loops), but can't seem to notice any difference. How do I know that the disc has downloaded OK? Can't remember how many loops were there in the first place!
2. I'm trying to connect an Roland SK-50 Soundcanvas keyboard. Do I need some sort of interface or drivers before it will work?
Very basic questions, I know, but hey, that's what this discussion group is for isn't it?!
Regards
MarkHow do I know that the disc has downloaded OK?
If you bought the JamPack DVD you didn't download anything. Did you run the installer on the JamPack DVD?
To see just loops from your JamPack disc, open the Loop Browser and click on the top bar where it likely says "Loops" with a double arrow, and select "JamPack 1". Then only loops from the JamPack will show in the loop browser.
Re: the Keyboard
What kind of conection doesd it have? All I could find was " complete with direct Mac or PC connection" and "Connections: MIDI In, MIDI Out, MIDI Thru, Line In (LR), Line Out (LR), Computer port, and 1/8" stereo headphones jack."
"Computer Port" isn't very specific. Is it a USB connection? You might need to find a driver for it. Does the Manual say anything about installing software to make it work?
--HangTime [Will Compute for Food] B-)> -
Wireless keyboard connected but can't type in password
I updated from an iOS 10.8 to 10.9 recently after my hard drive crashed and had to get replaced. I have connected the wireless keyboard connected but I can't type in certain key letters. I can only type in numbers and the middle set of letters. The other letters which I can't type into as my password.
Hello amandateavy,
It sounds like your bluetooth keyboard is connected but only some of the keys on it work. I recommend starting by performing a PRAM reset, and then booting to Safe Boot:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information.
And:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
Take care,
Sterling -
No wireless keyboard connection after installing lion
Before installing the lion, everything was working perfectly; my keyboard, mouse and trackpad. Then after installing the lion, the keyboard could be detected, but not be connected. What should I do?
It works fine now whit out any setting .I just plug the apple keyboard(wire) and try to do the set up .it (Wireless keyboard) connected automatic .so still need the wire keyboard around for few days and see .thx
-
Lossing keyboard connection repeatedly with Mac
Heads up; If you keep lossing a keyboard connection, try replacing your rechargeable batteries. The System Preferences said the batteries were at 100% but the wireless connection would be lost and reconnecting every 30 seconds or so.
Great tip David, thanks!
-
Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?
Julien-
I have the Apple MC184LL/A Bluetooth Wireless Keyboard. The brigtness control works with mine, as do most of the other functions.
Try cycling the keyboard off and on. Hold the power button until the green LED goes out. Then press it one more time to turn it back on.
You might try resetting the iPad's network. Go to Settings-General-Reset-Reset Network Settings. Then you may need to reconnect your WiFi and Bluetooth.
If that doesn't help, try resetting/rebooting the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart in a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred -
Firewire Connection Question (HEEEEEEEEEEEEELLLLLLLLLLLLLLLLPPPPPP!!!)
OK. So I am relatively new to the mac world. I have a question regarding firewire connection. So I had an imac prior to my new macbook. I wanted to transfer my stuff over through firewire but there's a problem. The screen on my Imac stopped working. It still powers up and everything, but no screen. Could someone tell me is there a way to get the hard drive of my Imac up on my macbook screen WITHOUT using the Imac screen? If no, what could/should I do? HEEEEEEEEELLLLLLLLLLLLPPPPPP!!!
Thanks guys!
James, extreme newbie.@discounteggroll...
I have found this to be the solution to connecting macs via firewire... but I have yet to see my imac show up as a hard drive on the macbook pro I am trying to send large video files to.
I have plugged, unplugged and restarted everything several times. Unplugged all other devices outside of my keyboard. Even tried making the macbook pro the 'hard drive' but nothing is working. I am using a 400 to 800 firewire cable. On the macbook I have snow leopard, and the iMac has Tiger. I don't know if the OS has to be the same or not.
I am super frustrated because I don't have the $$ to run out and get another hard drive and it seems like your solution should just work.
