Keyboard error in Solaris 7

Hi,
I have a minor error on my Solaris 7 installation;
The keyboard (norwegian 104-keys) works more or less as it should, as I get the norwegian special characters, and what is displayed is correct compared to what is on the keys.
The problem is that I cannot write any of the characters; ~,^,�,`,� when I am logged in locally via dt.
In addition my mouse (2-button) has its right-button mapped over as a middle-button, which is bothersome when I am using rdesktop to connect to a windows termserver.
Any solutions?
Lars

I would go back through kdmconfig (as root) and make sure
you've configured for your mouse and keyboard correctly.

Similar Messages

  • Hetis 945 No Keyboard Error

    I am using a Hetis 945 (MS-6410) Barebone System as an Embedded Print Controller with a Touch Screen Monitor. I get a No Keyboard Error at boot up when no keyboarsd is connected. I can't find any keyborad settings within the Bios (Award Ver 6.00PG). How can I disable the keyboard? 

    Have a look in BIOS settings, under 'Standard CMOS settings', there is usually a 'Halt On...' option, which you should be able to change to 'No Errors'.

  • Ultra 20M2 Keyboard error

    Hi,
    I have been having problems with getting Bloomberg keyboards to work on our Ultra20M2 workstations. At boot, Post screen we are getting the Keyboard error "Press F1 to continue" etc and the keyboard is not responding. Standard Sun keyboard works fine. I have upgraded the bios to 1.45 and still the problem occurs
    Seems to be some sort of BIOS related error as is not OS dependant.
    Thanks
    Peter

    Yes, U20M2 machines are VERY picky about keyboards. I've been able to get other keyboards to work by unplugging/re-plugging them in at the error, then pressing F1. Very annoying to have to do that everytime the computer boots up, but that's all I've found that works...

  • Keyboard Error on 5192

    Hi,
    We have a problem with the serverboard E7320 Master Series (5192).
    We can not boot without keyboard.
    "Keyboard Error - Press F1 for continue - F2 for Setup"
    Its not possible, turn off this error.
    The new bios 1.26 (is a 1.23) don't fix that problem.
    Greetz
    Gunnar Grubits
    Schlund+Partner AG

    This is beyond the control of anyone in this forum. Contact MSI directly.
    How to contact MSI.

  • Black Screen Freeze on Startup, Unplug all USB's, Restart, then "Keyboard Error"?

    Hey all
    Whenever I restart my computer, or turn it off and on I have an issue. I always get a completely black screen and it will not move past that. 
    Once I unplug all the USB's and restart my computer again using the power button, I am able to get past it but am given a "Keyboard Error" message. 
    It says:
    Processor Type:
    Processor Speed:
    L1/L2/L3...
    Memory Size:
    Channel A:
    Channel B:
    Bios Revision/Date:
    Keyboard Error.
    Press esc key for startup menu
    Any ideas?

    Hello @msliwa,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your computer displays a completely black screen, and that it will not move past that. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Oracle 10G installation problem, and errors on SOLARIS 10 x86

    HI.
    I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
    When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
    When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
    Could anybody tell me how to solve these problems, please?
    Thank you :)

    Two options:
    1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
    2. Create database manually (without DBCA)

  • Keyboard problem on solaris express de installation

    Hello i m having problem to install solaris express developper edition on my pc, as when the installation start, it doesnt take anything i type from the keyboard.
    It s solaris express release 5.11 version snv_57.
    My keyboard is standard ps2 keyboard. I tried with two keyboards and i have the same problem.
    Someone knows how to solve this issue ? Is there anything to configure in bios ?
    thank you for any help

    Solved by using a usb keyboard...

  • Open/close keyboard error

    Hi, I was wondering if anybody had any experience with an error like this. I have a Labview made Application that is experiencing some conflicts after installation on a Windows 2000 machine. Bare in mind that it has been successfully installed on 2000 machines in the past. The problem is that when the application is run, the user receives a message that reads,"Select sub.vi to open keyboard". I don't believe this refers to a sub vi called "sub.vi" but a sub vi in general. Could there be a conflict with the keyboard drivers? I unfortunately am not a first hand witness, so this is all the info I have. Could a USB keyboard cause errors like this or something?
    Glen D

    Evan,
    Thank you for all your suggestions. The exact error messages our customer is receiving are 'Select sub.vi to open keyboard' and 'Select sub.vi to close keyboard'. These errors occur when the exe is tried to run. By no coincidence, two of the vi's in this exe are called "open keyboard.vi" and "close keyboard.vi". This sounds strange to me because I would think the error message would read something more like, " Vi not found. Select 'Open Keyboard.vi'" The actual message implies that LabView knows what the missing vi's do, unless it is some other kind of error.
    It also does not make sense to me that these two vi's would go missing on 1 out of who knows how many installations. Is there any possible explaination for that?
    Lastly, an
    d somewhat unrelated, at the heart of these vi's is a CIN. How do I review the code of the CIN?
    Thanks again
    Glen D

