Keyboard not recognized when waking up from suspend
Hello people,
I have a HP Pavilion 11-n030ar x360 laptop (http://support.hp.com/us-en/document/c04439109).
Every time the laptop wakes up from suspend, the keyboard isn't responsive anymore (even after waiting more than 10 minutes) so when I am using i3 I must hard shutdown which is really annoying.
I rebooted 3 times in a row and the keyboard wouldn't be recognized (despite that the keyboard was responsive at the grub menu, because I dual boot with Windows).
Here's the output of dmesg at waking up:
[ 3934.059390] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.110013] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.110959] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.112394] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.113067] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.113692] pci_bus 0000:01: Allocating resources
[ 3934.113737] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 3934.113759] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 3934.113784] pci_bus 0000:02: Allocating resources
[ 3934.113830] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 3934.113855] pci_bus 0000:03: Allocating resources
[ 3934.113951] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 3934.113975] pci_bus 0000:04: Allocating resources
[ 3934.114022] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.114052] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 3934.114072] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 3934.114091] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 3934.114109] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 3934.114147] pcieport 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 3934.114165] pcieport 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 3934.114207] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3934.114225] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3934.114265] pcieport 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3934.114283] pcieport 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3934.114322] pcieport 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3934.114339] pcieport 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3934.114382] pcieport 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3934.114400] pcieport 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3934.114438] pcieport 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3934.114455] pcieport 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3934.114481] pcieport 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 3934.114498] pcieport 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 3934.114536] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3934.114553] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3934.115184] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.116060] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3934.176869] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 3934.606118] PM: Syncing filesystems ... done.
[ 3935.195990] PM: Preparing system for mem sleep
[ 3935.196344] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 3935.198628] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3935.200146] PM: Entering mem sleep
[ 3935.200200] Suspending console(s) (use no_console_suspend to debug)
[ 3935.990309] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3935.991327] sd 0:0:0:0: [sda] Stopping disk
[ 3936.073998] serial 00:02: disabled
[ 3936.465515] PM: suspend of devices complete after 1263.564 msecs
[ 3936.492220] PM: late suspend of devices complete after 26.662 msecs
[ 3936.494058] r8169 0000:04:00.0: System wakeup enabled by ACPI
[ 3936.494918] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 3936.508249] PM: noirq suspend of devices complete after 15.999 msecs
[ 3936.508398] ACPI: Preparing to enter system sleep state S3
[ 3936.516245] PM: Saving platform NVS memory
[ 3936.516260] Disabling non-boot CPUs ...
[ 3936.516374] intel_pstate CPU 1 exiting
[ 3936.518362] smpboot: CPU 1 is now offline
[ 3936.520169] ACPI: Low-level resume complete
[ 3936.520240] PM: Restoring platform NVS memory
[ 3936.520782] Enabling non-boot CPUs ...
[ 3936.520839] x86: Booting SMP configuration:
[ 3936.520841] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3936.539156] CPU1 is up
[ 3936.539375] ACPI: Waking up from system sleep state S3
[ 3936.752946] acpi LNXPOWER:02: Turning OFF
[ 3936.753011] acpi LNXPOWER:01: Turning OFF
[ 3936.753049] acpi LNXPOWER:00: Turning OFF
[ 3936.766288] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 3936.767038] PM: noirq resume of devices complete after 13.963 msecs
[ 3936.767792] byt_gpio INT33FC:01: restored pin 3 conf0 0x2003cc02
[ 3936.767799] byt_gpio INT33FC:01: restored pin 4 conf0 0x2003cc02
[ 3936.767806] byt_gpio INT33FC:01: restored pin 5 conf0 0x2003cc02
[ 3936.767835] byt_gpio INT33FC:01: restored pin 13 conf0 0x2003cc01
[ 3936.767903] byt_gpio INT33FC:02: restored pin 4 conf0 0x2003cc80
[ 3936.767915] byt_gpio INT33FC:02: restored pin 6 conf0 0x2003cc80
[ 3936.767923] byt_gpio INT33FC:02: restored pin 7 conf0 0x2003cc80
[ 3936.946944] PM: early resume of devices complete after 179.656 msecs
[ 3936.947399] r8169 0000:04:00.0: System wakeup disabled by ACPI
[ 3936.959794] sd 0:0:0:0: [sda] Starting disk
[ 3936.996879] rtc_cmos 00:00: System wakeup disabled by ACPI
[ 3937.124442] r8169 0000:04:00.0 enp4s0: link down
[ 3937.410368] usb 1-1: reset low-speed USB device number 2 using xhci_hcd
[ 3937.681899] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3937.840688] usb 1-3: reset high-speed USB device number 3 using xhci_hcd
[ 3938.628369] psmouse serio1: synaptics: queried max coordinates: x [..5672], y [..4722]
[ 3938.690690] psmouse serio1: synaptics: queried min coordinates: x [1380..], y [1192..]
