Keyboard & Mouse hp kg-0851 keyboard
The mouse is defective on this combo. Will the keyboard work independently if I purchase another mouse?
This question was solved.
View Solution.
Thank you very much for your answer.
Similar Messages
-
Volume control keys not functioning. PC model: s5268hk, with keyboard model: KG-0851
I am using a desktop slimline model: s5268hk, with keyboard model: KG-0851. I don't remember what program I installed that caused the trouble but anyway, right now- it is not functioning like the usual. I re-installed the driver from HP support yet nothing has changed. I appreciate any advice you can provide, thanks to everyone in advance!
You may have to go back to a known good system restore point.
Right mouse click on my Computer, select properties, then advanced system setting then restore. When you get to the restore window, check the box to show all available restore points and pick a date where your know when your PC worked correctly.
If you are using a Norton AV product then turn off "tamper protection" before you attempt a restore or it will fail.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Mid 2010 no USB Mouse or keyboard power? HELP!!
I bought a mid 2010 Mac Pro 2.8ghz Nahalem from the apple store over 1 month ago. After two weeks I had a five minute issue where after I rebooted, the mouse & keyboard would not respond. One quick reboot, the mouse and keyboard had power. Now I have a TV show I have to get to the station for tomorrow and I"m having this issue again and I've rebooted five times with no luck. I"m desperate here and I need to get this working. I did buy some new RAM from the Apple store, 4GB DDR3 PC3 240 pin 512MX72-8500 ECC. I put it in with the other three 1 gig sticks for 7gigs of RAM. Rebooted, no keyboard or mouse power. shut down, re-arranged the sticks in various configurations and even went back to just the three 1 gig sticks and again, the computer will boot up, get to the login window, but no power to the keyboard or my wireless mouse or should I say not responding and no caps lock light at all. Can I not have this RAM configuration and it blew something out? The bluetooth mouse battery was changed and I checked my keyboard which has a wired connection. It is fine. I even moved it to other USB slots. No go. Has anyone experienced this? Is there a PMU reset switch on these new mac models? I've been editing forever on a dual 1.6gh PowerMac with no problems. Rock solid. Now I'm on this Nahalem and this no keyboard or wireless mouse communication is killing me with this deadline. I NEED HELP!!!
After installing Windows 7 did you also install the Chipset Driver, Intel ME Driver, Keyboard and Mouse Driver and the USB 3 Driver? If you didn't then that would account for the various hardware items not being recognized. Always install the Intel Drivers first and then the rest.
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/leno...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance. -
Problem with xfce and/or mouse and keyboard
Hi!
Two days ago I've turned on my laptop with Arch and the display manager Slim has frozen immediately. Later on Single-User mode I've uninstalled it. Now in normal mode when I type "startxfce4" everything is showing up, but the mouse and keyboard don't work. I know it's not frozen, because animation of mouse and CPU Frequency Monitor is on.
Strange fact is that laptop is not connecting with the Internet, so now I don't know where the problem is.
It's happening when I start xfce both from user and super user.
Just before those troubles I've updated everything with "pacman -Syu", but I haven't seen anything strange. Also the computer could have been roughly turned off (by unplugging power supply), when was turning on.
Thanks,
GabaSorry for not replying, but I didn't have access to my laptop by this time.
On grub I have only normal mode and 'fallback' mode, so I have result from 'journalctl' from normal mode.
I'm sending the fragment of this file where you can see everything after I typed 'startxfce4' in console:
http://codepad.org/8pYIj8qC
I see that something is wrong, but after some attempts I don't know how to fix this ^^
Edit:
Oh, I forgot to write, that I've tried activate some drivers from 'lspci -k' (there were no "Kernel driver in use:..." in almost every device), but it didn't fi anything.
Last edited by gargoyle (2015-03-15 23:20:18) -
[solved] Xorg 1.8.1 + FGLRX Mouse and keyboard don't work...
Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04)Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04) -
Xorg 1.8 upgrade and no keyboard/mouse [solved]
Well I took the plunge and did a Suy for the 1st time in 6 months or so today... all went well but I have no keyboard or mouse. I have read all the info on the modular configs and opted to stick with my original xorg.conf. Below are my xorg.conf and an Xorg.0.log. Any help is appreciated.
J
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
#Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/mouse0"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 62.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Modeline "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Device"
# Driver "vesa"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 32
Modes "1680x1050"
EndSubSection
EndSection
#Option "PixmapCacheSize" "100000000"
#Option "allowSHMPPixmaps" "0"
[ 180.386]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 180.386]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 180.387] X Protocol Version 11, Revision 0
[ 180.387] Build Operating System: Linux 2.6.34-ARCH i686
[ 180.387] Current Operating System: Linux grayza.home.digitalgoat.com 2.6.30.4 #11 SMP Sat Jul 3 17:37:39 EDT 2010 i686
[ 180.387] Kernel command line: root=/dev/sda2
[ 180.387] Build Date: 21 June 2010 11:54:27AM
[ 180.387]
[ 180.388] Current version of pixman: 0.18.2
[ 180.388] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 180.388] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 180.388] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 5 15:59:36 2010
[ 180.436] (==) Using config file: "/etc/X11/xorg.conf"
[ 180.436] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 180.451] (==) ServerLayout "Xorg Configured"
[ 180.451] (**) |-->Screen "Screen0" (0)
[ 180.451] (**) | |-->Monitor "Monitor0"
[ 180.451] (**) | |-->Device "Card0"
[ 180.451] (**) |-->Input Device "Keyboard0"
[ 180.451] (**) |-->Input Device "USB Mouse"
[ 180.451] (**) Option "AllowMouseOpenFail" "true"
[ 180.451] (==) Automatically adding devices
[ 180.451] (==) Automatically enabling devices
[ 180.532] (WW) The directory "/usr/share/fonts/PEX" does not exist.
[ 180.532] Entry deleted from font path.
[ 180.532] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
[ 180.532] Entry deleted from font path.
[ 180.532] (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
[ 180.559] (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.559] (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.559] (WW) The directory "/usr/share/fonts/truetype" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.559] (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.559] (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.559] (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.559] (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.559] (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
[ 180.559] Entry deleted from font path.
[ 180.562] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 180.562] Entry deleted from font path.
[ 180.562] (**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 180.562] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 180.562] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 180.562] (WW) Disabling Keyboard0
[ 180.562] (WW) Disabling USB Mouse
[ 180.562] (II) Loader magic: 0x81e9d00
[ 180.562] (II) Module ABI versions:
[ 180.562] X.Org ANSI C Emulation: 0.4
[ 180.562] X.Org Video Driver: 7.0
[ 180.562] X.Org XInput driver : 9.0
[ 180.562] X.Org Server Extension : 3.0
[ 180.568] (--) PCI:*(0:1:0:0) 10de:01d1:1462:0274 nVidia Corporation G72 [GeForce 7300 LE] rev 161, Mem @ 0xf7000000/16777216, 0xd0000000/268435456, 0xf8000000/16777216, BIOS @ 0x????????/131072
[ 180.574] (--) PCI: (0:4:1:0) 14f1:8800:1461:c111 Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder rev 5, Mem @ 0xfc000000/16777216
[ 180.574] (II) Open ACPI successful (/var/run/acpid.socket)
[ 180.574] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 180.574] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 180.575] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 180.575] (II) "record" will be loaded by default.
[ 180.575] (II) "dri" will be loaded by default.
[ 180.575] (II) "dri2" will be loaded by default.