  • AWT error on Solaris, please help

    Hello all,
    I have designed a class to convert any picture format to WBMP using Jimi via a web browser.
    The user specifies the file to convert on his computer and presses a OK button. Then, the file is converted and saved to
    the server.
    When running it on a windows computer, everything is ok. But I try to run it on my solaris box, I got the following error :
    Error: 500
    java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
         at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
         at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:120)
         at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
         at sun.awt.motif.MToolkit.(MToolkit.java:57)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:120)
         at java.awt.Toolkit$2.run(Toolkit.java:512)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:503)
         at com.sun.jimi.core.Jimi.getImage(Jimi.java:334)
         at com.sun.jimi.core.Jimi.getImage(Jimi.java:323)
         at com.mcms.util.Convert2Wbmp.loadImage(Convert2Wbmp.java:62)
         at com.mcms.util.Convert2Wbmp.convert(Convert2Wbmp.java:110)
         at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:500)
         at org.apache.tomcat.core.Handler.service(Handler.java:223)
         at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:448)
         at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:911)
         at org.apache.tomcat.core.ContextManager.service(ContextManager.java:824)
         at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:152)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:438)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:505)
         at java.lang.Thread.run(Thread.java:484)
    Note that the 6000 port is open on my solaris server :
    6000/tcp open X11
    What should I do ?
    Here's the code, I hope we're allowed to post it ;) :
    ==================
    Convert2WBMP.java
    ==================
    import com.sun.jimi.core.Jimi;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.image.PixelGrabber;
    import java.io.*;
    import java.io.PrintStream;
    import java.util.EventObject;
    import java.util.StringTokenizer;
    * This handles an individual incoming request. It returns a bytes etc from remote server.
    * @version 1.0
    public class Convert2Wbmp extends Frame
    private static int width;
    private static int height;
    private static Image image;
    private static int buffer[];
    public Convert2Wbmp()
    private Image loadImage(String s, boolean flag)
    Image image1 = null;
    try
    if(flag)
    image1 = Jimi.getImage(s);
    else
    image1 = Toolkit.getDefaultToolkit().getImage(ClassLoader.getSystemResource(s));
    MediaTracker mediatracker = new MediaTracker(this);
         mediatracker.addImage(image1, 0);
         mediatracker.waitForID(0);
    catch(Exception _ex)
         _ex.printStackTrace();
    return null;
    if(image1.getWidth(null) == -1 || image1.getHeight(null) == -1){
    return null;
    else
    return image1;
    private static Image loadImage(InputStream s)
    //System.out.println("now loading Image...");
    Image image1 = null;
    try
         image1 = Jimi.getImage(s);
         MediaTracker mediatracker = new MediaTracker(new Convert2Wbmp());
         mediatracker.addImage(image1, 0);
         mediatracker.waitForID(0);
    catch(Exception _ex)
         _ex.printStackTrace();
    return null;
    if(image1.getWidth(null) == -1 || image1.getHeight(null) == -1)
    return null;
    else
    return image1;
    private static void makeWBMP()
    if(image != null)
    buffer = new int[width * height];
    try
    PixelGrabber pixelgrabber = new PixelGrabber(image.getScaledInstance(width, height, 1), 0, 0, width, height, buffer, 0, width);
    pixelgrabber.grabPixels();
    catch(Exception exception)
         exception.printStackTrace();
    public static void convert(InputStream picSource,OutputStream target) throws Exception
    if(picSource != null)
         Image image1 = null;
         try
         image1 = loadImage(picSource);
         }catch(Exception e){ }
         if(image1 == null)
         System.out.println("Failed to load image!");
         return;
         image = image1;
         width = image1.getWidth(null);
         height = image1.getHeight(null);
         makeWBMP();
         try
         WBMP.save(buffer, width, height, 30, target);
         }catch (Exception e)
         e.printStackTrace();
    public static void main(String[] arg)
    try
    String target = "target.wbmp";
    String source = "source.jpg";
    Convert2Wbmp.convert( new FileInputStream( new File(source)), new FileOutputStream(target) );
    System.out.println("convertion finish!!");
    catch(Exception err )
    err.printStackTrace();
    ============
    WBMP.java
    ============
    import java.awt.*;
    import java.awt.image.MemoryImageSource;
    import java.io.*;
    public abstract class WBMP
    public WBMP()
    public static Image errorDiff(int ai[], int i, int j, int k, Color color, boolean flag)
    //System.out.println(" [WBMP]-----errorDiff");
    double ad[] = new double[i * j];
    for(int l = 0; l < i * j; l++)
    ad[l] = greypixel(ai[l]);
    double d = 42D;
    for(int i1 = 0; i1 < j; i1++)
    for(int j1 = 0; j1 < i; j1++)
    double d1 = ad[i1 * i + j1];
    if(ad[i1 * i + j1] > (double)k)
    ad[i1 * i + j1] = 255D;
    else
    ad[i1 * i + j1] = 0.0D;
    double d2 = d1 - ad[i1 * i + j1];
    if(j1 < i - 1)
    ad[i1 * i + j1 + 1] = ad[i1 * i + j1 + 1] + (8D / d) * d2;
    if(j1 < i - 2)
    ad[i1 * i + j1 + 2] = ad[i1 * i + j1 + 2] + (4D / d) * d2;
    if(i1 < j - 1 && j1 > 1)
    ad[((i1 + 1) * i + j1) - 2] = ad[((i1 + 1) * i + j1) - 2] + (2D / d) * d2;
    if(i1 < j - 1 && j1 > 0)
    ad[((i1 + 1) * i + j1) - 1] = ad[((i1 + 1) * i + j1) - 1] + (4D / d) * d2;
    if(i1 < j - 1)
    ad[(i1 + 1) * i + j1] = ad[(i1 + 1) * i + j1] + (8D / d) * d2;
    if(i1 < j - 1 && j1 < i - 1)
    ad[(i1 + 1) * i + j1 + 1] = ad[(i1 + 1) * i + j1 + 1] + (4D / d) * d2;
    if(i1 < j - 1 && j1 < i - 2)
    ad[(i1 + 1) * i + j1 + 2] = ad[(i1 + 1) * i + j1 + 2] + (2D / d) * d2;
    if(i1 < j - 2 && j1 > 1)
    ad[((i1 + 2) * i + j1) - 2] = ad[((i1 + 2) * i + j1) - 2] + (1.0D / d) * d2;
    if(i1 < j - 2 && j1 > 0)
    ad[((i1 + 2) * i + j1) - 1] = ad[((i1 + 2) * i + j1) - 1] + (2D / d) * d2;
    if(i1 < j - 2)
    ad[(i1 + 2) * i + j1] = ad[(i1 + 2) * i + j1] + (4D / d) * d2;
