Keyboard does not work after logon. after build upgrading to build 10049
Hi,
I orginally posted the question on
communities they suggested I posted the question here. So here it is:
I installed technical preview on a windows 8.1 hyper-v. After upgrading to build 10049. I can do a logon on the system but after wards my keyboard doesnt't work anymore. I tried connecting to the vm with remote desktop aswell as with the hyperv
connect. But no still no keyboard.
Since your keyboard fails when using RDP - this is not a hypervisor issue.
Seems to be a device issue, or an RDP issue.
Also, you are asking about a Preview. So anything goes, and anything fails.
I am assuming you tried rebooting the VM.
And since 8.1 is your Hyper-V host, disable "Enhanced Session Mode" in the settings of the Hyper-V server. Why? Because this still uses RDP instead of a pseudo console.
Doing this will give you a clue if this is an RDP issue.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Similar Messages
-
My keyboard does not work after cleaning :-(
Hello, I have a MacBook Pro (bought in december 2009) an now the keyboard does not work after I cleaned it. This was on thursday and today it still does not work. Any ideas?
Chances are that you've shorted the terminals on the keyboard, and will need to be replaced… When the keyboard on unibody MacBook Pro's is replaced the whole 'top case' will be done, trackpad etc… Now generally it is highly unlikely that the Liquid submersion indicators will have been activated unless the cloth was saturated with water. Also unless you purchased the AppleCare protection plan your MacBook will be out of warranty and will require an out of warranty repair.
From knowledge out of warranty repair for a top case assembly it's £163 and a level 2 hardware repair is £28 -
TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.
My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.
after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood! -
Keyboard does not work after using Support Drivers
I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
I did a system restore to get it back to a usable state for the time being.
Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers
-
Alum BT keyboard does not work after wake up - but BT trackpad does!
Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
- I have tried power button banging on it for a long time and does not work
- open mbair and type password in and remove keyboard and repair and after several tried it will work
- then I can close mbair and use external keyboard
- painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issueHello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator. -
MS office report function does not work after building the appication
I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
I use office 2000 and Windows XPjmq wrote:
I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
What error message if any did you get? It could be a couple things:
1. Did you include the Report Toolkit's dynamic vis in the app's build process?
Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
=====================================================
Fading out. " ... J. Arthur Rank on gong." -
Wireless keyboard does not work after waking up from idle
After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?
After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?
-
Program does not work after build
Hi,
I have built a program today that builds fine (no errors or warnings) but it fails when running the exe. I am using drivers for a spectrum analyzer (Rohde & Schwarz FSG) and when one of these drivers is called, it returns an error. Other drivers are run before this particular vi. Anyone have any idea how to troubleshoot this? I'm going to try and build the vi on its own and see if it works. In the mean time, if anyone has any suggestions, please let me know.
UPDATE: I built the file on its own and it still does not work. Again, when I run it in developer mode, it works fine.
VISA Write in rsspecan_core_write.vi->rsspecan_core_attribute_write_int.vi:3->subrsspecan_core_attribute_express.vi:2->rsspecan Configure Averaging Type.vi:Instance:Instance 1 41Saved rsspecan Configure Averaging Type .vi:1->rsspecan Configure Averaging Type.vi
Thanks.I've decided to post the vi since it is free to download. If anyone has an FSG and wants to build this file and see if they can run it, please do so.
Attachments:
rsspecan Configure Averaging Type.vi 31 KB -
Most of the default Mac Apps does not work after Mavericks Upgrade
Hi, I did everything, but nothing has brought me out of this misery .
I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
Hoping to get some response soon from Apple support team to help me.Hi Arthur,
Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
And below is the report generated from EtreCheck. Hope it can help me find the solution.
Hardware Information:
iMac (20-inch, Early 2008)
iMac - model: iMac8,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 2400 - VRAM: 128 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
HP IO - Path: /Library/StartupItems/HP IO
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
MySQLCOM - Path: /Library/StartupItems/MySQLCOM
ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
VirtualBox - Path: /Library/StartupItems/VirtualBox
System Software:
OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
Disk Information:
WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Western Digital My Book 1110 999.5 GB
WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.logmein.driver.LogMeInSoundDriver (1.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[failed] com.google.GoogleML.plist
[loaded] com.google.keystone.daemon.plist
[not loaded] com.logmein.logmeinserver.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.wdc.WDDMservice.plist
[loaded] com.wdc.WDSmartWareServer.plist
[loaded] rapiback.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.logmein.logmeingui.plist
[not loaded] com.logmein.logmeinguiagent.plist
[not loaded] com.logmein.logmeinguiagentatlogin.plist
[loaded] syncmateStarter.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.facebook.videochat.[redacted].plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
AirPort Base Station Agent
EarthDesk Engine
LMILaunchAgentFixer
AdobeResourceSynchronizer
RealPlayer Downloader Agent
Windows Phone 7 Connector Agent
iAntiVirus
TextEdit
StatusMenu
HP Scheduler
WDQuickView
3rd Party Preference Panes:
Application Enhancer
DivX
EarthDesk
Fan Control
Flash Player
Flip4Mac WMV
Growl
MacFUSE
WDQuickView
Internet Plug-ins:
AdobeExManDetect.plugin
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
DirectorShockwave.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Picasa.plugin
Unity Web Player.plugin
WebEx.plugin
WebEx64.plugin
Bad Fonts:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
29% mds
2% WindowServer
1% mds_stores
1% LogMeInGUI
1% RealPlayer Downloader Agent
1% EtreCheck
1% FanControlDaemon
0% uTorrent
0% notifyd
0% networkd
Top Processes by Memory:
1.00 GB mds
106 MB mds_stores
78 MB Google Chrome
49 MB Finder
45 MB WindowServer
40 MB Google Chrome Helper
37 MB VLC
29 MB uTorrent
20 MB EtreCheck
16 MB DashboardClient
Virtual Memory Statistics:
43 MB Free RAM
989 MB Active RAM
934 MB Inactive RAM
447 MB Wired RAM
4.25 GB Page-ins
454 MB Page-outs -
Insert in Tabular form does not work after the upgrade to APEX 4.0
Hi all,
Thx in advance for looking into the issue.
