Keyboard on Satellite Pro A300-10Q is not working

I have a Satellite Pro A300-10Q running XP.
The function keys weren't working so I downloaded Common Module and Hot Key Utility.
After that the touch pad mouse and keyboard stopped working as well.
Please help?

Hello
Who knows what have you installed and what is missing so Ill send you full installation list and pleae install all drivers, tools and utilities following this installation order.
1 Windows XP Pro(SP3) Service Pack3 RTM
2 Sun Java 2 Runtime Environment V1.6.0_06
3 Intel Chipset Software Installation Utility Chipset 8.7.0.1007 (02)
4 Intel(R) Cantiga-GM / UMA Version: 6.14.10.4953
or
4 ATI M82XT, M86 Driver
5 Azalia, Realtek ALC268 Audio Driver Version:5.10.0.5599
6 Realtek 10/100 LAN Driver Version:5.686.103.2008
7 Synaptics Touch Pad Driver Version: 10.1.8.0
8 RICOH R5C833/R5C837 Card Reader Memory Stick 6.0.1.11
SD/MMC 6.0.3.5
XD Picture 6.0.1.13
9 Intel iMSM Driver(Robson) Version: 8.0.0.1039
10 TOSHIBA Software Modem V2.1.77(SM2177ALD04)
11 Motorola ML3054/SM56 Modem Version:6.12.14.3
12 Modem Region Select Utility (for Motorola) V2.2.3.0(RST223MOT03)
13 Intel Wireless LAN Driver V12.0.0.73.0.x32_wCAT
14 Intel Proset Utility V12.0.0.0.6.x32
15 Atheros Wireless LAN Driver V7.6.0.200.0.x32_wCAT
16 Realtek Wireless LAN Driver Version: 5.1116.1226.2007
17 Atheros Client Utility V7.0.1.98.0.x32_wCAT
18 Chicony Camera Software Version: UVC 1.7.193.0508L / 6.2.238.214
19 Presto! BizCard 5 V5.50.02
20 Bluetooth Stack for Windows by Toshiba V6.10.07.2T
21 CIR Port Driver Version:7.1.64.1011
22 TOSHIBA Common Module V1.00.08
23 TOSHIBA Power Saver V7.04.02.I
24 TPSInit V1.0.4.1
25 TOSHIBA Zooming Utility V2.0.0.24c
26 TOSHIBA Controls V3.32.4102
27 TOSHIBA PC Diagnostic Tool V3.2.9
28 TOSHIBA Hotkey Utility V1.00.01
29 TOSHIBA TouchPad On Off Utility V1.00.01
30 TOSHIBA Utilities V1.00.06
31 TOSHIBA Assist V1.03.00upd4
32 TOSHIBA Speech System V1.00.2515
33 TOSHIBA ConfigFree V5.90.09
34 ConfigFree Demo Screen Saver V1.00.07
35 TOSHIBA SD Memory Utilities V1.8.1.3
36 Authentec AES1610 Fingerprint Utility Version: 7.10.1.0/AP 2.1.10.0
37 CD/DVD Drive Acoustic Silencer V1.00.008
38 Proton Pack V3.10.15
If something is missing on Toshiba download page just install next available software.

Similar Messages

  • Satellite Pro A300 - FN Key not working with xp downgrade

    I have just purchased a Toshiba Satellite Pro A300 and downgraded the o/s to XP.
    There is a problem with the FN key on the keyboard, it does not function. I dont know if this has something to do with the xp downgrade?
    Any ideas please?

    If you have downgraded to Windows XP with the Microsoft disk you must install the Toshiba utilities and Hotkey Utility.
    This is necessary for the FN keys in Windows XP so check the Toshiba website for these utilities:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

  • Satellite Pro A300-1EA webcam not working

    Hi,
    About a month ago my webcam stopped working. I tried various solutions and then formatted my hard drive, installing a 32-bit Windows 7 Home Premium. I still can't get the webcam to work. Could you please advise?
    Kind regards,
    Witek

    reinstall the webcam software which you can find on the Toshiba EU driver page...
    this should fix the issue...

