Keyboard doesnt work . two letters are typed at the same time

Hi everyone!
my keyboard is working very strange. 
When i press letter t , the w is pressed as well
The same happens with letter g ( s)
The same happens with letter b (x)
The interesting thing is that these letters are in different lines and they are all separated to to the one that is also pressed by 2 keys in the middle. It seems like it was forming a pattern or a circuit.
I took the keys out to clean them but they seem to be ok.
Help !!!!! what should i do?
Bety

One possible reason is the battery is swollen and pressing up on the keys.
(Does you Macbook have a battery you can remove easily, the kind with a slot on the bottom to release the battery? If it does, remove the battery and test the keys using the power adpater.)
But I suspect this is a newer model, because the battery is on the left side (looking down on the computer), as are the misbehaving keys.
Suggest you make an appointment and ask an Apple genius to take a look. Diagnostics are free. If in fact you need a new battery they will do it for you. You only pay for the battery.
http://www.apple.com/retail/geniusbar/

Similar Messages

  • When two Computers are online at the same time, constantly losing internet connection

    I recently added a WRT160N router to my PC for a wireless Laptop elswhere in the house as well as adding a new network adapter card to my PC. When both the Laptop and the PC are online at the same time I am constantly getting booted offline and having to reset the connection, but when just the PC is on there are no prbloems and everything seems to work fine.
    Any suggestions would be helpful, thanks in advance
    Andy

    In this case i think you need to change some settings on your Router. Follow the steps below.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Is there a way to work with two or more app at the same time on iPhone or iPad

    Is there a way to work with two or more app at the same time on iPhone or iPad?

    What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

  • If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

    If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

    Yes, if both devices is using the same apple id for imessage.

  • Is there any way to judge whether two streamings are casted by the same client?

    Hello,
    My app use two different streams to send video and audio from flash clients to the server.
    So another client need to judge whether two streamings are casted by the same client or not.
    Is there any way to do this?
    For example, if it is possible to get ip address from netStream instance, it will be a solution.
    Could anyone teach me this?
    Thanks in advance!

    From the FCP 7 User Manual. You can access your copy of the Manual through the HELP menu on the menu bar at the top of your main screen.
    x
    Subtract Composite Mode
    Subtract darkens all overlapping colors. Whites in the foreground image go black, while whites in the background image invert overlapping color values in the foreground image, creating a negative effect.
    Blacks in the foreground image become transparent, while blacks in the background image are preserved.
    Overlapping midrange color values are darkened based on the color of the background image. In areas where the background is lighter than the foreground, the background image is darkened. In areas where the background is darker than the foreground, the colors are inverted.
    The order of two clips affected by the Subtract composite mode is important.
    Difference Composite Mode
    The Difference composite mode is similar to the Subtract composite mode, except that areas of the image that would be severely darkened by the Subtract composite mode are colored differently.
    The order of two clips affected by the Difference composite mode does not matter.

  • Why wont my Tv Show Download? it only says "download error. tap to retry" and tapping doesnt work it just keeps on saying the same thing.

    Why wont my Tv Show Download? it only says "download error. tap to retry" and tapping doesnt work it just keeps on saying the same thing.

    It appears in the download section of my itunes.
    I downloaded a season of Iron Man Anime and all of the episodes except episode 1 was downloaded. I looked at the error and it says "error = -50" and when I try to resume downloading, it continues to tell me that there is a download error and it wont resume.
    It also says to check my network connection, but I'm connected. So....I'm not sure what to do...this kind of ticks me off.

  • Having two oracle clients installed at the same time

    Hi, I was wondering if there is a way to have two oracle clients installed at the same time on one computer, and if there is a way to be changing the default client between the two. I need to have installed the oracle client 10g and 8 versions on the same computer, because we have a problem with a legacy application that for some reason only works with version 8, and we need the 10g because our new applications requires 8.1 or later. We are still migrating to the new system but we developers need to have the two clients. Any help is appreciated. Thanks in advance.

