Keyboard Only Web Browser?

I know firefox has some interesting keyboard-only plugins, but those are pretty slow and I'm mostly a fan of opera. Does anyone know of any Opera plugins that allow me to avoid using a mouse? If not, is there any browser meant for the specific purpose of being able to use only a keyboard?
Please don't say links or lynx . Thanks in advance.

F wrote:
honestly, the /only/ thing vimperator has on opera+keybindings is that i can have a combination of keys go directly to a link, and with opera you sort of have to guide your way down (which really isn't that bad, but still...).
Also you could try using links-hacked, links-g, links, or elinks (or any other terminal-based browsers).
I used to be a big fan of vimperator but I just freaking hate firefox. I'm back with Opera now and i like it even more than firefox+vimperator.
The only thing I dislike about Opera is that it uses Qt, and rapes my cursors. I'm sure there are ways for intergrating it better, but I haven't put in any time with it yet.

Similar Messages

Is Safari the only web browser supported on the iPad?

Just wondering if Firefox works on the iPad or ONLY Safari?

There is no Firefox for the iPad, but there are other browsers available in the App Store (just search for browser) e.g. Atomic Web, iCab, Mercury, Skyfire

Nokia 5500 Web browser - HELP PLZ!

Hi ,
I'm in india and using Nokia 5500 Black model since a month.
I was very happy using it untill a day back the web browser in 'My Own' section suddenly stopped working. When i click the icon, NOTHING happens, no error message and absolutely nothing.
I called up nokia customer care and they told me to reset my phone settings. i did so, and then to my surprose, not only web browser but ALL applications in 'My Own' folder stopped working with same behavior.
Cam please someone help me out as to what i can do to make my phone work as it was before.
Waiting for a useful reply,
Thanks,
Santosh

Hey thanks for the reply, i did that, but no use.
Now when i did it, even the web icon is disappeared.
Is the web browser application available somewhere on net.
Any other way to help!
-Santosh.

Web browser only zooms, will not scroll

Completely new to Palm here. Have had the Pre Plus for a week on Verizon. Having what I think is a minor problem that I can't seem to figure out and it is driving me crazy. I did search these forums and haven't found anyone with a similar problem which concerns me, but I may just be an idiot.
When I go to use the web browser and want to scroll, I move my single finger tip up and down on the screen as Palm instructs. But instead of scrolling, the page zooms in and after that the navigation buttons (forward, refresh) are disabled (touching them does nothing). So the problems I am having are:
1. I cannot scroll. The scrolling gesture only results in zooming.
2. After the zoom, the navigation buttons are disabled.
Anyone run into this? Is it a bug or am I doing something completely wrong or is there a setting somewhere I need to change?
Thanks for any help,
--Chad.
Post relates to: Pre Plus p101vzw (Verizon)
This question was solved.
View Solution.

Tapping on the screen would zoom, and dragging you finger on the screen would scroll.
Are you lifting you finger off the screen while trying to scroll?
Is this occurring on only one particular web page?
If the answer to both questions is no, then you may need to perform a restart from Device Info, select Reset Options, then Restart. You can also clear cookies and cache in the browser under the drop-down menu at the top select Preferences, then choose Clear Cookies, Clear Cache. You may wants to try clearing cookies and cache first before trying the restart.

1.4 Web Browser auto-search doesn't work on wifi only

This issue only started in 1.4 and it's a bit weird. If I'm in the web browser, at the start page and I type something and hit "enter" or choose google (they both ssearch on google) it will either run forever without ever loading google or take a VERY long time before finally loading. The weird part is that if I instead type www.google.com, it goes immeadiately (or any other website) AND if I'm not on wifi it works perfectly AND if I AM on wifi, all other apps connect immeadiately (for example, the twitter app connects immeadiately on wifi). I have no idea what the browser's doing differently on wifi with the auto-search but it does it every time.

Please allow me to clarify... How can you fix the search on the messages? I try to search one of my clients names (a new client that I don't yet have saved in my phone but I know her name) and I type in a name in the search bar and nothing comes up. Is there a way to solve this issue?

When I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

when I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

Did you check the home page setting to make sure that if doesn't have pipe (|) symbols?
See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

No Adobe air app will run Only Flash Web browser....

So I have re-installed Flash Builder So when I try and run a Adobe air app from the Flash Builder It brings up a prompt everytime saying - If the program is already running, close it before attempting to run. When I kill the Adobe Air debugger in the Task manager it pops up again saying If the program is already running, close it before attempting to run.
After waiting a few moments from trying again I get a message: Unable to connect to the Application to fetch profile data. Please try profiling the application again.
With Flash based - web browser apps - they run fine with no issue. How ever its only adobe air - desktop apps that run this way. This is the third time I have installed FB 4.5 on Windows 7 64 bit. last night it was all woprking fine I was able to debug my Flash Application and everything was working - it has been doing this all day.

