Keyboard not working correctly when texting.

Since updating my iphone 4 to the latest software version! everytime i write a text about halfway through it if i try to press the space bar or a letter the keyboard selects a letter near it. this has only happened since the software update and it only happens when texting. any idea's? or do apple know of the problem?

rbrylawski wrote:
Do you by any chance have the Emoji Free app on your iPhone? Other's reported this some time ago and the common thread (and solution) was to get rid of that app. Here's a link you can click on to read that thread: http://discussions.apple.com/thread.jspa?messageID=12296289&#12296289
That isn't the problem. I have the same problem with it typing a B or M sometimes when I double tap the space bar for a period. I have never installed that app and have no reason to.

Similar Messages

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Keyboard not working correctly on laptop. What do I do?

so I was using windex to clean my laptop and it went on my keyboard too. I cleaned it off but I noticed that it was not functioning properly. Some letters were not even working. After 24 hrs. almost everything is working but not correctly. Some keys be typing weird things and opening programs. Like w types out 2w and e opens a program. F8 doesn't work either. Please help.

Hello gurmeet1126,
Welcome to the HP Forums!
I understand the keyboard is not working correctly. I'll do my best to help, but first I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Also, try another keyboard. This will help determine whether or not the issue is with one keyboard or several. Thanks!
Mario
I worked on behalf of HP.

Menu Widget is not working correctly when applied in Master Page?

Hi There,
Is there a reason why menu widget doesn't work correctly when put in the master page? When I do preview it only highlights certain menu and doesn't highlight other ones? In order to fix this I had to take my menu widget off the master page and had to manually apply the menu widget on each page for it to work correctly? Is there a reason why this is happening and are you guys working on fixing this?
Best Regards,
Nick

Hi There,
Just published the northcountydoulas website through business catalyst that
wasn't working correctly...The menu widget is in the master page...
Best Regards,
Nick

My keyboard does not work properly when texting etc

Hi All
My keyboard does not work properly on my Iphone 4 when texting, it brings the wrong letter or wont let me choose the one i want. Anything i can do to correct this or is it a visit to apple?
Cheers for any support in advance.

I have rebooted and synchronised it with the mac. I dont even have to touch the screen now and some letters get picked up.

[solved] keyboard not working correctly on vc/1

the behaviour is quite odd.
when i hit ctrl-alt-f1, and switch to the first virtual console, trying to login, or even type doesnt work quite as it should.
example, i try to login: this is what i get:
lappy login: elragn
password:
when the user name should be eldragon, if i type each letter at a time, until i get it to work, i can type correctly, and its not always the same letters that dont work. of course, the password comes in blank, and sometimes, when i get it all right, i can login, and the effect contiues
this is not a hardware issue, other virtual consoles work ok, and the keyboard works fine under Xorg.
so, what could be wrong with this vc? anyone got a clue? ive searched the wiki, bug reports, google, and the forums (not in this order) for an answer but i came up empty.
PD. if im posting in the wrong forum, please move it where it should go
Last edited by eldragon (2009-03-22 18:08:54)