    Is it possible, sure.
    Technically, clients before 8.1.5 were not multi-home compliant, so having Oracle 8 and Oracle 10g clients on the same machine is almost certainly not supported. On the other hand, I know that a number of developers at Oracle had combinations of Oracle 7 clients Oracle 8 clients, Oracle 8i clients, and Oracle 9i clients on their development machines at the same, so you shouldn't have too many major issues.
    Most "default client" issues come down to which ORACLE_HOME is first in the system's PATH. Ideally, you would leave the Oracle 8 ORACLE_HOME first in the path and explicitly reference the 10g ORACLE_HOME when configuring anything that relies on the 10g client.
    Justin

  • Can I connect my Mac to two separate wireless networks at the same time?

    Need some assistance with some advanced wireless networking please....
    Upstairs I have a D-link wireless router connected to the internet and wired to a couple of PCs. Downstairs I have a minimac linked to my hifi via an airport express. I have bought a D-Link DWL-G122 usb wifi dongle.
    So I want the mini mac to connect to the airport express on one wireless network (strong signal) and to be able to connect to the internet on another network (weak signal) via the usb wifi /router.
    But the airport software and the d-link driver seem to conflict and both try to take control of the two wireless devices.
    Is there any way round this to be able to run one mac with two wireless network devices at the same time?
    Thanks

    While those with more experience may be able to correct me, I'm pretty sure that you can only connect to one wireless network at a time with your Mac Mini, unless D-Link provides their own proprietary software that bypasses the computer's Airport settings.
    Using the AirPort hardware you can only connect to a single wireless network at any given time. However in this situation the 2 attempted connections are via USB and AirPort. Therefore this requires nothing special of the AirPort drivers or settings.
    It does require that the Mac OS and applications have the capability to use either network connection (USB or AirPort) depending on what data they are trying to get. In general I understand how it is theoretically possible but I have no idea if you can configure OS X to do it.
    ...I believe one of the options when setting up the Airport Extreme Base Station is that you can extend a wireless network already in place.
    True but the D-Link is not compatible with Apple's WDS therefore this is not possible in this situation.
    If you have a newer Airport Extreme Base Station with a USB port on it...
    FYI, every AirPort Extreme base station (AEBS) has a USB port.
    BTW, birky has indicated that he/she is using an AirPort Express (AX) not an AEBS.

  • Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

    Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

    You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

  • How do you keep two users logged in at the same time?

    How do I keep two users logged in at the same time to be able to access home sharing?

    Fast User Switching in Users & Groups or Accounts preferences in Login Options.

  • One computer, but two user-accounts active, at the same time, in 10.6?

    I'm contemplating this setup: A current generation MacPro (running SL), with two monitors. Can I have two separate user-accounts (the Admin account and one additional user-account) active and running simultaneously from the MacPro, but, of course, displayed separately to the monitor corresponding with that user-account?
    Thank you!

    you can have two accounts logged in at the same time via fast user switching but there is no way to display them at the same time on different monitors.

  • I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

    I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

    Hello, thanks for replying.
    Yes they just copy to the next page, the fields are the same. The document is an observation to school lessons so it needs to be consistent but with different data on.

  • Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi

    Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi. I have already restored.

    This entire thing is a hair over four months old, I don't think it should be acting up this much. Plus, this problem happens only once out of every 40 or 50 times I start this thing up. It's very infrequent, but it's there, and it just bothers me, I guess.
    That said, I would try reinstalling, but I wouldn't be able to tell if it'd worked unless the problem never cropped up again in a long, long time. Sadly I also don't have access to my OSX discs at the moment (I'm out of the country).

  • For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

  • Is it possible to work on 2 Blurb books at the same time in LR4?

    Is it possible to work on 2 Blurb books at the same time in LR4?

    Yes, sure you can.
    Just make sure that you create a collection of the images used for each book.
    Otherwise when you go back to a book you previously worked on the images won't be found.
    Also, as said earlier create a <saved book> - top right in the Book Module.

Maybe you are looking for