I had the same issue suddenly today
After hours of scratching my head - and just before re-installing FlashBuilder 4.5 - I found this suggestion
I had an entry in the "mm.cfg" file:
PreloadSWF=C:\Users\<USERNAME>\AppData\Roaming\Mozilla\Firefox\Profiles\9us94hs0.default\e xtensions\[email protected]\chrome\content\flashfirebug\flashfirebug.swf
- I deleted the line and it now works
---- aaarrrrggghhh - wasted time
thanks

I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed

I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed

If you have an internet connection (e.g., Safari works) try here:
iOS: Troubleshooting applications purchased from the App Store

View files in Web browser only, restrict download/edit/copy/print

Can I use the IRM feature (to restrict edit/copy/print) along with Web Apps (to view the file in web browser only)?
Will this ensure restricted download?

try these links:
http://www.msexchange.org/blogs/patricio/get-news/irm-information-rights-management-features-and-limitations-using-office-web-apps-premise.html
http://searchwindowsserver.techtarget.com/tip/Protecting-SharePoint-2010-document-libraries-with-IRM
http://blogs.technet.com/b/office_web_apps_server_2013_support_blog/archive/2014/03/12/irm-information-rights-management-features-and-limitations-using-office-web-apps-on-premise.aspx
http://blogs.office.com/2012/11/09/whats-new-with-information-rights-management-in-sharepoint-and-sharepoint-online/
https://support.office.com/en-in/article/Apply-Information-Rights-Management-to-a-list-or-library-853f009c-1cc3-4e57-8260-48c80837f506

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

Web-browser only display Summary Status and no menu for configing

Guys,
I have 4 Cisco Aironet 1140. I open a web browser IE 8 and type their address "http://<ip address>". Then I enter my username and password in the browser and successfully login to the access point.
But, There is something strange, why I only see Summary status of my access point after the login process success??? I can't config anything...
I add a new username and use highest privilage, but the result still the same. Same unusual web display, only displaying summary status of the access point, I can't config ssid, vlan, etc.
Here's my configuration:
username Zicco privilege 15 password 7 123A551A02055F106B
username Bl4st privilege 15 secret 5 $1$UJom$UoNBR07HmSGXdoxTUR1W40
ip http server
ip http authentication local
no ip http secure-server
Is there any configuration command that must be added? Please help me.
Thank you

Hi George, today we solved the problem. With adding this command: "config(terminal)#ip http authentication local" all of 5 access points now able to managed via web browser.
Sometimes, we can use access point's web browser without adding this command. But in my cases, only using command of"ip http server" isn't enough. You must add "ip http authentication local" command to your configuration. I dont know why.
And we must have at least one: username <username> privil 15 pass <password> that is full privileged user to use as username and password logon in your access point browser. Otherwise we can't logon to our access point.
Thank you George, I appreciate your kindness. Regards