[ 3938.767112] r8169 0000:04:00.0 enp4s0: link up
[ 3939.208191] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3939.239853] ata1.00: configured for UDMA/133
[ 3939.258353] PM: resume of devices complete after 2309.553 msecs
[ 3939.258744] PM: Finishing wakeup.
[ 3939.258748] Restarting tasks ... done.
[ 3939.314800] systemd[1]: Unit suspend.target is bound to inactive unit. Stopping, too.
[ 3939.370291] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 3939.622830] r8169 0000:04:00.0 enp4s0: link down
[ 3939.622842] r8169 0000:04:00.0 enp4s0: link down
[ 3941.265186] r8169 0000:04:00.0 enp4s0: link up
I hope to diagnose the problem so that I can fix it, but from the dmesg message, it's not clear to me what's wrong.
Any help is appreciated, thanks!
I just started having the same problem on my desktop. Nothing in the logs that I can find, just Suspending system... and that's it.
I don't think the keyboard is working at all, I would at least be able to reboot in the dark, not to mention Caps/Num lock lights won't come on either.
Mine started after I went from 3.13.5 > 3.13.6, but I also upgraded nvidia (331 > 334) and systemd (208-210) in the same -Syu, amongst others.
Similar Messages
-
Monitor not reacting when waking computer from sleep.
Monitor: HP Pavilion 22bw IPS LED Backlit Monitor
Computer: HP Pavilion Desktop 500-314
Processor: MD A8-7600 Radeon R7, 10 Compute Cores 4C + 6G, 3.10 GHz
RAM: 8 gb
Windows 8.1
System Type: 64-bit operating system, x-64 based processor
Basically when I wake the comp from sleep, the comp itself turns on, but the monitor does not respond at all. I have to force shutdown all the time. When I turn on the computer, the monitor displays picture again.Hello flashlight365,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issue with your HP Pavilion 22bw IPS LED Backlit Monitor waking up after being put into sleep mode by your HP Pavilion 500-314 Desktop PC running Windows 8.1. I would like you to ensure that you have the AMD Graphics Driver installed. As well there is no HP Pavilion 22bw IPS LED Backlit Monitor Driver for Windows 8.1, but you can try installing the HP Pavilion 22bw IPS LED Backlit Monitor Driver, which is for Windows 8 in compatibility mode.
As there are no additional drivers for your monitor if the issue persists beyond what I have posted you can try the steps below to turn off the computer putting the monitor to sleep to begin with:
Step 1. At the Tiles Menu type "power"
Step 2. Click on Power and Sleep Settings
Step 3. Select "Never" for both settings
Please re-post if you still require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
IPhone 6 plus - screen not rotating when waking up from sleep
I just got a 6 Plus and I'm having issues with the screen rotation. It seems to be reproducible and I have the view set to standard and I have tried a factory reset.
If I have the phone in portrait mode and put it to sleep. That mode seems to stick. As an example, I can hold my device in landscape mode and unlock it but the app will not automatically switch to landscape. It will stay stuck on portrait. I have to move the device to portrait and then back to landscape to get the correct orientation. Any ideas on how to fix this?Also when it wakes up from sleep the screen flashes, don't think its supposed to do that.
Here is a picture I took with my phones that shows how the screen looks like, notice the difference in brightness in a pattern.
http://img510.imageshack.us/img510/2551/dsc00266oe7.th.jpg -
HT2494 keyboard not recognized when I reboot 27 in thunderbolt display
Just recieved my new 27 inch Display and when I reboot it does not recgonize my wired Apple keyboard?
Any help would be appreciated.
I did plug it directly into my mac mini and it is working, however I would prefer to use the one on the display if possible.
And other accessories as wellPer Apple support, I reset the NVRAM or PRAM and it seems to have fixed the problem. My USB ports are not longer turning off. They were crashing every few hours and it's been 24 hours without an incident, so we'll see if it lasts. For those who don't know how to reset there is a link below.
http://support.apple.com/kb/HT1379?viewlocale=en_US -
Hello,
My config is OSX 10.9.1 new macbook pro 13 retina (2014).