    if(i1 < j - 2 && j1 < i - 1)
    ad[(i1 + 2) * i + j1 + 1] = ad[(i1 + 2) * i + j1 + 1] + (2D / d) * d2;
    if(i1 < j - 2 && j1 < i - 2)
    ad[(i1 + 2) * i + j1 + 2] = ad[(i1 + 2) * i + j1 + 2] + (1.0D / d) * d2;
    for(int k1 = 0; k1 < i * j; k1++)
    int l1 = (int)ad[k1];
    if(!flag)
    if("1".equals(handlesinglepixel(l1, k)))
    ai[k1] = color.getRGB();
    else
    ai[k1] = Color.black.getRGB();
    } else
    if("1".equals(handlesinglepixel(l1, k)))
    ai[k1] = Color.black.getRGB();
    else
    ai[k1] = color.getRGB();
    return (new Canvas()).createImage(new MemoryImageSource(i, j, ai, 0, i));
    public static Image errorDiff2(int ai[], int i, int j, int k, Color color, boolean flag)
    //System.out.println(" [WBMP]-----errorDiff");
    char c = '\377';
    byte byte0 = 2;
    double ad[] = new double[i * j];
    for(int l = 0; l < i * j; l++)
    ad[l] = greypixel(ai[l]);
    int i1 = ((c + 1) * 2) / byte0;
    int j1 = c / (byte0 - 1);
    int k1 = (9 * c) / 32;
    int ai1[] = new int;
    for(int k2 = 0; k2 < i; k2++)
    ai1[k2] = k1;
    for(int l2 = 0; l2 < j; l2++)
    int i3 = (7 * c) / 32;
    int k3 = c / 32;
    for(int i4 = 0; i4 < i; i4++)
    int i2 = (int)ad[l2 * i + i4];
    i2 += i3 + ai1[i4];
    int l1 = (i2 / i1) * j1;
    if(l1 > c)
    l1 = c;
    ad[l2 * i + i4] = l1;
    i2 -= l1;
    int j2 = i2 >> 4;
    i3 = 7 * j2;
    ai1[i4] = 5 * j2 + k3;
    if(i4 > 0)
    ai1[i4 - 1] += 3 * j2;
    k3 = i2 - 15 * j2;
    for(int j3 = 0; j3 < i * j; j3++)
    int l3 = (int)ad[j3];
    if(!flag)
    if("1".equals(handlesinglepixel(l3, 30)))
    ai[j3] = color.getRGB();
    else
    ai[j3] = Color.black.getRGB();
    } else
    if("1".equals(handlesinglepixel(l3, 30)))
    ai[j3] = Color.black.getRGB();
    else
    ai[j3] = color.getRGB();
    return (new Canvas()).createImage(new MemoryImageSource(i, j, ai, 0, i));
    private static int greypixel(int i)
    int j = i >> 24 & 0xff;
    int k = i >> 16 & 0xff;
    int l = i >> 8 & 0xff;
    int i1 = i & 0xff;
    return (k + l + i1) / 3;
    public static String handlesinglepixel(int i, int j)
    //      System.out.println(" [WBMP]-----handlesinglepixel");
    int k = i >> 24 & 0xff;
    int l = i >> 16 & 0xff;
    int i1 = i >> 8 & 0xff;
    int j1 = i & 0xff;
    if((l + i1 + j1) / 3 > j)
    return "1";
    else
    return "0";
    public static Image open(String s)
    throws FileNotFoundException
         //System.out.println(" [WBMP]-----open");
    Image image = null;
    FileInputStream fileinputstream = new FileInputStream(s);
    try
    fileinputstream.read();
    fileinputstream.read();
    int i = readMultiByteInteger(fileinputstream);
    int j = readMultiByteInteger(fileinputstream);
    int ai[] = new int[i * j];
    int k = 0;
    for(int l = 0; l < j; l++)
    for(int i1 = 0; i1 < i / 8; i1++)
    int j1 = fileinputstream.read();
    String s1 = Integer.toBinaryString(j1);
    for(int l1 = 0; l1 < 8 - s1.length(); l1++)
    ai[k++] = Color.black.getRGB();
    for(int i2 = 0; i2 < s1.length(); i2++)
    if(s1.charAt(i2) == '0')
    ai[k++] = Color.black.getRGB();
    else
    ai[k++] = Color.white.getRGB();
    if(i % 8 > 0)
    int k1 = fileinputstream.read();
    String s2 = Integer.toBinaryString(k1);
    String s3 = "";
    for(int j2 = 0; j2 < 8 - s2.length(); j2++)
    s3 = s3 + '0';
    s2 = s3 + s2;
    for(int k2 = 0; k2 < i % 8; k2++)
    if(s2.charAt(k2) == '0')
    ai[k++] = Color.black.getRGB();
    else
    ai[k++] = Color.white.getRGB();
    fileinputstream.close();
    image = (new Canvas()).createImage(new MemoryImageSource(i, j, ai, 0, i));
    catch(Exception _ex)
         _ex.printStackTrace();
    try
    fileinputstream.close();
    catch(Exception _ex2) {_ex2.printStackTrace(); }
    return null;
    return image;
    public static int readMultiByteInteger(InputStream inputstream)
    throws IOException
    //System.out.println(" [WBMP]-----readMultiByteInteger");
    StringBuffer stringbuffer = new StringBuffer("");
    StringBuffer stringbuffer1;
    do
    stringbuffer1 = new StringBuffer(Integer.toBinaryString(inputstream.read()));
    int i = 8 - stringbuffer1.length();
    for(int j = 0; j < i; j++)
    stringbuffer1.insert(0, '0');
    stringbuffer.append(stringbuffer1.substring(1));
    } while(stringbuffer1.charAt(0) != '0');
    return Integer.parseInt(stringbuffer.toString(), 2);
    public static boolean save(int ai[], int i, int j, int k, OutputStream outputstream)
         //System.out.println(" [WBMP]-----save");
    try
    outputstream.write(0);
    outputstream.write(0);
    writeMultiByteInteger(outputstream, i);
    writeMultiByteInteger(outputstream, j);
    String s = "";
    for(int l = 0; l < j; l++)
    for(int i1 = 0; i1 < i; i1++)
    s = s + handlesinglepixel(ai[l * i + i1], k);
    if(s.length() == 8)
    outputstream.write(Integer.parseInt(s, 2));
    s = "";
    if(s.length() > 0)
    int j1 = 8 - s.length();
    for(int k1 = 0; k1 < j1; k1++)
    s = s + "0";
    outputstream.write(Integer.parseInt(s, 2));
    s = "";
    catch(NumberFormatException _ex)
    return false;
    catch(IOException _ex)
    return false;
    return true;
    public static Image threshold(int ai[], int i, int j, int k, Color color, boolean flag)
    int ai1[] = new int[i * j];
    int l = 0;
    for(int i1 = 0; i1 < j; i1++)
    for(int j1 = 0; j1 < i; j1++)
    if(!flag)
    if("1".equals(handlesinglepixel(ai[l], k)))
    ai1[l++] = color.getRGB();
    else
    ai1[l++] = Color.black.getRGB();
    } else
    if("1".equals(handlesinglepixel(ai[l], k)))
    ai1[l++] = Color.black.getRGB();
    else
    ai1[l++] = color.getRGB();
    ai = ai1;
    return (new Canvas()).createImage(new MemoryImageSource(i, j, ai1, 0, i));
    public static void writeMultiByteInteger(OutputStream outputstream, int i)
    throws IOException
    String s = Integer.toBinaryString(i);
    int j = s.length();
    int k = j / 7;
    if(j % 7 != 0)
    k++;
    int ai[] = new int[k];
    int l = j;
    for(int i1 = k - 1; i1 >= 0; i1--)
    StringBuffer stringbuffer = new StringBuffer("");
    for(int k1 = 0; k1 < 7; k1++)
    if(--l < 0)
    stringbuffer.insert(0, '0');
    else
    stringbuffer.insert(0, s.charAt(l));
    if(i1 == k - 1)
    stringbuffer.insert(0, '0');
    else
    stringbuffer.insert(0, '1');
    ai[i1] = Integer.parseInt(stringbuffer.toString(), 2);
    for(int j1 = 0; j1 < ai.length; j1++)
    outputstream.write(ai[j1]);