Hi,
Since the problem is in the vc's, and the keymap is loaded "pre Xorg", I'd start by doing some tests there.
I'm still a learner myself, so this might not work, or it might, either way, you've got nothing to loose
First of all check logs for errors, maybe something pops out.
If no errors on logs, than here's what I would do if I were you:
(backup /etc/rc.conf , /etc/inittab , /etc/locale.gen to some directory)
1. Let's start by isolating the problem by not going to gdm->gnome automatically, so you can test vc's themselfs more efficiently and quicker.
take out gdm from the DAEMONS line in /etc/rc.conf (something like this)
DAEMONS=(syslog-ng network netfs crond alsa hal fam)
2. let your /etc/inittab be like you have in this section (id:3)
## Only one of the following two lines can be uncommented!
# Boot to console
id:3:initdefault:
# Boot to X11
#id:5:initdefault:
and comment everything here:
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
3. do you use a non-us keyboard?
check your rc.conf for the 1st lines, mainly your KEYMAP
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="your.timezone.here"
KEYMAP="your.keymap.here"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
confirm that your keymap exists in /usr/share/kbd/keymaps and double confirm the name is right, example:
for US keyboard the file is 'us.map.gz' so KEYMAP="us" (take out .map.gz); in case your keyboard is not US, check the name, as some have more letters than others
(usually /usr/share/kbd/keymaps/i386/qwerty unless your pc is not i386 or qwerty ofc )
4. reboot pc.
You'll be in vc/1.
Now, instead of jumping in consoles with ctr-alt-Fx, try jumping just with Alt+Fx. (if it doesn't work, go ctrl+alt+fx ofc)
Do Alt+F2 and start typing as normal, anything and manything at any speed and confirm is good. Don't press enter. Just testing keystrokes.
Do Alt+F3, Alt+F4, Alt+F5 and test the same for each vc.
Now for the final and problematic one, go Alt+F1 and test.
If it's good, then probably your problem is on X/gdm/gnome or anything that is loading after vc, or if you changed your keymap, then that was the faulty thing.
If it's not good, keep on reading
5. don't enter in vc/1, rather jump to vc/2 or 3 or something and enter as root, let's edit your /etc/rc.conf again.
copy to a piece of paper your 1st options in case they are different from below:
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="your.timezone.here"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
basicly is trying to put it to a default state. Put your options just like they are above, except TIMEZONE, you can put yours, I don't remember default one.
Reboot and test again just like in step 4.
If it doesn't work, you might give a look at /etc/locale.gen and just uncomment these 2 lines:
#en_SG.UTF-8 UTF-8
#en_SG ISO-8859-1
en_US.UTF-8 UTF-8
en_US ISO-8859-1
#en_ZA.UTF-8 UTF-8
#en_ZA ISO-8859-1
leave every other line commented. in case you had some of your own uncommented, copy to a paper wich ones were, and comment them.
write in console
locale-gen
let it end generating the locales, reboot, and step 4 again.
6. Still not working, let's try to put things bad proposedly! Change your KEYMAP to another one, if qwerty, just choose another qwerty language, all letters should be on same place, except for punctuation ofc.
Reboot and try again as step 4.
Still not working? Change the LOCALE and keep your wrong qwerty keyboard. (LOCALE will probably change some words, like password to it's LOCALE language, etc).
Reboot and try again as step 4.
Still not working? ok, final attempt, change back your LOCALE and your KEYMAP to the values you had before, the correct ones.
Reboot and try again as step 4.
7. If still not working, well, for now I don't know much more. Take in consideration that the boot process goes through several steps, the error might be in one of those steps. One last thing you can try, altho I think it works just in DE/WM modes, I've read in some posts (here or not, can't remember) that by pressing Ctrl-Alt-K you can change your keyboard layout, assuming you have a second one, and use them for different things, I think the example I read on the post was something like, you wanna code in english but talk in irc in russian for example.
I kinda doubt it works, but if it also activates in vc's mode, then you could have pressed it accidently (like when doing ctrl-alt-fx, your finger slipped ).
press ctrl-alt-k, type a few letters, press ctrl-alt-k again, type more letters, and you'll see if it does something or not.
Again, just try, you got nothing to loose
One thing I noticed, is that when trying to put some characters on vc as username, it acts as delete, some even erase the all line in one go and some don't do nothing, some of the characters were # @ £ §.
8. Since it didn't work, let's put everything as it was.
8.1. go to /etc/inittab and put like this:
(comment id:3, uncomment id:5 // uncomment x:5:...gdm...)
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
8.2. edit /etc/rc.conf and DON'T put back the gdm on daemons line.
Alter the 1st lines ranging from LOCALE to USECOLOR to the ones you copied to a paper.
8.3. comment/uncomment the locales on /etc/locale.gen as you have on paper and run in console
locale-gen
8.4. you're set, reboot and you're on gdm->gnome again. (still no vc/1 working tho )
note: in your initial /etc/iniitab you had id:3 uncommented and gdm on daemons, so you would go automatically to gdm as you started your pc, but, what if something happens and you need to go to another mode before gdm runs? you couldn't do it easily with gdm on daemons.
If you put it like I wrote above, when you turn on the pc, it's the same, you go automatically to the gdm, but, in case something happens, you can always go to another mode before gdm runs, by doing the following (read here on wiki or foruns, will put link when I find it)
Pc reboots and you're on GRUB, press 'e', choose the kernel and press 'e' again, go to the end of the line where it says 'ro', and add a 3 to the end, to look like this 'ro 3', press 'b' (boot) and you're on mode 3 without going to gdm
But ofc, this is just a choice, if you prefer to have as you had it, by all means, just put gdm on daemons line, and your /etc/inittab as initially, that's the beauty of Linux, it's to your fit
Good Luck!