[ 180.575] (II) LoadModule: "ddc"
[ 180.575] (II) Module "ddc" already built-in
[ 180.575] (II) LoadModule: "dbe"
[ 180.624] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 180.628] (II) Module dbe: vendor="X.Org Foundation"
[ 180.628] compiled for 1.8.1.902, module version = 1.0.0
[ 180.628] Module class: X.Org Server Extension
[ 180.628] ABI class: X.Org Server Extension, version 3.0
[ 180.628] (II) Loading extension DOUBLE-BUFFER
[ 180.628] (II) LoadModule: "extmod"
[ 180.629] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 180.636] (II) Module extmod: vendor="X.Org Foundation"
[ 180.636] compiled for 1.8.1.902, module version = 1.0.0
[ 180.636] Module class: X.Org Server Extension
[ 180.636] ABI class: X.Org Server Extension, version 3.0
[ 180.636] (II) Loading extension MIT-SCREEN-SAVER
[ 180.636] (II) Loading extension XFree86-VidModeExtension
[ 180.636] (II) Loading extension XFree86-DGA
[ 180.636] (II) Loading extension DPMS
[ 180.636] (II) Loading extension XVideo
[ 180.636] (II) Loading extension XVideo-MotionCompensation
[ 180.636] (II) Loading extension X-Resource
[ 180.636] (II) LoadModule: "glx"
[ 180.636] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 180.638] (II) Module glx: vendor="X.Org Foundation"
[ 180.638] compiled for 1.8.1.902, module version = 1.0.0
[ 180.638] ABI class: X.Org Server Extension, version 3.0
[ 180.639] (==) AIGLX enabled
[ 180.639] (II) Loading extension GLX
[ 180.639] (II) LoadModule: "record"
[ 180.639] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 180.646] (II) Module record: vendor="X.Org Foundation"
[ 180.646] compiled for 1.8.1.902, module version = 1.13.0
[ 180.646] Module class: X.Org Server Extension
[ 180.646] ABI class: X.Org Server Extension, version 3.0
[ 180.646] (II) Loading extension RECORD
[ 180.646] (II) LoadModule: "dri"
[ 180.646] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 180.664] (II) Module dri: vendor="X.Org Foundation"
[ 180.664] compiled for 1.8.1.902, module version = 1.0.0
[ 180.664] ABI class: X.Org Server Extension, version 3.0
[ 180.664] (II) Loading extension XFree86-DRI
[ 180.664] (II) LoadModule: "dri2"
[ 180.664] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 180.664] (II) Module dri2: vendor="X.Org Foundation"
[ 180.664] compiled for 1.8.1.902, module version = 1.2.0
[ 180.664] ABI class: X.Org Server Extension, version 3.0
[ 180.664] (II) Loading extension DRI2
[ 180.664] (II) LoadModule: "nvidia"
[ 180.664] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 180.810] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 180.810] compiled for 4.0.2, module version = 1.0.0
[ 180.810] Module class: X.Org Video Driver
[ 180.852] (II) NVIDIA dlloader X Driver 195.36.24 Thu Apr 22 09:34:29 PDT 2010
[ 180.855] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 180.855] (--) using VT number 7
[ 180.858] (II) Primary Device is: PCI 01@00:00:0
[ 180.859] (II) Loading sub module "fb"
[ 180.859] (II) LoadModule: "fb"
[ 180.915] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 180.944] (II) Module fb: vendor="X.Org Foundation"
[ 180.944] compiled for 1.8.1.902, module version = 1.0.0
[ 180.944] ABI class: X.Org ANSI C Emulation, version 0.4
[ 180.944] (II) Loading sub module "wfb"
[ 180.944] (II) LoadModule: "wfb"
[ 180.944] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 180.952] (II) Module wfb: vendor="X.Org Foundation"
[ 180.952] compiled for 1.8.1.902, module version = 1.0.0
[ 180.952] ABI class: X.Org ANSI C Emulation, version 0.4
[ 180.952] (II) Loading sub module "ramdac"
[ 180.952] (II) LoadModule: "ramdac"
[ 180.952] (II) Module "ramdac" already built-in
[ 181.026] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 181.026] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 181.026] (==) NVIDIA(0): RGB weight 888
[ 181.026] (==) NVIDIA(0): Default visual is TrueColor
[ 181.026] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 181.026] (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
[ 181.026] (**) NVIDIA(0): Option "PixmapCacheSize" "300000"
[ 181.026] (**) NVIDIA(0): Enabling RENDER acceleration
[ 181.027] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 181.027] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 181.027] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 181.027] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 181.027] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 182.011] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 182.013] (II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:1:0:0 (GPU-0)
[ 182.013] (--) NVIDIA(0): Memory: 524288 kBytes
[ 182.013] (--) NVIDIA(0): VideoBIOS: 05.72.22.43.32
[ 182.013] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 182.013] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 182.013] (--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:1:0:0:
[ 182.013] (--) NVIDIA(0): CRT-0
[ 182.013] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 182.014] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 182.014] (II) NVIDIA(0): Validated modes:
[ 182.014] (II) NVIDIA(0): "1680x1050"
[ 182.014] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 182.014] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 182.014] (WW) NVIDIA(0): from CRT-0's EDID.
[ 182.014] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 182.018] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 182.018] (--) Depth 24 pixmap format is 32 bpp
[ 182.023] (II) NVIDIA(0): Initialized GPU GART.
[ 182.027] (II) NVIDIA(0): Setting mode "1680x1050"
[ 182.114] (II) Loading extension NV-GLX
[ 182.149] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 182.166] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 182.166] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 182.168] (==) NVIDIA(0): Backing store disabled
[ 182.168] (==) NVIDIA(0): Silken mouse enabled
[ 182.178] (**) NVIDIA(0): DPMS enabled
[ 182.178] (II) Loading extension NV-CONTROL
[ 182.179] (II) Loading extension XINERAMA
[ 182.179] (II) Loading sub module "dri2"
[ 182.179] (II) LoadModule: "dri2"
[ 182.179] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 182.179] (II) NVIDIA(0): [DRI2] Setup complete
[ 182.179] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 182.179] (==) RandR enabled
[ 182.179] (II) Initializing built-in extension Generic Event Extension
[ 182.179] (II) Initializing built-in extension SHAPE
[ 182.179] (II) Initializing built-in extension MIT-SHM
[ 182.179] (II) Initializing built-in extension XInputExtension
[ 182.179] (II) Initializing built-in extension XTEST
[ 182.179] (II) Initializing built-in extension BIG-REQUESTS
[ 182.179] (II) Initializing built-in extension SYNC
[ 182.179] (II) Initializing built-in extension XKEYBOARD
[ 182.179] (II) Initializing built-in extension XC-MISC
[ 182.179] (II) Initializing built-in extension SECURITY
[ 182.179] (II) Initializing built-in extension XINERAMA
[ 182.179] (II) Initializing built-in extension XFIXES
[ 182.179] (II) Initializing built-in extension RENDER
[ 182.179] (II) Initializing built-in extension RANDR
[ 182.179] (II) Initializing built-in extension COMPOSITE
[ 182.179] (II) Initializing built-in extension DAMAGE
[ 182.188] (II) AIGLX: Screen 0 is not DRI2 capable
[ 182.188] (II) AIGLX: Screen 0 is not DRI capable
[ 182.233] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 182.233] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 182.912] (II) config/udev: Adding input device Power Button (/dev/event0)
[ 182.913] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 182.913] (II) No input driver/identifier specified (ignoring)
[ 182.913] (II) config/udev: Adding input device Power Button (/dev/event1)
[ 182.913] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 182.913] (II) No input driver/identifier specified (ignoring)
[ 182.914] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/event3)
[ 182.914] (II) No input driver/identifier specified (ignoring)
[ 182.915] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/mouse0)
[ 182.915] (II) No input driver/identifier specified (ignoring)
[ 182.918] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/event2)
[ 182.918] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 182.918] (II) No input driver/identifier specified (ignoring)
Last edited by jayray (2010-07-05 22:13:09)So I have whittled it down to the following and still have the same results:
BTW thank you for the quick response!