    Hi
    I am working on a project in which I have to perform a task some thing similar to bluemountain.com. the way, they give option to select a background image, then have to fill a form in which one type its message and then on preview, they can see an image having the text written on it.
    Now I am doing to do this thing using JIMI. So far, what I have done is, I was able to create a jpg file and write several text on different coordinates. But one thing I want to do is, I want to load an existing file and then write text on it. I have tried this code. public static void main(String[] ar)
    try
    Frame frame = new Frame();
    frame.addNotify();
    Image image = frame.createImage(100,30);
    Graphics graphic = image.getGraphics();
    graphic.setFont(new Font("Times New Roman",Font.BOLD,20));
    graphic.setColor(Color.black);
    graphic.drawString("Hi Buddy",10,20);
    graphic.drawString("Cool",50,25);
    Jimi.putImage("image/jpg",image,"try.jpg");
    frame.removeNotify();
    catch(Exception e)
    e.printStackTrace();
    This is the code which creates a new image whereas I want to load an existing image and then write text on it.
    I have already used this code in the upper code.
    Image image = Jimi.getImage("filename");
    But as response, I get the following error msg:
    java.lang.IllegalAccessError:
    getGraphics() only valid for images
    created with createImage(w, h)
    now this is the main problem when I am trying to do the stuff. I m kinda new into this stuff. I tried several things but no luck so far. I have seen that u have already worked on these kinda things so thought you might help me out to get the thing done. Please do reply me with some solution.
    Regards,
    Faisal