WAP 561 Web Browsing only

I am looking for some help configuring a Cisco WAP 561 to only allow web browsing. Currently, I am able to configure an ACL deny specific ports. I set the rules to deny the ports and the last rule allows everything. This works ok, but I can only configure 10 rules.
I would rather set it to only allow port 80 and 443. Is there a way to do this? If so, i'm having no luck figuring it out.
Also, the WAP561 does not have a command line interface. Only web configuration.
Below is what I have configured. I am denying share drives, remote desktop, and some specific internal IPs.
<acl name="GuestAccess">
<acl-type>ipv4</acl-type>
<in-use>1</in-use>
</acl>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>tcp</protocol>
<dst-port>135</dst-port>
<index>19</index>
<commit>3</commit>
<rule-index>1</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>tcp</protocol>
<dst-port>445</dst-port>
<index>20</index>
<commit>3</commit>
<rule-index>2</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>udp</protocol>
<dst-port>137</dst-port>
<index>21</index>
<commit>3</commit>
<rule-index>3</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>udp</protocol>
<dst-port>138</dst-port>
<index>22</index>
<commit>3</commit>
<rule-index>4</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>tcp</protocol>
<dst-port>3389</dst-port>
<index>23</index>
<commit>3</commit>
<rule-index>5</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>ip</protocol>
<dst-ip>192.168.24.16</dst-ip>
<dst-ip-mask>0.0.0.0</dst-ip-mask>
<index>24</index>
<commit>3</commit>
<rule-index>6</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>ip</protocol>
<dst-ip>192.168.25.164</dst-ip>
<dst-ip-mask>0.0.0.0</dst-ip-mask>
<index>25</index>
<commit>3</commit>
<rule-index>7</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>permit</action>
<every>yes</every>
<index>26</index>
<commit>3</commit>
<rule-index>8</rule-index>
</rule>
<acl name="GuestAccess">
<acl-type>ipv4</acl-type>
<in-use>1</in-use>
</acl>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>tcp</protocol>
<dst-port>135</dst-port>
<index>19</index>
<commit>3</commit>
<rule-index>1</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>tcp</protocol>
<dst-port>445</dst-port>
<index>20</index>
<commit>3</commit>
<rule-index>2</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>udp</protocol>
<dst-port>137</dst-port>
<index>21</index>
<commit>3</commit>
<rule-index>3</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>udp</protocol>
<dst-port>138</dst-port>
<index>22</index>
<commit>3</commit>
<rule-index>4</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>tcp</protocol>
<dst-port>3389</dst-port>
<index>23</index>
<commit>3</commit>
<rule-index>5</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>ip</protocol>
<dst-ip>192.168.24.16</dst-ip>
<dst-ip-mask>0.0.0.0</dst-ip-mask>
<index>24</index>
<commit>3</commit>
<rule-index>6</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>deny</action>
<protocol>ip</protocol>
<dst-ip>192.168.25.164</dst-ip>
<dst-ip-mask>0.0.0.0</dst-ip-mask>
<index>25</index>
<commit>3</commit>
<rule-index>7</rule-index>
</rule>
<rule>
<acl-name>GuestAccess</acl-name>
<acl-type>ipv4</acl-type>
<action>permit</action>
<every>yes</every>
<index>26</index>
<commit>3</commit>
<rule-index>8</rule-index>
</rule>

Hi Shane,
Thank you for reaching the Small Business Support Community.
Notice there is an implicit “deny” at the end of every ACL, so what I suggest doing is just create one ACL with two rules; to “permit” TCP 80 and 443 respectively where the implicit “deny” will block everything else. Something like this:
Just in case please refer to the admin guide, page 111, for details;
http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap5x1/administration/guide/WAP551_561_admin_guide.pdf
Please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Keyboard shortcut does not work on first slide in Web Browser

I'm using a workbook to learn Captivate.
I added a keyboard shortcut, the Enter key, to buttons on the first and second slides.
When I preview the project in Captivate, the shortcuts all work.
When I preview the project in a Web Browser (specifically Firefox 3.6.16), the shortcut does not work on the first slide, but does work on subsequent slides.
Any ideas why this would happen?

Welcome to our community
The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
It forces the user to click to proceed
It keeps the first slide paused until the user is ready
Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

My macMini has only a 1.5 GHz Intel Solo Core and is now unable to do things like Turbo Tax. I use it mainly for email, web browsing, bill paying, banking. Should my next purchase be a notebook, laptop, mini or iPad?

My macMini has only a 1.5 GHz Intel Solo Core and is now unable to do things like Turbo Tax. I use it mainly for email, web browsing, bill paying, banking. Should my next purchase be a notebook, laptop, mini or iPad?

Desktop: Mac Mini dual-core i5 (or quad i7 if you can afford it, it might seem overpowered but it will last you longer. Upgrade to 16GB RAM if you want to future proof that side of the machine. Don't buy from Apple, install it yourself).
Laptop: MacBook Pro 13' if you don't need portability, or MacBook Air 11' if you do (as RRFS has said).
A notebook and a laptop are the same thing.

I need an Ipad app web browser that will emulate internet explorer as my MLS real estate system only uses internet explorer. Why is Atomic full version not available in the app store is there another browser that will do this

I need an iPad app web browser that will emulate internet explorer as my MLS real estate system uses only internet explorer. Why does Atomic no longer sell the full verison. What web browser can I use?

Probably none. It's very possible that the reason the MLS required Internet Explorer is that they use technologies (such as Active-X) that are proprietary to Microsoft and so would not be available from the iPad even if a browser will report itself as being Internet Explorer.
You can try iCab Mobile, though, and see if it will work for you:
http://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8
It has the ability to identify itself as other browsers, so if the site is only blocking other browsers and not depending on IE's technology, iCab might work. There could be problems, though, even if the site lets you in.
Hope this helps.

Keyboard Only Web Browser?

Similar Messages

Maybe you are looking for