Keyboard data input, full typing interruption, intermittent

I am hoping this post gets noticed, cant think of what else to do other than try different keywords to find users with same problem.
I get sticking/delayed response on keyboard.
When typing normally the typing stops, and does not suddenly write again like when typing too fast for the computer from the old days - it is like the data stream from the keyboard to the system is fully interrupted.
So I am typing, then nothing, then it starts again but I lose the words inbetween the stoppage.
I have zapped pram, repaired permissions, what else can I do? all keys work fine so no apparent hardware fault, or could it be a bad connector?
The fact that it seems random or related to some kind of processor interruption is as close as I can get to a diagnosis - are there any software tests or techniques to help sort this out? Driving me nuts.
Macbook already been back to apple for new MLB and battery - this problem started after I got the thing back.
cheers

Turn in your MBP to your nearest Apple store or call Apple care over the phone and submit the laptop for repairs. Apple changed my mother board to fix this problem. It seems that many owners of first revision MBPs have this problem. You are lucky that the issue is intermittenly because some of us have suffered through perpetual unresponsive keyboards.
The problem has something to do with the heat caused by the new poweradapter, mother board, and processor design.
I just got my MBP from Apple and so far the problem has disappear.

Similar Messages

  • Help, where is "Ignore accidental input when typing" checkbox on the PC?

    Hi all,
    I'm new to Macs and just got myself a new MBP Corei7. It's running Windows 7 great, however I find the track pad just too sensitive when I type on the keyboard, I keep inadvertently touching the track pad with my palm or thumb as I type causing the cursor to jump.
    Under the Bootcamp help, there's an entry:
    "Change the following under “Palm Rejection”:
    Ignore accidental input when typing: Select to make the computer ignore the trackpad while you type."
    But my Trackpad tab in the Bootcamp settings within Windows 7 doesn't have this option/check box. I made sure that I did have the latest BootCamp 3.1 drivers. But I can't find it anywhere. It says on a support thread here on the Mac side that that option has been removed on the Mac side of the Track Pad settings and enable by default (on late 2009 MBP)- can anyone confirm that for the PC side of things, because I've already done 4 typos on this message due to accidentally touching the pad while typing!
    Thanks,

    Upon further examination, I don't believe it's accidental trackpad touching that is the culprit here. I am typing in such a way that I am very VERY mindful of not touching the trackpad and occasionally I still get the "cursor jump" to another portion of the screen (even though I am aware that I have no part of my hand in contact with the trackpad. I fact I believe that "ignore accidental input when typing" is enabled by default across both PC and Mac trackpad drivers, I can rest my palms and upper thumbs on the track pad and it still has no effect on my typing. I think this cursor jumping might be something else. If I un-check all the trackpad options in the BootCamp track pad tab (ie; tapping...) then the problem goes away - which leads me to believe maybe the tapping is sensing some part of my hand (even though its not touch) that the poximity of some part of my hand is triggering a click to some portion of my screen.

  • How do i get rid of the confirmation popup that says This web page is being redirected to a new location. Would you like to resend the form data you have typed

    when navigating on certain sites (fiverr.com is one), i get the popup confirmation "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?"
    this is highly annoying and i can't find a way to turn this annoyance off. help!

    because of its impact on security this error message cannot be suppressed. you might want to contact the admins of the website where this is occuring and ask them to implement a handling of user input without sending it to a different server...

  • 2009 rollup not showing any data for full year

    Hi forum,
    I have a structure for time which rollsup months to quarters to year in BPC. For my 2008 hierarchy I can see data in full year but for my 2009 hierarchy I can see no data coming through for full year (although I do have data in the individual months and I can see this information in BPC. Any ideas as to what could be happening ?
    Thanks,
    Brian

    Thanks for your reply Sorin.
    So for 2009 did you input correct to have 2009.Total father for 2009.Q1, Q2,Q3,Q4?
    2009.Q1, Q2 etc.. all rollup correctly and 2009.TOTAL is the father of these four members.
    What version of SAP BPC are you using?
    5.1 patch 8
    After you changed you dimension time did you process the dimension with full process? (if we are speaking about Microsoft version).
    Yes.
    We need more information because it is clear that ytou missed a step in your process.
    The 2009 hierarchy is setup identical to the 2008 hierarchy so I am confused why it should not work. Can you tell me what additional information will be helpful to diagnose the problem ?

  • I keep getting this pop up. This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? Can you please help me figure out how to get this to stop!