Macbook Pro keyboard not working correctly.

I have upgraded through a developer account to OS X 10.8 and sometimes when i use safari or any other application the keyboard wont work, so i have to close out of the application and then re open it and if that still does not work, i have to restart the computer. Is this just a bug with the os x 10.8 software, or just my computer?

Since you are a developer and 10.8 hasnt been released to the general public, how would you expect us to know. Post in your developer area.

Keyboard not working even when trying to go to BIOS

Hi,
I have IBM Thinkpad R60 9458 A13 laptop having Windows 7 ,today its keyboard is not working but in Windows its function keys like brightness or sound is responding without pressing Fn key.
And no other letter or numeric key is responding.
I tried to boot the laptop and trying to press Thinkvantage button, its not responding.
I then inserted Windows 7 OS DVD and when prompt comes to press any key ..i tried all key but no help.
I then clicked on Compatibility option to have keyboard on screen which is working fine.
Pls advise what would have gone wrong
Regards
Sandeep

Hi Sandeep,
Welcome to Lenovo Community Forums!
I’m sorry to hear that a few keys in the keypad of your Lenovo ThinkPad R60 is not working properly.
Check if the keys are working in different applications. Some keys such as the function keys F1 through F12 will not work with every program. An easy way to test this is to open notepad or other word processing program and trying the key. Try getting into safe mode and see if the keys work. Remove the key from the keyboard and clean it. In some situations dirt, hair, dust, etc. can obstruct keys causing them not to work.
Please try to get into BIOS mode and see if the keyboard is working there. Tap F1 key while system shows the Lenovo logo to get into BIOS.
1. If you are able to use the keyboard in BIOS, it could be a software issue. I would recommend in that case to do a System Restore which will revert the settings in your system to a previous time.
2. If keyboard doesn’t respond in BIOS as well, I strongly suggest you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Keyboard not working correctly in Finder

Hello Everyone,
Lately I have been having a problem where suddenly the letter and number keys stop working in the Finder, but JUST in the Finder. For example, if I make a new folder on the desktop, I cannot rename it, because the letter keys aren't working. I can, however, option-click and drag it to make a copy. I also can ctrl-left click to simulate a right click. All of the function keys (F1-F12) work correctly.
Additionally, the entire keyboard works perfectly in any other program. Right now, as I type, I cannot use these same keys if I clicked into the Finder. A restart alleviates the problem, but only temporarily. It has happened about once a day so far this week, and twice today already. Before this week, it has happened about 3 times, spread out by weeks. Does anyone have any ideas of steps I can take to fix this, or if this sounds familiar to anyone?
I should also mention this is my work computer, and I am on it about 8-10 hours a day.
Thank you in advance for any help or feedback!

reset your finder preferences. delete the file home directory/library/preferences/com.apple.finder.plist. then control-option-click on finder in the dock and choose "relaunch".

F# keys on Apple Wireless Keyboard not working correctly.

Hello everyone,
Today I bought a brand new Apple Wireless Keyboard (the small ones who resemble laptop keyboards), which I'm very glad I bought as some keys on my older keyboard started not working anymore.
I configured the keyboard with bluetooth and it's working just fine, except for one thing:
The F# keys don't work as their respective icons indicate (i.e. If I press F10, F11 and/or F12, the volume isn't affected as it normally should, but instead the keys don't seem to respond, as if I weren't pressing them).
In the Keyboard & Mouse panel in System Preferences, under the Keyboard Shortcuts, I managed to reset the F1 to F4 keys so they work as their respective icons indicate, though I didn't find and don't know how to create any shortcuts to make the volume keys (F10, F11 & F12) work again.
Also, I would appreciate if you could help me out to reset the F7, F8 & F9 keys, which don't work either.
I tried checking and un-checking the "Use the keys F1, F2 and so on, as standard function keys." option under the Keyboard tab, and pressing the "fn" key while pressing the F# keys, but none of those attempts seem to change anything to how the F# keys work.
I don't know what else to do anymore and I would really appreciate some help now.
Thanks in advance for your responses,
Oscar.