J
xorg.conf
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 62.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Modeline "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Device"
# Driver "vesa"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 32
Modes "1680x1050"
EndSubSection
EndSection
Xorg.0.log
[ 2056.665]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 2056.665]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 2056.665] X Protocol Version 11, Revision 0
[ 2056.665] Build Operating System: Linux 2.6.34-ARCH i686
[ 2056.665] Current Operating System: Linux grayza.home.digitalgoat.com 2.6.30.4 #11 SMP Sat Jul 3 17:37:39 EDT 2010 i686
[ 2056.665] Kernel command line: root=/dev/sda2
[ 2056.665] Build Date: 21 June 2010 11:54:27AM
[ 2056.665]
[ 2056.665] Current version of pixman: 0.18.2
[ 2056.665] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2056.665] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2056.665] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 5 16:30:53 2010
[ 2056.665] (==) Using config file: "/etc/X11/xorg.conf"
[ 2056.665] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2056.666] (==) No Layout section. Using the first Screen section.
[ 2056.666] (**) |-->Screen "Screen0" (0)
[ 2056.666] (**) | |-->Monitor "Monitor0"
[ 2056.666] (**) | |-->Device "Card0"
[ 2056.666] (==) Automatically adding devices
[ 2056.666] (==) Automatically enabling devices
[ 2056.666] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2056.666] Entry deleted from font path.
[ 2056.666] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2056.666] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2056.666] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2056.666] (II) Loader magic: 0x81e9d00
[ 2056.666] (II) Module ABI versions:
[ 2056.666] X.Org ANSI C Emulation: 0.4
[ 2056.666] X.Org Video Driver: 7.0
[ 2056.666] X.Org XInput driver : 9.0
[ 2056.666] X.Org Server Extension : 3.0
[ 2056.672] (--) PCI:*(0:1:0:0) 10de:01d1:1462:0274 nVidia Corporation G72 [GeForce 7300 LE] rev 161, Mem @ 0xf7000000/16777216, 0xd0000000/268435456, 0xf8000000/16777216, BIOS @ 0x????????/131072
[ 2056.678] (--) PCI: (0:4:1:0) 14f1:8800:1461:c111 Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder rev 5, Mem @ 0xfc000000/16777216
[ 2056.679] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2056.679] (II) LoadModule: "extmod"
[ 2056.679] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2056.679] (II) Module extmod: vendor="X.Org Foundation"
[ 2056.679] compiled for 1.8.1.902, module version = 1.0.0
[ 2056.679] Module class: X.Org Server Extension
[ 2056.679] ABI class: X.Org Server Extension, version 3.0
[ 2056.679] (II) Loading extension MIT-SCREEN-SAVER
[ 2056.679] (II) Loading extension XFree86-VidModeExtension
[ 2056.679] (II) Loading extension XFree86-DGA
[ 2056.679] (II) Loading extension DPMS
[ 2056.679] (II) Loading extension XVideo
[ 2056.679] (II) Loading extension XVideo-MotionCompensation
[ 2056.679] (II) Loading extension X-Resource
[ 2056.679] (II) LoadModule: "dbe"
[ 2056.679] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2056.679] (II) Module dbe: vendor="X.Org Foundation"
[ 2056.679] compiled for 1.8.1.902, module version = 1.0.0
[ 2056.679] Module class: X.Org Server Extension
[ 2056.679] ABI class: X.Org Server Extension, version 3.0
[ 2056.679] (II) Loading extension DOUBLE-BUFFER
[ 2056.679] (II) LoadModule: "glx"
[ 2056.679] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2056.679] (II) Module glx: vendor="X.Org Foundation"
[ 2056.679] compiled for 1.8.1.902, module version = 1.0.0
[ 2056.679] ABI class: X.Org Server Extension, version 3.0
[ 2056.679] (==) AIGLX enabled
[ 2056.679] (II) Loading extension GLX
[ 2056.679] (II) LoadModule: "record"
[ 2056.680] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2056.680] (II) Module record: vendor="X.Org Foundation"
[ 2056.680] compiled for 1.8.1.902, module version = 1.13.0
[ 2056.680] Module class: X.Org Server Extension
[ 2056.680] ABI class: X.Org Server Extension, version 3.0
[ 2056.680] (II) Loading extension RECORD
[ 2056.680] (II) LoadModule: "dri"
[ 2056.680] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2056.680] (II) Module dri: vendor="X.Org Foundation"
[ 2056.680] compiled for 1.8.1.902, module version = 1.0.0
[ 2056.680] ABI class: X.Org Server Extension, version 3.0
[ 2056.680] (II) Loading extension XFree86-DRI
[ 2056.680] (II) LoadModule: "dri2"
[ 2056.680] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2056.680] (II) Module dri2: vendor="X.Org Foundation"
[ 2056.680] compiled for 1.8.1.902, module version = 1.2.0
[ 2056.680] ABI class: X.Org Server Extension, version 3.0
[ 2056.680] (II) Loading extension DRI2
[ 2056.680] (II) LoadModule: "nvidia"
[ 2056.680] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2056.680] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2056.680] compiled for 4.0.2, module version = 1.0.0
[ 2056.680] Module class: X.Org Video Driver
[ 2056.681] (II) NVIDIA dlloader X Driver 195.36.24 Thu Apr 22 09:34:29 PDT 2010
[ 2056.681] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2056.681] (--) using VT number 8
[ 2056.683] (II) Primary Device is: PCI 01@00:00:0
[ 2056.683] (II) Loading sub module "fb"
[ 2056.683] (II) LoadModule: "fb"
[ 2056.683] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2056.683] (II) Module fb: vendor="X.Org Foundation"
[ 2056.683] compiled for 1.8.1.902, module version = 1.0.0
[ 2056.683] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2056.683] (II) Loading sub module "wfb"
[ 2056.683] (II) LoadModule: "wfb"
[ 2056.684] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2056.684] (II) Module wfb: vendor="X.Org Foundation"
[ 2056.684] compiled for 1.8.1.902, module version = 1.0.0
[ 2056.684] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2056.684] (II) Loading sub module "ramdac"
[ 2056.684] (II) LoadModule: "ramdac"
[ 2056.684] (II) Module "ramdac" already built-in
[ 2056.684] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 2056.684] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2056.684] (==) NVIDIA(0): RGB weight 888
[ 2056.684] (==) NVIDIA(0): Default visual is TrueColor
[ 2056.684] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2056.684] (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
[ 2056.684] (**) NVIDIA(0): Option "PixmapCacheSize" "300000"
[ 2056.684] (**) NVIDIA(0): Enabling RENDER acceleration
[ 2056.684] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 2056.684] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 2056.684] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 2056.684] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 2056.684] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 2057.090] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2057.091] (II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:1:0:0 (GPU-0)
[ 2057.091] (--) NVIDIA(0): Memory: 524288 kBytes
[ 2057.091] (--) NVIDIA(0): VideoBIOS: 05.72.22.43.32
[ 2057.091] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2057.091] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2057.091] (--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:1:0:0:
[ 2057.091] (--) NVIDIA(0): CRT-0
[ 2057.091] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 2057.092] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 2057.092] (II) NVIDIA(0): Validated modes:
[ 2057.092] (II) NVIDIA(0): "1680x1050"
[ 2057.092] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 2057.092] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 2057.092] (WW) NVIDIA(0): from CRT-0's EDID.
[ 2057.092] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 2057.092] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 2057.092] (--) Depth 24 pixmap format is 32 bpp
[ 2057.092] (II) NVIDIA(0): Initialized GPU GART.
