Keyboard layout problem at the login screen

Hi there!
I'm having a huge problem at the login screen just after installing OS X Lion 10.7. It seems like the keyboard layout has changed, and I need to enter some numbers in my password. I can't find the digit 9, and I really don't know if the other numbers are in the right place either. Maybe it's changed to a us layout.. What to do?

stoneheart,
the numbers are in the same position on a US English keyboard as they are on a Norwegian keyboard.
If you select the Users & Groups pane of System Preferences, and select its Login Options, do you have the “Show Input menu in login window” checkbox checked? (That’s where the checkbox’s location is in Mavericks; I don’t have Lion, so I don’t know if it’s in the same location there.)

Similar Messages

  • Keyboard locked at the login screen

    Hey all,
    i have a problem with my macbook pro (late 2010), since updated from Maverick to Yosemite 10.10 and few days later to 10.10.1
    i while using "normally" surfing, emailing has crashed my MAIL and few moments later the SAFARI. Thinking a restart always can
    help i did it. But after the restart at the login screen the keyboard is (b)locked (i can moving the mouse cursor) but i can't type in any
    in the password field. (by the way, i can't not open the screen keyboard)
    If i go to the guest account, there i haven't password (because never used this account) there is working the keyboard. But i haven't
    any rights to change something at the system. Please, anyone can help me, and sorry for my bad english. Any solution without lost
    all my documents.
    Thank you very much.
    Daniel

    Then you are not at the initial login screen - you are waking up the mac from having put the computer or display to sleep due to inactivity.
    You are already logged in. are you certain you're entering the correct password?
    Do you have another computer on the same network that you could try and login to your Mac via "ssh" from this other computer. If you do, login from the other computer in a terminal type window and "ssh username@IP_Address_of_Mac" and see if that helps (substitute username and ip address of the mac for the user and IP address of the mac). You can then do a "sudo restart" and try the safe boot and reboot. This assumes you had "Remote Logins" enabled in the Sharing System Preferences though so it may not work depending on how that is set now.
    So you don't see any dots appear in the password field as you type - do you? Are you sure the Caps-Lock key is not active (your password is case sensitive so if the CapsLock is on accidentally then you will never be able to login this way until you turn it off). If the CapsLock LED is not working you have no way of knowing if it's on or off, so if one attempt at loggging in does not work (and you see dots appear in the password field as you type) then press the CapsLock key once and try again.
    If you don't see any "dots" appear in the password box
    Good luck...
    ps - in any event you can always press and hold down the power button for about 5 seconds to force a shutdown but this can cause problems and not recommended except as a last resort.

  • I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating.  I can get to the login screen but my mouse will be frozen.  The only fix's is a hard reboot.  Any help would be great!

    I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating.  I can get to the login screen but my mouse will be frozen.  The only fix's is a hard reboot.  Any help would be great!

    Try resetting the SMC and the PRAM.
    1. SMC
    Read this and follow the instructions for your kind of mac:
    http://support.apple.com/kb/HT3964
    2. PRAM
    Follow the procedure below:
    1. Power down the machine.
    2. Locate the following keys on your keyboard in preparation for Step 4:
    command–option–P–R
    3. Press the ‘power on’ button.
    4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
    5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally.

  • Keyboard lighting at the login screen?

    Hi,
    I have a  mid 2011 MBA with 10.7.4. Lion used to have the feature where the keyboard light had its own setting for the login screen. This way I could set it so that the light was on at the login screen and went off right after logging in.
    After installing ML today it seems that this is not the case anymore. If I switch off the light in my account, the light is off also at the login screen. Is it supposed to be like that? I guess, there's no setting for this in ML?

    Could someone please test this? Resetting SMC and PRAM didn't change the situation.

  • I solve my problem of black screen when starting up my Mac pro, namely by the button lighting and then i saw the login screen. Hopefully it works for you too.

    I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.

    It was the PRAM.

  • Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

    Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

    It's either hand right or left.
    I have the same issue myself.  Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard.

  • My keyboard doesn't work from the login screen, but when I login as a guest user it works fine (minus the brightness buttons, playback buttons, etc.).

    I've already switched out the batteries and the keyboard works fine, so I fear it might be some sort of bug? All the methods of restarting or resetting certain settings can only be done from the login screen or from within an account, when the keyboard doesn't work, and the guest options are limited to non existent.