  • Satellite Pro A300-1DZ does not find HDD after BIOS update

    Hi everyone,
    I have recently purchased a secondhand Satellite Pro A300 1DZ.
    Put a fresh copy of Windows xp home on it.
    I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
    OH DEAR what a big mistake.
    Now the netbook will NOT start windows.
    So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
    aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
    Could someone please tell me how to fix this? Thank you x

    Hi
    I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
    This is because of the SATA controller.
    You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
    So, youve got two options if you want to install Win XP:
    AHCI mode -> but you have to include SATA drivers
    Compatible mode -> Win XP installation possible without the SATA drivers

  • Satellite Pro A10 - some keys not working with new keyboard

    Hi all
    I hope some1 can help with this
    i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
    i fitted into my other A10 and all keys work so keyboard is fine.
    All works ok with usb keyboard. Had motherboard out all seems ok.
    Any help plz
    chris....
    Message was edited by: widgy

    Hi
    Why do you think that the motherboard is ok?
    Maybe its a keyboard controller issue
    Did you check if the cable was connected properly?
    In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
    Bye

  • Satellite Pro 6100: Fn keys not working

    Hello,
    Ive got a Satellite Pro 6100 notebook. Im having trouble using the secondary function keys (im not sure what they're called!). When I press the function (Fn) button, the light below the F10 button come on as it should, but when i press any of the F buttons i.e brightness up/down, nothing works!
    I had a quick look at some of the keyboard help and troubleshooter in control panel which suggested the driver may be incorrect so i tried looking for an updated driver, but windows said i have the latest driver.
    Does anybody else have this problem with the SP6100? Can it be fixed? If so how?!
    Any help would be great.
    Thanks - Kavi.
    Message was edited by: kavi

    Hi
    Even the Windows said you use the latest drivers, you should reinstall the drivers.
    Firstly remove the Hotkey Utility Emulator for Display Devices from Add & remove programs.
    The reinstall the common modules and Hotkey Utility Emulator for Display Devices.
    Hope it helps pleas let us known if it will work or not

  • Satellite Pro M30 graphics card not working when driver is installed

    Hi all,
    Im having problem with my nvidia Geforce FX Go5200, in a Satellite Pro M30 laptop, (Intel Pentium M processor 1.7 GHz, 512 Ram). This card was working fine suddenly the notebook stops.
    I have formatted the notebook and installed Win XP PRO. After installing the VGA driver I restarted the notebook but black screen started coming up right after the Win XP splash screen appears. The notebook continues to start up but no screen.
    It starts just fine in safe mode. I get my best screen by simply disabling the geforce card or uninstalling the driver. I tried to install a new driver for the VGA from the Toshiba download site but same problem appears. I have also tried updating BIOS but nothing happens.
    Anyone can help me?
    [email protected]

    It is very strange issue. It will be really interesting to know if this happen when you use delivered recovery installations CD.
    Anyway I presume there is some problem with LCD display. In safe mode the desktop is shown in lowers resolution but when OS starts the resolution will be adapted for standard one (1280x800) and obviously there is the problem.
    I am not technician but I recommend you to contact service partner. As far as I know they use special tools and programs for display tests. They can tell you more.

  • Satellite Pro A210 DVD Drive not working - error code 39

    Hi All
    My Satellite Pro A210 dvd drive is not loading.
    When I looked into it it showed an error code 39.
    I tried uninstalling it and reinstalling it but it's still not working.
    Any ideas?

    Hi
    From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
    You can try this workaround:
    Go to device manager and delete the CD/DVD drive from the device list.
    Then go to registry (regedit) and remove the upper and lower filters from the key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    Then reboot the unit and test it again
    I think this should help!

  • Satellite Pro U200: VGA output not working properly when AC adapter was connected

    Hi,
    I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
    thanks in advance

    As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
    The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

  • Satellite Pro M10 Fn-F5 not working after login???

    Im hoping someone can help me. Im totally confused.
    Im running a projector off of a Satellite Pro M10. The Fn-F5 works perfectly all the way up until the CTRL - ALT - DEL prompt. Even at this point I can still Fn - F5 and flip through the settings. As soon as I login the FN - F5 doesnt do anything? I have removed all the monitors, reinstalled the video card with the latest driver and installed the Device Function key utility from the website?
    I am assuming it must be something with the display settings once the user logs in but I cant work it out? I have tried taking the setting down to the basic 16bit and 800 x 600 but it makes no difference?
    Any help or pointers would helpful?
    Thanks
    Mark

    Hi
    Sorry but you posting is a little be confused.
    The FN+F5 combination allows you to switch between display devices. You can choose an external monitor, TV etc.
    If you want to use the FN keys you have to install the Driver for Toshiba Display Devices Change Utility (Display Device Change) and the Hotkey Utilities for Display Devices.
    These both applications are responsible for the correctly usage of the FN+F5 option.
    The display graphic driver has nothing to do with the FN+F5 keys.

