KEYBOARD DOESN'T WORK IN ALL JAVA APPS

I think there are a bug with Java,
but some keys of my French keyboard doesn't work with ALL Java APPS (Solaris Management console...), but work fine with all other apps.
When I use Xsun, there are no problem, all keys work, but with Xorg, some keys doesn't work. (Only in Java Apps).
I had got this bug with Sun Solaris 10 and Sun Solaris 11 (6/05 Express)
This is a very nasty bug, I have got a PS/2 keyboard.
Willits

Enable multilib repo in /etc/pacman.conf , pacman -Syy and pacman -S flashplugin
Last edited by Halcyon22 (2010-09-14 13:34:53)

Similar Messages

Problem with XP Pro sp1 install - keyboard doesn't work - MBP

After using bootcamp to repartition the HD and rebooting with an xp pro sp1 cd, the blue windows installer loads and runs fine up to where you need to press the enter button to install windows or F3 to exit. At this point, the keyboard doesn't work at all and I have to push the power button. I also can not load osx or the osx boot disc, but the xp disc still loads fine. Currently working on slipstreaming a w/ sp2 to see if this will fix the problem. Prior to bootcamp, I upgraded osx and my firmware. Anyone else encounter this?

You need to use SP2. There is a reason it's recommended by Apple. If you have a valid XP install disk you can easily slipstream it with SP2, which is perfectly legal and effective, and is a relatively painless process.
http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html
Nick

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit

Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone. What can I do to stop this from happening?

Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone. What can I do to stop this from happening?
I have tried deleting the account and it deletes all my contacts. I have verizon and even using back up assistant, it says the contacts are there but they aren't. The only way i can find a contact is if I start to type a name in and new text but once i sent the new text, the name disappears and it just shows the number. Siri nor the address book don't recognize any contacts at all.

I cant find any reciept in my email or in my husbands email. I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!

My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

HI ..
The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
Starrtup your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
Please read > OS X Recovery

Hello there. My appstore app doesn't work at all when i am trying to open it ,it closes again. Thanks! iMac, Mac OS X (10.9.4)

Hello there. My appstore app doesn't work at all when i am trying to open it ,it closes again. Thanks! iMac, Mac OS X (10.9.4)

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

TS1277 HI. I have followed all the appropriate steps above and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user

HI.
I am having trouble authorising my Mac Air to my Itunes account. I found a discussion explaining how to go go into 'Terminal', then adding a command. I have followed all those appropriate steps and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user. Can anybody offer any suggestions?? ta

Does the command that you're trying to enter in Terminal begin with the word 'sudo'?
If so, your keyboard is working fine. When you type your password after a sudo command, nothing is echoed to the screen for security reasons (not even the * that are normally registered in other user interfaces). However, the program is registering what you type.
Just type your password and press 'return' and the command will be executed (so long as you type it correctly; if you don't, you'll get an error message).

My home button doesn't work at all, what should I do to close my apps?

The home button on my iPod doesn't work at all, even wen I press on it really hard. Any suggestions on what I should do?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

TS1382 my ipod nano's (4th generation) keyboard doesn't work! but all other things do, SOMEONE CAN HELP ME PLEASE?

my nano 4gen 8gb has a problem, it's keyboard doesn't work!! I have to shake it because of that and my hand is tired of that u.u does someone know how to fix it??

Did you do a restart or a reset?
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
If that didn't help, you have to write to/wait for the developer to update the software.

My new iPhone 4 doesn't work at all

You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
Message was edited by: HighSierra

So what to do besides complain? Troubleshoot?
I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
My (temporary) workaround?
To spare the battery:
*Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
*turn off push and fetch, have mail get new messages manually
*turn off data roaming
To keep the signal somewhat stable (making it easier to complete calls and spare battery)
*Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
*grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
*pray the free bumper will a) come soon and b) help. I'm not optimistic.
To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
*use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
*keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
null

Italian keyboard doesn't work under the gui

I have an italian keyboard on a x86 Solaris 10 installation.
All the patch available using Sun Update applied but the keyboard doesn't work, it still works only as a USA keyboard.
Forcing it as a Italian layout at startup (pressing esc and using the boot utility) make the keyboard work in the consolle with the correct layout but under the gui, after the dtlogin startup, the key doesn't work correctly. Every key is "shifted" of one position, so inserting "root" result in "eiir"
Even applyng the 118966-08 patch as suggested doesn't work.
Obiouvsly I used the gnome panel to set the correct keyboard under gnome but with no result
Both the two type of italian keyboards don't work, the standard one and the 104 "ibm" italian layout.
All this keyboards work fine on the same PC with both WindowsXP and Linux Ubuntu.
Any suggestion to fix this ?