[ 2057.097] (II) NVIDIA(0): Setting mode "1680x1050"
[ 2057.183] (II) Loading extension NV-GLX
[ 2057.202] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 2057.205] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2057.205] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 2057.205] (==) NVIDIA(0): Backing store disabled
[ 2057.205] (==) NVIDIA(0): Silken mouse enabled
[ 2057.205] (**) NVIDIA(0): DPMS enabled
[ 2057.206] (II) Loading extension NV-CONTROL
[ 2057.206] (II) Loading extension XINERAMA
[ 2057.206] (II) Loading sub module "dri2"
[ 2057.206] (II) LoadModule: "dri2"
[ 2057.206] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2057.206] (II) NVIDIA(0): [DRI2] Setup complete
[ 2057.206] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2057.206] (==) RandR enabled
[ 2057.206] (II) Initializing built-in extension Generic Event Extension
[ 2057.206] (II) Initializing built-in extension SHAPE
[ 2057.206] (II) Initializing built-in extension MIT-SHM
[ 2057.206] (II) Initializing built-in extension XInputExtension
[ 2057.206] (II) Initializing built-in extension XTEST
[ 2057.206] (II) Initializing built-in extension BIG-REQUESTS
[ 2057.206] (II) Initializing built-in extension SYNC
[ 2057.206] (II) Initializing built-in extension XKEYBOARD
[ 2057.206] (II) Initializing built-in extension XC-MISC
[ 2057.206] (II) Initializing built-in extension SECURITY
[ 2057.206] (II) Initializing built-in extension XINERAMA
[ 2057.206] (II) Initializing built-in extension XFIXES
[ 2057.206] (II) Initializing built-in extension RENDER
[ 2057.206] (II) Initializing built-in extension RANDR
[ 2057.206] (II) Initializing built-in extension COMPOSITE
[ 2057.206] (II) Initializing built-in extension DAMAGE
[ 2057.215] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2057.215] (II) AIGLX: Screen 0 is not DRI capable
[ 2057.217] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 2057.217] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2057.320] (II) config/udev: Adding input device Power Button (/dev/event0)
[ 2057.320] (II) No input driver/identifier specified (ignoring)
[ 2057.321] (II) config/udev: Adding input device Power Button (/dev/event1)
[ 2057.321] (II) No input driver/identifier specified (ignoring)
[ 2057.322] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/event3)
[ 2057.322] (II) No input driver/identifier specified (ignoring)
[ 2057.322] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/mouse0)
[ 2057.322] (II) No input driver/identifier specified (ignoring)
[ 2057.325] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/event2)
[ 2057.325] (II) No input driver/identifier specified (ignoring)noring) -
Windows 7 Boot Camp no longer recognize my wireless mouse and Keyboard?
I have a mid 2011 27in iMac on 10.9.1 and I run Windows 7 via boot camp, sometimes Parallels as well. Today I tried to boot up in to Windows via Boot Camp, but I can not control the cursor or input anything via kayboard. This has happened before and I only got it working again after reinstalling Windows, which I am REALLY trying to avoid
The thing is, when I boot in to Windows, it is definitely responding to the keyboard when I hold F8 to go in to safe mode, but once the desktop loads up, I lose any function of mouse or keyboard. Even when I try to manually add a device using a USB mouse, it is not detecting any wireless device.
Both my Magic Trackpad and Wireless Keyboard work fine in OS X, Windows 7 when in Parallels and works during the start up of boot camp, but not when Windows 7's desktop boots up.
Any help would be greatly appreciated!Welcome to the Apple Support Communities
You have to download the drivers. To download them, press X key while your Mac is starting to start into Mac OS X, open Boot Camp Assistant and follow the steps to download them. You will have to burn them onto a DVD or USB drive, so you will be able to install the drivers on Windows. Then, it should work fine.
If you can't download them in Boot Camp Assistant, download the drivers from this website > http://www.cafe-encounter.net/p682/download-bootcamp-drivers The links are from Apple and that's safe to download and install -
Imac usb keyboard/mouse freezes - please help!
i have a 700 mhz g4 flat-panel, 768 RAM, 40 GB disk, running OS 10.4.5.
the keyboard and mouse keep freezing up. sometimes one, sometimes the other. if i unplug the offending one and plug it back it, it works fine. i've tried using different USB ports, and re-setting the PRAM, but after a few minutes of use, the problem comes back.
please help!Thanks. I was just going to post that I had more information. Luckily, it seems to jive with what you suspect.
This crash was different. Instead of a "freeze" it panicked. In the USB driver, naturally.
It was throwing these log entries beforehand:
Mar 1 12:45:06 UKELELE kernel[0]: USBF: 406246.406 [0x23a6600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of hub @ location: 0x18000000)
Mar 1 12:50:05 UKELELE kernel[0]: USBF: 406544.669 [0x23a6600] The IOUSBFamily has successfully enumerated the device. Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.296 IOUSBHIDDriver[0x3091500]::start - super::start returned false!
Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.296 IOUSBHIDDriver[0x3091500]::start - aborting startup
Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.306 USB-PS/2 Optical Mouse[0x368a600]: error setting feature (1). err=0xe00002ed
Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.610 USB-PS/2 Optical Mouse[0x368a600]: error setting feature (1). err=0xe00002ed
So I was going to swap out the mouse, anyway. If that doesn't stop it, I'll change USB ports.
Thanks so much for the response. -
No mouse, keyboard, USB after installing 10.9 on MacPro
This morning I installed os 10.9 on my early 08 mac pro. The update from 10.8 went smoothly until the system rebooted and the login box appeared.
I can't move the mouse or type anything.
I'm using a standard usb apple keyboard and mouse plugged into the back. No, hubs or anything else.
USB devices don't seem to get power from any port, my iPhone wont charge and the LED on mouse is dark.
Luckily I had screen sharing turned on and could log-in from my laptop.
The system seems to run normally otherwise.
USB works fine if I boot back into OS 10.8
some other things I've tried:
resting the SMC and PRAM
booting with the shift key down
booting from the recovery partition - no mouse or keybord in the
This is in the system log when the mac pro boots:
USBF: 241. 35 The IOUSBFamily was not able to enumerate a device.
Any ideas?Okay - I fixed it. 10.9 Dosn't like my old airport card.
I took it out and things run okay.
This is it
Model: AR5BXB6 -
Broken laptop input mouse & keyboard [xps15z] [post Syu]
Problems:
-laptop's (dell xps 15z) keyboard and mouse not working
-X broken
I am really stumped here and looking for any help / direction. I am running out of questions to ask, and would appreciate any feedback.
What I have tried:
-creating a new modprobe.conf,
-merging rc.conf.pacnew,
-downgrading to my previous udev, mkinitcpio, and module-init-tools, using the packages found in cache. remade init with
mkinitcpio -p linux
and keyboard and mouse still did not work
-merged locale.conf.pacnew
-merged pacman.conf.pacnew
-traversed almost all of the logs multiple times (have not found a silver bullet, but not positive on what Im looking for..)
Below I have included some notes, my relevant (dates) pacman.log, and what I pulled from dmesg that seemed related to me.
//notes
-usb ports work
-when i hit keys on the keyboard while at the console username prompt, nothing types, but if laptop is a dark place, the keys back-lights actually do light up...
-every other boot I get stuck on MUX error (error has been there since I installed arch, but only now does it freeze occasionally here)
[ 5.627516] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 5.627613] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
-the update that broke stuff I set up my pacman key config
[2012-01-20 05:14] warning: /etc/pacman.conf installed as /etc/pacman.conf.pacnew
[2012-01-20 05:14] >>> Run `pacman-key --init` to set up your pacman keyring.
[2012-01-20 05:14] upgraded pacman (3.5.4-4 -> 4.0.1-4)
-also had to force the filesystem
[2012-01-20 06:01] Running 'pacman -S --force filesystem'
[2012-01-20 06:01] upgraded filesystem (2011.10-1 -> 2011.12-2)
//dmesg findings
[ 1.034772] mousedev: PS/2 mouse device common for all mice
[ 1.045355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 6.172182] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 42.447721] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1/2-1:1.0/input/input15
[ 42.447801] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:04:00.0-1/input0
[ 42.447811] usbcore: registered new interface driver usbhid
[ 42.447812] usbhid: USB HID core driver
//pacman.log
[2012-01-20 05:13] Running 'pacman -Syu'
[2012-01-20 05:13] synchronizing package lists
[2012-01-20 05:14] upgraded linux-api-headers (3.1.4-1 -> 3.1.6-1)
[2012-01-20 05:14] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2012-01-20 05:14] Generating locales...