The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
It was not the case before I bought the BT mouse.
Is this problem between Wifi and bluetooth coming from the OS?
Is there a fix already available or scheduled?
ThanksHello alexandrefromfrance
Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password". Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Regards,
-Norm G. -
High power comsumption and wrong setting when waking up from sleep
See here for some more information: http://forums.lenovo.com/t5/Windows-7-RTM-Discussion/High-Power-Consumption-with-Windows-7/td-p/1668...
Settings: T400, integrated GPU,"maximum battery live" power sheme, brightness level 3, wlan on. Newest switchable graphics driver, power manager and power management drivers installed, SU4 didn't find newer drivers.
Power consumption is between 12-16W most of the time, whereas it was close to 10W on XP, from what i heard from a friend, i installed win7 on my machine right after i bought the thinkpad.
When waking up from sleep( i think hibernation as well) power consumption is abnormal, because both GPUs are activated. You have to switch to to the dedicated and back to the integrated via power manager to deactivate the ATI, which is very annoying.
Is lenovo working on these issues or are there any workaroungs already?I've got similar problems on a T400 with hybrid graphics running Windows 7 x64 Professional, upgraded from Vista x64 Professional. I've upgraded everything to the latest (driver, bios, etc etc) using System Update.
When I boot up from cold, and switch to using batteries, the power consumption is around 8w. Very good.
Then I suspend, and resume from suspend, and the power consumption shoots up to like 20w. Horrible.
Then I manually switch to "High performance" and then back to "Energy saving", the power consumption comes back down, but to >9w, which is like 13% above the original 8w level. Acceptable, but not good.
This seems to indicate there're at least two problems with the power management aspect of T400 + Win7 x64:
First, there is the well-known problem that both internal and external graphics cards get turned on upon resume. Lenovo, please fix this problem. It's completely unacceptable to have to manually perform that switching every time one closes, and then opens the lid, or loss 60% of the battery life. And I do need to use the external GPU from time to time, so disabling it at BIOS level is not acceptable either.
Second, there is the more subtle problem that some other hardware/driver besides the graphics card makes the T400 draw an extra >1w upon resume.
I really wonder if these problems occur with T400 preinstalled with Win7 x64. If they do, shouldn't every major laptop review sites take notice of the defect and warn people. If they don't, then I do not really see why it's so hard for Lenovo to provide earlier users with the right driver/registry patch/etc to enable the correct behavior. As far as I know, these problems have not been fixed since Win7 came out.
Finally let me add that other that this, I'm extremely satisfied with my T400/Win7 system. The thermal dissipation, noise level, and durability are just top-notch. But this just makes the above mentioned problems more of a thorn in the side! -
Wireless mouse and keyboard not recognized
I know that I have had this issue before, but can't remember what the solution is (old age?) My iMac G5 PPC has a wireless mouse and keyboard (the old apple white one). The iMac came with these as an option but WITHOUT the bluetooth card inside. (I still don't know how this works, but it does). Anyway, the mouse and keyboard were not recognized when I tried to get on today. The batteries are good. If I go to system prefs (using an even older wired mouse) there is no bluetooth option (since no card is present). I don't know how to get the computer to try to recognize both. Any help is definitely appreciated.
HI David,
If the iMac didn't come with Bluetooth software/hardware, then are you using a USB Bluetooth dongle?
And open System Profile (Applications/Utilities)
Select Bluetooth on the left under Hardware. You may need to click the gray disclosure triangle so it faces down. What does it say on the right?
If the Bluetooth icon is in your Status Menu Bar (top right in your screen). Click the icon and make sure Bluetooth is turned on. Then click: Open Bluetooth Preferences and try re-pairing the mouse and keyboard.
Carolyn -
[SOLVED]Hard Disk not recognized when installing
Hey all, I'm just starting with Arch and I've had some trouble installing it on my Acer netbook.
My first installation went well except that I had forgot to download the wireless tools so I decided to do a fresh install as I had no access to a wired connection at the time. The second installation attempt must have had some error on my part as Arch failed to start after selecting it from Grub, saying that the kernel was not available/not recognized.
Now my subsequent attempts at installing have failed because the hard disk is not recognized when running either cgdisk or cfdisk. Instead of showing my hard drive partitions after running
cfdisk /dev/sda
it shows my usb drive. If I instead use
cgdisk /dev/sda
it displays an error saying that the disk is damaged or not recognized. When I first saw this I thought my disk was failing, so I tried #! to see if it would show the same error, but it was able to recognize the entire disk and install correctly. Now, even after having the entire disk formatted as ext4 with #! installed, cgdisk is still giving me the same error about a damaged disk.