Any ideas on how to fix??
Thanks in advance!!
-jp -
The first day I got it, it was fine. Then when I woke up the next day which was less than 12 hours after hooking it up, it wouldn't connect..it let me type a couple of characters to my password, but then literally stopped. My trackpad has yet to have any issues whatsoever. Even during the keyboard malfunctioning it's been fine. In order to get the keyboard to work, I have to log into the guest account, let it be discovered, then pair it. It as now happened on 4 different days, more times than that, though. I've only had it for just over a week. I don't think there's a problem with the computer just because the trackpad is fine. The keyboard blinks that little green light when it's having this issue, too. As you know, it's normally off. Today I tried to log in for the first time and it did the same thing as the first day. It let me type a few characters, then stopped and wouldn't connect. This time, though, when I went into the guest account to let it be discovered it wouldn't let me type the numeric code to pair it. I had to hold down my power button to restart it because I was logged in on another user and it wouldn't let me restart it the normal way without typing the admin username/password...which I obviously couldn't do seeing as how I didn't have a keyboard. Does anyone else think this is a faulty keyboard I need to return? Or is this unfortunately how it works...or what? Help please...
I was at the Apple Store that week 5 times for a messed up phone that they replaced with a total of 4 replacement phones because of different issues the ones they gave me had and driving there that much almost made me say screw it to the iPhone...now I buy this very expensive iMac spending 2 grand and this happens....I'm so mad I am thinking of just returning it and giving up on Apple altogether which Idon't WANT to do...but with all I've dealt with in a 2 week period with the iPhone and now this...oh and I bought a $100 cell phone case I had to replace because it wasn't working correctly. So you see, I am beyond frustartee over Apple.....if anyone could help I'd greatly appreciate it. With all of my problems I've had, you'd think they want to do more than apologize for my inconvenience. Even the techs that helped me said it was ridiculous I've had so many issues and now I'm just adding to the list..Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now. -
TS4456 New Mac mini and older wireless keyboard connect, but don't pair
In setting up my brand new Mac mini, the wireless mouse paired with no problem, but I'm having trouble with the keyboard. I am using an older mouse and keyboard from my previous mini, which is completely shut down. The keyboard shows as being connected to the computer, but when I enter the code and press Return, the code disappears and nothing else happens. After a while the code reappears and I repeat the process with the same results. After several attempts, nothing else happens. I've tried rebooting twice, checked the keyboard batteries, made sure the keyboard light is blinking to show it's discoverable, but I can't move past this screen. I don't know what else to try. Please help!
Hi, it isn't paired to another device is it?
Might see this...
http://www.christopher-parsons.com/blog/technology/solved-bluetooth-devices-not- connecting-to-osx/ -
Database connection question...
i am using Java 1.5.0_06 and to connect to MySQL database i use Connector/J and the following code:
try {
Class.forName("com.mysql.jdbc.Driver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("Main: ClassNotFoundException: ");
System.err.println(e.getMessage());
return;
try {
con = DriverManager.getConnection(dburl);
ps = con.prepareStatement(
I was told i should be using a DataSource to do connection pooling and i have read over the info and downloaded jdbc2_0-stdext.jar and i am using MySQL and windows XP pro.
the code looks like this
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("jdbc/InventoryDB");
Connection con = ds.getConnection("myUserName", "myPassword");
then i just use con as i have already in my code.
Can someone please point me in the right direction to get this working.
I read this:
A systems administrator or someone working in that capacity deploys a DataSource object. Deployment, which involves setting the DataSource object's properties and then registering it with a JNDI naming service, is generally done with a tool. As part of the registration process, the systems administrator will associate the DataSource object with a logical name. This name can be almost anything, usually being a name that describes the data source and that is easy to remember. In the example that follows, the logical name for the data source is InventoryDB . By convention, logical names for DataSource objects are in the subcontext jdbc , so the full logical name in this example is jdbc/InventoryDB .
i have goggled but can't seem to find out exactly what i need to do next.