  • Why does Satellite Pro A300 not start when the power button is pressed?

    Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
    In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
    Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
    What shall I do to get a normal start procedure?

    When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
    When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
    The same happen on my Satellite A300.

  • Re: Satellite Pro A300 - DVD drawer does not open most of the time

    I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
    Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
    Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
    Can anyone tell a novice what I need to do to sort this out please?

    Have you noticed this when you try to open drawer using eject button in the drawer itself?
    Almost every player has integrated eject button. Can the drawer be opened using this eject button?

  • Cooling fan is not working on Satellite Pro A300

    Hi Everyone
    I was asked by a friend to repair their Satellite Pro A300, as their CPU Cooling Fan had stopped working even during POST bootup and the laptop would overheat and shutdown. So I thought it could one of three things:
    # Fan is clogged with dust or dirt
    # Fan bearing has failed
    # Fan power cable was loose
    So I disassembled the laptop and cleaned the fan/heatsink using compressed air and checked the power connection which was solid, but this did not solve the problem, so I replaced the fan and heatsink with another one that I knew worked from the same model laptop that had a fault motherboard because of the random bios boot-up password bug (out of warranty) but still no joy.
    I am beginning to believe that the fan was perfectly fine rather the motherboards cpu temperature sensor(s) that control the fan activation has failed.
    Am I correct, in thinking that this is basically, irreparable without specialised tools and my friend will have content themselves with turning the system off every hourish or is there something else I am overlooking?
    Thank you, for any help.

    Hello
    Im not a technician but for me it sounds like that fan connector is malfunctioning if you have already replaced the fan and therefore it would be necessary to replace the mainboard
    Thats everything what I can say about this Have a look for second mainboard or notebook where you can get a cheap mainboard. Maybe it works. :)

  • Satellite Pro A300-1A8 Vista system restore not working

    I wanted to use system restore due to attempting to reconfigure administrator rights, its somehow deleted all my shortcuts on my menu and messed about with a few things.
    However when i try to use system restore (i have attempted to use it in safe mode, via cmd promp, both together and normal boot), yet all seem to stay hanging in the same green page where it reads something along the lines of 'system is initialising restore etc' (spending 45 mins on this page before i get fed up and shut down the computer). I have tried using different restore points but the same occurs. It like its not working at all.
    Can anyone help with this please?
    My laptop is a Satellite Pro A300-1A8.

    Hi
    You mean the Vista tool which can be found in (Start button -> All Programs -> Accessories -> System Tools -> System Restore) does not work and you cannot set back the Vista to the early time point?
    Well, usually there is no much to do to restore the OS to the early time point you have to star the system restore tool and have to choose the restore point. Then everything should run automatically.
    If this doesnt work then something is messed up as you said in your posting above somehow deleted all your shortcuts on my menu and messed about with a few things possibly the OS has been messed to.
    Try to clean the OS using the free software for example CCLeaner. I use it too. Its great. Repair and clean the OS and check if its possible to use the system restore tool again.
    I found also this MS page:
    [System Restore: frequently asked questions|http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx#EIEAC]

  • Satellite Pro A300 standby and hibernate functions not working properly

    I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I'm finding this problem:
    Sometimes, (not always: may be it depends on which program is running) when trying to put the computer in stand-by or in hibernate mode, it doesn't stop, but only shuts down the monitor (panel), while the fan goes on running and the power light is green. Obviously, lots of battery energy consumption!
    Then there is no other way of resuming than shutting down the computer by holding down the power button long time... but this is not correct!
    NB: my computer is always connected to a lan, and generally there are some browser windows open when I put it in stand-by mode.
    How can I fix this?
    jomurray

    Generally you are right but the point is that you have said that this issue doesnt happen always but sometimes.
    > Sometimes, (not always: may be it depends on which program is running) when trying to put the computer in stand-by or in hibernate mode, it doesn't stop
    Fact is that some single applications which are running can prevent the execution of standby mode or hibernation mode.
    Therefore if you are running such programs you will have to close it firstly.
    I dont say that this must be done with all applications. ;)

Maybe you are looking for