Keyboard issues after recent update

so last week I updated my iPad 2 to the newest update ... After that my iPad is unstable and constantly crashes ...and the worst of it is the keyboard pops up and covers where I'm typing , so I cannot see what I'm typing or being able to correct it . I'm very upset right now

My iPad Mini is working just fine with iOS 8.3, so avoiding updates is not the answer. If you have restarted the device, reset it, restored from a backup, and then restored as new, not using a backup and the keyboard is still malfunctioning, then there is something else going on. Make an appointment at the Genius Bar of the nearest Apple Store to have the device looked at.

Similar Messages

Spectre x360 keyboard issue after recent bios update

Hi Folks, I have a spectre X360 and I am really happy with it. Great product. I recently updated the bios and it was really nice to be rid of the glowing keyboard light LED. There is an issue that has popped up though which is incredibly frustrating, like incredibly annoying, and I was wondering if anyone else has noticed this. The keyboard response to typing a double letter (such as the t in letter) has gone down. In other words my typing speed is now limited because the keyboard isn't as sensitive as it was prior to the bios update. Does anyone know of a setting somewhere where I can increase the sensitivity of the keyboard so I'm not constantly going back to correct a missing double letter? Please! argh it sucks so bad. It has ruined my experience with this machine. -Sam

Hello ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Spectre x360 and TouchPad sensitivities not working correctly. Here is a document on how to troubleshoot the Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad pointing sensitivities it should help resolve the issue. It also shows you how to restore the default setting that could help as well.
Hope this fixes your issue.
Thanks.

Few issues after recent updates

I updated my system day before yesterday and after booting I noticed that the last update didn't go smoothly.
My current setup is Arch stable on Thinkpad X201 on a docking station with external monitor with 1920x1200 resolution.
Issues I have noticed are following:
The console framebuffer seems to limit itself on only part of my screen, perhaps 1024x768 or something like that. The picture is aligned to top-left corner.
When I started StumpWM for the first time the whole X was using 800x600 resolution or similar, using xrandr I could select the 1920x1200 resolution but the StumpWM itself only seemed to use the same portion of the screen as the console framebuffer.
I then edited my xorg.conf and removed all 'non-essential' stuff from it and added "Modes '1920x1200'" to Screens section to get correct resolution when starting X but StumpWM still only use the smaller part of screen.
I then switched to Fluxbox which seems to work with correct resolution. It still has problem in Firefox. The firefox address bars list of addresses is aligned to screens left side instead of being just below the address bar.
Then I noticed that my keyboard won't work correctly. Prior to update I could use my keyboards fn+key combo but now it doesn't work. I use Happy Hacking Keyboard Pro 2.
Any idea how to get my keyboard and stumpwm to work again? StumpWM might be WM issue but it is pretty odd still.
Keyboard issue is more pressing as I can't type umlauted chars with it.
Last edited by Zmyrgel (2010-06-23 06:56:52)

Got the keyboard issue fixed. Apparently the xmodmap file I've been using won't work with the new xorg.
Still need to find why the console and stumpwm is working incorrectly.

IPhone 5 Power button issues after recent update.

After this most recent update, my power button is not working as it normally does. It takes two or three attempts to turn the phone off and more than once to turn it. Sometimes it turns on and immediately turns off. This is happening only after this update.

Yes 7.1.2 I had a 7.1 backup, and no issues with that... but then I did a clean DL of 7.1.2 and once again with NO apps on the iphone power button issues... as mentioned. So it is not the apps, nor songs, nor anything else...just 7.1.2 I am now running 7.1 no issues.

Serious issues after recent updates this weekend

Hey guys, Recently i upgraded to leopard with a clean install, ran GREAT for about 1.5 weeks i hadnt updated from apple through softwareupdate yet untill saturday of this past weekend, since then i would have multiple pixels going crazy on screen, or lines would appear all the way across the screen, then the computer would lock up and only the trackpad would respond. Id restart it, and it would be stable for 10 mins, then do the same thing over again. Finally last night it just locked up after pixels and video freaking out for a good 30 mins on and off. Now when i try to boot i get the gray screen with a folder and question mark located in the middle. I should mention earlier when i encountered this problem i figured id reinstall leopard. so i archived and installed, problem persisted. My mbp is a little over a year old. 2 gigs of ram 2.16 all from apple.
thanks for any help guys, im clueless as what to do
im getting sick of having apple issues from everything to my ipod touch, iphone, macbook pro batteries and now the laptop.

Thankyou very much kappy for the quick reply, you give me hope, this will be the first thing i try when i get home. I forgot to mention i also suffer from missing various keystrokes and what not. When i ran the disk utility to check the condition of the disk it locks up. When i repaired permissions multiple errors were shown that were not corrected.
Thanks again kappy! i will be back with a result

Cyclic network issue after recent update

This topic is covered in a recent post but thought I would highlight it in a separate post now that I know more about it.
Having installed the recent Udev update on a virgin Noodle system, my network (Internet via LAN and Cable using dhcp) goes through a cycle of working, then not working with each subsequent reboot.
My other Linux system (Frugalware) and Windows XP are not effected.
:cry: :cry:

Yes, this is an issue that was reported by several testers, but not fixed prior to release. The Engineers believe it has something to do with the Airport Extreme Base Station/Airport Time Capsule units. Some testers switch to non-Apple routers as an experiment and did not experience this issue. Maybe it will get fixed in 10.10.1.

