Keyboard just stuck in the screen whether you are writing or not..!
Some times in the massaging app keyboard just stuck in the screen whether you are writing or not (using it or not); why it does not have the option of dropping the keyboard down when you don’t use it; will give more room to read previous massages..!
“Whats App” have this option for god sake..
http://www.apple.com/feedback/
Similar Messages
-
My iTouch will not restore becuase for some reason it won't reconize it. I merely tried to update it with the newest software and every thing went to sh--. Now it is just stuck on the screen showing the apple sign. Can anyone help me.
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
JavaScript required. The browser that you are using does not support JavaSc
I keep on getting this message when I'm trying to log on to Hotmail
JavaScript required. The browser that you are using does not support JavaScript, or you may have disabled JavaScript
And my browser (IE 6) cannot go to any java links. They either don't load or they are blank pages. I tried installing java, enabling them on the internet options, and even installed a new browser it is still the same thing!!!
I'm very pissed right now but I really really need some help. Sorry for the inconvenience.
Thank you, ZaragonJavaScript is different from Java. Somehow, security has gotten turn on in IE. If you go to tools, internet options, security, then look at Internet (for hotmail anyway), hit the custom level button, you will see that scripting has been disabled.
-
Hello,
I am trying to add a book to ADE. I have previously read it on an Android device using an app called Aldiko. Now when I try to open it up on my account I am getting the message "the vendor account you are entering is not associated with the item you are trying to open". Please helpThis is the Adobe Reader forum; please ask in the Digital Editions forum.
-
The screen where you should select the apps you want to share is greyed out. It won't et me drag them either. Any thoughts?
Thanks!Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe -
What causes a "black curtain" to drop down the screen, and you are told to shut down and restart?
I have an '06 IMac. It has: Mac OS X 10.6.8 installed now
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version (system): 1.10f3
Serial Number (system): QP******VGP
Hardware UUID: 00000000-0000-1000-8000-0017F2D9A5BC
< Personal Information Edited By Host >•Technical Note TN2063: Understanding and Debugging Kernel Panics
https://developer.apple.com/library/mac/technotes/tn2063/_index.html
•Resolving Kernel Panics - General info:
http://www.thexlab.com/faqs/kernelpanics.html
•OS X: When your computer spontaneously restarts or displays
"Your computer restarted because of a problem." - Apple Support
As previously noted, this link shows examples & info on Kernel Panic:
•OS X: About kernel panics - Apple Support
There can be hardware, and software causes of a kernel panic;
incompatible software, faulty hardware, and other details...
See first link above for an in-depth cross-section of this issue.
Good luck & happy computing! -
So I was trying to update my 4th gen iPod touch when it canceled the update and told me that I needed to update iTunes. So while I was trying to do so, which didn't even work by the way, I noticed that my iPod was stuck on the screen that you get when updating your iOS. The bar was about a quarter way filled when it froze. I'm not sure how to fix this or what to google to find a solution so I came here. I'm actually leaving it alone to try to see if it runs out of battery since after all it has to be wasting battery from being on all the time. Please help!
- LukeHey rdbreunig,
Thanks for the question. If you issue is not yet resolved, it may be necessary to restore your iPod touch in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
HT203175 ipod is stuck on the screen saying to plug in itunes
ipod is stuck on the screen to plug into itunes
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
HT1338 i cant get in to os system. the screen just stuck in white screen and apple logo
i can not get in to my os system. the screen just stuck in white screen and apple logo
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
My ipod touch is stuck on a white screen and i did everything hold the home botton and sleep botton togher, but it wont respnd it is just stuck on the white flash scree HELP PLEASE!
- Let the battery fully drain. The charge for an hour and see what happens, Try resetting too:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connct to computer and restore if it shows in iTunes.
- You can try placing the iPod in recovery mode and then trying to restore. See:
iPhone and iPod touch: Unable to update or restore
- Also see:
iPod touch: Hardware troubleshooting
Frequenly the white scree is due to a hardware problem. -
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes.
And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter how many times I try, recovery mode will not work. My phone is currently useless unless I can figure this out.No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
When I have turned on my MacBook Pro it just sits there at the intial apple screen and doesnt proceed to the screen where you can sign on - any ideas
when you restart the machine, make sure you uncheck the "reopen windows" check box, and see if that helps.
-
I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.
The Firefox icon is the default feature for Windows Vista and 7 only, it does not apply to Windows XP users.
To have the Firefox icon instead of the Menu Bar:
View > Toolbars and UNCHECK the Menu Bar.
After that, click on the Firefox icon and you'll have the Menu Bar appear again.
http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing -
I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.
Maybe you are looking for
-
I'm looking for a bluetooth speaker to use with the ipad ... Suggestions???
I'm considering the altec a2dp (if i'm remembering the model correctly). I want something portable, but with good/decent sound ... Any opinions?? Thanks! I'm not looking for a headset, but for a portable speaker.
-
If you do a search on the word "Microsoft" in the store, you will find several apps that are mostly purchased by people who confuse them with actual Microsoft products. For example, we have "Microsoft(R) Word(R) 2010 -- mastering in 24h(TM)." The r
-
When i charge or plug it in my mac, the apple logo just blinks every 5 seconds. I've tried restarting it to no avail, what should i do?
-
IPhoto 11 keeps crashing when importing. I need a fix. Can anyone help?
I have an older mac that is running Lion. I had to upgrade my memory to run Lion. I am now running 4gb of memory. I have my iPhoto library on an external hard drive. When I go to import photos whether from a camera, iPad, iPod Touch, it shuts down
-
Clicking and stuttering audio on my HP Pavilion Dv7 Notebook
My OS is Windows 7. The audio when Iisten to a DVD or internet radio stutters. I also sometimes hear a clicking sound even when I'm not playing a disc or radio. The problem seems to be only with my speakers--no stuttering or clicks when I have hea