The solution was to reconfigure the X-Server: In a console-window I called kdmconfig and corrected the keyboard settings: it was a US-Keyboard. Nobody knows ... At installation time I configured a german keyboard.
A remaining problem is that my mouse and keyboard are connected via USB and they are frozzen after boot. First when I physicaly detach both and reconnect them they start working in an ordinary manner. I saw a forum entry which talked about BIOS-settings.

After 8.3 update my keyboard is not working at all?

After the update 8.3 I am no longer able to use my keyboard?

Hello Nurswanab,
Thanks for using Apple Support Communities.
I'm not sure if your onscreen keyboard is not working in all apps, or in a specific app, but to start troubleshooting please restart, and then reset your iPhone. If this does not resolve the issue, please let me know, and provide more information about the issue.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a good one,
Alex H.

I recently got a used macbook pro, and the backlight on the keyboard doesn't light up all the way, I was wondering how much it would cost to get it fixed..

MacBook pro keyboard doesn't light up all the way, I don't know why and I was wondering how much it could cost for repairs.

If there is Warranty or AppleCare it will be covered at Apple Store. If no coverage, Apple does not repair iPhone 4 Power/Lock Button, for $149 they will give you a perfect replacement iPhone 4 exactly like yours with a 90 day Warranty. For the time being or as a permanent solution you can use perfect Virtual Lock Button. Tap Settings App > General > Accessibility > Assistive Touch > ON > tap the new small white screen button > Device > Lock. You can even use this button to turn the iPhone OFF. To turn iPhone ON, connect to power, ie charger or USB port of computer.

The accelerometer doesn't work at all please need help

Well the problem is that the accelerometer doesn't work at all in my ipod touch 3G it's with the ios4.2.1 and it used to work normally but now just doesn't react to te moves please need help

Thanks for the Welcome. After using macs for such a long time. This is my absolute 1st problem.
Here's whats in the log:
5/15/08 10:52:19 PM Mail[133] Unknown class ASExtendedOutlineView in Interface Builder file.
5/15/08 10:52:19 PM Mail[133] Unknown class EditingTableColumn in Interface Builder file.
5/15/08 10:52:20 PM Mail[133] * -[NSTextFieldCell minimumWidth]: unrecognized selector sent to instance 0x8db670
5/15/08 10:52:20 PM Mail[133] * -[NSTextFieldCell minimumWidth]: unrecognized selector sent to instance 0x8db670
Stack Trace: (
2512178932,
2475804524,
2512208056,
2512201400,
2512202056,
53820,
53492,
51728,
49036,
2512235268,
2517195632,
2517160308,
2517158680,
35100,
34644,
32612,
29152,
18456,
2501752236,
2511731368,
2443453352,
2443452876,
2443452428,
2517377984,
2517376392,
2517350980,
2517156936,
993392
When I go to Window->Message Viewer from the menu bar....This is what i get and I can't even close it. I have to force quit mail app completely. I just installed AmunRaa2.0 (it's a theme to change the look for low light consumption. I didn't realize but I installed a a file called MailFix which is supposed to be the fix not the actual installer. I am including the file as well.
/Users/paulkola/Desktop/screen-capture.png
/Users/paulkola/Downloads/untitled folder/Installers/Mail Fix.zip

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

OK, some more info.
I have re-installed os/x and applied all of the updates.
I have tried to migrate my existing accounts and the problem consistently manifests as below:
1. In a new user account, I can log in and use the keyboard then logout
2. If I log in to the migrated user account, the non-numeric keys on the keyboard do not work. If I then log out, and try to log in to another account on the same machine, the non-numeric keys continue not to work.
This would seem to suggest that as the profiles being migrated are on a machine with the same version of up to date OS/X, the issue lies with either the Macbook Pro (other people have also had keyboard problems) or with the migration assistant not working properly given that the current profiles work fine on another mac.
Any more ideas anyone?

KEYBOARD DOESN'T WORK IN ALL JAVA APPS

Similar Messages

Maybe you are looking for