Keyboard on messenger not working right. Will only show half of keybrd

How do I fix my keyboard on messenger? It is only showing half of keyboard & it is in the middle of the page. Help

Press and hold the keyboard icon on the keyboard and select Dock.

Similar Messages

  • Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

    firefox will not let me type in yahoo mail as new email. will not pull up contacts. also, when I use wireless printer-it shuts down windows.

    Couple of points...
    DJ_Jynxx wrote:
    The thing is, this MUST be an Audition CC issue for two reasons. One, everything worked fine in CS6, which I was using right before I upgraded to CC. I even did a clean install of it by removing CS6 completely.
    All versions of Audition can co-exist on the same machine quite happily - there is no interaction between them at all, and the system was designed to be like this. So there's nothing to stop you keeping CS5.5, CS6, CC and even Audition3 on the same machine.
    The other thing I'm wondering about is Windows 8. There have been a considerable number of complaints about this doing weird things, including with Audition. I have a system that in many ways is very similar to yours, except that I don't overclock the mobo, and use a professional sound device (or two) with it (RME). The major difference though is that I use Windows 7 pro 64-bit, and I haven't had any of these problems at all. Yes I use it for a living, as well, but I don't bother with multiple DAWs - don't have time for all that these days. But I do use iZotope's RX software in its standalone mode without any difficulty.
    I'm not claiming that  Audition CC is trouble-free - any number of Mac users will confirm that - but people running it on W7 certainly seem to have far fewer problems with it. It may also be worth trying an uninstall-reinstall of CC - you never know. But differences in preview quality certainly point towards audio drivers, I'm afraid...

  • HT201210 when  I plug my Ipad 2 in to charge the a message comes up not charging and will only charge half way 58 percent

    My IPad 2 will not charge over 58 %

    Are you charging it via its wall charger or a computer's USB port ?  Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • K8MM-ILSR Bios 3.7 not work with Sempron64, Only show 512/1mb

    Ok I have K8MM-ILSR, The processor shows Unknown type but it seems to run ok.
    I am running Sempron64 2800, 2x 512mb Patriot cas2.
    The Mobo only recognizes 512 mb of ram on the board, If somone has a solution to fix the problem I would be gratefull for the help.

    3.7 is the latest publis release Bios.
    I have tested both brand new memory sticks, in both ram slots and they both work perfectly.

  • T42 keyboard not working right, HELP PLEASE

    My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
    Message Edited by scottzilla on 12-15-2008 10:05 PM
     Moderator Note; s/n edited for members own protection
    Message Edited by andyP on 12-16-2008 07:57 AM

    It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency.  Not sure if that makes sense.  I'm new to this....  Sometimes the area it will grab can go ...not fast.. but not slow.  Sometimes it's like it's just messed up and literally takes 30 seconds to process each move.  I rebooted my computer and re opened it and it helped a little.  It's not clear what causes it when it messes up and when it doesn't.  Just frustrating.  It's probably user error because I'm so new at Photoshop.   Thanks for your input.   I really appreciate it.

  • My keyboard does not work right how can i fix it

    I have the iphone4 I bought from Verizon about 2 months ago and now my key board will not work right how do I fix this? I have tried to reset factory settings and all of that but it did not work! If I can not fix it my self will Verizon send me a new one ?

        That's a very important component of your phone, tiffanymoyle. Let's see what we can do to get your keyboard back up and running correctly. What issues are you encountering with the keyboard? Do certain letters not register when pressed? Does it make a difference if you turn your phone to function in landscape mode?
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • TS1368 My Itunes match is not working right, it was only able to download 50% of my songs and now I can't play the balance songs.. it's so stupid

    My Itunes match is not working right, it was only able to download 50% of my songs and now I can't play the balance songs.. it has messed up my enitre music library

    Hello Carpathianna,
    No judgment here on the music you listen to, I have that song too in my library. If iTunes is telling you that the song is missing and you purchased it from the iTunes Store, then just delete it from your iTunes library and then download your song again. Check out the articles below for more information.
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Download past purchases
    http://support.apple.com/kb/HT2519
    Regards,
    -Norm G.

  • In google chrome my keyboard does not work, but seemingly only on a particular website....any suggestions?

    my keyboard does not work, but seemingly only on a particular website while using Chrome....any suggestions?
    Using a MacBook  OSX 10.9.2   

    does it work in other browsers?  Also, what website?   When did this start happening?

  • Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

    Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

    Has the unit EVER been jailbroke?
    If "No," first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • Safari 5.1.2 Not working right after install

    Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
    I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
    Please help!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
    In safe mode, test again. Same problem(s) now?
    After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

  • Help, my iPod's not working right.

    Help. I unfortunately downloaded iOS 6.0 to my iPod touch and now it's not working right. I can't listen to anything in the itunes store and a song I tried to download doesn't work on my iPod, yet it works on my computer. Is there anyway to go back to the old OS system I had before this one? Is this happening to anyone else? What can I do?

