KeyBoard Hangs Randomly with VDI 3.1

Hi All,
I have a customer running VDI 3.1. with Vbox as Desktop Provider
The keyboard hangs randomly at certain VM at certain times.
How can I fix this issue, please
Thanks in advance,

I am also having this problem. I am getting random keyboard lockups at the VDI login screen. This only occurs at the login screen.
When this happens, my only option is usually a Stop+A. on some rare occasions a Ctrl+Alt+BkSpace-BkSpace may work.
Also if using a smartcard, puling it out and inserting it in again will do the trick.
We are using Type 7 Arabic keyboards.
I found a similar problem "http://blogs.sun.com/sjf/entry/keyboard_layout_problems_with_sun" related to kbd and java, but that was for another kiosk session type and I did not know if it is the same problem.
Also read that it may be a bug with the type 7 KB sending too many signals while idle, but this I can't seem to dig up the page I read it on.
We have also upgraded to VDI 3.1.1 and we still have the same problem.

Similar Messages

  • System hangs randomly with hard disk problem

    I got some problems with random system failures. After a couple of hours my system isn't usable anymore. Most programs freeze and if I try to start new programs, I get a I/O error message. System console writes many errors like this:
    [ 3728.036223] systemd-journald[127]: Failed to write entry (18 items, 517 bytes), ignoring: Read-only file system
    Then I have to reset my hardware. This problem occurs since two days. I made an update lately, but I can't remember if that problem occurred after that update.
    What can cause such a problem? Where do I find relevant log files?

    I just checked my SSD with smartctl. It displayed a warning with a link to: http://www.tomshardware.com/news/Crucia … 14544.html. That sounds like my problem. I try to update my firmware.

  • Key board hangs up randomly with 8155B controller while running the application.

    Key board hangs up randomly with 8155B controller while running the application.

    Roopal,
    This question has too much parameters. In order to help you out, I need to know more information. For example:
    1) Is this a new issue? Has your keyboard worked fine before?
    2) Is you keyboard hanging up when you run a specific application? Does it hang up at boot up?
    3) What operating system are you running?
    Regards,
    Claudia Lorente
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Keyboard hangs on MacBook Pro with Windows 7

    I have a 2008 MacBook Pro and Windows 7 RC installed with Boot Camp drivers.
    More and more, the keyboard hangs. Sometimes it does not register a keystroke (for about 1 second), and shortly thereafter it hangs on 1 keystroke (pressing a random key once results in about 30 of that characters on screen).
    I know Windows 7 is still not officialy released, but I do hope this gets fixed in the near future. I have had many Windows 7 installs, including previous versions. They all had the same issue.
    The problem seems to be the Keyboard manager. Windows 7 also reported that this service was using more than usual resources, causing it to be bad for battery life.

    Same problem here. I already installed Windows 7 and then Windows XP to see if this was a Win7 issue but on both OS the issue is occurring.
    Delay with the Keyboard when press a key. Sometimes it writes 30 or more of the same character.
    I can't do the double fingers/right click most of the times since the drives seems to hang and multitouch trackpad stops to recognize the two fingers right click. It eventually come back working OK from time to time and then stops working again.
    Bootcamp 3.0 did not resolve the issue for me under Win XP and Win 7

  • Key board hangs up randomly with 8155B.

    Key board hangs up randomly while running my application .It works fine initialy ,after some time it gets hang and after restarting the pxi it detects the keyboard finely .I am not running any special application but the one which i use regularly .The OS in PXI is Windows 98 .

