Keyboard issues while installing Windows XP with Bootcamp

Hi there,
I am running bootcamp and when I am starting to install Windows XP I can't actually move into the setup because the keyboard won't work. Is there anyone who found a solution?
Thanks.

Same problem..........went back to the old keyboard and everything installed and worked fine in OS X and win-XP. swapping in the new alum keyboard the option key doesn't work during the boot select. once the machine boots to the default OS either mac or windows everything works in that OS.
Something I noticed: during the boot select.... the old keyboard gets power immediately, mouse lights up - keyboard cap-lock light is on. with the new alum keyboard the mouse and cap-lock light do not light until the default OS starts to boot with no boot select in between.
Looks like a boot camp setup doesn't know about the new keyboard even though it is recoginized by drivers in the two OS's. anyone know who to call for help at Apple?

Similar Messages

Mac gets blue screen while installing Windows 7 with bootcamp

I had a problem while trying to install Windows 7 Ultimate 64-bit on my MacBook mid-2010. When i would create the partition using bootcamp assistant and my computer restarted into the install process, i would get a blue screen. The blue screen would occur after my computer restarted and was completing the installation. If I try to reboot the machine, it gives me an error "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click ok to restart the computer, and then restart the installation." I first tried this on yosemite, but when it was not working I tried wiping the hard drive and i installed mavericks. I got the same problem, so it does not have to do with the OS. I have installed Windows 7 32-bit on this computer before. But i still get the same error with 32-bit also. I know that this computer supports windows 7 and 64-bit too. If anyone know why this might be happening and how i can fix it, please let me know. Thank you.

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

My iMac loses connection to the keyboard/mouse while installing Windows 7 on Bootcamp

I have used bootcamp assistant to install windows 7 on my brand new iMac. I used a flash stick to install the Windows OS.
When I rebooted the system, the iMac gave me an error message that it couldn't find a bootable disk and it asked for a bootable disk to be connected and to press any key. I did press a key, but it did not respond. I found later that both my usb keyboard and usb mouse don't have power.
I manually restarted and used pressed the option key to select the flash stick as my bootable device. It loaded and started to boot and load windows to the point it presented me with a screen to select the language etc. They key board and mouse seesed to work. I couldnt type nor move the mouse.
I tried again using the Bluetooth keyboard and mouse but I got the same problem.
Is my iMac broken? Or did I do something wrong.
I have installed the latest version of mavericks and installed all the updates.
Please help.
Thanks.
Tareq

I called the local seller who sold me the iMac regarding this problem. He confirmed that they had many problems with the latest iMac (Late 2013) Windows 7 installation and recommended that I install Windows 8 instead.
I am not excited about Windows 8 as I need to buy a new license and get used to a new interface.
I downloaded a fresh copy of Windows 8 (without a license of course) just to test that. I repeated the who process. I am glad to report that I was able to get past the first screen to select language and local setting and was able to use the mouse and keyboard. I stopped on the second screen where it prompted me to enter the license number.
My concern is that I go and buy a Windows 8 license to find that it will not install as well. Any suggestions?
Why Can't I install Windows 7 on this iMac (latest 2013)? Has anyone else face the same problem? is there any solution?
Any ideas?
Tareg

Black Screen while installing Windows 7 with BootCamp

Hello all,
I try to install windows 7 by using Boot Camp but when I restart my computer for Win7 Reboot, there is black screen with no activity. I waited maybe 20 minutes but no any process. Even I could not see the Win7 boot animation. Only black screen. Could you help me ?
Thanks in advance

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
Also Time Machine does not back up a boot camp partition.

Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive

I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...

BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know!

Installing Window 7 with bootcamp

Hi
I installed windows 7 with bootcamp and it worked.
Later I removed windows 7 with bootcamp and it also worked.
Now I'm reinstalling windows with bootcamp and I'm not able to create a partition that I can use for Windows. Bootcamp creates a partition I formatted it to NTFS.
But when I am installing windows it prompts: can't create partition.
Please help

Be aware that EFI boot has issues with Graphics and Audio on Windows 7, but not on Windows 8+.
If you are using EFI boot, create a Free Space partition and let it be split by the Installer, into MSR and MSD. On Mac models which are considered preUEFI models, it may not work properly. Check your Model Identifier (System Report -> Hardware) against this list. preUEFI models do not understand the MSR data partition and will return Boot Device not found.

Installing windows 8 with bootcamp 5. Have to make a choice at personalize but mouse is not working. What can I do?

installing windows 8 with bootcamp 5. Have to make a choice at personalize but mouse is not working. What can I do?

