Keyboard Pairing On Every Reboot
Hi,
I know there are a LOT of similar posts on this but I can't seem to find one that addresses the issue of the OS requesting I pair the keyboard after every reboot. I have the logitec edge and it works beautifully once set up. I have to press the discover button and re-pair every time, though. I know, I could have bigger problems but it's still a big of a nuisance. The magic mouse paired on first boot up and never needed to be repaired after a reboot.
Thanks for any help you can provide.
Perhaps you misconstrue my suggestion.
I am not suggesting to install grub which the user has done and I assume he corrects the grub failure at boot prompt in order to boot. If he does this, the grub will be corrected for that boot-up only and will fail when rebooting.
My advice was to fix the /etc/boot/grub entry while he is booted to reflect the same fixes he made in order to boot.
Perhaps I have misinterpreted what the user meant when he skipped all the details and reported that grub would fail upon reboot every time.
Thus, grub repair entries at prompt do not become permanent until /etc/boot/grub has been modified accordingly.
Last edited by lilsirecho (2010-07-31 15:41:27)
Similar Messages
-
Regular Kernel Panic after every Reboot
If anyone understands all this please help me shed some light on this KP situation after every reboot...
Thanks in advance!!!
Dump as follows: -
Interval Since Last Panic Report: 368538 sec
Panics Since Last Report: 3
Thu Mar 14 19:42:06 2013
panic(cpu 0 caller 0xffffff8007ab7bd5): Kernel trap at 0xffffff8007b0fd84, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000000e0, CR3: 0x0000000009859001, CR4: 0x00000000000606e0
RAX: 0xffffff8028d43808, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000002
RSP: 0xffffff81f7753b20, RBP: 0xffffff81f7753b20, RSI: 0x0000000000000001, RDI: 0x0000000000000000
R8: 0xffffff8007ee6f3f, R9: 0xffffff800b2cae90, R10: 0xffffff81d8b36000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8028f575d0, R14: 0xffffff8028d43808, R15: 0x0000000000000002
RFL: 0x0000000000010246, RIP: 0xffffff8007b0fd84, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000000000000e0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81f77537c0 : 0xffffff8007a1d626
0xffffff81f7753830 : 0xffffff8007ab7bd5
0xffffff81f7753a00 : 0xffffff8007ace4ed
0xffffff81f7753a20 : 0xffffff8007b0fd84
0xffffff81f7753b20 : 0xffffff8007d10152
0xffffff81f7753b60 : 0xffffff8007d156d1
0xffffff81f7753b90 : 0xffffff8007d15618
0xffffff81f7753c00 : 0xffffff8007d189fc
0xffffff81f7753c30 : 0xffffff8007b120af
0xffffff81f7753c60 : 0xffffff8007af18d3
0xffffff81f7753cb0 : 0xffffff8007af1021
0xffffff81f7753cf0 : 0xffffff8007af151a
0xffffff81f7753d70 : 0xffffff8007d05cfa
0xffffff81f7753dd0 : 0xffffff8007af9ff2
0xffffff81f7753e20 : 0xffffff8007af296a
0xffffff81f7753e60 : 0xffffff8007d650ee
0xffffff81f7753ed0 : 0xffffff8007d71b52
0xffffff81f7753f50 : 0xffffff8007de182a
0xffffff81f7753fb0 : 0xffffff8007aced33
BSD process name corresponding to current thread: launchd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000007800000
Kernel text base: 0xffffff8007a00000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 37921137367020
last loaded kext at 10959037157572: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f89d84000, size 16384)
last unloaded kext at 11036672774831: com.apple.driver.AppleUSBAudio 2.9.0f6 (addr 0xffffff7f891fe000, size 266240)
loaded kexts:
com.focusrite.driver.usb2audio 1.4
com.serato.usb.kext 2.3.0
com.rogueamoeba.InstantOnCore 6.0.2
com.rogueamoeba.InstantOn 6.0.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.filesystems.ntfs 3.10
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleBacklight 170.2.3
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleRAID 4.0.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIUpAdapter 1.2.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.CoreStorage 274.7
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Network Service: VLAN (vlan0), Ethernet, vlan0
PCI Card: pci1b21,612, sppci_ahci, Thunderbolt@107,0,0
PCI Card: pci1b21,612, sppci_ahci, Thunderbolt@10,0,0
Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB
Serial ATA Device: APPLE SSD TS256C, 251 GB
Serial ATA Device: OPTIARC DVD RW AD-5690H
Serial ATA Device: WDC WD20EARX-00PASB0, 2 TB
Serial ATA Device: WDC WD20EARX-00PASB0, 2 TB
Serial ATA Device: WDC WD20EURS-63S48Y0, 2 TB
Serial ATA Device: WDC WD20EURS-63S48Y0, 2 TB
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Serato Scratch LIVE(c)2004, 0x13e5, 0x0001, 0xfa130000 / 6
USB Device: PTK-540WL, 0x056a (WACOM Co., Ltd.), 0x00bc, 0xfa120000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Scarlett 18i6 USB, 0x1235, 0x8004, 0xfd130000 / 6
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd140000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd142000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3The following may work for you as a shortcut to testing, instead of fully uninstalling each of those programs. It may also fail for some, but that's the worst that will happen, and it may save you a lot of time.