I can't find the "tool" and have to be honest i am lost lol.
can the The JDBC 2.0 Optional Package work with Java 1.5.0_06?i am using Java 1.5.0_06 and to connect to MySQL database i use Connector/J and the following code: i updated it to use manual connection pooling like so:
final String dburl = "jdbc:mysql://localhost/......";
Connection con = null;
try {
Class.forName("com.mysql.jdbc.Driver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("Main: ClassNotFoundException: ");
System.err.println(e.getMessage());
return;
try {
DataSource dataSource = setupDataSource(dburl);
con = dataSource.getConnection();
con.close();
public static DataSource setupDataSource(String connectURI) {
ObjectPool connectionPool = new GenericObjectPool(null);
ConnectionFactory connectionFactory = new DriverManagerConnectionFactory(connectURI,null);
PoolableConnectionFactory poolableConnectionFactory = new PoolableConnectionFactory(connectionFactory,connectionPool,null,null,false,true);
PoolingDataSource dataSource = new PoolingDataSource(connectionPool);
return dataSource;
so i compiled and ran it and it worked no problem but my question is that this is a server that does some db work upon starting and then waits for clients like so:
while (listening)
new PSMultiServerThread(serverSocket.accept()).start();
so once i am in PSMultiServerThread what exactly do i need to do?
i know i don't need to do this again:
Class.forName("com.mysql.jdbc.Driver");
but do i need to do this again:
DataSource dataSource = setupDataSource(dburl);
i geuss i have to to declare the variable lol.
and do i include this code in the PSMultiServerThread
public static DataSource setupDataSource(String connectURI) {
ObjectPool connectionPool = new GenericObjectPool(null);
ConnectionFactory connectionFactory = new DriverManagerConnectionFactory(connectURI,null);
PoolableConnectionFactory poolableConnectionFactory = new PoolableConnectionFactory(connectionFactory,connectionPool,null,null,false,true);
PoolingDataSource dataSource = new PoolingDataSource(connectionPool);
return dataSource;
-------------------------------------------------------------------------------------- -
Multiple DB connection question.
I have a MDB that currently processes a message and updates a Oracle DB say Database A. Now we want that MDB to check some flags on a different Oracle database instance, say Database B before it updates the Database A.
Basically, the during the processing of a message the MDB has to access Database A, Database B and Database A again in that order. My question is whatever I am trying to do is reccommended? Since I need connection to Database A again after I do some woek with Database B, can I still keep that connection around or do I have to close that right away?
I am using wls 8.1.
Any suggestions?
Thanks
JB<p>The short answer is that you can keep both connections around at the same time, without any issues. Just be careful with any cleanup where you close connections, and make sure that both get dealt with regardless of any exceptions that might occur.</p>
<p>But depending on the number of MDBs in your configured pool, it might be a more efficient use of database connections to create a smaller pool of stateless session beans to hold those database connections and expose utility methods for the queries (which could use prepared statements)</p>
Kevin Powe<br>
Senior Consultant
Message was edited by:
kevinpowe -
Key Stuck - *EVEN WHEN NO KEYBOARD CONNECTED*
Hello
The up cursor on the keyboard is stuck on.
But it stays stuck even when no keyboard is connected at all.
i.e. if you use the mouse to open a menu, the options will highlight from the bottom up.
If you type a document the cursor will keep flying back to the top.
It's impossible to enter any passwords as the invisible keystrokes of the up cursor seem to make it invalid.
It's exactly if something was resting on the keyboard.
I"ve tried different keyboards, including a BlueTooth one, so that rules out the connections.
And As I say it persists even when the keyboard and mouse are entirely disconnected.
It is still on when I startup from a bootable CD.
It feels as if some sort of hardware problem has occurred...
I've tried resetting the PRAM but as the keyboard doesn't function correctly, I can't use the startup shortcut.
