Keyboard number pad not recognized through bootcamp windows 7

Running windows 7 through bootcamp, the number pad on my keyboard does not respond.

I had the same thing as you (that my BT mouse & keyboard were working but then after a while they started to act up -mouse freezing on&off, keys sticking-).
In my case the 'before' and 'after' was actually running the setup on the Bootcamp Utility disk that contains all the Bootcamp drivers. There must be a rogue driver on there that messed up my system. I ended up doing a reinstall and only installing the bluetooth drivers (that are also on the same Utlity disk, but in the $WinPEDriver$ folder. This at least worked for me.
However, by doing so I did not get the handy Bootcamp utility in the lower left corner of Windows that allows me to conveniently reboot and switch from Win8 to MacOS. I am trying to figure out if I can install that utility separately without all the drivers being automatically installed as well

Similar Messages

Cisco ISE 1.2 keyboard number pad not working in CLI

I cant get a keyboard number pad to work in ISE 1.2 when accesing via the SSH CLI. NumLock makes no difference and changing settings in my Putty session doesnt make any difference either.
Anyone got any ideas?

Have you tried to ssh into the router and then ssh into the ISE node? Are you running this on a vm or is this an appliance, by any chance is this the UCS appliance, try accessing the console port through CIMC if possible.
Thanks,
Tarik Admani
*Please rate helpful posts*

Wireless keyboard number pad not working

I purchased a wireless keyboard about 4 months ago and realized about a month ago the 9 digit number pad on the right stopped working. Every other button still works just not 1-9. Is there a number lock button that I may have pushed???

What brand and model of numeric keypad are you attempting to use?

Keyboard number pad not functioning!

i dont know what exactly i did, i might have pressed a keyboard shortcut i dont know. im reletively new to macs. my number pad doesnt work at all. it's an apple keyboard. its the side of the far right with all the numbers on it. its the new apple g5 keyboard, i got my imac this year so the keyboard is up to date.
its just the standard, not wirless at all. is there a system prefrence that i can change it back?!!!!????!!!???
responses will be greatly appriciated.

I had a similar problem where my numerical keypad on my Pro Keyboard seemed to stop working. In fact, when I used the numerical keys over there it would 'lock-up' whatever I was doing and I had to call up the Force Quit panel to shake my application free of the lock. (I didn't actually Force Quit the app, just CTRL-OPTION-COMMAND'ed to call the FQ menu up and then closed the menu. This saved me from shutting the app down completely while "releasing" the numerical keypad.)
Thanks to AXL for the tip on Universal Access. Hope my submission here helps anyone else who wonders why their keypad suddenly seems possessed!
Power Mac G4 Mac OS X (10.3.9) 733 MHz, 896 MB SDRAM
Power Mac G4 Mac OS X (10.3.9) 733 MHz, 896 MB SDRAM

Keyboard number pad not working....

I have installed Leopard, and now my number pad won't work. I have looked under System Preferences, and found nothing wrong there. I have the aluminum keyboard that is wired. Anyone have any ideas? Thanks...

I am having the same problem on my 24" imac (late 2006).
My keyboard is a wireless mac keyoard.
All the number keys (0-9), as well as the decimal key do not work. When trying to use these keys in TextEdit or TextWrangler, they actually cause the keyboard to appear to lock up (command-option-esc clears, with no need to actually force-quit anything). The F-keys also appear to continue working.

I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours.

I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!

lan drivers*

My iMac keyboard not responding in Bootcamp Windows 8 with drivers installed

Hi,
I'm using late-2012 27.1 inches iMac and using Apple Wireless Keyboard, I've installed Windows 8 on bootcamp for a long time now, all drivers are working fine, keyboard is also working perfectly. Then one day, I decided to install a new controller driver from a software called DS3 Tool and when I installed the controller driver, the keyboard switches off and not functioning, I went over to the Driver Manager and it says my keyboard is offline, I checked the battery and it is full, i tried restarting, still not functioning, so I tried switch to Mac OSX, the keyboard works flawlessly but in the Bootcamp Windows, it does not. So can anyone help me fix this
Thank you

Please download BC drivers appropriate for your model from Boot Camp 5.1: Frequently asked questions - Apple Support and Boot Camp: Install or repair Boot Camp drivers.

My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized.

