Keyboard in a Windows boot partition.

I have a windows boot partition. Can I use my wireless keyboard in this environment? Is there a place to download drivers or whatever? Alternatively, is there a USB keyboard or whatever I can buy to work with my iMac in this partition environment?

Penguin555 wrote:
Penguin555 wrote:
where can I get windows 7 keyboard and mouse drivers for bootcamp?
I have installed Windows 7 in a boot camp partition. I can only use usb keyboard and mouse by booting Windows intyo safe mode, and I am totally unable to use my Apple wireless keyboard and mouse. How do I resolve this?
I'm running Lion - 10.7.2. Boot Camp Assistant fails to download drivers - that issue has been going on for some time, and has been reported by others as well.
But that answers your question. You get the drivers by using BCA to download them. Your inability to download the drivers is a separate issue than not being able to use your wireless keyboard.
While some people may have issues downloading the drivers, many others have successfully downloaded the drivers. I have downloaded them fine on several different Macs. It may take a long time, depending on the speed of your internet connection. Mine took over 3 hours.
Regardless, you need to download the drivers using Boot Camp Assistant. Try again, and if you still have problems, start a new thread and provide as much details as possible to describe what your seeing so that we don't have to go through this back-and-fourth, and you'll get your answer quicker.

Similar Messages

(SOLVED) Dualboot Windows + Arch Linux (Windows boot partition)

Hi,
I have 4 partitions.
sda1: Windows boot partition (ntfs) - This has always been there
sda2: Windows Installation
sda3: HP_Tools - I need to keep this for warranty
sda4: Arch Installation
I want to use GRUB to have a dualboot option at startup. Do I need to install GRUB to the boot partition which is NTFS, this should be ext3 according to the tutorial.
Or can I just install grub on the Arch installation in the /boot folder?
Thanks already!
Last edited by AlexCogn (2012-10-02 15:02:10)

Scimmia wrote:
AlexCogn wrote:When I do that Windows just starts.
Then you didn't install grub to the MBR. Don't forget, installing the package isn't enough, you actually have to install grub to sda as a separate step.
So
# grub-install --target=i386-pc --recheck /dev/sda
# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
and then
# grub-mkconfig -o /boot/grub/grub.cfg
I forgot the installation ... I'm trying it in half an hour, thanks already for you help guys!

Messed up Windows Boot Partition Installing Linux

I have rEFlt installed and I had put the Windows 7 x64 RC on my 13 inch MacBook Pro. I shrunk the partition and installed Ubuntu alongside it and now when I try to boot Windows it tells me there is a corrupt file in the BCD (which is the windows boot sector). I have this problem a lot messing with partitions so I stuck the RC in my computer and booted it and when I tried to access the repair tool it said this computer's install disc doesn't match the Windows installation (it's the exact same disc, I tried the Vista disc too and it gave me the same error). I tried supergrub and it didn't boot into it right so I can never access the right stuff. I was wondering if there's a program I can pull from the internet or something to run in OS X that fixes the BCD. My Ubuntu partition works (sort of, Ubuntu is definitely not meant for Macs) and I tried running ms-sys or something by that name and it wouldn't compile right. I'm out of ideas and I would like to have Windows 7 working...

Figured it out. I have an odd feeling no one would have been able to help me anyway lol

Can I repair the Master Boot Record (MBR) or Volume Boot Record (aka Windows boot partition) for Windows XP using Windows Vista/7 commands?

I have an SSD drive whose file system is corrupt and unreadable and it's OS of choice is Windows XP SP3 32-bit. I don't have a Windows XP disc.
Is it possible to repair the Master Boot Record (MBR) or Volume Boot Record (VBR) using a Windows Vista or 7 Recovery Disc? What about a Windows PE disc?
I researched around the Internet and found a command in Windows PE called bootsect (http://pcsupport.about.com/od/bios-booting/ht/bootsect-nt60.htm) that can repair both older and new Windows Volume Boot Code (NTLDR or BOOTMGR). The link states that the
bootsect command does NOT fix the MBR. Even the technet site here lists a reference to bootsect and that it can repair the MBR of both old and new versions of Windows (which doesn't appear to be correct). Can I use bootsect to restore the VBR of XP?
If bootsect cannot help me, then what is its purpose? Possible ex: Someone has a dual-boot XP and 7 system, the user uninstalls XP, and then uses bootsect to write BOOTMGR to the VBC.
I would appreciate any insight. Again, I don't have an XP disc. But I do have a WinPE disc and Win 7 Recovery disc and I was hoping I could fix my XP MBR and/or Windows VBR with one of the two.
Thank you.