    Roopal,
    I am assuming that your controller used to work fine and the keyboard start hanging up recently. How recent?
    The PXI-8155B controller was released aproximately 4 years ago. The keyboard hanging issue could be caused by a keyboard PS-2 connector with bad contacts (if this is the case, you might need to send your controller for repair.), or that your keyboard itself has a bad cabel or PS-2 connector. Have you tried with another keyboard? Do you have another controller that you could use to run the same application? This last troubleshooting step coudl help you find out if this is a hardware issue or a software issue.
    If your computer hangs only when running your application, could you give a short description of what your application does? Does it communicates with the serial ports?
    Does your keyboard hang if you are not running your application? This is, does your keyboard hang if the controller is just showing the desktop and not running any application? If so, it could be that there are some corrupted files in the system. You could try reinstalling the operating system. Before doing that I recommend you to back up all the data that is in your hard-drive. You can reinstall the operating system using the operating system files that are saved in the C:\IMAGES folder in your PXI-8155B controller. You could re-install the operating system wihtout erasing any data, or you could erase all the data inyour hard-drive but the images folder, and re-install the operating system from scratch. More detail steps on how to do this are in the following KnowledgeBase:
    KnowledgeBase 1KBB15G4: How Do I Restore the Operating System on a VXI or PXI Embedded Controller?
    Please feel free to contact the Applications Engineering Department directly, and we will help you troubleshoot. To do this, create a service request number at http://www.ni.com/ask. There, choose "Phone NI" as the communication method.
    Related Discussion Forum:
    "Key board hangs up randomly with 8155B controller while running the application"
    Regards,
    Claudia Lorente
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Problem with program hanging randomly on certain commands from win 7 pro client to SB Server

    Having a problem with program hanging randomly on certain commands from Win-7 Pro Client to SB Server Both 64-Bit
    Five other slower XP-Pro 32 Bit systems though they are older and slower systems do not seem to hang as readily if at all.
    It has been very frustrating as the Client-System, SB-Server and Program should work w/o any hitches, but this seems to work fine @ times and then hang randomly.
    Would appreciate any and all suggestions in assisting.... JimBAgde-MSS  

    You can try this, as I have had similar problems with another MS Access .MDB file and slow access before. This fixed my problem for me. On the slow computer, make sure the program is set to see the .mdb file via UNC path, not a mapped drive letter. ex.
    USE:  \\yourserver\shared\dental\file.mdb
    DO NOT: S:\\shared\dental\file.mdb
    hope this helps

  • When exporting many videos with Lightroom 5, the process hangs randomly and needs to be restarted.

    When exporting few videos, the process hangs randomly. The processor performance is 0 % and the lightroom says it is working (actually it is not). I have to quit lightroom, kill all processes like amecommand.exe, Adobe Media Core, Adobe Dynamic Link Manager and restart the process. It stops randomly.
    I am exporting ALL-I videos from Canon 5D mark  III, into H264, high quality.
    PS: The same situation was with Lightroom 4.

    Hello,
    i have the same problem on LR5.5 on Win 7 (8G RAM)
    Thank you for any help.
    Petr

