Keyboard number pad

Is there a way to activate the number pad on my iMac so that I can use it with my windows applications? I am running XP on my intel iMac. Thanks.

Hi and welcome to Discussions,
the NumPad should work while in WIndows.
Have you tried the 'Clear'-key (top left of the NumPad) to aktivate the NumPad ?
Stefan
Message was edited by: Fortuny

Similar Messages

Cisco ISE 1.2 keyboard number pad not working in CLI

I cant get a keyboard number pad to work in ISE 1.2 when accesing via the SSH CLI. NumLock makes no difference and changing settings in my Putty session doesnt make any difference either.
Anyone got any ideas?

Have you tried to ssh into the router and then ssh into the ISE node? Are you running this on a vm or is this an appliance, by any chance is this the UCS appliance, try accessing the console port through CIMC if possible.
Thanks,
Tarik Admani
*Please rate helpful posts*

Disfunctional Keyboard Number Pad

I've been having weird problems with my keyboard's number pad. Initially, it starts off fine when I boot up the computer. However, it eventually starts acting funny. The number keys on it act like num lock is turned off, regardless of it's state. Even the keys for the math symbols don't work. They simply don't do anything. And the plus key acts like the right mouse button in some applications. My keyboard is the Logitech Wave Keyboard, but I'm doubting that's the problem because it's never acted like this before. Also, a few weeks ago, the number pad started acting like Num Lock was in the opposite state.

I haven't seen this problem coming up in a couple days, so I'm guessing it is resolved. Right now, I can think of two possible causes. For one, the problem always (or usually) started when I was using OpenOffice.org, which I haven't been using as much. So it's possibly a bug in OpenOffice. Also, A few days ago I stopped using evdev as my mouse driver, since it had been causing problems with cycling the input events in /dev/input. I'm guessing it was more likely to be caused by driver interference.

10.8.4 and extended keyboard number pad issues

To anyone that has heard of this before. I've checked about every discussion here and I don't know that this issue has been resolved. I recently upgraded to 10.4.8 as most here have done. The odd and annoying thing thats happened now is that my apple wireless keyboard's number pad no longer works; The number 5 key seams to have become related to a left click on the mouse wherever the curser is on the screen, but no other keys work. This problem has also crippled any web browser I use such as Safari or Firefox; meaning that if I attempt to use the number pad in a login field, the mouse can no longer select or move open windows.
My one remedy to all of this has been to open the Force Quit Applications menu and all is well with the mouse again. One last point I can make is that by creating a new user account, all my keyboard and mouse problems go away, and everything acts as it should. I just don't want to have to back up everything and reinstall the system. So my mac faithful friends, please help.
2GHz iMac G5 Mac OS X (10.4.8) 2 GB DDR SDRAM

I found the answer!!!!!
I was looking in universal access under the mouse settings and noticed something called mouse keys. Some how I turned that option on and it turned the number pad into a way of moving the curser multiple directions with the ability to select items by pressing the #5 key. I hope this may help others, I've been stuck with this one for a few days.

Wireless keyboard number pad not working

I purchased a wireless keyboard about 4 months ago and realized about a month ago the 9 digit number pad on the right stopped working. Every other button still works just not 1-9. Is there a number lock button that I may have pushed???

What brand and model of numeric keypad are you attempting to use?

Extended keyboard number pad problem

My stock keyboard numb er pad does not work right. The "=", "/", "+", "-", "*" and "enter" keys work OK. The upper row sound and eject keys work OK
None of the digit keys work as expected. The "." key also does not work.
Hitting the zero digit key locks up my mouse button. Other keys give erratic results.
I have reset the keybaord preferences and reset PRAM many times with no benefit.
I have exactly the same results on both my wired keyboard and the B luetooth wireless Apple keyboard.
I have read other complaints very similar to mine but no solution.
Any ideas?
TIA,
Bill

You may have pressed Option five times, thus turning on "Mouse Keys". You can disable this Option function, and turn off "Mouse Keys" in the "Mouse" tab of "Universal Access" system preference.

Keyboard number pad not functioning!

i dont know what exactly i did, i might have pressed a keyboard shortcut i dont know. im reletively new to macs. my number pad doesnt work at all. it's an apple keyboard. its the side of the far right with all the numbers on it. its the new apple g5 keyboard, i got my imac this year so the keyboard is up to date.
its just the standard, not wirless at all. is there a system prefrence that i can change it back?!!!!????!!!???
responses will be greatly appriciated.