Checked these ?
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/bootcons_fixmbr.mspx?mfr=true
http://pcsupport.about.com/od/fixtheproblem/ht/repairmbr.htm
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Simple UEFI GPT Dual boot with windows 8 boot partition question.

Hi everyone,
I think it's obvious from the quuestion that I'm a newbie here (and from the location of the post) but I have read (several times):
https://wiki.archlinux.org/index.php/UEFI
https://wiki.archlinux.org/index.php/UEFI_Bootloaders
and the incredibly helpful:
https://wiki.archlinux.org/index.php/Beginner%27s_Guide
along with many forum posts. unfortunately this:
https://wiki.archlinux.org/index.php/Wi … _Dual_Boot
appears out of date and so I need to ask you fine people my question.
If I want to dual boot Arch with my Windows 8 my question is on the boot partition. I have an existing windows EFI boot partition. should I mount this partition to my "/mnt/boot/efi" folder and then copy the files to this partition when I am setting up rEFInd (my chosen bootloader from wiki page, comments/suggestions are welcome) or should I setup a separate boot partition for my arch installation. I assume from reading about rEFInd that the former is how I should do it as this seems to be how refind would be able to "see" my windows bootloader.
The reason I am double checking and asking here is I know that windows can be a temperamental beast and is very prone to not booting so I don't want to mess with the windows boot partition unduly.
Thanks in advance guys, looking forward to getting my arch working!
Last edited by crashandburn4 (2013-03-03 13:42:43)

$esp = EFI System Partition?
also, ok, gummiboot, I'm glad I can mount the esp as /boot (that was my original thought but reread the tutorial and wasn't sure) just double checking, it is the esp created by windows 8 that I mount?
in addition, as I am slightly new to this is there any tutorial that can tell me how to set up gummiboot? I've looked here:
http://freedesktop.org/wiki/Software/gummiboot
but don't see anything in the way of detailed instructions.
from your post: https://bbs.archlinux.org/viewtopic.php?id=159061
I'm gonna guess it's something like this (please let me know if this is right)
/mount $ESP /mnt/boot
pacman -S gummiboot
(after chrooting)
//exit chroot
gummiboot
*stuff saying gummiboot is not configured*
gummiboot install
is it something like that? can anyone point me towards a manual
Last edited by crashandburn4 (2013-03-03 14:58:53)

Partitioning ruined windows booting

I have installed windows using Bootcamp, but then I created more partitions using Mac OS X.
Now I cannot boot into windows again. The partition is there, but it won't show up when I hold (Options). Only the Mac OS shows up.
I went to System Preferences->Startup Disk and selected Windows to boot, and still won't work.
How can this be fixed ?
Macbook Pro
Mac OS X Snow Leopard
Windows 7 Ultimate.

Happens all the time.
There is a limit to where a Windows boot partition can reside and all the side effects of making changes. ... because you assumed it would work and went "outside the draw by the dots" lines in the Boot Camp Guide.
http:www.apple.com/support/bootcamp has link to PDF guide and support articles.
this is one case where the results are almost always failure. And plan on what to do, when it doesn't work so you can restore - something that even using Mac OS should be seen as mandatory and not to be taken lightly.
"I created more partitions" doesn't help or tell anyone how (shrink, split, expand, used commercial program, used gpart, used a linux tool), as well as created HFS volumes? more Windows NtFS volume? Apple will only say that Boot Camp Assistant is the only supported method to create a Windows partiton (Paragon CampTune can also) doesn't change anything.
Did you use iPartition? I wonder if CampTune can redo/undo.
Clone Mac HFS and undo those changes. Use OS X DVD and Disk Utility as well as any of the programs to clone Mac.
How To clone
Using Cloning as a Backup Strategy
Windows OS has to be on #4 or less partition number (and GPT and HFS as well as EFI partitions have to be accounted for as well, and Windows 7 will normally create its own 100MB "System Reserved" (which is the active boot partition for Windows).
Backup beforehand. Then you can restore and recover.