  • Error on solaris

    Can anyone help me with this
    Hi all,
    I was facing a strange error while trying to run build after the "make depend" and "make all" was sucessful in solaris 5.4.
    When I tried to attach dbx and run the build on solaris 5.4 release , it shows a wrong a memory address which is cascaded and dumps . Neither of the memory is freed.
    dbx: cannot access address 0xffffffffffffffd4
    When I tried to run with purify it shows:
    UMR: Uninitialized memory read:
    * This is occurring while in:
    _writev [libc.so.1]
    ts_tcp_writev [ts_tcp.c:401]
    ts_send [trans.c:512]
    check_pending_writes [perm.c:956]
    PermPoll [perm.c:2233]
    flush_perm [cfg.c:839]
    * Reading 2092 bytes from 0xff322fdc (misaligned) between the heap and the stack (2060 bytes at 0xff322ffc uninit).
    * Address 0xff322fdc is global variable "pack_buff".
    This is defined in perm.c.
    SBW: Stack array bounds write:
    * This is occurring while in:
    memcpy [rtlib.o]
    smcallback [mgmt_sm.c:2415]
    MakeCallback [perm.c:1814]
    client_read [perm_client.c:295]
    ts_poll [ts_poll.c:336]
    PermPoll [perm.c:2263]
    * Writing 2000 bytes to 0xffbed130.
    * Frame pointer 0xffbed530
    * Address 0xffbed130 is local variable "mymsg" in function smcallback.
    MSE: Memory segment error:
    * This is occurring while in:
    MakeCallback [perm.c:1826]
    * Accessing a memory range that crosses a memory segment boundary.
    Addressing 0xffffffdc for 4 bytes ending at 0xffffffe0,
    which is neither in the heap nor the main stack.
    COR: Fatal core dump:
    * This is occurring while in:
    MakeCallback [perm.c:1826]
    * Received signal 11 (SIGSEGV - Segmentation Fault)
    * Faulting address = 0xffffffdc
    * Signal mask: (SIGSEGV)
    * Pending signals:
    Purify: Searching for all memory leaks...
    Memory leaked: 0 bytes (0%); potentially leaked: 0 bytes (0%)
    Purify Heap Analysis (combining suppressed and unsuppressed blocks)
    Blocks Bytes
    Leaked 0 0
    Potentially Leaked 1 8200
    In-Use 282 970327
    Total Allocated 283 978527
    Can anybody please let me know :
    1.why this happens and why this error occurs.
    Accessing a memory range that crosses a memory segment boundary.
    Addressing 0xffffffdc for 4 bytes ending at 0xffffffe0,
    which is neither in the heap nor the main stack.
    2. Why this cascading of memory address is happening.
    null

    What compiler are you using?
    The Calendar SDK (9.0.4.2) is built and certified using Sun Workshop 5.0. It's possible (even likely) that using a compiler with a different major version number will cause problems due to the different runtime environments.
    Graham

  • 10g installation error on Solaris 10 X86

    Dear All,
    i have downloded a 10g( solaris x86) from oracle site to install Solaris 10 x86..
    After following installation document steps when i execute command ./runinsta follwing error occurs.
    **********************************output**************************
    $ ./runinsta
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 1555 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 1715 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-31_08-38-33PM. Please wait ...unzip: cannot find ../stage/Components/oracle.swd.jre/1.4.2.0.0/1/DataFiles/*.jar, ../stage/Components/oracle.swd.jre/1.4.2.0.0/1/DataFiles/*.jar.zip or ../stage/Components/oracle.swd.jre/1.4.2.0.0/1/DataFiles/*.jar.ZIP.
    Error in writing to directory /tmp/OraInstall2010-03-31_08-38-33PM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
    : Error 0
    $
    but there is sufficient space for /tmp.
    Please suggest how to resolve issue.
    Thanks.
    Rajesh.
    Edited by: user12071799 on Apr 2, 2010 6:15 AM

