Keyboard is not working after a while
After I've let my Mac sit idle for a while, the keyboard stops responding. I Have to unplug it from the USB and plug it back in to work. This happens a lot. What can I do?
In addition to Barbara's suggestions you could also try plugging another USB keyboard in and see if it repeats. At least you may know if its the port or the keyboard.
If you have other external devices in addition to the keyboard plugged in, try removing them and see if that makes any difference.
If neither of the above work you could also try the following:
PRAM Reset (Random Access Memory)
1) Shut down the computer.
2) Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3) Turn on the computer.
4) Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5) Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6) Release the keys.
or a SMC (System Management Controller) reset
1) Shut down the computer.
2) Unplug the computer's power cord.
3) Press and hold the power button for 5 seconds.
4) Release the power button.
5) Attach the computers power cable.
6) Press the power button to turn on the computer.
Similar Messages
-
Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7
Hello need help on weird happenings to my keyboard..
Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
All keys on keyboard is working and touchpad is also working.
But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
what do you think is the problem??
Hardware Issue? or Driver Issue?
please help thank you..Hello @MysticDragon ,
Welcome to the HP Forums!
I understand some of the keys on your keyboard are not working after installing Windows 7.
I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
Try this:
1. Click Start.
2. Click Control Panel.
3. Click Clock, Language, and Region.
4. Click Region and Language.
5. Click the Keyboards and Languages tab.
6. Click Change keyboards...
7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
8. Click on any other keyboards in the Installed services list.
9. Click Remove.
10. Repeat for all other non-English (United States) keyboards.
You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
HT3917 My apple wireless keyboard is not working after new batteries installed
My apple wireless keyboard is not working after new batteries installed.
Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.
-
My keyboard does not work after cleaning :-(
Hello, I have a MacBook Pro (bought in december 2009) an now the keyboard does not work after I cleaned it. This was on thursday and today it still does not work. Any ideas?
Chances are that you've shorted the terminals on the keyboard, and will need to be replaced… When the keyboard on unibody MacBook Pro's is replaced the whole 'top case' will be done, trackpad etc… Now generally it is highly unlikely that the Liquid submersion indicators will have been activated unless the cloth was saturated with water. Also unless you purchased the AppleCare protection plan your MacBook will be out of warranty and will require an out of warranty repair.
From knowledge out of warranty repair for a top case assembly it's £163 and a level 2 hardware repair is £28 -
Keyboard does not work after using Support Drivers
I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
I did a system restore to get it back to a usable state for the time being.
Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers
-
Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode
I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards -
Wireless Keyboard functions not working after upgrade
I have a HP Pavillion Elite m9080a desktop with a wireless keyboard 5189URF Running originaly on Vista but last week I upgraded to Windows 7 Home Premium. My problem is that the feature buttons on my keyboard are not working ie no volume control, CD/DVD controls not working, typing is ok. Also the caps lock / number lock icon is not appearing on the task bar. Also on my Monitor w2207h the two USB outlets are not working either. I need help please to restore these functions.
Yes.. its for windows vista.. run it with recomended settings..
if it dosent work then try following..
go to your device manager and see can you see some devices named " unknows devices"
if yes then >
Try following some steps
go to your device manager > right click on unknown devices > go to Properties > then Details tag
select from drop down list called Hardware ID's (PCI\VEN...) Copy it via right click...
and search it according to it on google or any serch engine you will get the right drivers..
here are the print shoot of process!
Hope it helps!
**Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
**Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer** -
Insert key of keyboard is not working after installing firefox
I was using IE8 as my browser before but recently changed to Firefox. My keyboard was functioning perfectly before I installed Firefox. Now whenever I type text (mostly when composing a message/draft in Google's gmail or Hotmail) the Insert key of the keyboard is not working. This is just not a problem in Gmail or Hotmail but with all programmes!!
Firefox is always in insert mode and doesn't support overwriting text, so you will have to use the Delete or Backspace key to remove unwanted characters.