    This pop up has been occurring about once a minute when I am on certain sites.
    This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
    How do I get it to stop?

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History ->'' Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> Firefox will: select "Use custom settings for history" -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
    1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • Error in saving  large value with the data input query

    Hi,
       I  am  trying to save a large value in 0Quantity using the data input query into a realtime infocube
    e-g
    123456789.1234
    Error says too many digits.
    When i try to save 8 digits before the decimal point ,no error, if it is 9digits before decimal it's thro' error.
    Is there any limitation before the decimal.
    i know that 0Quantity can take 17 digits including the sign.
    Any suggestions.?
    regards,
    ram

    try budgetting in thousands in stead of units? (setting on query itself)
    D

  • My iMac keeps typing a minus sign. I switched my wireless keyboard for a plug in Windows keyboard, and it keeps typing this one character. I took the batteries out of the Mac keyboard, so that is not the problem. I am running Mac OS X 10.6.8.

    my iMac keeps typing a minus sign. I switched my wireless keyboard for a plug in Windows keyboard, and it keeps typing this one character. I took the batteries out of the Mac keyboard, so that is not the problem. I am running Mac OS X 10.6.8. In parallels, I don't have any problem, just on the Mac platform.

    tebasj wrote:
    Thanks for your observation. I realize they are different versions, but when I use the "Software Update" menu, this is as far as it would update. Is there some way to update the iMac beyond what "Software Update" does? I've tried it several times.
    Please Note.
    Upgrading OSX 10.6.8 (Snow Leopard) to 10.8.3 (Mountain Lion) is not an update. It is a paid upgrade. Just as with 10.7 (Lion) you must purchase it from the App Store with yor Apple ID and install it after backing up your current computer state for safety.
    Cheers
    Pete

  • Tree-control for data input?

    Hi,
    I need to program an input screen for values that have hierarchical dependencies (e.g. sums). I feel, the most adequate user-interface would be a tree control, because of the data dependencies and also because the users asked for a possibility to collapse/expand parts of the data during input.
    I had a look at CL_GUI_COLUMN_TREE, but I'm not sure, if it can be used for data input. Has anyone done something like this before or can anybody direct me to some additional sample coding? (the sample coding in the reuse library didn't do it...)
    Thanks for your help, greetings, Kathrin!

    Hello Kathrin,
    Since you say that the user's input is hierarchical in nature, it is nice to have a tree-control for input. But, the choice of using a custom-control-version of the tree is a cause for some concern. I cannot recollect any of the SAP screens where the input can be given through such a tree framework (please do let me know if you have come across one). The problem with such a tree would be in the areas of even-handling. Filling the tree with appropriate data at the right times would be another challenge.
    However, there's one alternative that I would like to direct your attention to. You must have observed another kind of tree, when you select an application component from the APPLICATION HIERARCHY, which is just like a list. Also, the <i>Transport Organizer (SE09)</i>, <i>Menu Painter (SE41)</i> etc., have this kind of a tree. You can use this if you (or rather your users) are very particular on having a tree display. For more information, you can see the Function Group <b>SEUT</b>, which has the required function modules to accomplish the same. The Function Group is well documented, and you might have to work a little on the function modules themselves.
    Please do let me know if this is a suitable option to meet your requirement. All the best,
    Regards,
    Anand Mandalika.

  • [Solved] CUPS: Unable to write print data: Input/output error

    I'm filling this for the benefit of those poor googlers that can reach here.
    Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
    The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
    I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
    I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
    State Idle
    but printers.conf had:
    State Stopped
    StateMessage Unable to write print data: Input/output error
    Reason paused
    Probably due to the ErrorPolicy being stop-printer.
    So seeing I followed the following steps:
    Stop cups
    Replace printers.conf with printers.conf.O (I could also had manually edited it)
    Start cups
    It then went working flawlessly.
    There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).

    I think that I had this same problem, and fixed it by reinstalling the printer.  Thank you for your post.

  • How to set todays date in message date input field in uix

    Hello everybody,
    Im using jdeveloper 9015+adf+uix
    I am having an input form and in that i want to set the date input field with the current date(default value).
    Does anybody of you know how I should do this.
    Any help is appreciated,
    Thanks in advance

    Hi,
    Did you figure out on how to default system date in a date input field??
    I have a similar requirement in OA framework. Please let me know if you have any ideas.
    Thanks,
    vinay.