    Hi,
    $ ls
    actions oracle13.bak oracle26.bak oracle39.bak oracle_6.bak oracle_s.18 oracle_s.pro
    componen oracle14.bak oracle27.bak oracle40.bak oracle_7.bak oracle_s.19 oracle_s.xml
    config.xml oracle15.bak oracle28.bak oracle41.bak oracle_8.bak oracle_s.2 ouiconfi.xml
    dialogs oracle16.bak oracle29.bak oracle42.bak oracle_9.bak oracle_s.20 prereq
    fastcopy oracle17.bak oracle30.bak oracle43.bak oracle_s.1 oracle_s.21 products.xml
    fastcopy.xml oracle18.bak oracle31.bak oracle44.bak oracle_s.10 oracle_s.3 properti
    install1.jar oracle19.bak oracle32.bak oracle45.bak oracle_s.11 oracle_s.4 queries
    install2.jar oracle20.bak oracle33.bak oracle46.bak oracle_s.12 oracle_s.5 shiphome.pro
    invdetai.pro oracle21.bak oracle34.bak oracle_2.bak oracle_s.13 oracle_s.6 shiphome.xml
    libs.xml oracle22.bak oracle35.bak oracle_2.pro oracle_s.14 oracle_s.7
    oracle10.bak oracle23.bak oracle36.bak oracle_3.bak oracle_s.15 oracle_s.8
    oracle11.bak oracle24.bak oracle37.bak oracle_4.bak oracle_s.16 oracle_s.9
    oracle12.bak oracle25.bak oracle38.bak oracle_5.bak oracle_s.17 oracle_s.bak
    $ pwd
    /database/stage
    $
    there is no directory with name Components.But on directory is present with name componen.
    pwd
    /database/stage
    # ls -l
    total 9332
    dr-xr-xr-x 23 oracle oinstall 512 Apr 1 22:08 actions
    dr-xr-xr-x 116 oracle oinstall 2560 Apr 1 22:12 componen
    -r-xr-xr-x 1 oracle oinstall 3344 Apr 1 22:12 config.xml
    dr-xr-xr-x 7 oracle oinstall 512 Apr 1 22:13 dialogs
    dr-xr-xr-x 2 oracle oinstall 512 Apr 1 22:13 fastcopy
    -r-xr-xr-x 1 oracle oinstall 1581 Apr 1 22:13 fastcopy.xml
    -r-xr-xr-x 1 oracle oinstall 3097662 Apr 1 22:13 install1.jar
    -r-xr-xr-x 1 oracle oinstall 595911 Apr 1 22:13 install2.jar
    -r-xr-xr-x 1 oracle oinstall 198 Apr 1 22:13 invdetai.pro
    -r-xr-xr-x 1 oracle oinstall 15430 Apr 1 22:13 libs.xml
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle10.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle11.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle12.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle13.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle14.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle15.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle16.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle17.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle18.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle19.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle20.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle21.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle22.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle23.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle24.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle25.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle26.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle27.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle28.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle29.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle30.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle31.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle32.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle33.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle34.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle35.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle36.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle37.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle38.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle39.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle40.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle41.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle42.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle43.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle44.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle45.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle46.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle_2.bak
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_2.pro
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle_3.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle_4.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle_5.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle_6.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle_7.bak
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle_8.bak
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle_9.bak
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.1
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.10
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.11
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.12
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.13
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.14
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.15
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.16
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.17
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.18
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.19
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.2
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.20
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.21
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.3
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.4
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.5
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.6
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.7
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.8
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.9
    -r-xr-xr-x 1 oracle oinstall 580 Apr 1 22:13 oracle_s.bak
    -r-xr-xr-x 1 oracle oinstall 656 Apr 1 22:13 oracle_s.pro
    -r-xr-xr-x 1 oracle oinstall 4869 Apr 1 22:13 oracle_s.xml
    -r-xr-xr-x 1 oracle oinstall 5237 Apr 1 22:13 ouiconfi.xml
    dr-xr-xr-x 5 oracle oinstall 512 Apr 1 22:13 prereq
    -r-xr-xr-x 1 oracle oinstall 801088 Apr 1 22:13 products.xml
    dr-xr-xr-x 2 oracle oinstall 512 Apr 1 22:13 properti
    dr-xr-xr-x 43 oracle oinstall 1024 Apr 1 22:13 queries
    -r-xr-xr-x 1 oracle oinstall 67 Apr 1 22:13 shiphome.pro
    -r-xr-xr-x 1 oracle oinstall 237 Apr 1 22:13 shiphome.xml
    i have kept SW at location /database.
    Thanks.
    Edited by: user12071799 on Apr 2, 2010 5:42 AM

  • Weblogic run Error on Solaris~~~ Please Help

    I have a Bizzare error and dont know how to solve it.
    I have set-up one Sun Netra T-1 with a product called Cisco ACS
    (Advanced Cisco Secure). This comes bundled with weblogic to interface
    it with Oracle database.
    Setup as follows:
    Sun Netra T-1, Solaris 8 (possiably 01/00 release but dont know how to
    check), Oracle 8i client 8.1.6 along with Cisco ACS 2.3.6 (which
    includes weblogic).
    All works well
    However, I have setup another Sun Netra T-1 (however this time its an
    AC200) with Solaris 8 (02/02 release), Oracle 8i client 8.1.6 with
    Cisco ACS 2.3.6.
    There is a script included with ACS that allows you to execute SQL
    statements from the CLI. However, on this second sun, weblogic just
    hangs and waits.
    The oracle client seems to work ok (I can run SQLPLUS to a Oracle
    server) ie: sqlplus user/password@server-name works ok
    I dont know where to star looking as boths systems are near identical.
    ANY sound suggestions would be welcome.
    Thanks in advance