We are running into following issue when we upgraded APEX 3.2 to APEX 4.02
1) The Tabular form insert does not work.
2) We are fatching the value of the Global variable APEX_APPLICATION.g_XXXX in a procedure and we get null for this value after submit for new row to be inserted.
The tabular form was working fine in APEX 3.2.
The Update and Delete works just fine.
Any help in this regard is highly appreciated.
Thx and regards,
MaheshHere is my workaround to get the ADDROW/SUBMIT working again if you have a legacy Tabular Form:
1 PAGE ATTRIBUTES
JAVASCRIPT
FUNCTION AND GLOBAL VARIABLE DECLARATION
var htmldb_delete_message='"DELETE_CONFIRM_MSG"';
2 DELETE BUTTON
ACTION WHEN BUTTON CLICKED
URL Target change to
javascript:apex.confirm(htmldb_delete_message,'MULTI_ROW_DELETE');
3 ADDROW BUTTON
ACTION WHEN BUTTON CLICKED
Action
redirect to URL
URL Target
javascript:addRow();
4 PROCESS
APPLYMRU (activitated by button ADDROW)
CONDITION
never or delete
5 PROCESS
ADDROWS
CONDITION
never or delete
6 CHANGE PAGE TEMPLATE to e.g. THEME 13 One Level Tabs.
7 IF YOU WANT ADD FUNCTIONALITY TO GOTO BOTTOM OF PAGE AFTER ADDROW
1. In the page footer put <a name="bottom_of_page"></a>
2. Amend the action when the "ADD" button is clicked to scroll down to the new region by doing the following:
- edit "ADD" button
- Go to "Action when button Clicked" section
- Amend "URL Target" from
javascript:addRow();
to
javascript:addRow();window.location='#bottom_of_page' ;
regards
PaulP -
Wrt610n wireless network does not work after firmeware upgrade
Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
StefanUpdate -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or? -
Share option for email does not work after Yosemite upgrade.
Hi,
Does anybody know why the share option, "Share via email" does not work anymore after Yosemite upgrade? I love this feature. It's just quick and easy.
Rod.On Yosemite, Pages '09 v4.3 no longer recognizes the Share > Send Via Email categories. You will have to export and manually drag/drop/attach documents to Mail. There is no fix.
-
RAID Utility does not work after Vista upgrade
Hi,
I have a Qosmio G30 with 2 HD 120GB each. After I upgraded to Windows Vista from Windows XP, the Toshiba RAID Utility does not work anymore. In WXp it worked OK, but in Vista there is no way I can mirror the HD. That is, the utility itself work, but the button that should say Mirror, or something like that is not shown. I have set the drives to RAID-1 in the BIOS, but no go.
Is there any way to get the software RAID to work again?Hi,
just a little question: While installing vista, did you installed the RAID-driver at installation time? Maybe this could be the reason why RAID cannot be activated properly.
Please give some feedback, if you installed the RAID drivers for Vista during the installation..
Cheers -
Iphoto slideshow does not work after SL upgrade
Hi, i have a 2 month old macbook pro 3.06Ghz and after i upgraded to SL i have several problems: Toast does not work, my pretty new HP 4480 Photosmart Printer works but the scanner function not (error message comes up no connection to scanner), etc. but the biggest problem right now is that iPhoto does not work anymore. i use it a lot and i have over 20000 photos on it. before with leopard it was working fine, but now after scrolling through a few photos iphoto get stucked for a few minutes before it runs again. the slideshow feature doesn't work. i read a few forums about this or similar problems but all the advise didn't help. i reinstalled the iphoto from the original computer disc and later from a life 9 disc as well. first the slideshow works once or twice with only a few pics, but later it turns the slideshow on but get stucked and the only way to get out of the frozen screen is by turning the computer off (holding OFF button down). i did also verify disc permission and disc repair = no help. what can i do?
after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood! -
Dvd player does not work after Leopard upgrade
I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger. Since the upgrade, my DVD player does not work. I have problems burning some cd's too. Is this a known issue? What is the fix?
I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it. -
Some Widget does not work after latest upgrade
Today is July 23rd, 2011. By recent latest upgrade, mainly for supporting Lion, where I am still using Snow Leopard 10.6.8, some widget does not work, including Battery Meter, Digital Clock Alarm, Victoria Digital Clock, etc.
By the way, my company use Chatter and I installed Chatter Desktop. Again, after recent upgrade, it no longer work anymore.
Do you experience the same problem?
For those who has upgraded to Lion, do you also find some widget does not work?I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.
Maybe you are looking for
-
Hi, The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / tr
-
Hi experts! I'm in SAP CRM 7.0 and have a question with segmentation. I need to create a segment with 2 attributes: first is the date of birth of a contact and the second is marketing attribute of the account organization - "VIP". In first case I use
-
How to make text links on one layer appear differently than on another layer?
I have text links in some layers that I want to appear as white bold font and text links in other layers that I want to appear as black or blue unbold. I think this might be with CSS but I can't figure it out.
-
Unable to open an unformatted csv in excel
Hi Team, I have the data in the below format and I am unable to get this data into excel for the reason that we have even fields with multiple values which have commas in them (like a server might have multiple NICs). I just wanted to know if there i
-
Why has my safari suddenly slowed down. I cannot even type anything without having to wait for a long time.