[2012-01-20 05:14] en_US.UTF-8... done
[2012-01-20 05:14] en_US.ISO-8859-1... done
[2012-01-20 05:14] Generation complete.
[2012-01-20 05:14] upgraded glibc (2.14.1-2 -> 2.15-3)
[2012-01-20 05:14] upgraded libarchive (2.8.5-2 -> 3.0.3-2)
[2012-01-20 05:14] warning: /etc/pacman.conf installed as /etc/pacman.conf.pacnew
[2012-01-20 05:14] >>> Run `pacman-key --init` to set up your pacman keyring.
[2012-01-20 05:14] upgraded pacman (3.5.4-4 -> 4.0.1-4)
[2012-01-20 05:16] Running 'pacman -Syu'
[2012-01-20 05:16] synchronizing package lists
[2012-01-20 05:16] starting full system upgrade
[2012-01-20 05:16] Running 'pacman -Syu'
[2012-01-20 05:16] synchronizing package lists
[2012-01-20 05:16] starting full system upgrade
[2012-01-20 05:22] Running 'pacman -Rdd gcc-multilib gcc-libs-multilib'
[2012-01-20 05:22] Running 'pacman -S gcc-multilib'
[2012-01-20 05:24] Running 'pacman -Syu'
[2012-01-20 05:24] synchronizing package lists
[2012-01-20 05:24] starting full system upgrade
[2012-01-20 05:25] Running 'pacman -S gcc-libs'
[2012-01-20 05:27] Running 'pacman -S gcc-objc-multilib'
[2012-01-20 05:37] Running 'pacman -Syu'
[2012-01-20 05:37] synchronizing package lists
[2012-01-20 05:37] starting full system upgrade
[2012-01-20 05:55] Running 'pacman -Syu'
[2012-01-20 05:55] synchronizing package lists
[2012-01-20 05:56] starting full system upgrade
[2012-01-20 06:01] Running 'pacman -S --force filesystem'
[2012-01-20 06:01] upgraded filesystem (2011.10-1 -> 2011.12-2)
[2012-01-20 06:01] Running 'pacman -Syu'
[2012-01-20 06:01] synchronizing package lists
[2012-01-20 06:01] starting full system upgrade
[2012-01-20 06:02] removed gcc-libs-multilib (4.6.2-3)
[2012-01-20 06:02] installed gcc-libs (4.6.2-5)
[2012-01-20 06:02] upgraded db (5.2.36-2 -> 5.3.15-1)
[2012-01-20 06:02] upgraded pam (1.1.5-1 -> 1.1.5-2)
[2012-01-20 06:02] upgraded coreutils (8.14-1 -> 8.15-1)
[2012-01-20 06:02] upgraded perl (5.14.2-4 -> 5.14.2-7)
[2012-01-20 06:02] upgraded openssl (1.0.0.e-1 -> 1.0.0.g-1)
[2012-01-20 06:02] upgraded libsasl (2.1.23-8 -> 2.1.23-9)
[2012-01-20 06:02] upgraded libldap (2.4.26-5 -> 2.4.28-2)
[2012-01-20 06:02] upgraded unixodbc (2.3.0-2 -> 2.3.1-1)
[2012-01-20 06:02] upgraded apr-util (1.3.12-3 -> 1.3.12-5)
[2012-01-20 06:02] upgraded at-spi2-core (2.2.1-1 -> 2.2.3-1)
[2012-01-20 06:02] upgraded at-spi2-atk (2.2.1-1 -> 2.2.2-1)
[2012-01-20 06:02] upgraded ca-certificates (20111025-2 -> 20111211-1)
[2012-01-20 06:02] upgraded libxi (1.4.3-1 -> 1.4.5-1)
[2012-01-20 06:02] upgraded desktop-file-utils (0.18-1 -> 0.19-1)
[2012-01-20 06:02] upgraded qt (4.7.4-3 -> 4.8.0-2)
[2012-01-20 06:02] upgraded attica (0.2.9-1 -> 0.3.0-1)
[2012-01-20 06:02] upgraded automake (1.11.1-3 -> 1.11.2-1)
[2012-01-20 06:02] upgraded binutils (2.22-2 -> 2.22-4)
[2012-01-20 06:02] upgraded bluez (4.96-1 -> 4.98-1)
[2012-01-20 06:02] upgraded cifs-utils (4.9-3 -> 5.2-1)
[2012-01-20 06:02] upgraded clutter-gst (1.4.4-1 -> 1.4.6-1)
[2012-01-20 06:02] upgraded lcms2 (2.2-1 -> 2.3-1)
[2012-01-20 06:02] upgraded colord (0.1.15-3 -> 0.1.16-1)
[2012-01-20 06:02] upgraded consolekit (0.4.5-1 -> 0.4.5-2)
[2012-01-20 06:02] upgraded cryptsetup (1.4.0-2 -> 1.4.1-1)
[2012-01-20 06:02] upgraded nss (3.12.11-3 -> 3.13.1-2)
[2012-01-20 06:02] upgraded evolution-data-server (3.2.2-1 -> 3.2.3-2)
[2012-01-20 06:03] upgraded gtk3 (3.2.2-4 -> 3.2.3-2)
[2012-01-20 06:03] upgraded gtkhtml4 (4.2.2-1 -> 4.2.3-1)
[2012-01-20 06:03] upgraded evolution (3.2.2-1 -> 3.2.3-2)
[2012-01-20 06:03] upgraded file (5.09-1 -> 5.10-1)
[2012-01-20 06:03] upgraded firefox (8.0.1-1 -> 9.0.1-1)
[2012-01-20 06:03] upgraded telepathy-glib (0.16.3-1 -> 0.16.4-1)
[2012-01-20 06:03] upgraded folks (0.6.5-1 -> 0.6.6-1)
[2012-01-20 06:03] upgraded gcc (4.6.2-3 -> 4.6.2-5)
[2012-01-20 06:03] upgraded libjpeg-turbo (1.1.1-3 -> 1.1.1-4)
[2012-01-20 06:03] upgraded gdk-pixbuf2 (2.24.0-1 -> 2.24.1-1)
[2012-01-20 06:03] upgraded gtksourceview3 (3.2.3-1 -> 3.2.3-2)
[2012-01-20 06:03] upgraded pygobject-devel (3.0.2-1 -> 3.0.3-1)
[2012-01-20 06:03] upgraded python2-gobject (3.0.2-1 -> 3.0.3-1)
[2012-01-20 06:03] upgraded gedit (3.2.5-1 -> 3.2.6-1)
[2012-01-20 06:03] upgraded git (1.7.8-1 -> 1.7.8.4-1)
[2012-01-20 06:03] upgraded gjs (1.30.0-1 -> 1.30.1-1)
[2012-01-20 06:03] upgraded gnutls (3.0.8-1 -> 3.0.11-1)
[2012-01-20 06:03] upgraded glib-networking (2.30.1-1 -> 2.30.2-1)
[2012-01-20 06:03] upgraded gpgme (1.3.1-1 -> 1.3.1-2)
[2012-01-20 06:03] upgraded gmime (2.4.28-1 -> 2.6.4-1)
[2012-01-20 06:03] upgraded gnome-color-manager (3.2.1-2 -> 3.2.2-1)
[2012-01-20 06:03] upgraded gnome-icon-theme-symbolic (3.2.1-1 -> 3.2.2-1)
[2012-01-20 06:03] upgraded gnome-keyring (3.2.2-1 -> 3.2.2-3)
[2012-01-20 06:03] upgraded whois (5.0.13-1 -> 5.0.14-1)
[2012-01-20 06:03] upgraded gnome-nettool (3.0.0-1 -> 3.0.1-1)
[2012-01-20 06:04] upgraded mutter (3.2.1-1 -> 3.2.2-1)
[2012-01-20 06:04] upgraded libpulse (1.1-1 -> 1.1-2)
[2012-01-20 06:04] upgraded gnome-shell (3.2.1-1 -> 3.2.2.1-1)
[2012-01-20 06:04] upgraded gvfs (1.10.1-1 -> 1.10.1-2)
[2012-01-20 06:04] upgraded gvfs-obexftp (1.10.1-1 -> 1.10.1-2)
[2012-01-20 06:04] upgraded vim-runtime (7.3.353-2 -> 7.3.401-1)
[2012-01-20 06:04] upgraded ruby (1.9.3_p0-2 -> 1.9.3_p0-3)
[2012-01-20 06:04] upgraded gvim (7.3.353-2 -> 7.3.401-1)
[2012-01-20 06:04] upgraded hdparm (9.37-2 -> 9.38-1)
[2012-01-20 06:04] upgraded inetutils (1.8-6 -> 1.9.1-1)
[2012-01-20 06:04] upgraded iproute2 (2.6.39-2 -> 3.2.0-1)
[2012-01-20 06:04] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-01-20 06:04] upgraded initscripts (2011.11.3-1 -> 2012.01.2-1)
[2012-01-20 06:04] upgraded jack (0.121.3-4 -> 0.121.3-5)
[2012-01-20 06:04] installed rhino (1.7R3-1)
[2012-01-20 06:04] installed jre7-openjdk-headless (7.b147_2.0-5)
[2012-01-20 06:04] upgraded jre7-openjdk (7.b147_2.0-2 -> 7.b147_2.0-5)
[2012-01-20 06:04] upgraded jdk7-openjdk (7.b147_2.0-2 -> 7.b147_2.0-5)
[2012-01-20 06:04] upgraded redland (1:1.0.15-1 -> 1:1.0.15-3)
[2012-01-20 06:04] upgraded redland-storage-virtuoso (1:1.0.15-1 -> 1:1.0.15-3)
[2012-01-20 06:04] upgraded soprano (2.7.3-1 -> 2.7.4-1)
[2012-01-20 06:04] upgraded libdbusmenu-qt (0.9.0-1 -> 0.9.0-2)
[2012-01-20 06:04] upgraded polkit-qt (0.99.0-1 -> 0.103.0-1)
[2012-01-20 06:04] upgraded phonon (1:4.5.1-2 -> 1:4.6.0-1)
[2012-01-20 06:04] installed gperf (3.0.4-4)
[2012-01-20 06:04] installed qtwebkit (2.2.1-2)
[2012-01-20 06:04] upgraded kdelibs (4.7.4-1 -> 4.7.4-5)
[2012-01-20 06:04] upgraded libassuan (2.0.2-1 -> 2.0.3-1)
[2012-01-20 06:04] upgraded libdrm (2.4.28-1 -> 2.4.30-1)
[2012-01-20 06:04] upgraded libgphoto2 (2.4.10.1-2 -> 2.4.11-1)
[2012-01-20 06:04] upgraded libgsf (1.14.21-1 -> 1.14.22-2)
[2012-01-20 06:04] upgraded libmysqlclient (5.5.19-1 -> 5.5.20-1)
[2012-01-20 06:04] upgraded liboauth (0.9.4-2 -> 0.9.6-1)
[2012-01-20 06:04] upgraded libpcap (1.1.1-4 -> 1.2.1-1)