    Maybe this should help you!!!
    -Create a login page that has user and password input text fields and
    a submit and cancel button.
    -Put the login.html file in public_html/docs/mydocs
    -Put the LoginServlet.java in /servlets/
    -Either fail to a page, or with a message from the servlet.
    11:16 JDBC:
    -Get the JDBC Oracle drivers from
    /big5/Data/bootcamps/weblogic/classes12.zip
    -Put this in C:\weblogic\lib\
    -Add this to your system classpath in the Control Panel (append
    ;C:\weblogic\lib\classes12.zip)
    -Edit C:\weblog\startWeblogic.cmd file append to:
    WEBLOGIC_CLASSPATH=...;./lib/classpath12.zip
    -edit your weblogic.properties file to have the following entry:
    weblogic.jdbc.connectionPool.raghuPool=\
    url=jdbc:oracle:thin:@192.168.1.1:1521:ORCL,\
    driver=oracle.jdbc.driver.OracleDriver,\
    initialCapacity=1,\
    maxCapacity=2,\
    capacityIncrement=1,\
    props=user=scott;password=tiger
    -STOP the server with the attached WebLogic Console. (Do not kill -9
    the server... BAD BAD BAD!)
    -Start the server from commandline (i.e. cd to c:\weblogic then run
    startWeblogic.cmd)
    -Attach your Weblogic console to your server
    -Click the "DATABASE" category; expand "JDBC Connection Pools"; view
    the new pool "raghuPool" (You will only see this if all the above was
    correct and sucessful)
    -To test this pool, go to C:\weblogic\examples\jdbc\oracle and modify
    the "simpleselect.java" file
    -Change the entries to have:
    Driver myDriver = (Driver)
    Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
              Connection conn = myDriver.connect("jdbc:oracle:thin:@209.157.221.36:1521:ORCL",
    props);
    -Change the select statement to have:
    Driver myDriver = (Driver)
    Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
    Connection conn =
    myDriver.connect("jdbc:oracle:thin:@209.157.221.36:1521:ORCL", props);
    -Compile this file with: javac simpleselect.java
    -cd to c:\weblogic (unless you removed the package line at the top of
    simpleselct.java)
    -Run this file with: java examples.jdbc.oracle.simpleselect
    ENTERPRISE JAVA BEANS (EJB):
    -EJBObject deals with ENTITY BEANS. Extends java.rmi.Remote.
    Steps of hands-on tutorial:
    http://developer.java.sun.com/developer/onlineTraining/Beans/EJBTutorial/step1.html
    1) Create interface Demo that extends EJBObject. (Remote)
    2) Create interface DemoHome that extends EJBHome. (Home)
    3) Create a class called DemoBean that implements SessionBean. (Bean)
    4) Compile java files and create a Deployment Descriptor.
              java weblogic.ejb.utils.DDCreator -dir ejb/demo
              ejb/demo/DeploymentDescriptor.txt
    5) Setup the WebLogic server (tons o' stuff there)
    6) Write the DemoClient class. (or any web-based client)
    [email protected] (Micos Attile) wrote in message news:<[email protected]>...
    I have a Bizzare error and dont know how to solve it.
    I have set-up one Sun Netra T-1 with a product called Cisco ACS
    (Advanced Cisco Secure). This comes bundled with weblogic to interface
    it with Oracle database.
    Setup as follows:
    Sun Netra T-1, Solaris 8 (possiably 01/00 release but dont know how to
    check), Oracle 8i client 8.1.6 along with Cisco ACS 2.3.6 (which
    includes weblogic).
    All works well
    However, I have setup another Sun Netra T-1 (however this time its an
    AC200) with Solaris 8 (02/02 release), Oracle 8i client 8.1.6 with
    Cisco ACS 2.3.6.
    There is a script included with ACS that allows you to execute SQL
    statements from the CLI. However, on this second sun, weblogic just
    hangs and waits.
    The oracle client seems to work ok (I can run SQLPLUS to a Oracle
    server) ie: sqlplus user/password@server-name works ok
    I dont know where to star looking as boths systems are near identical.
    ANY sound suggestions would be welcome.
    Thanks in advance

  • Error in Solaris but not in Windows

    I have an application that is reading from a database, cleaning the results of all html tags, and writing to a new database. It all works fine on a Windows machine with jdk1.3. However, it throws the error I have attached to the message on the Solaris box. It has to do with the html cleaning. When I take it out, it works on both machines. Why though. Here is the code for the html cleaning and the error: 5 Dukes to whoever can help.
    Code:
          * Removes the html formatting for a string and stores it in a file
          * @return java.lang.String
          * @param htmlText java.lang.String
          * @param outputText java.lang.String
         public static String removeHtml(String htmlText) throws IOException     
              String returnValue = "";
              EditorKit kit = new HTMLEditorKit();          
              Document doc = kit.createDefaultDocument();          
              // The Document class does not yet handle charset's properly.          
              doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);          
              try          
                   // Create a reader on the HTML content.     
                   Reader rd = new StringReader(htmlText);
                   // Parse the HTML.               
                   kit.read(rd, doc, 0);               
                   //Write the cleaned text to file
                   //writeOutputFile(doc, outputFile);     
                   //Set returnValue to cleaned text
                   returnValue = doc.getText(0, doc.getLength()).toString();
              catch (Exception e)          
                   e.printStackTrace();          
              return returnValue;
         }Error:
    java.lang.NoClassDefFoundError: sun/awt/motif/MToolkit
    at java.lang.Class.forName1(Native Method)
    at java.lang.Class.forName(Class.java:142)
    at java.awt.Toolkit$2.run(Toolkit.java:533)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:524)
    at java.awt.Toolkit.getEventQueue(Toolkit.java:1179)
    at java.awt.EventQueue.isDispatchThread(EventQueue.java:534)
    at javax.swing.text.StyleContext.reclaim(StyleContext.java(Compiled Code))
    at javax.swing.text.StyleContext.reclaim(StyleContext.java(Compiled Code))
    at javax.swing.text.AbstractDocument$AbstractElement.finalize(AbstractDocument.java(Compiled Code))
    at java.lang.ref.Finalizer.invokeFinalizeMethod(Native Method)
    at java.lang.ref.Finalizer.runFinalizer(Finalizer.java(Compiled Code))
    at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java(Compiled C