-
Keyboard mouse not working after Windows update
Question was asked and supposedly answered b4, but didn't tell how to work around no keyboard or mouse. Ie: how do u get to device manager without keyboard/manager? I unplug to reboot and up down keys work in startup. However, when I open in safe mode, keyboard and mouse still don't work.
Windows 7- 64 bit
could an external mouse wk?Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
According to the message you have posted I suspect this could be because of the recent changes made if any
Note: You can use an External USB Keyboard and Mouse if in-built Notebook Keyboard is not working
Please perform the below shown steps to resolve the issue:
Step 01. Turn OFF the PC
Step 02. Power ON the PC and keep tapping F8 Key
Step 03. Select "Last known good configuration" from the Advance Boot Option list
Note: Wait till you get to the Windows Desktop
Step 04. Please remove unwanted startup items and uninstall unwanted applications
Step 05. Please reboot/restart the PC the normal way
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
What should I do if my keyboard is not working after updating to new OS Mavericks update?
I have a 13" MacBook Pro that was purchased in January 2014. Recently I installed the recommended updates for OS Mavericks on my computer. I rebooted the computer as recommended and when I went to login lo and behold my keyboard will not function. None of the keys will work so I couldn't even put in my login password to even see what the problem was. Naturally I went to all the apple forums I could, to find a solution and none of them seem to work. I reset the PRAM and SMC and still cannot get the keyboard to function. While under disk utility the keyboard functions just fine. But It will not function in a regular setting. I am very upset and frustrated with Apple as the issue is a software issue with OS Mavericks and Apple has yet to acknowledge a problem, meanwhile this is the second time in less than a month that I've had major issues after downloading Mavericks updates. I hope apple can resolve this issue.
Keep it connected to the Power for a while.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Any Bluetooth mouse with failing batteries nearby? -
Alum BT keyboard does not work after wake up - but BT trackpad does!
Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
- I have tried power button banging on it for a long time and does not work
- open mbair and type password in and remove keyboard and repair and after several tried it will work
- then I can close mbair and use external keyboard
- painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issueHello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator. -
Wireless keyboard does not work after waking up from idle
After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?
After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?
-
Cluster does not work after a while
Hi :
I have 2 clustered EJB server, the IP address is 192.168.0.226 and
192.168.0.227.
A servlet server is calling these two EJB servers with
t3://192.168.0.226,192.168.0.227:7001
All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
If I restart weblogic service, then the cluster works fine. but after while
the cluster does not work, all the client request goto only one machine, in
most case it's 227.
It has no use even if I restart the service in the losted server. I have to
restart all the server.
The weblogic.log in the losted server is like this :
Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1] gone:
weblogic.rjvm.PeerGoneException:
- with nested exception:
[java.io.EOFException]
Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1] gone:
weblogic.rjvm.PeerGoneException:
- with nested exception:
[java.io.EOFException]
Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a closed
connection
Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
weblogic.rmi.ConnectException: Attempt to sendMsg using a closed connection
Please help me
thanks
andrew
Are you running with any proxy? Is the servlet server also the static httpd
server?
What type of network equipment are you using? If its high-end (Cisco) make sure
all ports are set to 100/Full.
Also, try setting the SendDelay slightly higher (ie. 25, 30, 35). Experiment
with different values.
weblogic.cluster.multicastSendDelay=25
andrew wrote:
> Mike, thanks for reply
> The 192.168.0.204 is the servlet server.
> I changed the NICs to use 100Mbps/Full duplex. it looks better: the error
> msg is less than before, the it still happened.
> Any suggestion?
> thanks
> andrew
>
> "Mike Kincer" <[email protected]> wrote in message
> news:[email protected]...
> > Which box is 192.168.0.204 ??
> > It is communicating via multicast, which I would say is suspect.
> > Otherwise, I'd say you have some network issues.
> > Make sure all switch ports and all NICS are NOT set to "auto" config.
> Select
> > 100Mbps/Full duplex on all ports.
> >
> > andrew wrote:
> >
> > > Hi :
> > > I have 2 clustered EJB server, the IP address is 192.168.0.226 and
> > > 192.168.0.227.