Shutdown your macbook.After thats done , switch the wireless keyboard off. Press Shift + Ctrl + Option + Power Key (all together ) and then release together. Start up the macbook and once that's up start up the keyboard.Try now.The keys should work fine.

Programme does not work correctly when built as an application

My programme operates correctly when in development, but when built into an application it fails to function with regard to closing and opening front panels. I am using 'open VI referance' and 'property node virtual instrument Front panel open' to close and open front panel, it is this area that seems to fail.
Do I have to do anything special with VI's that contain Server Functions?
Any help would be appreciated. I am using LABview 5.0 with its Application Builder.
Many Thanks

Hi Dennis,
It is very difficult to understand the problem here.
1. Could you please explain what you mean when you say "it fails to function with regard to closing and opening front panels" ?
2. It may also help if you can attach your program so that I can take a look at it.
3. What is the program intended to do?? I mean, is it some sort of serial application etc.??
I hope to solve your problem soon.
Sincerely,
Sastry V
Applications Engineer

Completion Insight not working correctly when using Enterprise User Security (EUS) logon

This is a pre existing issue we've experienced with SQL Developer, though I've only just worked out what is causing the issue it is present in previous versions of the tool, up to the current 4.0.EA2.
We experience issues with the Completion Insight functionality of SQL Developer.
When we log into a database using Enterprise User Security i,e authenticating against OID, the schema of the database account is prefixed to any reference to public synonyms, ie all user_%, all_%, dba_% and v$% views.
When I change the authentication of the database account back to normal database authentication the schema prefix correctly isn't shown. It simply suggests the synonym name of the views.
An example of this is as follows when attempting to query the DBA_TABLES view:
The database account is ORADBA and has DBA privs.
The EUS user that is mapped to the ORADBA schema is dbutler.
The ORADBA user is configured to authenticate externally (against OID).
I login with my dbutler directory credentials:
If I start typing:
select * from dba_tabl
The object name is suggested as ORADBA.dba_tables
If I change the authentication of the ORADBA account back to database authentication, the prefix is no longer present.
i.e If I start typing:
select * from dba_tabl
The object name is suggested as dba_tables

If you're not using DB 10.2 this is the "expected" behavior for the DB. See also metalink note 351170.1 "Enterprise Users Can Connect to a Database when the OID Account is Disabled"
regards,
--Olaf

Autodiscover not working correctly when Office 365 integrated with Server Essentials 2012 R2

Hello!
This last weekend I setup our server as new and to ease the creation of users, integrated with our Office 365 (which to this point has worked fine) and imported the users. This had a somewhat unexpected side effect in that the import used the email address
as for the user forename and then synced that change back to Office 365 and so needed to enter this information back in on the dashboard which synced back to Office 365. This may or may not have any relevance to our issue below.
I should also point out that we have our own domain name so within the original Office 365 setup we had just one .onmicrosoft.com user with all the rest setup with our own domain name.
At the weekend when it came to the client install, Outlook (2010 or 2013) would fail on the autodiscover with it asking again for credentials but critically displaying a server name of .contoso.com rather than the office365srvr.contoso.com . As I mention,
Office 365 had been operating fine for some time and DNS records where checked and have been set for sometime. I spoke to Office 365 support and after a while come up with a temporary solution (so that I could complete the client installs) of assigning each
user a onmicrosoft address, using that in the new account wizard to pick up the server correctly and then signing in the the Office 365 .contoso.com credentials.
This worked OK to get us past the weekend (although I am having to reset up profiles on quite number of users where they get disconnected but with no credentials box appearing) but isn't a solution. The clients do not see public folders or their archives
and of course we don't want to keep having to reset the profiles.
I'm think that there must be something in the internal network that needs reconfiguring but I don't know what. I have tried pointing the client to an external DNS server just in case the internal DNS server was throwing the autodiscover out but this has
made no difference.