    Here is the code where I am calling the html cleaner method. This works fine in a Windows env but fails in Solaris. If I comment out the call to removeHtml(value).trim it will work. It will even work if I make a different call removeHtml("string to strip") from the main method. Why would it work in one place but not the other in Solaris, and why would it always work in Windows? Does anybody have any ideas?
               while (rs.next ()) {
                    for (int i = 1; i <= columnCount; ++i) {
                        String value = rs.getString (i);
                        if (rs.wasNull ()){
                            value = "<null>";
                        String columnName = rsmd.getColumnName(i).trim();
                        if(clean&&(columnName.equalsIgnoreCase("DESC")
                                  ||columnName.equalsIgnoreCase("HEADER")
                                  ||columnName.equalsIgnoreCase("TEXT")))
                             //Clean the text
                             //value = removeHtml(value).trim(); //remove html markup
                             value = value.replace('\n', ','); //remove new lines
                             value = value.replace('\r', ','); //remove carriage returns
                             value = replaceString(value, "&mdash", "-"); //remove dash markup
                           outputBuffer.append (value.trim());                      
                        outputBuffer.append ("||");
                    outputBuffer.append ("{{NEWLINE}}");
                }

  • Relocation Error In Solaris - Symbol 0FI__rtbi_fv not found

    Hi!,
    I get the following error, when i try to load a library using JNI, (jdk 1.3.0_02) in Solaris 2.6 :
    It cribs about symbol __0FI__rtbi_fv not found.
    I used nm on the .so and got the following output -
    [123762] | 0| 0|NOTY |GLOB |0 |UNDEF |__0FI__rtbi_fv
    Kindly help me in overcoming this problem. Its bit urgent.
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /disk1/anuj/Sinu/usrtool/obj/libusrtool.so:
    ld.so.1: /disk1/sriram/java1.3/bin/../bin/sparc/native_threads/java:
    fatal: relocation error: file /disk1/anuj/Sinu/usrtool/obj/libusrtool.so:
    symbol __0FI__rtbi_fv: referenced symbol not found
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1382)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1306)
         at java.lang.Runtime.loadLibrary0(Runtime.java:749)
         at java.lang.Runtime.loadLibrary(Runtime.java:737)
    regards
    Sriram

    It is not in the java documentation because it is not a java problem.
    When you write JNI code (or any other code for that matter) you probably should look at the documentation for the compilers and other tools that you are using for recommendations for how to use these third party tools.
    What would have been surprizing to me, is if your C++ compiler manual did not recommend linking with the standard C++ library when you use code contained in the library. Which was the problem here.

  • Apple AL wireless keyboard error when pairing

    All was well with this keyboard until just recently. I've tried to pair this keyboard with 4 different Macs of mine (all 10.5.4/5) and get the same error over and over:
    The pairing attempt was unsuccessful. Make sure your keyboard is in range of this computer, turned on and "discoverable". When ready, click Continue to try again.
    Unable to pair with your keyboard. Click Continue to try again.
    Took it to the local Mac shop (over 100 miles away) and they got it to work with two of theirs after trying a little bit. Asked me to try again.
    As expected, no dice. Same error.
    Any suggestions (other than fresh batteries)?
    Thanks

    Hi Glenn:
    If the KB will not pair with any of your Macs, I strongly suspect the KB is failing (failed). A 100 mile drive is not a happy thought. Perhaps you can call Applecare (hopefully the KB is in warranty) and have them send you a replacement.
    Barry

Maybe you are looking for

  • Read a specific line of a txt file using vba not using line by line, Leer una Linea especifica de archivo de texto sin recorrer linea por linea

    Buenos días - Good morning Mi pregunta la escribiré en español y en ingles y espero alguien tenga la solución. I'll write my question in Spanish and English and I hope someone has the solution. SPANISH Creé una Macro en VBA que lee mas de 200.000 arc

  • Refund of security deposit

    I was recently speaking with someone about the security deposit ($400.00) that I needed to pay when I signed up with Verizon. That person mentioned that I have to basically stalk them to return the money, because if I don't they wont automatically cu

  • Function module to find out DATA BASE size, free space, used size

    Is there any function module to find out DATA BASE , free space, used size FM that gives all the details of the Date base what data base, what is the size, free space, used space etc... instead of writing case by case for each data base. based on  CA

  • A table contains user data.

    Is there a table that contains User data(logon account). At SU01->Address , There are 'Person' box. I'm looking for a table contains those contents.. Thank you

  • Production server data read

    Hi Experts       Can we read data from developement client to production client and its database table. I used the following query, SELECT ebeln        aedat        lifnr        zterm        FROM ekko CLIENT SPECIFIED INTO table itab WHERE MANDT = '3