> > > A servlet server is calling these two EJB servers with
> > > t3://192.168.0.226,192.168.0.227:7001
> > >
> > > All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
> > >
> > > If I restart weblogic service, then the cluster works fine. but after
> while
> > > the cluster does not work, all the client request goto only one machine,
> in
> > > most case it's 227.
> > >
> > > It has no use even if I restart the service in the losted server. I have
> to
> > > restart all the server.
> > >
> > > The weblogic.log in the losted server is like this :
> > >
> > > Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
> > > peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1]
> gone:
> > > weblogic.rjvm.PeerGoneException:
> > > - with nested exception:
> > > [java.io.EOFException]
> > > Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
> > > peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1]
> gone:
> > > weblogic.rjvm.PeerGoneException:
> > > - with nested exception:
> > > [java.io.EOFException]
> > > Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a
> closed
> > > connection
> > > Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
> > > weblogic.rmi.ConnectException: Attempt to sendMsg using a closed
> connection
> > >
> > > Please help me
> > > thanks
> > > andrew
> >
> > --
> > /\/\i|<e
> >
> > Mike Kincer
> > Solutions Developer/Engineer
> > Atlas Commerce "ebusiness evolved"
> > Office phone: +1-607-741-8877
> > mailto:[email protected] [http://www.atlascommerce.com]
> >
> >
/\/\i|<e
Mike Kincer
Solutions Developer/Engineer
Atlas Commerce "ebusiness evolved"
Office phone: +1-607-741-8877
mailto:[email protected] [http://www.atlascommerce.com]
-
Keyboard does not work after logon. after build upgrading to build 10049
Hi,
I orginally posted the question on
communities they suggested I posted the question here. So here it is:
I installed technical preview on a windows 8.1 hyper-v. After upgrading to build 10049. I can do a logon on the system but after wards my keyboard doesnt't work anymore. I tried connecting to the vm with remote desktop aswell as with the hyperv
connect. But no still no keyboard.Since your keyboard fails when using RDP - this is not a hypervisor issue.
Seems to be a device issue, or an RDP issue.
Also, you are asking about a Preview. So anything goes, and anything fails.
I am assuming you tried rebooting the VM.
And since 8.1 is your Hyper-V host, disable "Enhanced Session Mode" in the settings of the Hyper-V server. Why? Because this still uses RDP instead of a pseudo console.
Doing this will give you a clue if this is an RDP issue.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Keyboard is not working after upgrade
Upgraded iTunes this morning and now my keyboard (not wireless) is typing all funny fonts. some keys do produce a symbol and others don't do anythign at all. it's the only upgrade I see in my updates files in weeks. Please advise.
Hello there, Phalesch.
The following Knowledge Base article offers up some great steps for troubleshooting issues with keyboard response:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
Looking for some help/ideas on a deployment.
Hi, I'm currently about to attempt to migrate from my FreeBSD based Postfix/Dovecot/Squirrelmail/Spamassassin/Procmail based conglomeration of doom to Solaris 10/JES. I've toyed around with JES a bit (I downloaded the two cd release, 2005Q4 I believe
-
When I have my 32GB I-Pod touch ( 3rd Generation ) plugged into my PC, the internet works fine. When I unplug it, it says I'm still connected, but can't load anything. What's going on?
-
Can a footnote be spread over two pages
I dislike having footnotes always keeping together in a block, and shifting to the page following the footnote reference marker in the text. (And it is very problematic to fix this for each individual case especially over a book of 900 pages.) Is the
-
Delete function locks programme on laptop, not on desktop
When deleting RGB photos from my laptop, this fun ction locks the programme, but this does not happen on my desktop cs6. Any ideas, please
-
Lost ibooks icon on iphone5S-IOS8.1.3
I have lost ibooks icon on my iphone 5S-IOS8.1.3. I have tried to redownload from app store but it does not work. Please help me to retrieve the ibooks icon on my iphone screen. Thank you