I've unplugged mains power and removed the battery and pressed the PMU reset button, but to no avail.
I've started up from an OSX Leopard disk, but the problem persists.
This is driving me crazy, any ideas?yes, I've tried with 2 different mice, and with no mouse connected.
Even restarted from an install CD with no keyboard or mouse connected at all, cursor is still jumping upwards, and the repeating chime that you get when the keyboard buffer is full (like when you acidentally rest something on a key) is constantly sounding.
It feels to me as if there is some false signal getting to the keyboard buffer that the computer is interpreting as a constant up arrow key press.
Any ideas? Is there a part of the internals of the computer that I should check hasn't come loose in some way, triggering this false key input?
The problem happened after I moved the computer from one part of the office to another. -
Windows 8.1 and Apple Bluetooth Mouse and Keyboard connection
I recently upgraded to Windows 8.1 from Windows 8.0 Home and as a result I'm experiencing the following problems:
Apple Bluetooth Mouse - randomly dis/connects or freezes where I cannot move the mouse or it's very jerky or very slow.
Apple Bluetooth Keyboard - the keys will stick or freeze causing the redundent key presses (eg. yyyyyyyyeeeeeee).
I've done the following to fix the problem with no success:
Reinstall Boot Camp 5.0.5033 drivers
Reinstalled Bluetooth drivers from Boot Camp 5.0.533 individually
Unistalled both devices on OS X and reinstall them only on Windows 8.1
Reinstalling both on OS X and reinstalling them on Windows 8.1
Uninstalling all the drivers from the Device Manager and reinstalling them
One thing I have noticed is that under Devices and Printers I have two new devices (HID-compliant mouse and HID Keyboard Device) that were not there under Windows 8.0 in addition to my bluetooth devices. I have tried removing the new devices but they keep reinstalling themselves.
I have USB mouse that's connected and I've been able to use that without problems so I think there's a problem with the Apple driver or the Windows 8.1 bluetooth drivers.
Has anyone fixed this?
Thanks!Just to point out the "Bluetooth Collaboration" setting I've found this:
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.
And it is not enabled by default on some devices like on mine!
http://chasms.com/wireless_utilities/broadcom/props.htm#toc_51 -
Basic XI 3.0 to R/3 4.6c connectivity question
Greetings XI gurus,
I'm trying to setup & use a connection to an R/3 4.6c server from XI 3.0 to be used to call over & run one or more RFC's. I've created regular R/3 SM59 settings in both for a connection between the 4.6c server and the XI box.
However, in the system landscape, when I try to create a technical system, I have trouble on the last screen where you select the product. I try to use "SAP R/3 4.6c" and it says that there are no components found for that product.
1) Does anyone know what component it is looking for?
2) How do I import that component?
Thanks,
Doug -Jin & Michael,
Thank you for your prompt replies.
Yes I can see the "SAP R/3 4.6C" product.
I'll have to get authorization for the RZ70.
One of the members of our BASIS team has contacted a seemingly experienced old collegue who claims to know how to do this.
So... for now anyway... I'll close this question
Thank you both for your help.
Doug - -
1.5 mile AP to WGB connection questions
Hello all. I am new to the forum and have just enough networking skills to be dangerous. A+ and Net+ Certs in 2000. Self taught on my AP's and I am now finally to the point that I need help. Bare with me.
I have 2 Cisco 1200 G AP's connecting 2 different locations. Location A ( La ) I have a RVO82 router connected to a 50Mbit cable connection. I have an AP setup there using a 1 Watt booster and a 24db wire grid directional antenna. Only one antenna here, the other disabled.
At Location B (Lb ), about 1.5 miles away, with good to excellent line of site, i have the other setup as a WGB with a 15db wire grid directional antenna with a 1 Watt booster. Also only one antenna here, the other disabled.
WGB feeds a simple 8 port switch and in that switch i have a simple belkin wireless router setup as an AP for Lb's wireless access, which is the most used segment. (i will usually take all the freebies i can get, lol)
The signal strenght between the two locations is -49 to -52 db, depending on what time of day I check it.