My imessage is not Working after recent update

My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

Adobe Illustrator 17.1.0 crashes after recent update

Hi,
Adobe Illustrator 17.1.0 crashes after recent update. I can work some time (maybe half an hour or 10 minutes, or 1 hour) and then it crashes again.
Here is my error:
Process:         Adobe Illustrator [706]
Path:            /Applications/Adobe Illustrator CC/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:      com.adobe.illustrator
Version:         17.1.0 (17.0.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [145]
Responsible:     Adobe Illustrator [706]
User ID:         501
Date/Time:       2014-06-13 14:08:56.167 -0500
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 4C76A327-D836-AD35-DDEF-55FB707349CD
[long crash log removed... please only send a crash log to a technician, when asked]
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i5, 3.2 GHz, 16 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GT 755M, NVIDIA GeForce GT 755M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE SSD SD0128F, 121.33 GB
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: PTK-640
Thunderbolt Bus: iMac, Apple Inc., 23.10
Thank you in advance.
Best Regards,
Volha.

Some Mac links that may help
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

[solved] sudo and yaourt problems after recent updates

After recent updates (past week) yaourt started giving me problems. When using yaourt it prompts me for sudo password but it does not seem to use my sudo configuration.
I get this:
[sudo] password for root:
[sudo] password for root:
Password:
su: Authentication failure
Password:
When entering mine or root's password I just get prompt again. The last password is for su, which when I enter root's works.
It seems sudo is not using /etc/sudoers configuration either, as I have things like insults enabled and it used to work previously.
Any reason for this?
sudo works fine otherwise.
Last edited by wrm (2014-03-29 23:12:26)

Looks like this: https://github.com/archlinuxfr/yaourt/issues/5
And this: https://bbs.archlinux.org/viewtopic.php?id=178776
Last edited by 2ManyDogs (2014-03-24 21:33:40)

Apple TV2 can't find my network connection after recent update?

Why can't my Apple TV2 can't find my network connection after recent update?

I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.

HT3775 Quicktime no longer plays wmv files after recent update

after recent update, quicktime will not open wmv files. had no problem opening them up in the past. reinstalled flip4mac codec and nothing. don't want to use quicklime player 7 b/c need to use fast forward option that will not work with QT7. Any help is appreciated.
thank you,
Damian

I ended up on the phone with an Apple iPhoto expert after scheduling an appointment online (go to Apple support). He spent an hour or so diagnosing my particular problem and was able to fix it. I can once again view all my mov files in iPhoto. Since every computer is different, you might want to try that route. He was able to view my computer screen and direct me to do different things.

Premiere Pro Windows crashing after recent updates

Machine specs: HP Z820 - zeon e5-2690 48gb ram quadro k5000. Since the recent updates & complete wipe of the system & fresh install, Premiere pro CC crashes regularly without any pattern. Using MXF files while editing if that helps-i did read a thread about that - but it was old. This is a new problem. The event viewer information:
Faulting application name: Adobe Premiere Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c
Faulting module name: mc_dec_mp2v.dll_unloaded, version: 0.0.0.0, time stamp: 0x53f72b76
Exception code: 0xc0000005
Fault offset: 0x000007feea381a30
Faulting process id: 0x2168
Faulting application start time: 0x01cfe7cdce8c2c97
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: mc_dec_mp2v.dll
Report Id: ba9aeb2b-53c1-11e4-b3dd-24be05e2e6a2
Audition has also started crashing as well. Info:
Faulting application name: Adobe Audition CC.exe, version: 7.1.0.119, time stamp: 0x5421531b
Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098826e
Exception code: 0xc0000005
Fault offset: 0x000000000003c780
Faulting process id: 0x249c
Faulting application start time: 0x01cfe7ebfe3ea9e0
Faulting application path: C:\Program Files\Adobe\Adobe Audition CC 2014\Adobe Audition CC.exe
Faulting module path: C:\Windows\system32\MSVCR110.dll
Report Id: 4d975a0f-53e3-11e4-b3dd-24be05e2e6a2
Any Ideas?

Re:
Premiere Pro Windows crashing after recent updates
Try finding MSVCR110.dll file on internet and replace it in the path C:\Windows\system32\MSVCR110.dll
hopefully it works...

After recent update to Mountain Lion, trash won't empty completely; says "item" inuse

After recent update to Mountain Lion, trash will not empty completely. Always an item left in trash, and I get message that the "item is in use." Right now, using app Trash it! to get rid of that left behind item.

Try rebuilding Trash and see if that sorts it...
Launch Terminal and copy & paste these commands:
Go to /Applications /Utilities/Terminal and launch it.
At the prompt, copy and paste this command
sudo rm -rf ~/.Trash
Press Return.
You will be asked to enter your admin password. It will be invisible.
Enter it and press Return.
Log out and back in or restart.
Let us know.

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Does anyone know if apple is working on a solution to fix the wifi drama ( greyed/dimmed out)hundred of ppl have after recent updates?

After recent updates hundred of ppl can not connect to wifi anymore( incl myself)
Really annoying and all kinds of ideas how to fix it did not work out for me
I am out of warranty for 1mth and the apple shop did not even make a bit of afford to help
I am wondering if apple is working on a solution to fix this problem at all? Maybe with the next update?

I am aware of that !I just wonder if anyone has any news about this dramas-I actually hope someone says that apple is try to work on it!
No way they can leave all this ppl out there with this problem without doing anything about it

Keyboard issues after recent update

Similar Messages

Maybe you are looking for