  • Macbook air hangs randomly

    My macbook air 2012 hangs randomly, when it happens the only thing i can do is push the power button and restart. I tought it was mavericks related so installed ML again but it still freezes sometimes. The log of the few minutes before the freeze:
    <APSConnectionNotificationQueue: 0x7fd82c247530>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    Jun  2 18:28:35 --- last message repeated 4 times ---
    Jun  2 18:28:42 MacBook-Air-van-Gregory.local WindowServer[79]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    Jun  2 18:28:42 MacBook-Air-van-Gregory.local WindowServer[79]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    Jun  2 18:29:59 MacBook-Air-van-Gregory.local WindowServer[79]: CGXGetConnectionProperty: Invalid connection 73143
    Jun  2 18:30:25 --- last message repeated 4 times ---
    Jun  2 18:30:25 MacBook-Air-van-Gregory kernel[0]: SMC::smcIH WARNING: unexpected interrupt: 0xf2
    Jun  2 18:30:34 --- last message repeated 1 time ---
    Jun  2 18:30:34 MacBook-Air-van-Gregory.local Safari[151]: CGContextGetCTM: invalid context 0x0
    Jun  2 18:30:34 MacBook-Air-van-Gregory.local Safari[151]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: invalid context 0x0
    Jun  2 18:30:34 MacBook-Air-van-Gregory.local Safari[151]: CGContextGetCTM: invalid context 0x0
    Jun  2 18:30:34 MacBook-Air-van-Gregory.local Safari[151]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: invalid context 0x0
    Jun  2 18:30:38 MacBook-Air-van-Gregory.local WindowServer[79]: CGXRegisterWindowWithSystemStatusBar: window 10 already registered
    Jun  2 18:30:39 MacBook-Air-van-Gregory kernel[0]: SMC::smcIH WARNING: unexpected interrupt: 0xf2
    Jun  2 18:30:49 MacBook-Air-van-Gregory.local Safari[151]: CGContextClipToRect: invalid context 0x0
    Jun  2 18:33:05 localhost bootlog[0]: BOOT_TIME 1401726785 0
    And Ertre checks:
    EtreCheck version: 1.9.11 (43) - report generated 2 juni 2014 18:54:28 CEST
    Hardware Information:
              MacBook Air (13-inch, Mid 2012)
              MacBook Air - model: MacBookAir5,2
              1 1.8 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 512 MB
    System Software:
              OS X 10.8.5 (12F45) - Uptime: 0 days 0:21:56
    Disk Information:
              APPLE SSD TS128E disk0 : (121,33 GB)
                        disk0s1 (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) / [Startup]: 120,47 GB (108,48 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Internal Memory Card Reader
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Anywhere
    User Login Items:
              None
    Internet Plug-ins:
              JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
              QuickTime Plugin: Version: 7.7.1
              CitrixICAClientPlugIn: Version: 11.2.0 Support
    Audio Plug-ins:
              AirPlay: Version: 1.7 - SDK 10.8
              iSightAudio: Version: 7.7.1 - SDK 10.8
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
    3rd Party Preference Panes:
              Citrix Online Plug-in  Support
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   1%          WebProcess
                   0%          System Events
                   0%          fontd
                   0%          Safari
    Top Processes by Memory:
              246 MB          WebProcess
              135 MB          Safari
              57 MB          mds
              45 MB          WindowServer
              37 MB          Console
    Virtual Memory Information:
              1.93 GB          Free RAM
              889 MB          Active RAM
              63 MB          Inactive RAM
              1.14 GB          Wired RAM
              240 MB          Page-ins
              0 B          Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • 2008 MBP 5,1 hangs up with no response from kb/tp/mouse, 2008 MBP 5,1 hangs up with no response from kb/tp/mouse

    My late 2008 MBP 5,1 is hanging up with no response to the keyboard/mouse/trackpad & hence no diagnostics that I know of.  I did see my wife's userid running Safari have the screen go berserk with random moving black & white "snow" before the whole display became unreadable.   Reboot & everything appears normal at this time but the hang-ups are constant.   I am running OS X 10.10.
    Any suggestions/help would be appreciated.
    Thanks in advance...billgr0248

    I don't know where the comments about the phone & all came from...I am running OS X 10.10.

  • BOBJ WEBI XI 3.1 SP 6 Report hangs randomly

    We upgraded the BOBJ XI 3.1 SP3 to SP6. We're now noticing that the WEBI reports are hanging randomly. It doesn't trigger any DIA session in BW backend. It looks like connection issue between BOBJ and BI. If I close the report and refresh it again, it runs fine. It is happening very randomly and there are enough DIA processes available in BW. We're currently on BW 7.0 ENHP1 SP 08.
    Has anyone faced this issue? Is there any way we can perform the connection trace between BOBJ and BW?
    Thanks,
    Milind

    Milind,
    First, SP6 is not an option. Please upgrade to 6.3 or SP7. because it contains several problems with calculation engine and merge dimension.
    maybe your problem is fixed after updrade

  • Keyboard is randomly unresponsive after latest Mavericks update. How to fix this?

    My keyboard is randomly unresponsive for a minute or two after the latest update. This happens a few times a day. Does anybody else experience this problem?
    I'm on a 2011 Macbook Air, using Mavericks.

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Bad keyboard causing random lockups and not allowing booting up?

    Will a bad keyboard, or keyboard port, make a computer lockup and keep it from rebooting? 
    I have a slimline s3200n that has been having random lockups.  When I try to reboot it, it gets stuck at the startup screen (the one where you get the F9, F10, etc options).  I can hit F9 for hours and the computer does nothing.  I have to do another hard shutdown and if I wait for a little bit the computer will start back up again.  Will work fine, then randomly lockup and go through the cycle again.
    I tried to run the Hardware diagnostic utility but it gave me an error, didnt write down the exact error, but it was a timeout error while gathering hardware information.
    I am using the keyboard that came with the computer and I do not have another keyboard to use for a test.