I have had this setup for a couple of years now. I recently switched from a 3Mbit DSL connection to the 50Mbit cable connection hoping to increase my bandwidth with no luck.
When I first set this up i had a 6Mbit cable connection and it maxxed out at 5 Mbit at Lb. I thought i would be able to add more boosters and antennas as time went on to go from half duplex to full duplex (the way i think of it is one antenna receiving and the other sending, at both locations) so that when our ISP had faster rates available, i could upgrade. I recently read somewhere on the net that it is not possible to run full duplex in the AP to WGB setup i have. Is that true?
My main concern is increasing bandwidth on the WGB side Lb. When i upgraded to 50Mbit, i still only max out at 5mbit at Lb. Before i thought it was due to not being full duplex or weaker signal strengths (I've always had the 1watt booster at Lb, then i added one later to La with no benefit noticed except signal strength is better and uploads seem faster from Lb....) I always use speedtest.net to test the speeds. Pings from Lb to speedtest is 37ms. Websites are pretty fast and i have been very happy at Lb. I wanted to ask everyone here if its possible with what i have to increase bandwidth or not, or ask for other options to achieve it. Like i said, i am happy with 5Mbit. But i am paying for 50 and want to see how far that rabbit hole will go. Any ideas?
And i have more questions as well, leading into multiple routers and subnets spurring from Lb with their own AP's, but that is more for play and my own curiosity... 12 years later i have a great job and finally have some play money to use a tad of that Net+ but i've forgotten most of it.
....but thats it for now as i will wait to see if everyone calls me retarded or not before posting again. Thanks in advance ALL.One of these days i will learn how to do that cool quote box thingy...
leolaohoo wrote:I have an AP setup there using a 1 Watt booster and a 24db wire grid directional antenna.Oh my gosh. I have seen something like this. You say you have an amplifier/booster? How is this connected to your WAP? How LONG is the antenna cable (total) from your WAP to your booster and your booster to the antenna? I have an 8 inch pigtail connected between the AP and Booster. It converts TNC from AP side to Type N on booster side. Then a 50 coax cable running from booster to antennaWhen i upgraded to 50Mbit, i still only max out at 5mbit at Lb.Sorry, I don't want to sound so brash, but how did you measure this? Did you by any chance measure this from WAP to WAP of from LAN-A to LAN-B?I simply tested the speed at Location A and at location B separately with speedtest.net, with the same laptop, testing to the same server on speedtest. Cable Modem > RVO42 Router > Laptop for test at location A Cable Modem > RVO42 Router > 1200 AP > Antennas and all that invisible stuff > 1200 WGB > SG100D-08 Switch > Laptop for test at location B
Maybe you are looking for
-
Canon iR C5185i and Lion - Dept ID Management
I've been doing a lot of digging around and I can't find too much relating to Lion, but if this question has been answered for the most recent version of OSX then I would greatly appreciate a link. Most of the answers I find are for Snow Leopard and
-
Error Deploying BPEL process in Oracle SOA 10g
Hi All, Error Deploying the jar file in Oracle SOA 10g. Error no : 500 The server encountered an internal error or misconfiguration and was unable to complete your request. Following Information from log [New log entry] The BPEL process "InInvoi
-
Flex Mobile Application with online database
Hi, I would like to create a Flex Mobile Application but this one have to be read/connect to a online database ? I don't found any tuto or infos about that... Could you please tell me if it's possible and if yes, how to do that Thanks in advance !
-
How do you find the actual SRBS score for an IP? I know you can get a good/neutral/bad from the SB website but that doesn't help when trying to setup your sender groups. Thanks! -S
-
I am trying to connect both my ipod touch 5h gen and also my iphone 5c to my bluetooth headphones at the same time. I have been told because of the way the operating system works this is not possible. I used to be able to do this on my old non apple