    Try doing a SMC reset, you may need to do this 2-3 times as sometimes the reset doesn't always "take" the first time. To do a SMC reset, shut down the computer, unplug the power cord from the wall and computer, wait 15-20 seconds and restart normally and test. If after 2-3 resets it still does not work test another keyboard. If that keyboard works then this indicates your keyboard has failed and needs to be replaced.

  • Macbook air built-in keyboard/trackpad only work at login screen

    The built-in keyboard and trackpad have become unresponsive on my 2013 refurbished macbook air. When I restart it, everything works normally at the login screen, but becomes unresponsive again once I've logged in. The computer works fine with external inputs or a shared screen.
    I've recently updated to yosemite. The fact that everything works up until login makes me think this is a software problem. I've tried all the troubleshooting steps listed here, and I've reset PRAM and SMC. Does anyone know what could be causing this?

    Hi,
    I was able to get result from apple store after 24 days not hours days. They said it's my fault and they have found liquid inside of it and when i asked to see pictures of it they asked for COURT ORDER and repair will be cost around 400$.
    I am %100 sure that my macbook air never touched with liquids.
    I was using it for business and not even fluids there isn't any one scratch on it. I have been very careful.
    Did they asked 400$ for you too ?
    I am also using mac mini and iphone 5s. I think i will never buy an apple again.
    And i will definetly go to court.
    Repair R146244431

  • Imac 2008 Snow Leopard installed, Wont go past the login screen

    Hello Everyone,
    I am new to this so please bear with me.
    I had been using my Imac lately just to run the sims 3 with extension packs which I played for about 10 minutes.
    Today we had our internet connected as we have moved to a new house.
    The Internet service provider has said the connection should be up and running today.
    I went onto safari and checked two or three emails after that my mouse and keyboard could not do anything.
    No force quit, No command based force quit, no relaunching of the finder, no being able to restart or shut it down at all.
    I remember an echo back up mac thingy jumping up and down too in the dock if that helps
    So I turned it off using the back button and left it off for 5 minutes. The mouse and Keyboard are wireless and run fine at the moment, no flat battery.
    First attempt
    The screen turned on right up until the galaxy looking screen before te login box, the login box did not appear. There was no other way to turn it off other than from the back again.
    Second attempt
    I had left it off for another 5 minutes and turned it back on again, The login screen has appeared, I can type in the password,
    but this time when I pushed enter, the rainbow wheel appears and has stayed on there for the past half an hour.
    Third attempt
    I will switch off the modem, leave the computer off for another 5 minutes and then try anf log back in. Since I will be disconnected to the internet I will update you with the progress and whether this has worked or not.
    This begun to happen as soon as I entered the password for the internet connection. This macbook (late 2008 not pro) detected the connection from the imac (another computer is trying to access your internet connection-sort of thing) and I pressed ok on the macbook. The model of the modem router is D-Link Wireless N300 ADSL2 Modem router if that helps.
    The mac desktop has had an install of snow leopard (so I can not do a restall/reinstall thingy of the current operating system) and all I can find at the moment is the original disks from the box. The mac was originally on 10.5.8.
    Please help me to fnd a way in which I can get back into my computer this would be much appreciated.
    I am not familliar with any technical terms so please keep it simple as I am a noob :3

    Third attempt
    I will switch off the modem, leave the computer off for another 5 minutes and then try anf log back in. Since I will be disconnected to the internet I will update you with the progress and whether this has worked or not.
    Update:
    This time I switched the computer off from the back as there seemed to be no progress made from the rainbow spinning wheel.
    I left it for 5 minutes (the computer) switched off the jack and pulled the plug out.
    I turned off the modem for 5 minutes.
    I turned on the computer without turning on the modem and was able to log in.
    I managed to get into the computer and am currently trying out safari to see if the same problem occurs.
    5 minutes into hotmail, trade sites and you tube it seems to be going OK.
    I guess the computer paicked abit from the new connection perhaps.

  • Is there a way to permanently change the input language in the login screen?