I solved my problem by using a USB mouse and a USB keyboard instead of bluetooth

Installing Windows 7 with Bootcamp question

Hey guys, I recently switched over from a PC to a Mac this year and wanted to install Windows 7 with Bootcamp so I could do some gaming every once and a while. I've read that I can't use the restore discs that I got with my ASUS to install Vista, so that's out of the question. I also have a Windows 7 upgrade disc that I used a while back to install Windows 7 on the ASUS. Will that upgrade disc work if the ASUS is restored? If not, will an OEM copy of Windows 7 be all I need? A retail copy of Windows 7 Home Edition is kind of steep to only be used part of the time.
Thanks in advance!

Well, "WHICH" Mac do you have?
Go to the Apple menu (upper left corner)/About This Mac/More Info and at the top (under Hardware content) it should say "Model name" and "Identifier". Then put it in your profile so you don't have to keep remembering to do it.:)
You might call/e-mail ASUS and ask if it can be used on another computer. Don't tell them it will be used on a Mac. Just tell them your thinking on building one from scratch.
If you have a "desktop" ASUS then you MIGHT be able to just switch over the HD after Upgrading it to 7, but I believe the ASUS, Dell, etc, setups are "matched" to the COMPUTER so it might not work. A retail full version of Window 7 will work. You might also try Microsoft and tell them the same thing, might be able to get another "Upgrade"?
I'm in the same boat, just play a few games on XP but want to get Windows 7, you have to spend $100 dollars more for "Pro" to get the "Windows XP Mode"! E-Bay does have it quite a bit cheaper then Microsoft sells it for.

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

Hi, can I install windows XP with bootcamp on my iMac which is now on Maverick? Please help.

Hello all, can I install windows XP with bootcamp on my iMac which is now on Maverick? Please advise. Thank you.

Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

HT201456 After installing windows 7 with bootcamp, am I able to remove the flash drive?

After installing windows 7 with bootcamp, am I able to remove the flash drive?

Yes, if you have installed the driver package.

Can i install windows 7 with bootcamp on imac with flash storage

can i install windows 7 with bootcamp on imac with flash storage

Yes, you can. The type of storage on which you install is not relevant, as long as it is connected to an 'internal' storage control. Windows licensing restricts its installation on external/portable disks. Windows-to-go is the only legal means to do that.

HT5639 can i install windows xp with bootcamp

can i install windows xp with bootcamp? Which version bootcamp should I go for?

Depending on which Mac mini you have and your OS X version, you can install Windows XP or not in Boot Camp.
First, open  > About this Mac, and tell me what OS X version you have. If it's 10.7 or 10.8, you can't install Windows XP. Also, if you have a Mid 2011 or newer Mac mini, you can't install it too. In this case, you have to use Parallels, VMware Fusion or VirtualBox, and install Windows XP on a virtual machine.
If you have 10.5 or 10.6, you can install Windows XP in Boot Camp. Have a look at this website to see which Boot Camp version you need > http://support.apple.com/kb/HT5634

Overheating while using Windows XP with Bootcamp

Hi,
I bought a MacBook Pro last September 2009. The MacBook Pro came with Leopard but I installed Snow Leopard a couple of weeks later.
I need to use some Windows-based programs so I am using Windows XP with Bootcamp. However, I notice a high overheating when using Windows on Bootcamp (especially on the left side of the keyboard). Until now, the system doesn't crash but the overheating is a big problem for typing. This problem does not appear while I work on Snow Leopard.
Please, I would appreciate any help. I installed "SMCFanControl" but it only works under OS X (where there is not the problem). It doesn't control the fan on Windows under Bootcamp. Also, for this, I installed "SpeedFan" but it doesn't recognize the fans.
Thanks in advance.

A little solution that has helped me.
install both
Notebook Hardware Control (NHC)
http://www.pbus-167.com/nhc/nhc.htm#anchor_download
Notebook Hardware Control has a Max Battery setting when you right click on it's icon in the notification section on the task bar (lower right). Make sure to apply this setting.
and as suggested by Kappy
Input Remapper
http://www.softpedia.com/get/System/OS-Enhancements/Input-Remapper.shtml
This program allows you to adjust your fan speed without having to restart from Mac OS. Which is nice because with SMC if you close your macbook while running XP it will turn the fans off. Therefore you have to restart in Mac OS to turn the fan speeds back up.
The combination of the two has kept my cpu in the 65c range while heavy gaming and 45c at idle.
I have tried a lot of the ridiculous things that have been mentioned in both this thread and others. This solution has been an incredible relief because I certainly didn't want to get up every so often to run to the freezer or play over the air conditioner for several hours. I hope you have as much luck as I did.
My Mac is a late 2009 Macbook pro and I'm running XP in bootcamp.
Message was edited by: ensigne

Keyboard issues while installing Windows XP with Bootcamp

Similar Messages

Maybe you are looking for