Ah - solved my own problem.
Despite the domain DNS record looking OK and the Office 365 Portal domain checker not highlighting any issue, it looks as though the autodiscover is picking up an imap account provided by the web host.
I've added an alias on the local DNS server to point to the Office 365 autodiscover server and this has solved the problem.

Workflow not working correctly when removing resource attributes

(Comment: I have to say that posting to this forum is a real pita. It takes me upwards of 20 minutes to figure out why various words are not allowed, with no indication of what is wrong. For some reason ba lt im ore is a forbidden word so I replaced it with FirstLocation.)
I have a bulk action script that calls a workflow (below) to remove some locations from a users resource. What is happening is that it loops through and correctly removes 'FirstLocation'. Then it loops through the second pass and correctly removes 'Portland', however, on the third pass, Portland comes back - it's like the removal doesn't take for some reason. Is there something I should be updating differently to get this to remove the locations correctly?
This is the Task Definition:
<Variable name='remLocation'>
<list>
 <s>FirstLocation</s>
 <s>Portland</s>
 <s>Chicago</s>
 <s>Charleston</s>
 <s>Cleveland</s>
 <s>Lynnfield</s>
 <s>Roanoke</s>
 <s>Worthington</s>
 <s>Yorktown</s>
 <s>Hawthorne</s>
</list>
</Variable>
<Variable name='newJustification'>
<s>Obsolete Locations remd</s>
</Variable>
<Activity id='0' name='start'>
 <Transition to='Initialize' />
 <WorkflowEditor x='43' y='10' />
</Activity>
<Activity id='1' name='Initialize'>
 <Action id='0' name='Set variables'>
 <expression>
 <block name='INIT' trace='true'>
 </block>
 </expression>
 </Action>
 <Transition to='Make Account Changes' />
 <WorkflowEditor x='105' y='10' />
</Activity>
<Activity name='Make Account Changes'>
 <Action id='1' name='update lh account'>
 <expression>
 <block trace='true'>
 
 <defvar name='tmpLocMap2'>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref>
 </defvar>
 
 <dolist name='elLoc'>
 <ref>remLocation</ref>
 <block trace='true'>
 <set name='tmpLocMap2'>
 
 <cond>
 <neq>
 <indexOf>
 <ref>user.accounts[FACILITIES].properties.locationMap[*].name</ref>
 <ref>elLoc</ref>
 </indexOf>
 -1
 </neq> 
 <block trace='true'>
 