I had a similar problem where my numerical keypad on my Pro Keyboard seemed to stop working. In fact, when I used the numerical keys over there it would 'lock-up' whatever I was doing and I had to call up the Force Quit panel to shake my application free of the lock. (I didn't actually Force Quit the app, just CTRL-OPTION-COMMAND'ed to call the FQ menu up and then closed the menu. This saved me from shutting the app down completely while "releasing" the numerical keypad.)
Thanks to AXL for the tip on Universal Access. Hope my submission here helps anyone else who wonders why their keypad suddenly seems possessed!
Power Mac G4 Mac OS X (10.3.9) 733 MHz, 896 MB SDRAM
Power Mac G4 Mac OS X (10.3.9) 733 MHz, 896 MB SDRAM

Keyboard number pad not recognized through bootcamp windows 7

Running windows 7 through bootcamp, the number pad on my keyboard does not respond.

I had the same thing as you (that my BT mouse & keyboard were working but then after a while they started to act up -mouse freezing on&off, keys sticking-).
In my case the 'before' and 'after' was actually running the setup on the Bootcamp Utility disk that contains all the Bootcamp drivers. There must be a rogue driver on there that messed up my system. I ended up doing a reinstall and only installing the bluetooth drivers (that are also on the same Utlity disk, but in the $WinPEDriver$ folder. This at least worked for me.
However, by doing so I did not get the handy Bootcamp utility in the lower left corner of Windows that allows me to conveniently reboot and switch from Win8 to MacOS. I am trying to figure out if I can install that utility separately without all the drivers being automatically installed as well

Keyboard number pad not working....

I have installed Leopard, and now my number pad won't work. I have looked under System Preferences, and found nothing wrong there. I have the aluminum keyboard that is wired. Anyone have any ideas? Thanks...

I am having the same problem on my 24" imac (late 2006).
My keyboard is a wireless mac keyoard.
All the number keys (0-9), as well as the decimal key do not work. When trying to use these keys in TextEdit or TextWrangler, they actually cause the keyboard to appear to lock up (command-option-esc clears, with no need to actually force-quit anything). The F-keys also appear to continue working.

Wired keyboard-number pad&right arrow keys not working-serial # help!

Hello to whomever reads/replies -
I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
Sharon

Hello sharon:
Welcome to Apple discussions.
Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
Incidentally, it appears to me that your KB is, indeed, broken.
Barry

HP DV9291ea Number pad not working after been in for repair

I have a HP DV 9291ea laptop. It is a 17 inch model with a numeric keypad on it. The problem is, when the numlock key is turned on the keyboard number pad get's enables. I recently had the mother board changed by HP/Tarsus. I suspect that they didnt load the correct keyboard profile. They (Tarsus) said that should bring the laptop in and they will fix it (for free). I will do that if no one can help me here, Is there an easy and permanent fix for this problem?
I can temnporarly get around it by doing the following:
making sure the numlock is off.
opening the on screen keyboard (start>programs>accessories>ease of access>on screen keyboard)
a keyboard layout will opens on the screen
I hold down the FN button down on the real keyboard and clicking the nlk button on the onscreen keyboard by using my mouse.
the problem is is i press the numlock key again I will have to go through the whole process again.
Anyone have any idea what could cause this or how to fix it permanently?
If you might have a suggestion, please post it to me....
This question was solved.
View Solution.

This thread's been dead for a few years, but since I had to really search to find the answer to this issue, I thought i'd share what worked for me.
In Win7, go to Start->Accessories->Ease of Access->Ease of Access Center, click "Make the mouse easier to use" and uncheck "Turn on mouse keys".
This fixed my problem on a HP G72 with integrated numeric pad.

FCP Pro Keyboard number keypad not working with Macbook Pro

Switching over to a macbook pro I find my Pro Keyboard number pad has stop working, infact if I try to use it it crashs my computer
any help?

maharitho wrote:
have you tried to repair your permission, and restart mac maybe it works
Kinda hard to do that if the keyboard and trackpad isn't working - don't you agree?
In any event - what were you doing last before your keyboard and trackpad stopped functioning?
Did you do any upgrades to your Macbook?
Have you tried doing a PRAM/NVRAM or SMC reset?

Apple wired keyboard. Number pad not working with Windows Office 07 via bo

I have a 27' Quad core i7 with windows 7 loaded via bootcamp. i have Office 2007 loaded in the Windows partition.
My problem is that the number pad on my wired apple keyboard does not work in excel or word. The number at the top of the keyboard work fine.
Has anyone found a solution please.
Message was edited by: Fernbergjim

Hi,
does the numpad work in other Windows programs, or is it just the MS Office programs ?
Have you tried the 'clear'-key (the one above the '7'-key on the numpad) to enable the numpad ?
Regards
Stefan

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Number pad not working on keyboard ?

My number pad on keyboard seems to be locked and don't know how to unlock

Hello Joaquinfromhi,
You may need to press the 'Num Lock' button or key on your keyboard, or you may have enabled 'Mouse Keys.'
OS X Mountain Lion: If the numeric keypad doesn’t work
http://support.apple.com/kb/PH10855
Cheers,
Allen

Keyboard number pad

Similar Messages

Maybe you are looking for