For any of the possible culprit kernel extensions, it is not necessary to completely uninstall the parent program.
You can temporarily uninstall any .kext, which may be causing the problem, by doing the following: Open Terminal in Applications>Utilties and copy/paste
sudo kextunload
Important, leave a space after kextunload
Next, navigate to the /System/Library/ and select Extensions. Inside that folder, find the related .kext in question, which you should drag into the Terminal window. (After dragging it in, the file will stay where it belongs in its original location.) This will automatically fill the Terminal window with the name and path to the file.
This is an example only of what the full command will then look like; it will not necessarily be found on your computer.
sudo kextunload /System/Library/Extensions/PaceSupportFamily.kext/
Hit return. If you have never used the sudo prefix before, you will get a warning, which you can disregard. Then enter your admin password, which you won't see on the screen as you type it in and hit return. Wait for the $ sign prompt to reappear, which will indicate the extension has been unloaded. Then just close the window.
This will have the effect of disabling the program. If it fails to be the source of the problem, to reload/enable it, substitute kextload for kextunload, using the above procedure.
Other than that, have a look at this article on resolving kernel panics. Faulty RAM is a frequent cause.
http://www.thexlab.com/faqs/kernelpanics.html -
Apple Aluminum Keyboard slow responding after reboot
I have Leopard installed on my external firewire drive, and 10.4.1 installed on my PowerBook. Whenever I boot from one to the other I get a very slow response from my new Apple Aluminum Keyboard and my USB trackball. I have the trackball connected to the keyboard's USB port and the keyboard is plugged directly into the PowerBook. When I boot into either system it takes a good five minutes before the keyboard and trackball respond. In the meantime I have to use the keyboard on the PowerBook and the trackpad to login, etc... I also have USB Overdrive installed on both systems, but this problem developed before I installed USB Overdrive in Leopard. Any clues?
Does this new keyboard pair fine with the other computer?
I can only think of two other things given the troubleshooting that has been done so far.
This may be an OS issue (Reinstall the Mac OS) or something in or around your setup is generating interference: http://support.apple.com/kb/HT1365 (doubtful as you said you used another computer and it was fine in the same area).
If you have already contacted AppleCare and the replacement keyboard did not resolve the issue you might want to give them a call back to follow-up so they can investigate the issue further. -
Have to reinstall Flash after every reboot.
Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS up to date - ESET Smart Securty 4
I get prompted to install new version of Flash after a reboot, so it happens at least once a day.
I install Flash and it installs just fine and works until the PC boots up again.
I tried some of the following:
- Use Adobe Flash Uninstall program before installing
- Using standalone install program
- Checked ActiveX Filter and it was off...turning it on causes
this same behavior, but the problem I have has nothing to do with the filter
Not sure when this started, but the user didn't have this problem until recently.
I am using ESET Smart Security 4. On all our systems, and his PC is the only
one that is having a problem. Need some pretty hard evidence before I bother
with uninstalling ESET just to see if that would help.
The part that is really strange...if I go to manage add-on's while it is working,
I see the Flash player there and Adobe's name there and that it is enabled.
After I reboot and go into the add-on manager, Flash is still there and still
enabled, but it now says "Unknown" instead of "Adobe" and is no longer
listed near the other Adobe programs. But then, when I reinstall it, that gets
"fixed" and now says Adobe again. So it almost seems like an IE9 problem
and possibly a corruption problem. No known problems with the PC. I suppose
that reloading the PC from scratch would fix the problem...at least I hope it would,
but I'm also not ready to do major surgery if there is an easier fix.sorry no hablo ingless
Date: Fri, 14 Oct 2011 22:39:15 -0600
From: [email protected]
To: [email protected]
Subject: Have to reinstall Flash after every reboot.
Re: Have to reinstall Flash after every reboot.
created by ʇɐb ɹəuəllıʍ in Using Flash Player - View the full discussion
I also downloaded that Nirsoft tool, and on my (64-bit) system I also only see the ocx and exe registered. But everything works well on my system. So I currently have no other ideas. Hopefully someone from the Adobe team will have a look at this topic.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3972457#3972457
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3972457#3972457. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Using Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Wireless keyboard paired will not function ?