    You are very welcome!
    It would seem that the problem was that you were not logged into your iTunes account on your device, and logging in fixed it.
    That is great! You did well in your troubleshooting. I'm glad you got it fixed. Sometimes, just messing around with it, trying to figure it out helps.
    As for updating, it would be good to do as I suggested, but I don't know what Apple's next update will hold for our devices. Whether it will fix only some, or all of the problems. So I would say that keeping an eye out, maybe on this forum, for results of the next update, whether or not it helped others, and how much it fixed. It may even take a few more updates for it to come back around to working as it should. Once your device doesn't seem to be full of errors and bugs, (and maybe the Apple forums are full of positive reviews) then you can stop updating. I'm not saying that updates are always bad, it is hard to tell. So if your comfortable with how your device is working, then you can choose to ignore future updates, it's your choice. I don't know when the updates are coming out either, so we are all riding it and seeing how it will turn out.
    You can mark this discussion as solved if you want.
    If in the future you have some questions, you can dig up your notification emails that were sent to notify you of these posts (if you keep them) and navigate back to this discussion and make a post. Because I am subscribed to this post too, so if you do make a post in this discussion, I will be notified.
    I'm glad everything worked out, I am always happy to help.
    Thank you for being precise and clear in your questions and results. (And the great grammar, it's so rare!)
    Sincerely Lt. Leviathan

  • Ultraslim wireless keyboard and mouse not working

    Hi ,  I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
    Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
    I looked online for troubleshooting options, but did not find anything.
    The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
    My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
    can the nano reciever be replaced;
    any other options to troubleshoot;
    any chance that this could be a software problem
    Thanks

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Stuck at login, Keyboard and Trackpad not working.

    I don't know what happened, but this morning, all of a sudden my keyboard and Trackpad stopped working. I have recently upgraded to Lion and ever since had some minor issues here and there, but this is something really new. I suspect the last update did something, but I'm not sure. Thanks to my friend, he let me use his Mac to post this. I'm totally puzzled about what to do. The keyboard works just fine prior to OS X load, I can tell this because when I hold the Option key the boot manger window comes up, but both keyboard and Trackpad stop working during the login phase. I'm confident that this is a software issue, I just don't know how to fix it

    I have found, when this problem exactly occurs. In order to reproduce this problem, click on Apple icon and then Restart, untick Reopen windows when logging back in. After system is restarted the keyboard and trackpad will not work, and the only way to solve this is to manually restart your Mac, by holding down the power button.

  • Remote not working right

    I've had my FIOS about 2 months, put new batteries in remote and it is still not working right.  Some things work fine.  Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit).  What's wrong?
    My second TV set-up is OK.
    Solved!
    Go to Solution.

    netmouse wrote:
    I've had my FIOS about 2 months, put new batteries in remote and it is still not working right.  Some things work fine.  Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit).  What's wrong?
    My second TV set-up is OK.
    Might not even be a remote issue. Have you tried rebooting the box?
    If you do think it's the remote it's still under warranty.
    You can get a free replacement easy within the dvr's menu.
    Here is a page that tells you ways to get a replacement.
    http://www.verizon.com/support/residential/tv/fios​tv/remote+controls/troubleshooting/questionsone/12​...
    Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

  • IPad 2 was updated to latest iOS 7 and has been not working right since. I have tried to do a restore but still continues to go into reboot mode by itself and very erratic. Can no longer trust it. I tried to complain to Apple but have to give them 20 buck

    iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

Maybe you are looking for

  • How to correctly import .mts into FCP with full 5.1 audio

    Well, I've found a couple of solutions to this so far. I'm not sure if this qualifies as a stickie, but it might be useful to others as well. Getting the audio from new consumer video cameras, for example my Sony HandyCam, which have 1080p video, and

  • Adobe CS3 won't install - could classic be an issue?

    I had forgotten I even had classic until this morning on the phone with Adobe Tech Support. Problem is: Adobe CS3 will not install. My case now has been escalated to Tech Level 3, and I am awaiting that call. In other words, many fixes have been trie

  • MSDB in suspect mode.

    Hi, I have mssql 2005 installed and i see that MSDB database is marked as suspect. I almost tried all the steps which are submitted in the forums. 1) I shut down the server, navigating to the directory 'd:\Program Files\Microsoft SQL Server\MSSQL.1\M

  • PNPCE selection screen

    Hi, I have problem in using logical database pnpce. When using the logical database pnpce, it already has it's own default selection screen. The default for the upper block of the selection screen(payroll period) is: reporting period: today What do i

  • IPad 2 is getting very slow after installing iOS8. Is Apple comming with a fix for it?

    iOS8 is making ipad2 extremely slow. I can't work with it anymore. When is Apple comming with a fix?