Connecting MacBook through external display in Windows Boot Camp partition

Hello everyone! I recently installed Windows Vista Home Premium on my MacBook 320GB. My Mac Partition of the drive works perfect, and connects through Mini DVI-Video through composite cables and into my T.V. When I tried this in Windows, I had no luck whatsoever. yes, all the drivers are installed for my chipset, processor, keyboard, etc. Windows is updated as well through Microsoft, But not through the Apple Software Update because the download failed again to the Boot Camp update. How do I connect an external display(ex. Projector, T.V., anything that has composite input)? Yes, I know some of you will say, "Your first mistake was buying Vista", but thats not the problem here. Windows Vista works perfectly. When you connect an external display, it re-adjusts its screen resolution but does not appear on the external monitor. Is the Boot Camp Update the solution? Please Help!!!
That was a lot of writing!
-Christian

I am using Vista on Macbook and when I connect my PC to my TV, lot of times, it hangs on me and a blue screen shows up with some errors and then it shut downs. I atleast do this 2-3 times and then finally it gets connected but there has to be a way where we can easily connect to TV without any issues. Any help guys?
Also I have noticed, my resolution on TV when I connect my macbook is 1900 x 1260 something... Is this related to resolutions?

How do I repair a Windows 7 partition when it is after Windows 8 partition in a Dual Boot Setup

I have a laptop that I purchased a year ago and which came pre-installed with Windows 8.
Recently, I successfully added Windows 7 as a dual-boot, and this worked OK. To obtain the space for Windows 7, I shrunk the Windows 8 partition.
In Disk Management, the Windows 8 partition is physically located after OEM and EFI partitions; Windows 7 partition is is adjacent to Windows 8.
All went well until I shrunk the Windows 8 partition further to increase the size of the Windows 7 partition, after which Windows 7 came up with a boot error....Windows 8 still boots OK.
I inserted my Windows 7 disk to perform a Startup/Repair, which failed because the first OS partition it sees is Windows 8 and a message tells me that I need to install the correct media for that system.
I searched for advice and assistance to solve the problem....to no avail - and had to completely re-install Windows 7 and the associated applications.....and I really don't want to have to go through this again.
I actually use Windows 7 more than 8, and if I have to lose one or the other, I would dump Windows 8.
So....is there a manageable way I can keep the two systems recoverable and migrateable to another disk in the future. If not, how do I safely remove the Windows 8 partition without damaging Windows 7? Ideally, I would just like to swap the partitions
round....but with EFI and BCD partitions, I am reluctant to go into the unknown.
Sorry....bit of a saga....but would appreciate any advice.
Rob Nick

Hi Rob,
Above all, as the purpose is to enlarge Windows 7 partition, please understand that shrink Windows 8 partition again cannot help on it. A partition can be expanded only if there is free space "after" it.
So you will still need to delete Windows 7 partition for expanding purpose.
If it is fine to just make Windows 7 back to boot order. Please try following command lines.
Note: Please run CMD in Administrator mode.
bcdedit /export “c:\boot”
This is a backup. You can delete it if things go successfully.
Then please create a new entry for Windows 7:
bcdedit /copy {current} /d “Windows 7”
It will provide an entry ID. Copy it and it will be used in following 2 command lines.
bcdedit /set {identifier} device partition=X
Replace X with the drive letter of Windows 7 system located.
bcdedit /displayorder {identifier} /addlast
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to restore Windows boot after resizing system partition ?

I have an fairly new HP Pavilion 14-n228ca notebook which I intend to use mostly for Linux, but still wish to occasionally run the WIndows 8.1 that it shipped with.
I installed CentOS 6.5 using the dual-boot procedure I have used many times in the past with XP and Vista, viz. resize the main NTFS filesystem, delete the partition and recreate it smaller at the exact same start byte.
Normally (on XP,Vista) Windows boots from GRUB, but here I get an error "file \Boot\BCD - missing or contains errors"
F9 at boot gets me a hardware boot menu, where I have a choice of "OS boot manager", EFI file, or "notebook hard drive". The last gets me GRUB. The first drops me to a repair menu where I can try autorepair, which fails, or a command
line.
The command line allows me to run diskpart and assign a drive letter to the system partition, at which point I can run chkfs successfully and access files.
If I try "bootrec /rebuildbcd" it finds one valid volume at \\?\GLOBALROOT\Device\HardDiskVolume4\Windows but then says "system cannot find the file specified"
How can I restore the ability to boot the Windows partition, preferably without messing up the Linux one ?