Wireless keyboard paired with my iPad suddenly will not function - anyone help?
Hello:
It may or may not help, but try resetting the PRAM and SMC.
Barry -
Apple Wireless Keyboard pairing delay
Hi. I have a first generation Mac Mini with a D-Link DBT-120 (http://www.dlink.com/products/?sec=0&pid=34) Bluetooth adapter and an Apple Wireless Keyboard. When I turn on the computer and I'm going to type my password, it take like 3-4 minutes for the computer to recognize the keyboard (I turn on the keyboard in the moment I turn on the computer). After that, the keyboard works perfectly. I would like to know if there's any way to make the pairing of the computer and the keyboard faster. I know it's probably just a detail but it's a bit annoying.
Thanks.
Santiago.I have a keyboard that I had previously (successfully) paired with my iPad 2. I haven't used them together in a long time.
I have been trying to pair the last 1-2 days and have had no luck. Most of the time the iPad doesn't detect the keyboard from the Bluetooth Settings. Occasionally it will detect, but when I click it to pair it will take awhile and then simply alert "Pairing Unsuccessfull".
The light on the keyboard indicates to me that it's paired (3 seconds of green and then off - as opposed to the flashing which indicates it's unpaired). I put in fresh batteries. I know it's working because I can turn on Caps Lock.
Any ideas? Any way to reset the keyboard so as to start more from scratch? I don't have a PIN in my Apple keyboard manual. If I recall correctly, last time the iPad asked me to enter a confirmation code on the keyboard and hit enter.
I'll have to check out the pair of links (Using and Troubleshooting) but I think I've tried everything I found in them.
My computer died and now I'm waiting for my new Macbook Pro. Need my keyboard paired with my iPad to stem the tide! -
Prevent the Internet Security Suite from scanning after every reboot
My Verizon Internet Security Suite is evidently set to scan everything after every reboot of the computer. My computer is rather slow anyway. But that ties up all the resources for about 15 minutes whenever I reboot the computer. It keeps tabs on things in real time. It's not necessary to scan after every reboot. Can I turn that setting OFF?
Hi Hermhart, Yes there should be an option to set that to off. try this link to see if this helps & let us know thanks Brett.
http://www22.verizon.com/ResidentialHelp/FiOSInternet/General+Support/Essentials+And+Extras/Question...
Brett
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. -
my new kitten jumped on my keyboard and now every command i perform on my computer is heard audibly. does anyone know how to turn this function off?
Chateaux Bleu wrote:
my new kitten jumped on my keyboard and now every command i perform on my computer is heard audibly. does anyone know how to turn this function off?
I don't know how to turn off a kitten (I would probably get the Nobel prize if I did!) but Pierre is correct, although his target is wrong:
System Preferences/Universal Access/Seeing - turn off VoiceOver. -
This happened yesterday, 8/24/2011 after downloading Apple iTunes 10.4. In Win 7 64bit I get the following error upon every reboot. "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Please how do I fix this, Thanks.
In the case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
"Application opened for the first time" warning after every reboot
Hello, I have a problem with Lion 10.7.5. The system does not remember that I already opened applications before. After every reboot, every time I open an application it displays the warning as if it's the first time I'm opening it. Anyone knows how to solve this problem?
Thanks in advance for your help.In my case, the problem disappeared after I installed the 10.7.5 supplemental update.
-
Server stucks at Applying Computer Settings after every reboot
Hello!
On one of our sites containing around 15 servers, whenever a terminal server is rebooted, it gets stuck on Applying Computer Settings for around 15 minutes. If it is un-joined from the domain then no issue. Moreover, once it is done with this delay, no time
delay is observed in user login. But after every reboot, 15 - 20 mins delay is always observed. Domain is the same at other sites and no issue is being observed else where.
OS: MS Windows Server 2008R2
Help RequiredHi,
Thank you for posting in Windows Server forum.
In addition, for a test please try to modify the behavior of HTTP.SYS to depend on another service being started first. To do this, perform the following steps:
1. Open Registry Editor
2. Navigate to HKLM\SYSTEM\CurrentControlSet\Services\HTTP and create the following Multi-string value:
DependOnService
3. Double click the new DependOnService entry
4. Type CRYPTSVC in the Value Data field and click OK.
5. Reboot the server
NOTE: Please ensure that you make a backup of the registry / affected keys before making any changes to your system.
More information.
KB 2004121
Hope it helps!
Thanks.
Dharmesh Solanki -
Sound Card changes after every reboot
Alright, I've had this little issue since I installed Arch on one of my computers. After every reboot, the sound card changes and I have to manually edit my .asoundrc to get sound. It's not a huge deal but it is very annoying. How do I prevent my system from switching my sound card?