    Whenever I start my iMac with Mavericks, after the boot is complete and the login window appears, I have the change the language in the top right corner from US to DE, else I can't type in my password. Mavericks does not remember this setting, next time after startup I have to do it again. The original owner of this Mac was using US as input language, so I guess that's where it's coming from. This extra step of changign language only takes a few seconds, but many times I forget it and try to enter my password but it will not work. There must be a console command or somethign that can fix this? Thank you!

    I managed to find the solution myself. If anyone is interested, just follow those steps here:
    http://apple.stackexchange.com/questions/44913/make-a-custom-keyboard-layout-the -system-default-even-for-the-login-screen
    (terminal skills required tho)

  • I turned on filevault but after restarting i got stuck at the login screen.

    I turned on filevault but after restarting i got stuck at the login screen. my trackpad is working but not clicking. i tried random keys and finally got to enter my password via keyboard. now i am afraid of shutting my mac , what to do?

    There is a known problem and I am having exact same issue. Power cycling and internet cache does not fix the issue. When a connection to a server fails it has nothing to do with caching issues. It is a network issue on AT&Ts end in a localized region. It works in multiple towers in various locations but does not work where I am. I have reported this to AT&T.

  • When I boot up it hangs on the login screen for awhile, why?

    I have a mid 2011 Macbook Air 13".  It came with Lion but I recently updated to Mountain Lion.  When I wake the laptop from sleep everything is fine.  If it's been awhile since it slept (a couple of hours), the login screen hangs.  What happens is that it boots like normal and looks like everything is correct, but it won't let me type in my password.  After 10 seconds or so I can see a cursor come up but it won't let me type (but anything I do type at this point will later fill in the field after another 2-3 seconds or so).  One other thing that's weird is that when the screen first comes up it shows the battery percentage from when I put it back on the charger, then after everything catches up, it changes to show 100%.
    I hope I explained the problem well enough.  Basicly a "wake from sleep" is fine if it hasn't been long since the laptop slept, but if it's been awhile it takes about 15-20 seconds to boot up.
    Ideas?

    Here are some suggestions based on my recent issue with unable to get Mavericks up after upgrade - The Apple geniuses just simply couldnt figure this one out...despite it being in their shop for 3 days (They probably did not look at it...and asked if they can just wipe out everything and install fresh...i had said NO):
    Restart computer and hold Cmd+V when you hear chime. This will start the computer in Verbose mode.
    See the messages and see where the system boot fails. In my case, it was some backtrace IOStorageFamily issue with com.paragon-software.
    Google may be able to solve your Apple issues - just type the error message in and see if you get any useful suggestions. in most cases - this would be some faulty 3rd party drivers.....
    In my case, it was something stupid i had probably installed....I had to boot to safe mode (Hold Shift at boot chime) - open Terminal, delete the folder com.paragon-software.kext from System/Library/Extensions....that fixed the problem. Mavericks is working great now....
    Let me know if your debugging thing works...

  • My Mac starts up fine in safe mode, but freezes before the login screen in normal mode.

    I have the 2012 MBP, 4 GB of RAM, 500GB HD, 2.5GHz Intel i5 processor.  Everything worked fine, until one day it freezes all of a sudden.  I shut down and restarted.  The Apple logo appears with the loading animation underneath.  A few moments later, the animation disappears, and the mouse cursor appears.  This is normal.  What's not normal is that it stays on this screen forever.  I can't get to the login screen even after waiting sooo long.  Even restarting 5 times only repeats this problem.  I finally boot into safe mode.  I am able to login and get to the desktop in safe mode, but not normal mode.  Clearing every startup item in System Prefs, and in the startupitems folders does not solve the problem.  Disk utility says no problems.  Resetting PRAM does nothing.  Can anyone please tell me what I should do next?

    Do you hear the startup chimes?
    If so, then the startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utillities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
    Make sure to back up all important files first before using OS X Recovery.
    OS X Recovery does require a broadband high speed internet connection.

  • I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

    I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

    Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
    The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
    Briefly, you need to delete the following file:
    /var/audit/current
    If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
    Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
    When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
    mount -uw /
    You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
    Next, type the following command:
    rm -i /var/audit/current
    Press return. You should get the following output:
    remove /var/audit/current?
    If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
    Finally, enter the command:
    exit
    Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
    Credit for this solution to ASC user AnthonyTW.

  • My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

    My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for