[2012-01-20 06:04] upgraded libreoffice-en-US (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-common (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-base (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-calc (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-draw (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-gnome (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-impress (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-kde4 (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-math (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-sdk (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-sdk-doc (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-writer (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded util-linux (2.20.1-1 -> 2.20.1-2)
[2012-01-20 06:04] upgraded libtracker-sparql (0.12.8-1 -> 0.12.9-1)
[2012-01-20 06:04] >>> Updating module dependencies. Please wait ...
[2012-01-20 06:04] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-01-20 06:04] ==> Building image from preset: 'default'
[2012-01-20 06:04] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-01-20 06:04] ==> Starting build: 3.2.1-1-ARCH
[2012-01-20 06:04] -> Parsing hook: [base]
[2012-01-20 06:04] -> Parsing hook: [udev]
[2012-01-20 06:04] -> Parsing hook: [autodetect]
[2012-01-20 06:05] -> Parsing hook: [pata]
[2012-01-20 06:05] -> Parsing hook: [scsi]
[2012-01-20 06:05] -> Parsing hook: [sata]
[2012-01-20 06:05] -> Parsing hook: [filesystems]
[2012-01-20 06:05] -> Parsing hook: [usbinput]
[2012-01-20 06:05] ==> Generating module dependencies
[2012-01-20 06:05] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-01-20 06:05] ==> Image generation successful
[2012-01-20 06:05] ==> Building image from preset: 'fallback'
[2012-01-20 06:05] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-01-20 06:05] ==> Starting build: 3.2.1-1-ARCH
[2012-01-20 06:05] -> Parsing hook: [base]
[2012-01-20 06:05] -> Parsing hook: [udev]
[2012-01-20 06:05] -> Parsing hook: [pata]
[2012-01-20 06:05] -> Parsing hook: [scsi]
[2012-01-20 06:05] -> Parsing hook: [sata]
[2012-01-20 06:05] -> Parsing hook: [filesystems]
[2012-01-20 06:05] -> Parsing hook: [usbinput]
[2012-01-20 06:05] ==> Generating module dependencies
[2012-01-20 06:05] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-01-20 06:05] ==> Image generation successful
[2012-01-20 06:05] upgraded linux (3.1.5-1 -> 3.2.1-1)
[2012-01-20 06:05] upgraded linux-docs (3.1.5-1 -> 3.2.1-1)
[2012-01-20 06:05] upgraded linux-headers (3.1.5-1 -> 3.2.1-1)
[2012-01-20 06:05] upgraded mono (2.10.6-1 -> 2.10.8-1)
[2012-01-20 06:05] upgraded mysql-clients (5.5.19-1 -> 5.5.20-1)
[2012-01-20 06:05] upgraded mysql (5.5.19-1 -> 5.5.20-1)
[2012-01-20 06:05] upgraded obexd-client (0.42-1 -> 0.44-1)
[2012-01-20 06:05] upgraded php (5.3.8-5 -> 5.3.9-1)
[2012-01-20 06:05] upgraded php-apache (5.3.8-5 -> 5.3.9-1)
[2012-01-20 06:05] upgraded poppler (0.18.1-1 -> 0.18.2-1)
[2012-01-20 06:05] upgraded poppler-glib (0.18.1-1 -> 0.18.2-1)
[2012-01-20 06:05] upgraded pulseaudio (1.1-1 -> 1.1-2)
[2012-01-20 06:05] upgraded rpcbind (0.2.0-5 -> 0.2.0-6)
[2012-01-20 06:05] upgraded sdl (1.2.14-9 -> 1.2.14-10)
[2012-01-20 06:05] upgraded sdl_image (1.2.10-2 -> 1.2.11-1)
[2012-01-20 06:05] upgraded sdl_ttf (2.0.10-1 -> 2.0.11-1)
[2012-01-20 06:05] upgraded subversion (1.7.2-1 -> 1.7.2-2)
[2012-01-20 06:05] upgraded thunderbird (8.0-1 -> 9.0.1-1)
[2012-01-20 06:05] upgraded totem-plparser (2.32.6-1 -> 2.32.6-3)
[2012-01-20 06:05] upgraded tracker (0.12.8-1 -> 0.12.9-1)
[2012-01-20 06:05] upgraded wavpack (4.60.1-1 -> 4.60.1-2)
[2012-01-20 06:05] upgraded xf86-video-nouveau (0.0.16_git20110829-1 -> 0.0.16_git20120106-1)
[2012-01-20 06:05] upgraded xkeyboard-config (2.4.1-2 -> 2.4.1-3)
[2012-01-20 06:05] upgraded xorg-server-common (1.11.2-2 -> 1.11.3-1)
[2012-01-20 06:05] upgraded xorg-server (1.11.2-2 -> 1.11.3-1)
[2012-01-20 06:05] upgraded xorg-xinit (1.3.1-1 -> 1.3.1-2)
[2012-01-20 06:05] upgraded xterm (275-1 -> 276-1)
[2012-01-20 06:06] Running 'pacman -Syu'
[2012-01-20 06:06] synchronizing package lists
[2012-01-20 06:06] starting full system upgrade
[2012-01-23 04:20] Running 'pacman -Syu'
[2012-01-23 04:20] synchronizing package lists
[2012-01-23 04:20] starting full system upgrade
[2012-01-23 04:20] Running 'pacman -Syu'
[2012-01-23 04:20] synchronizing package lists
[2012-01-23 04:20] starting full system upgrade
[2012-01-23 04:21] removed module-init-tools (3.16-3)
[2012-01-23 04:21] upgraded dbus-sharp (0.7.0-3 -> 0.7.0-4)
[2012-01-23 04:21] upgraded dbus-sharp-glib (0.5.0-3 -> 0.5.0-4)
[2012-01-23 04:21] upgraded gnutls (3.0.11-1 -> 3.0.12-1)
[2012-01-23 04:21] upgraded gstreamer0.10-python (0.10.21-1 -> 0.10.22-1)
[2012-01-23 04:21] installed kmod (4-1)
[2012-01-23 04:21] upgraded udev (175-1 -> 178-1)
[2012-01-23 04:21] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-01-23 04:21] upgraded initscripts (2012.01.2-1 -> 2012.01.3-1)
[2012-01-23 04:21] upgraded libgee (0.6.3-1 -> 0.6.4-1)
[2012-01-23 04:21] upgraded mdadm (3.2.2-4 -> 3.2.3-1)
[2012-01-23 04:21] upgraded mkinitcpio (0.8.0-3 -> 0.8.2-1)
[2012-01-23 04:21] upgraded pixman (0.24.0-1 -> 0.24.2-1)
[2012-01-23 04:21] upgraded poppler (0.18.2-1 -> 0.18.3-1)
[2012-01-23 04:21] upgraded poppler-glib (0.18.2-1 -> 0.18.3-1)
[2012-01-23 04:21] upgraded sdl_image (1.2.11-1 -> 1.2.12-1)
[2012-01-23 04:21] upgraded sg3_utils (1.30-1 -> 1.33-1)
[2012-01-23 04:21] upgraded sqlite3 (3.7.9-1 -> 3.7.10-1)
[2012-01-23 04:21] upgraded xkeyboard-config (2.4.1-3 -> 2.5-1)
[2012-01-23 04:21] upgraded xterm (276-1 -> 278-1)
EDIT: SO NOW x won't even make it as far as it did before (to at least let me see the wallpaper) and eventually goes to a 'something went wrong' screen and I have to shutdown as I don't have a mouse to select Log Out.
//xorg.log
[ 31.490] (**) Option "xkb_rules" "evdev"
[ 31.490] (**) Option "xkb_model" "evdev"
[ 31.490] (**) Option "xkb_layout" "us"
[ 31.490] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 31.490] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 31.490] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 31.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.490] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.490] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 31.490] (--) AT Translated Set 2 keyboard: Found keys
[ 31.490] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 31.490] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 31.490] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 31.491] (**) Option "xkb_rules" "evdev"
[ 31.491] (**) Option "xkb_model" "evdev"
[ 31.491] (**) Option "xkb_layout" "us"
[ 31.491] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event9)
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 31.491] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 31.491] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event9"