I have an fairly new HP Pavilion 14-n228ca notebook which I intend to use mostly for Linux, but still wish to occasionally run the WIndows 8.1 that it shipped with.
I installed CentOS 6.5 using the dual-boot procedure I have used many times in the past with XP and Vista, viz. resize the main NTFS filesystem, delete the partition and recreate it smaller at the exact same start byte.
Normally (on XP,Vista) Windows boots from GRUB, but here I get an error "file \Boot\BCD - missing or contains errors"
F9 at boot gets me a hardware boot menu, where I have a choice of "OS boot manager", EFI file, or "notebook hard drive". The last gets me GRUB. The first drops me to a repair menu where I can try autorepair, which fails, or a command line.
The command line allows me to run diskpart and assign a drive letter to the system partition, at which point I can run chkfs successfully and access files.
If I try "bootrec /rebuildbcd" it finds one valid volume at \\?\GLOBALROOT\Device\HardDiskVolume4\Windows but then says "system cannot find the file specified"
How can I restore the ability to boot the Windows partition, preferably without messing up the Linux one ?
assuming your recovery partition is still extant, you can run that and go back to factory
backup files first natually
use a virtual machine linux or cloud
Corsair Carbide 300R with TX850V2
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Professional x64
Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

About a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the scre

about a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the screen goes black and I can't go any further. I have tried to re-load the bootcamp drivers and try again. It does the same thing. Any help would be great.

i sue windows 7 and my orignal macintosh formated and get online same window

How do I restore data to a new mac with windows boot camp partition?

Hi
I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
and how do I do it?
right now im backing everything up on my MBP using super duper
both the MBP and the iMac are running on Lion

I am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
Links to more detailed info.
http://support.apple.com/kb/HT6025
http://support.apple.com/kb/PH11275
http://pondini.org/OSX/MigrateLion.html
http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp

Windows 7 partition not showing up at boot, but it appears within Disk Utility.

I have a Macbook Pro that's had 2 partitions for the past year. I created a 3rd partition yesterday and promptly deleted it.
Ever since, I haven't been able to boot in Windows - Mavericks is the only option. Disk Utility shows my Boot Camp partition, and that partition still appears on my desktop as a mounted drive (with all files intact).
I rebooted in recovery mode to open Disk Utility. In the top left corner, I hit the Apple menu > Startup disk, and Windows showed up as a bootable drive. I clicked on it, had it restart into Windows, and it almost worked. A black screen with a line command showed up. It said "No bootable device -- insert boot disk and press any key." No matter what I pressed, nothing happened, so I turned it off and back on into Mavericks.
I want to boot in Windows but have no idea what's stopping me. Any thoughts?

You could be seeing a Windows boot manager with XP and 7, but no, you can't do what you did and directly choose Windows 7. You can make it the default for Windows, use msconfig.

Could I reinstall OS X partition keeping the windows boot camp partition?

II have a OS x partition that need reinstall. In the same hd I have a Windows Boot camp partition. The question is, could I reinstall OS X partition without affect the Windows partition?
Thanks,
Jorge.

Sometimes it works, sometimes not.
Of course you should backup both.
Q: why do you think OS X needs to be reinstalled or something?
Disk directory trouble?
Because 3rd party disk utility can do better, as well as maybe clone Mac volume so you can boot and do more repairs.
Or maybe the partition table is shot. Or bad sectors. And bad sectors can require a full format.
In a perfect world, but disk drives and systems aren't

Default boot partition windows 2008

Hello
I have 2008 r2 standard server, and after a series of unfortunate events, it comes up with a dual boot partition choice when booting, with the default being a non-bootable partition so I have to hit the down arrow to select the correct partition when it
boots.
My question is, can I get rid of the options all together and just have it boot to the C: partition again?
thanks!

Hi,
On current situation, please confirm the correct boot partition via identifier that you can use. Then please
refer to the following articles and remove dual boot.
How
To Remove Windows 8 Dual Boot
How to Properly Delete a OS
in a Dual Boot
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If you are worried about above remove operation, please type msconfig in Run to open System Configuration.
Then navigate to Boot tab, select correct OS boot and set as default. Meanwhile, reduce the time of Timeout. Then check if can help you.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Keyboard in a Windows boot partition.

Similar Messages

Maybe you are looking for