My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized. The Device Manager lists it as an Unknown Device. I've tried uninstalling iTunes and reinstalling it, but it had no affect. The odd thing is that our other iPod (160 GB Classic) is recognized on the same computer using the same USB cable. When I plug the ipod in question into another PC, the PC seems to recognize the iPod and lists it in Windows Explorer (iTunes is not installed on this machine). There seems to be something out of wack with this PC/iPod combo. Any thoughts on what I can do to try to resolve this issue? I tried all of the steps listed here, but they didn't help me. http://support.apple.com/kb/TS1538
Any help would be greatly appreciated.

Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

HP DV9291ea Number pad not working after been in for repair

I have a HP DV 9291ea laptop. It is a 17 inch model with a numeric keypad on it. The problem is, when the numlock key is turned on the keyboard number pad get's enables. I recently had the mother board changed by HP/Tarsus. I suspect that they didnt load the correct keyboard profile. They (Tarsus) said that should bring the laptop in and they will fix it (for free). I will do that if no one can help me here, Is there an easy and permanent fix for this problem?
I can temnporarly get around it by doing the following:
making sure the numlock is off.
opening the on screen keyboard (start>programs>accessories>ease of access>on screen keyboard)
a keyboard layout will opens on the screen
I hold down the FN button down on the real keyboard and clicking the nlk button on the onscreen keyboard by using my mouse.
the problem is is i press the numlock key again I will have to go through the whole process again.
Anyone have any idea what could cause this or how to fix it permanently?
If you might have a suggestion, please post it to me....
This question was solved.
View Solution.

This thread's been dead for a few years, but since I had to really search to find the answer to this issue, I thought i'd share what worked for me.
In Win7, go to Start->Accessories->Ease of Access->Ease of Access Center, click "Make the mouse easier to use" and uncheck "Turn on mouse keys".
This fixed my problem on a HP G72 with integrated numeric pad.

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Why wont my shuffle play? Also, my serial number is not recognized!

My shuffle can be connected to my computer fine, I can take songs on and off it. When I disconnect it, plug in my ear buds and hit play, the little green light comes on, but no music comes out. The light does not blink, it is just on. Even when I hit the play/Pause button again, the light stays on. (It always used to blink when it was paused). My ear buds work on other devices, so it is not them. When I tried to get help from apple, they told me they don't recognize my serial number, and yes, I gave them the right one, the one that is in my settings when I plug in the ipod and inscribed under the clip. I have already returned this once, I fear I may have to again, if I can.

Did you ever get an answer to your question? I have the same problem - the shuffle will not play and the serial number is not recognized on the apple website. iTunes recognizes the shuffle and shows the same serial number as what is on the box and under the clip. I have tried restoring the shuffle to factory settings but it still does not play. I tried registering the shuffle (using the model part number) and it says it is registered but it still does not recognize the serial number. I have no idea what to do.

I cannot download updates to Photoshop Elements 9. I get an error message that my serial number is not recognized or eligible. Can you help with this?

I cannot download updates to Photoshop Elements 9. I get an error message that my serial number is not recognized or eligible. Can you help with this?

Hi,
Which operating system are you running on?
What updates are you trying to download?
The last update was 9.0.3 - check by loading the editor and going to Help -> About Photoshop Elements
The last supported Camera raw is ACR 6.5 - check by loading the editor and going to Help -> About Plug-ins -> Camera Raw
Do you have a reason to update?
Brian

I find that I am unable to receive updates. When I try to re-install, the serial number is not recognized. I have a retail, boxed, full-version of PS6.

I find that I am unable to receive updates. When I try to re-install, the serial number is not recognized. I have a retail, boxed, full-version of PS6

Call Apple or an Apple Store in your city and ask them. Or do a Google search.

HD Audio is not working in bootcamp windows in mac mini 2012

HD Audio is not working in bootcamp windows in mac mini 2012

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

FCP Pro Keyboard number keypad not working with Macbook Pro

Switching over to a macbook pro I find my Pro Keyboard number pad has stop working, infact if I try to use it it crashs my computer
any help?

maharitho wrote:
have you tried to repair your permission, and restart mac maybe it works
Kinda hard to do that if the keyboard and trackpad isn't working - don't you agree?
In any event - what were you doing last before your keyboard and trackpad stopped functioning?
Did you do any upgrades to your Macbook?
Have you tried doing a PRAM/NVRAM or SMC reset?

Keyboard number pad not recognized through bootcamp windows 7

Similar Messages

Maybe you are looking for