Am I doing something incorrectly or is there a fix for this? I haven't been able to find any information about this after a good while of searching.
Thanks for your help.
Last edited by Forest_Leaves (2013-03-05 08:30:24)srs5694 wrote:The cgdisk "damaged disk" error is probably a result of the tool seeing an MBR partition table on your USB flash drive, rather than the GPT disk it's expecting. If I'm right, you should not follow s1ln7m4s7r's advice, since that will simply trash your USB flash drive!
If you mean by trashing the USB flash drive, that it will delete all data and partitions on the selected drive it is correct, because:
dd if=/dev/zero of=/dev/$disk bs=4096 count=1
- this will delete all partition-table data
sgdisk -o /dev/$disk
- this will clear out all data. This includes GPT header data, all partition definitions, and the protective MBR.
/dev/$disk
- this will make you enter ncurses-based GUID partition table (GPT) manipulator, where you can create new partitions
You should only do this if you are certain of what disk it is.
Now if when you said this, you were meaning it will became broken, then it may be a special kind of usb drive because i've donne it many times and i've not broken any.
srs5694 wrote:My guess is that either your hard disk has become /dev/sdb (this can happen in some cases; disk identifiers aren't really fixed) or you're missing a driver for your hard disk controller because you've booted a different kernel or a different initrd file. Another possibility is that there's a hardware fault -- probably a loose cable -- that's preventing the kernel from seeing the disk.
If the usb drive is not where you installed arch, then you need to find if there are more recognized drives:
lsblk | grep disk
And see the uuid of the root partition you want, and add it to your bootloader boot line:
blkid /dev/sdxx
Last edited by s1ln7m4s7r (2013-03-04 19:17:36) -
Freezes when gets back from suspend mode
My 2010 MacMini freezes and show a black courtain sometimes. This happens when gets back from suspend mode. The RAM has passed a test memory and it hasn´t any problem.
Please, sorry for my english.
Regards from Spain.
Mi MacMini de 2010 me muestra una cortinilla negra y me pide que lo reinicialice de vez en cuando. Le pasa cuando regresa de haber estado suspendido o con la pantalla en reposo. La memoria Ram ha pasado un test por si podía ser éste el problema.
Saludos.Here you are:
Sun May 27 10:12:14 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f819d9e67, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000000a157000, CR3: 0x000000017f555000, CR4: 0x0000000000000660
RAX: 0xffffff80242c3d00, RBX: 0xffffff802a41d200, RCX: 0xffffff80242c3d00, RDX: 0x0000000000617577
RSP: 0xffffff80e7c6bb58, RBP: 0xffffff80e7c6bb80, RSI: 0x0000000000000000, RDI: 0xffffff8012614000
R8: 0x7c1e500000000001, R9: 0x00000000bb7c364d, R10: 0xfffffe800768aa68, R11: 0x00000000000626d9
R12: 0x0000000000000028, R13: 0xffffff80242c3d00, R14: 0xffffff8018060880, R15: 0xffffff80242c3d00
RFL: 0x0000000000010246, RIP: 0xffffff7f819d9e67, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x000000000a157000, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80e7c6b800 : 0xffffff8000220792
0xffffff80e7c6b880 : 0xffffff80002c473a
0xffffff80e7c6ba30 : 0xffffff80002da0cd
0xffffff80e7c6ba50 : 0xffffff7f819d9e67
0xffffff80e7c6bb80 : 0xffffff7f819da779
0xffffff80e7c6bbd0 : 0xffffff800063abcb
0xffffff80e7c6bc10 : 0xffffff7f819dae2d
0xffffff80e7c6bc40 : 0xffffff800065609b
0xffffff80e7c6bd80 : 0xffffff80002a3f08
0xffffff80e7c6be80 : 0xffffff8000223096
0xffffff80e7c6beb0 : 0xffffff80002148a9
0xffffff80e7c6bf10 : 0xffffff800021bbd8
0xffffff80e7c6bf70 : 0xffffff80002aef20
0xffffff80e7c6bfb0 : 0xffffff80002daa33
Kernel Extensions in backtrace:
com.apple.driver.AudioAUUC(1.59)[8F634EA0-B0A8-3577-918F-B27A8CF8C6CE]@0xffffff 7f819d8000->0xffffff7f819dcfff
dependency: com.apple.iokit.IOACPIFamily(1.4)[4A5A4624-7A52-3EA0-BB8D-5B265B086727]@0xfffff f7f812cd000
dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80866000
dependency: com.apple.iokit.IOAudioFamily(1.8.6fc17)[0FAF6C3F-B92F-30EA-B97F-86A38119C67F]@ 0xffffff7f80eec000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f808a0000
BSD process name corresponding to current thread: iTunes
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: XXXXXXXXXXXX
System model name: Macmini4,1 (Mac-F2208EC8)
System uptime in nanoseconds: 239987230897603
last loaded kext at 279002290275: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f807d5000, size 241664)
last unloaded kext at 250544845394: com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0xffffff7f81d93000, size 24576)
loaded kexts:
com.parallels.kext.prl_hid_hook 7.0 14920.689535