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 31.491] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 31.491] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.491] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 31.491] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 14)
[ 31.491] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 31.491] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 31.491] (II) No input driver/identifier specified (ignoring)
[ 31.491] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 31.491] (II) No input driver/identifier specified (ignoring)
[ 31.492] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[ 31.492] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 31.492] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 31.492] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.492] (**) Dell WMI hotkeys: always reports core events
[ 31.492] (**) Dell WMI hotkeys: Device: "/dev/input/event8"
[ 31.492] (--) Dell WMI hotkeys: Found keys
[ 31.492] (II) Dell WMI hotkeys: Configuring as keyboard
[ 31.492] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 31.492] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[ 31.492] (**) Option "xkb_rules" "evdev"
[ 31.492] (**) Option "xkb_model" "evdev"
[ 31.492] (**) Option "xkb_layout" "us"
[ 34.195] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 34.195] (II) intel(0): Printing DDC gathered Modelines:
[ 34.195] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz)
[ 34.195] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz)
[ 34.531] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 34.531] (II) intel(0): Printing DDC gathered Modelines:
[ 34.531] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz)
[ 34.531] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz)
[ 66.265] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 66.265] (II) intel(0): Printing DDC gathered Modelines:
[ 66.265] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz)
[ 66.265] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz)
EDIT: FOUND this bug: https://bugs.archlinux.org/task/28049 - realize I may really be fishing here..
//udev test
# line below is from dmesg
[ 1.068340] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
run_command: calling: test
adm_test: version 178
builtin_kmod_init: load module index
add_matching_files: unable to open '/run/udev/rules.d': No such file or directory
parse_file: reading '/lib/udev/rules.d/10-dm.rules' as rules file
parse_file: reading '/lib/udev/rules.d/11-dm-lvm.rules' as rules file
parse_file: reading '/lib/udev/rules.d/13-dm-disk.rules' as rules file
parse_file: reading '/lib/udev/rules.d/40-gphoto.rules' as rules file
add_rule: IMPORT found builtin 'usb_id --export %p', replacing /lib/udev/rules.d/40-gphoto.rules:11
parse_file: reading '/lib/udev/rules.d/40-hpet-permissions.rules' as rules file
parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file
parse_file: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file
parse_file: reading '/lib/udev/rules.d/53-sane.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-cdrom_id.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-pcmcia.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file
parse_file: reading '/lib/udev/rules.d/61-accelerometer.rules' as rules file
parse_file: reading '/lib/udev/rules.d/61-gnome-bluetooth-rfkill.rules' as rules file
parse_file: reading '/lib/udev/rules.d/64-md-raid.rules' as rules file
parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file
add_rule: IMPORT found builtin 'usb_id --export %p', replacing /lib/udev/rules.d/69-cd-sensors.rules:76
add_rule: IMPORT found builtin 'usb-db %p', replacing /lib/udev/rules.d/69-cd-sensors.rules:77
parse_file: reading '/lib/udev/rules.d/70-infrared.rules' as rules file
parse_file: reading '/lib/udev/rules.d/70-udev-acl.rules' as rules file
parse_file: reading '/lib/udev/rules.d/75-net-description.rules' as rules file
parse_file: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file
parse_file: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file
parse_file: reading '/lib/udev/rules.d/77-nm-olpc-mesh.rules' as rules file
parse_file: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file
parse_file: reading '/lib/udev/rules.d/80-drivers.rules' as rules file
parse_file: reading '/lib/udev/rules.d/80-udisks.rules' as rules file
add_rule: IMPORT found builtin 'pci-db %p', replacing /lib/udev/rules.d/80-udisks.rules:6
parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file
parse_file: reading '/lib/udev/rules.d/90-pulseaudio.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-cd-devices.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-dm-notify.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-keyboard-force-release.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-keymap.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-udev-late.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-dell.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-gateway.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-ibm.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-csr.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file
parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file
udev_rules_new: rules use 188232 bytes tokens (15686 * 12 bytes), 27728 bytes buffer
udev_rules_new: temporary index used 50920 bytes (2546 * 20 bytes)
udev_device_new_from_syspath: device 0x1a25700 has devpath '/devices/platform/i8042/serio0/input/input0'
udev_device_new_from_syspath: device 0x1a34d60 has devpath '/devices/platform/i8042/serio0/input/input0'
udev_device_read_db: device 0x1a34d60 filled with db file data
udev_rules_apply_to_event: IMPORT builtin 'input_id' /lib/udev/rules.d/50-udev-default.rules:23
udev_builtin_add_property: ID_INPUT=1
get_cap_mask: capabilities/ev raw kernel attribute: 120013
get_cap_mask: capabilities/abs raw kernel attribute: 0
get_cap_mask: capabilities/rel raw kernel attribute: 0
get_cap_mask: capabilities/key raw kernel attribute: 402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
test_key: test_key: checking bit block 0 for any keys; found=1
test_key: test_key: checking bit block 64 for any keys; found=1
test_key: test_key: checking bit block 128 for any keys; found=1
test_key: test_key: checking bit block 192 for any keys; found=1
udev_builtin_add_property: ID_INPUT_KEY=1
udev_builtin_add_property: ID_INPUT_KEYBOARD=1
udev_device_new_from_syspath: device 0x1a361d0 has devpath '/devices/platform/i8042/serio0'
udev_device_new_from_syspath: device 0x1a36740 has devpath '/devices/platform/i8042'
udev_device_new_from_syspath: device 0x1a36d00 has devpath '/devices/platform'
udev_rules_apply_to_event: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-input.rules:31
udev_builtin_add_property: ID_PATH=platform-i8042-serio-0
udev_builtin_add_property: ID_PATH_TAG=platform-i8042-serio-0
udev_rules_apply_to_event: IMPORT builtin 'kmod' /lib/udev/rules.d/80-drivers.rules:5