  • How to display current system Date in the Date Input field ?

    Hi,
    I am having a Date Input field( binded to Data type). On load, i would like to display the current system date filled in that input field.
    How do i achieve this ?
    Reg/Venkat

    Hi Venkatesan,
    In your view in your init() method add the following code:
    wdContext.currentContextElement().setOrderDate(new Date(System.currentTimeMillis()));
    this is if your Date-attribute is in the root of the context.
    else you have to set the date in the node where the date-attribute is present with:
    IYOURNODEElement node = wdContext.createYOURNODEElement();
    node.setOrderDate(new Date(System.currentTimeMillis()));
    regards,
    Björn

  • ADF 11g  Date input

    I am using date input component in ADF 11g.
    This component let u select only date. but I want the user be able to select date and time as well.
    which date component should I drop on page ?
    thx
    p

    All you have to do to see it in action is give your ADF BC EO date field the type of Timestemp instead of Date, and possibly add a nice format mask under the UI hints like: yyyy-MM-dd HH:mm:ss
    But, I do not have Entity Object in my application. ADF page was generated as part of "right click BPEL Human Task ---- Auto generate ADF Task Form".
    How do I have time as well in this case ?
    thx
    p

  • Calling Stored Procedure with a DATE input parameter

    Hi. A question about Date input parameters when calling a stored procedure...
    I have a procedure that takes a DATE parameter as input. I would like that DATE value to include a Time element.
    My Application Module method takes an input parameter as java.util.Date (myParamDate) - which will preserve a time element(?).
    However when I create the CallableStatement, I'm trying to set the parameter using setDate like this (for param 5):
                st = getDBTransaction().createCallableStatement("begin cs_my_pck.request_values(?,?,?,?,?,?,?,?); end;", 0);           
                Connection myConn = st.getConnection();
                ArrayDescriptor myArrDesc  =  ArrayDescriptor.createDescriptor("CS_FIELD_TABT", myConn);
                Array sqlParamNameArray = new oracle.sql.ARRAY(myArrDesc, myConn, paramNames.toArray());
                Array sqlParamValueArray = new oracle.sql.ARRAY(myArrDesc, myConn, paramValues.toArray());
                Array sqlFilterNameArray = new oracle.sql.ARRAY(myArrDesc,myConn,filterNames.toArray());
                st.setString(1, repType);
                st.setObject(2, sqlParamNameArray);
                st.setObject(3,sqlParamValueArray);
                st.setObject(4,sqlFilterNameArray);
                java.sql.Date myRepDate = new java.sql.Date(myParamDate.getTime());
                st.setDate(5,myRepDate);
                System.out.println("Report Date = " + myRepDate.toString());
                st.setString(6,repUser);
                st.setString(7,repAttach);
                // set out param
                st.registerOutParameter(8, Types.NUMERIC);
                st.execute();I understand java.sql.Date does NOT include a Time element. But setDate() accepts only a java.sql.Date so my procedure parameter ends up with a zero time element.
    How do I call this procedure retaining the Time element?
    Thanks.

    It includes time element, if you want more precision go with timestamp.
    http://docs.oracle.com/javase/6/docs/api/java/sql/Date.html

  • How do I stop the box "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?

    I have cleared my cookies and cache and disabled some add ons, but when in Facebook and specifically for Farmville, I keep getting the pop up box, "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I have closed and opened the browser, too and it still keeps coming up.... Please help!!! Thanks.

    You can't avoid that if the website is coded that way and data needs to be send from one server to another server.

  • Why Excel insert cell block, hasn't input for data input?

    Hi
    I found a block for insert new row in excel, but there is no input for data input. how should I insert data by this block to excel file? can you help me?
    that block name: Excel insert cells
    in report generator toolkit
    Best Reagards

    behzad1 a écrit :
    I could work with  Excel insert cell block, but when I want add new data to an old row continuation, last row shift downward! while I want add data to old row. anyone can help me?
    Nobody will be able to identify the problem without seeing your code. Excel Insert Cells.vi is used to add cells to an existing spreadsheet, not to set the cell value. To do this is a more specific way than the Append Report Text.vi you can use Excel Easy Text.vi or Excel Insert Table.vi. With these vis you can specify the range where you want to insert something.
    For your other question (Two different data types) you can use the Excel Set Cell Format.vi to format a range as a date or something else. You will need to use the Excel format specifiers for this.
    Ben64

Maybe you are looking for