    I have this exact same issue, and am wondering what to do. I have a 2.2 GHz Intel Core 2 Duo and am using 10.4.11 as software. I have a Dell monitor. Anyone have any thoughts?

  • Iphone 5s Hangs randomly after upgrading to IOS 8

    I am bit worried about IOS upgrade. I am using Iphone 5s since March 2014. Till date it was working fine. But when I upgraded my Iphone from IOS 7.1.2 to IOS 8 problem starts arriving.
    Symptoms :      1. The phone hangs randomly after upgrade.
                            2. After selecting any application , it disappear suddenly. I have to start the application again. This mostly happen when I select Setting icon
    This is very much embarrassing that I am using one of the best phone in the world and it hangs automatically when I need it most.
    The only resolution for hang phone is to reboot.
    I upgraded to latest IOS 8.0.2 but still no improvement. I am expecting Apple team to look into this issue and resolve it. Waiting for your response.

    I have 5 Iphone 5's and Ipad Air. All upgraded to ios8. Everyone locks! it is so locked you have to hold home button and power button serial times. It reboots and just shows apple. When you use Safari, or type a text message, they just get behind then lock up with half a screen or half the icons.
    All my kids hate their devices now. I know Apple will fix. It is scary as i have never seen iPhones actually lock up and un-usable. this should have been caught in Beta. Perhaps Apple should get some "Real" outside normal users to beta. The ones they are using are not catching this stuff. Code is complicated, Apple has the best minds, Just keep holding the Home button and power button. Eventually it will reboot. Then close all the open apps. and don't tilt the phone sideways.
    Also close all un-used webpages left open in safari. this seems to fix.
    As for the Bug about lagging while texting and half screen lock ups. that needs to be fixed ASAP.
    I know from building things, there is always a few hiccups. Yelling won't do anything, give Apple a chance to fix it. I love Apple, and will continue to purchase the items. The world economy is changing, suppliers are going green, thus you get cheap bendable parts too. Apple will find the middle ground and work the problem. Please all post they read these blogs.
    If Apple deletes your posts and denies these problems then email Tim Cook. He does listen. Give it a week then it will all be sorted out. If apple sold iPhone 6 pluses that bend, then i am sure they will offer a replacement. Apple does care, May seem arrogant but they always come through at the end.
    Hang in there, i always rush and put the update on the minute it comes out, over and over, then complain about the bugs. Better to wait a month. i am addicted to new and better and just click upgrade. My fault too. I know better after 37 years with apple.
    Kind Regards,
    B

  • When I open Pages from the dock, the page comes up but immediately hangs up with the

    When I open Pages from the Dock,  the page comes up on the screen but immediately hangs up with the rainbow circle spinning.  I finally have to force quite to make it go away.  It does not ask me to choose a template.  This is sporadic, sometimes working, sometimes not.  What is going on?

    Helo,
    Did you try to delete Pages' preferences file(s) in the folder your-user-name/Library/Preferences ?
    There are one or more (depends on your OS X version) file like "com.apple.iWork.Pages.plist"
    You can also repair permissions with Disk Utility in the folder Applications/Utilities.
    Choose the hard drive were Pages is and click the button "Repair permissions".
    Or you can re-install Pages.
    Hope this will help.

  • Is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch

    is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch?
    I know there are more threads about this subject but none was really an answer.
    I got a keyboard (brand medion) with a ps2 connector. i wanted it to connect to my macbook so i bought an ps2 to usb connecter.
    wile connected with my macbook the keyboard leds flash one time like they do when you put it in a ps2. but after this just doesn' t work
    I think i might miss a driver or its just turned of somwhere in the system. an previous answer was said something about a safe reboot and a lot of codes but thats to hard for me.
    so any good solutions????

    I've never found a PS2 to USB adapter that worked, or IIRC I've never found one at all. I have USB TO PS2 but not the other way. Just go out and buy a new keyboard. PS2 is so late 90s/early 2000s

Maybe you are looking for