builtin_kmod: execute 'load' 'input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw'
load_module: inserted 'evdev'
udev_device_update_db: created db file '/run/udev/data/+input:input0' for '/devices/platform/i8042/serio0/input/input0'
builtin_kmod_exit: unload module index
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
.INPUT_CLASS=kbd
ACTION=add
DEVPATH=/devices/platform/i8042/serio0/input/input0
EV=120013
ID_INPUT=1
ID_INPUT_KEY=1
ID_INPUT_KEYBOARD=1
ID_PATH=platform-i8042-serio-0
ID_PATH_TAG=platform-i8042-serio-0
ID_SERIAL=noserial
KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
LED=7
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
MSC=10
NAME="AT Translated Set 2 keyboard"
PHYS="isa0060/serio0/input0"
PRODUCT=11/1/1/ab41
PROP=0
SUBSYSTEM=input
UDEV_LOG=6
USEC_INITIALIZED=5011892
Last edited by killnine (2012-01-25 14:39:33)I'm glad that fixed your keyboard.
Good idea about the wiki page. If/when I have time I will add something. Feel free to do so if you have some.
I've not had the computer for long, however the core install boots and works fine, but after updating the keyboard and mouse become unresponsive, so unfortunately from my perspective, one of the updates in the past 4 or 5 months broke it! However, though I've not tried any combinations of boot parameters, the vast majority of live CDs won't even boot without acpi=off (or presumably, only acpi=noirq is actually needed, looking at your tests) so it doesn't look to be Arch specific.
For your X problems, are you using a DE or WM, and how are you logging in? If you can disable the login manager (if present) and start an X session with startx, with say only exec xterm in your ~/.xinitrc that might help pinpoint the issue. If that works, it will unlikely be an X issue, more one of your DE/WM. -
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
APPLE mouse & keyboard not working with Windows (Bootcamp)
I installed Leopard and Windows XP on my Mac Pro. The installation went very smoothly. Only problem I have is that my Apple wireless keyboard and mouse do not work on Windows (frozen) although they work fine on Leopard. I tried a Logitech wireless trackball and it works fine on both Windows and Leopard. Any suggestion?
Thanks. I upgraded from Tiger and downloaded Bootcamp from Leopard Installation disc ( I did not have a beta version ). I then installed Windows XP SP2 ( brand new, just bought for that purpose ). Wonder if Mac wireless keyboard and mouse are compatible with Window. Everything else work beyond my expectation.
-
Keyboard, Trackpad, and Bluetooth mouse stop working
My powerbook G4 1.67 keyboard and trackpad stop working after a few minutes of use. Useing an extermal keyboard or mouse does not help. the caps lock light does not come on either. I force quit by holding the power button down. Fails each time
Please use Apple Troubleshooting wireless mouse and keyboard issues located at http://support.apple.com/kb/ts3048
-
Not recognizing wireless keyboard/trackpad/mouse
Just installed windows 7 on new 2012 imac. loaded the support software. still not recognizing the mac's wireless keyboard, trackpad, or mouse. what should I try??
hi
the N70 mouse has a USB dongle to connect to
Spoiler (Highlight to read)
You may be able to connect the mouse but the Keyboard should be a pair SK8861
The SK8861 mouse and keyboard should be a pair because the USB dongle for both is in the SK8861 mouse.
Im not sure If you can pair the SK8861 keyboard with the n70 USB dongle.
But here's how to pair the keyboard. you can try this out with the N70 usb dongle.
Make sure that the keyboard is very close to the dongle when pairing
1. Unplug the dongle from the computer
2. Remove the battery
3. Hold the F2 F3 and F4 keys on the keyboard all throughout the process
4. Use your left had put the battery in but do not put the keyboard battery cover yet.
5. Left hand still, plug in the USB dongle then right away put the keyboard battery cover
Light will blink but once it stopped you can now let go of the F2 F3 and F4 keys and try the keyboard out.
If this does not work You might need to conatct where you bought it and ask about the keyboard and mouse, that it should come in pair" sk8861 mouse and keyboard.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Keyboard, Trackpad, Mouse and USB ports - Not Responding
Hello,
Here is my problem. Today when I started my MBP, there was no keyboard, no mouse(USB), no trackpad, no USB ports. I restarted it several times, but nothing changes. If not everything looks fine My desktop is availble, also the backlight on the keyboard works fine, but I can do nothing, my MBP is unusable. Only the power button works fine. I tried to connect an external USB keybord without success, the same with usb drives. I'm running 10.5.6 on MBP, Core Duo 1.83 GHz, 2 GB RAM.
I found many discussions here about the same problem( http://discussions.apple.com/thread.jspa?threadID=1568210&tstart=0 ), I tried a restart without battery etc.... Nothing helps.
Please help, my warranty passed away
Message was edited by: gvassilevAs this is literally a brand new imac, I would hope that the ports aren't giving up as I am sure they are very expensive to replace.
If it is that new you should be under applecare so you could take it your nearest apple store and let them deal with it (or call apple first if you want).
Besides the keyboard do you have anything else connected to the usb ports that may be drawing off too much usb power? In which case you may need a powered usb hub.
Maybe you are looking for
-
How can I get a real person to look at my IP Profi...
My current saga started 4 days ago when a BT van was spotted in the village. This is usually a bad sign as it means a BT engineer is about to break a random number of people's broadband connections. Quite why they feel the need to do this is beyond m
-
Dbms_scheduler error in calling a schell script.
Hi, I am trying to execute a shell script which is called from a procedure. below are the changes which i have made and after that i am still getting error as below: Please help me as to where i am going wrong: Steps takesm: 1) rdbms/admin/externaljo
-
I have an IPhone 4 that I just activated yesterday with a pre paid plan, but data doesn't work
I activated the phone yesterday. The wifi works but the 3g data does not. I have between 3-5 bars of strength but the phone will not connect to the internet. I had a virgin mobile pre paid phone that did not give me any trouble. Please help. I h
-
HI Friends, I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error: The dependency is not configured in schema resource. Possible reason one or more import/include is not set correctl
-
Simple problem with transitions
Hi everyone I am having a small bit of a problem with transitions.... When I drag a clip from the viewer over the canvas to get the menu bar pop up, and select insert with transition ( cross dissolve ) it puts in a transition but its very short and t