com.parallels.kext.prl_hypervisor 7.0 14920.689535
com.parallels.kext.prl_usb_connect 7.0 14920.689535
com.parallels.kext.prl_vnic 7.0 14920.689535
com.parallels.kext.prl_netbridge 7.0 14920.689535
com.logmein.driver.LogMeInSoundDriver 1.0.0
at.obdev.nke.LittleSnitch 2.4.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.ApplePlatformEnabler 2.0.5d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.GeForce 7.1.8
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleSDXC 1.2.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.iokit.AppleBCM5701Ethernet 3.1.2b2
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleUSBOHCI 4.4.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 160.7
com.apple.driver.AppleHIDKeyboard 160.7
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.5f11
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.nvidia.nv50hal 7.1.8
com.apple.NVDAResman 7.1.8
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.0
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
I hope this could help.
Thank you!!! -
Disabled ipod not recognized when plugged back in to itunes.
Daughter's disabled ipod (second time) is not recognized when we follow instructions to enable it and plug into itunes.
HT1808 is the article you need to follow. You need the section labeled "Placing the device into recovery mode."
You need to power the device off. Once the device is off press and hold the Home button or the button on the front of the device and while holding the Home button plug in the device and continue holding the home button until you see the image below. -
My Apple id and password is not recognized when I tried to download an app. I reset my password but it still did not recognize it. This website recognized it.
Did you go to Settings>iTunes and App Stores and sign out and sign back in?
-
Help... Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?
Because many of the camera makers slightly alter their versions of their raw format whenever they release a new camera model.
Nikon does it, Canon does it, and also several other camera makers.
There is not a single version of NEF that all Nikon cameras use, nor a single version of CR2 for all Canon models.
Here is a list of supported cameras and the required ACR plugin needed to open the raw files.
Camera Raw plug-in | Supported cameras
Versions of ACR are specific to each version of Photoshop.
Older versions of PS cannot use the latest version of ACR.
You need to download the latest version of Adobe DNG Converter.
This will convert your newer 7100 files to DNGs that can then be opened in older versions like CS3.
Be aware DNG only works on folders of files, not individual files. Select the FOLDER not a single file -
Serial number not recognized when I update lightrrom
serial number not recognized when I update lightrrom
More specifics might be helpful, but try this info site
Lightroom and Creative Cloud FAQ -
I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What should I do?
I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What do I do?
Is the iPod Touch specifically stated as being compatible? Have you tried to perfrom a hard reset of the iPod with it still connected? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock -
I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
Help/input would be much appreciated. Thank you!
Kristen.you should properly install adobe products, not move, migrate or otherwise transfer them.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
HP PSC 1410 All in One Series Up to a month or so ago whenever I replaced a print cartridge I followed instructions and pressed the "scan" button and printed a test page. Following that everytime I turned the printer on it produced the page I was lo
-
Calling a function in DBMS_JOB
Hi All, I have to create a job using DBMS_JOB where the interval should be a parameter, meaning to change the interval whenever needed. I have a table with fields PARAMETER_NAME varchar2(1000) VALUE varchar2(1000) How do I write a function that fetch
-
Dear All, anybody have the supplier statement of account in Payables??? Which can help us to get information for Prepayment, Invoices, Credit/Debit Notes, Payments. Regards Malik Asif Joyia
-
I like sharing my photos as a screen saver, but I do NOT want album cover artwork.
I like sharing my photos as a screen saver on Apple TV Generation 2. but I do NOT want album cover artwork. to be mixed in with photos. Is this possible?
-
I notice that there are now two ACR Profile options in the Camera Calibration panel for the Nikon D3. Namely 4.3 and 4.4; the latter apprearing to be the default. I have to say to my eye the conversions each make on a sample NEF file appear remarkabl