This the output from aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: STX [Xonar STX], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: STX [Xonar STX], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm trying to keep the Xonar STX as the default card.thatnewyorker wrote:
skunktrader wrote:
On my machine I have the following in /etc/asound.conf
pcm.!default {
type hw
card XFi
ctl.!default {
type hw
card XFi
Yeah that didn't work. I get a message about .asoundrc being old or corrupted so Alsamixer basically ignores it.
I assume you changed the 'XFi' (my preferred sound card) to 'STX' -
Reinstalli​ng Audio drivers after every reboot
Hi,
I have a P750 PSAY3A-02J001 which i gor in australia.
Recently I had to buy a new hard drive (as the old was scratched) and have windows 7 reinstalled. This was done in England.
After this I then restored from my external Hard drive.
After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
After every reboot I have no sound when playing movies etc and have to reinstall the drivers again.
I have saved the folder on my desktop (for ease to reinstall every time) however Im wondering if the Laptop is not starting up this driver or its being saved in the wrong spot? any way to fix this?
Also I was attempting to use the Toshiba doanloads section to update everything however under my Model P750 there is no PSAY3A-02J001 (my model doesnt seem to exsist?)
Many thanks in advanceSatellite P750/02J (PSAY3A-02J001)
You didn't find your machine listed here because this site is only for US computers.
Downloads for your Aussie model are here.
After this I then restored from my external Hard drive.
Please tell us all about that backup image. Exactly which application are you using?
After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
What is the make and specific model of the new hard drive? If it uses advanced-format technology, that may be the source of the trouble.
-Jerry -
Can I restore the computer after every reboot?
Hi!
I am renting a place for weekend getaway and would like to provide a fully working iMac. That said, I don't want every week to go there and fix the mac if something go bad or user mess up the computer, install virus and such.
I stayed at the DoubleTree Hilton Hotel in Amsterdam. They had an Imac in the room that, at every reboot, wiped out what you had done and went back to your initial state.
That is EXACTLY what I am looking for with minor tweek. I would like to be able to remote-trigger the restore via the web. The process need to be virus proof.
Any super wiz can walk me trough how I can do such a thing on my iMac? I am ready to pay for consulting if needed.
And if by any chance you know a software that also do it for PC, please tell me as I include a 3x 27 inchs screen / SSD Raid-0 fully rig gaming pc in the weekend rent. =)
Bests!
- Andrea
PS: Sorry for my english.Thank you!
But the Guess account can be wipe automatically? How about if they install and app? Or install documents on the harddrive?
I need to clean all that, no one knows what they will leave on the computer and the next person to rent the place could have some surprise. =)
On the DoubleTree, I wasnt limited to install my app and do my work, wich was great. But as soon as I reboot, everything was gone. (Ram disk??)
- Andrea -
Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10
After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot. I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected. If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot: MultiFinger Gestures (selected) Scrolling (deselected) Tapping (selected) Buttons (selected) After change manually and saved:
MultiFinger Gestures (deselected) Scrolling (deselected) Tapping (deselected) Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!) Can anyone suggest a fix?Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy.
Summary:
1.) Uninstall the Synaptics Driver
2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930
3.) Go to Settings, Update & security, recovery, advanced start [restart now]
4.) Click troubleshoot, advanced options, startup settings [restart now]
5.) Press the number 7 to disable driver signature enforcement
6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php
7.) Reboot the computer if necessary.
8.) Configure your mouse settings to your liking.
Maybe you are looking for
-
Error --while uploading document in solar01 Project documentation
Dears, We have created a imp project in solman and I have full authorization of solar01,solar02,solar_project_admin.Now when I go to project documentation->Add document and click on upload documement, It gives error: "No authorization to upload docum
-
Does anyone know how to recover songs that itunes has "lost"? I downloaded them, synced my ipod, songs were added and I was able to play them. On a recent sync the songs are suddenly "not found" according to itunes. I can't locate them in the itunes
-
How to change color quality \ depth ?
Hi How to change my color setting from 16 \ 24 \ to 32 bit ? because when I`m entering supportdetais.com color depth shows 24 bit only !!
-
I am new to the oracle platform and wanted to learn more about the intermedia capabilities. In particular, I am looking to create a database containing images and text: nothing too heavy, about 40-70 of these types. Can anyone suggest a good tutorial
-
Using Ilustrator CS5 svg files animated in Hype 1.5.2 (previews perfectly in browsers) placed in Dreamweaver CS5 HTML page (again previews perfectly in browsers) and uploaded do not show at all online. What is the problem?