 <defvar name='objectIndexNo'>
 <indexOf>
 <ref>user.accounts[FACILITIES].properties.locationMap[*].name</ref>
 <ref>elLoc</ref>
 </indexOf>
 </defvar>
 <rem>
 <filternull>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref>
 </filternull>
 <get>
 <filternull>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref>
 </filternull>
 <ref>objectIndexNo</ref>
 </get>
 </rem>
 </block>
 <ref>tmpLocMap2</ref>
 </cond>
 </set>
 <set>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref>
 <ref>tmpLocMap2</ref>
 </set>
 </block>
 </dolist>
 <set>
 <s>user.accounts[FACILITIES].properties.justification</s>
 <ref>newJustification</ref>
 </set>
 <set>
 <s>user.accounts[FACILITIES].justification</s>
 <ref>newJustification</ref>
 </set>
 </block>
 </expression>
 </Action>
 . . . and here's some of the debug code showing what happens:
<dolist name='elLoc'>
<ref>remLocation</ref> --> [FirstLocation, Portland, Chicago, Charleston, Cleveland, Lynnfield, Roanoke, Worthington, Yorktown, Hawthorne, ...truncated...]
<block trace='true'>
 <set name='tmpLocMap2'>
 </set> --> null
 <set name='tmpLocMap2'>
 <cond>
 <neq>
 <indexOf>
 <ref>user.accounts[FACILITIES].properties.locationMap[*].name</ref> --> [FirstLocation, Shelbyville, Portland, Syracuse]
 <ref>elLoc</ref> --> FirstLocation
 </indexOf> --> 0
 -1 --> -1
 </neq> --> 1
 <block trace='true'>
 <defvar name='objectIndexNo'>
 </defvar> --> null
 <rem>
 <filternull>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [GenericObject:FirstLocation, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </filternull> --> [GenericObject:FirstLocation, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <get>
 <filternull>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [GenericObject:FirstLocation, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </filternull> --> [GenericObject:FirstLocation, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <ref>objectIndexNo</ref>
 [<defvar name='objectIndexNo'>]
 <indexOf>
 <ref>user.accounts[FACILITIES].properties.locationMap[*].name</ref> --> [FirstLocation, Shelbyville, Portland, Syracuse]
 <ref>elLoc</ref> --> FirstLocation
 </indexOf> --> 0
 [</defvar>] --> 0 --> 0
 </get> --> GenericObject:FirstLocation
 </rem> --> [GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </block> --> [GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </cond> --> [GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </set> --> null
my comment: At this point FirstLocation has been remd successfully from tmpLocMap2.
<remAll>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [GenericObject:FirstLocation, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </remAll> --> [GenericObject:FirstLocation, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <set>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [GenericObject:FirstLocation, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <ref>tmpLocMap2</ref> --> [GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </set> --> null
</block> --> null
<block trace='true'>
 <set name='tmpLocMap2'>
 </set> --> null
 <set name='tmpLocMap2'>
 <cond>
 <neq>
 <indexOf>
 <ref>user.accounts[FACILITIES].properties.locationMap[*].name</ref> --> [Shelbyville, Portland, Syracuse]
 my comment: the locationMap above shows that FirstLocation was successfully remd.
 <ref>elLoc</ref> --> Portland
 </indexOf> --> 1
 -1 --> -1
 </neq> --> 1
 <block trace='true'>
 <defvar name='objectIndexNo'>
 </defvar> --> null
 <rem>
 <filternull>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </filternull> --> [GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <get>
 <filternull>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </filternull> --> [GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <ref>objectIndexNo</ref>
 [<defvar name='objectIndexNo'>]
 <indexOf>
 <ref>user.accounts[FACILITIES].properties.locationMap[*].name</ref> --> [Shelbyville, Portland, Syracuse]
 <ref>elLoc</ref> --> Portland
 </indexOf> --> 1
 [</defvar>] --> 1 --> 1
 </get> --> GenericObject:Portland
 </rem> --> [GenericObject:Shelbyville, GenericObject:Syracuse]
 </block> --> [GenericObject:Shelbyville, GenericObject:Syracuse]
 </cond> --> [GenericObject:Shelbyville, GenericObject:Syracuse]
 my comment: and here Portland was successfully remd.
 </set> --> null
 <remAll>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </remAll> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <set>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <ref>tmpLocMap2</ref> --> [GenericObject:Shelbyville, GenericObject:Syracuse]
 </set> --> null
</block> --> null
<block trace='true'>
 <set name='tmpLocMap2'>
 </set> --> null
 <set name='tmpLocMap2'>
 <cond>
 <neq>
 <indexOf>
 <ref>user.accounts[FACILITIES].properties.locationMap[*].name</ref> --> [Shelbyville, Portland, Syracuse]
 my comment: but above, when referenced, Portland hasn't really been remd. Why not??
 <ref>elLoc</ref> --> Chicago
 </indexOf> --> -1
 -1 --> -1
 </neq> --> 0
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </cond> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </set> --> null
 <remAll>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </remAll> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <set>
 <ref>user.accounts[FACILITIES].properties.locationMap</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 <ref>tmpLocMap2</ref> --> [null, GenericObject:Shelbyville, GenericObject:Portland, GenericObject:Syracuse]
 </set> --> null
</block> --> null
<block trace='true'> Any suggestions would be appreciated. Thanks much!
Edited by: user12836258 on Sep 7, 2011 10:14 AM
Edited by: user12836258 on Sep 7, 2011 10:15 AM

it is working over there and changing the status also.
But when through workflow same values come, it didnt work
Check the authorizations associated with WF-BATCH user, i feel like it can be a authorization issue, as you were saying that it is working fine from the BOR method and when it is trying to update the same through workflow the workitem is gogin into error state.
Make sure that teh WF-BATCH user is having SAP_ALL

Keyboard not working correctly when texting.

Similar Messages

Maybe you are looking for