KeyBoard Problem HP Notebook 2000 PC

Im not quite sure where to put this but hopefully someone can help. Last night I was on my Hp notebook 2000 laptop pc and it was working perfectly fine but today I hadent gone on it all day and wanted to go on it. So everything loads up correctly and than i type in my password and go onto Youtube. So im watching a video and notice the volume is at 0 so i press the key to up it. I didmt notice anything till the video stopped playing. I was on Airplane mode for some reason. So i try to un press it and then up the volume same thing. So I thought maybe something glitched and i should shut off my laptop and try again. Everythibg loads up fine but i get to the password and i press the letter "T" I get see 5 black dots instead of 1. I try to back space it just adds another dot. So I use the on screen keyboard and use it to log in. I click on my browser Firefox I go to type in a letter I get basically a jumble of letters and this is happening to all of them. I try to backspace it gives me "/". So im confused as what to do to fix it. I didnt mess with it or damage it, it was working fine yesterday. Can someone please help me and try to give me details of this problem and how to fix it.

According to the message you have recently posted I would like to confirm that this is a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Similar Messages

  • Re: rollover keyboard problem with a Presario C769US

    This Presario C769US  OS Win7 Home 32 bit works just fine except for 1 game that I play a lot away from home.  Like if I have a few hours to kill before a meeting starts.  This older games are simple to play using just the keyboard.  So I don't have to lug around cd/dvd's,  joysticks and manuals.  
    1 game Bio Menace requires certain keyboard cmd's to be entered during game play in order to turn the cheat menu on.  1st  C+A+T   then C+O+D  >  a box opens up and type in 91827 then hit enter.  (Here is were the Rollover cmd error starts)  I next press and hold J+I+M wait a 1/2 second then press space bar.   Then let up all 4 keys at the same time.  If timming is correct The cheat menu pops up.  I checked the keyboard with a keyboard testing prog.  When I press J+I+M everything works fine.  But holding J+I+M down and pressing space bar,  The space bar just doesn't get seen as been pushed.  This is the 2nd laptop that I got.  The 1st one an Acer one laptop had the same kind of keyboard problem.  Now my primary home computer is a Gateway laptop model MD2614U  OS win7 32 bit and that big old Toshiba M60 laptop (before the screen croaked)  is the one I carryed in my backpack.  Now the Gateway laptop and the Toshiba laptop both could handle the J+I+M then space bar cmd with no problems.    Is there any way to fix this rollover problem in the Presario laptop?
    Steve

    Hello @reble1,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the keyboard keys on your notebook computer are not working, and I would be happy to assist you in this matter!
    To return the functionality to your notebook's keyboard, I recommend following this document on Notebook Keyboard Troubleshooting (Windows 7). This should help configure the keys on your keyboard for proper use.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HP ProBook 4720s - Keyboard problem

    Hello all,
    Recently I've bought HP Probook 4720s, and sometimes keyboard stops working normally, some buttons not print on the screen (in any editor, notepad or ms word etc)
    For example, if I print 10 times button "1" then "enter" in notepad, and repeat that several times, result will be:
    111111111
    1111111111
    111111111
    111111111
    1111111111
    111111111
    1111111111
    1111111111
    PC system is Windows 7 Ultimate, BIOS is 16/09/2010, same problem occurs in Safe Mode.
    Link to video with problem demonstration: http://www.youtube.com/watch?v=zAFDb9HqEzs
    Could anyone help me?
    Thanks!  
    Actually issue described: http://h30499.www3.hp.com/t5/Notebook-HP-Compaq-Armada-EVO/HP-ProBook-4720s-Keyboard-problem/td-p/23...
    Maybe here HP support can provide with some solution! Thanks.

    Is the unit under warranty?  The warrant status can be checked here:
    http://www13.itrc.hp.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475
    ________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

  • Pavilion g6 keyboard problem

    When I press the letter O random other letters come into the text and also letter L. Sometimes it will just open a new tab. I cannot log in as myself or administrator because of it. Have tried cleaning keyboard and a hard reboot but this hasn't worked. Any other suggestions would be gratefully received. Thank you

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are having issues with the Keyboard on your Notebook.
    We will surely assist you with this.
    Let’s start with a questions:
    1. Was there any liquid split on the Notebook Keyboard
    2. Is there any Dust settled on the Notebook Keyboard
    3. Are there any Keys which are fallen off / Any Keys which are loose
    Troubleshooting:
    Step 01. Click on the Start Button and go to Control Panel
    Step 02. Open the Device Manager and expand the Keyboard from the list
    Step 03. Right click on Standard PS/2 Keyboard and click on Uninstall
    Note: This driver will get installed again automatically on your Notebook
    Step 04. Please turn OFF the Notebook
    Step 05. Un-plug the Power/AC Adapter and also remove the Battery too
    Step 06. Press and Hold the Power Button of the Notebook for a full minute
    Step 07. Now let's re-insert the battery back in and plug back the Power/AC Adapter
    Step 08. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
    Step 09. Once you get to the BIOS, Please press F9 or F5 Key[Model specific] to load setup defaults for the BIOS
    Step 10. Use the arrow keys to say "YES" and hit enter
    Step 11. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
    Step 12. Now please wait till the Unit loads the Windows Operating system
    Please click on the below shown link to troubleshoot the issue with more ease
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc
    Last but not the least could you please check and verify if External USB Keyboard works fine or not?
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP Split x2 Keyboard Problem

    My wife has a new HP Split x2.  The hard keyboard continually stops working for no apparent reason and she usually has to reboot or go into the sleep mode to get it to come back on.  All Windows 8.1 updates are installed.
    I've seen keyboard problems addressed in these forums, but it's usually about a permanent problem versus an intermitent one.
    What is causing this issue and how can I fix it?

    Hi DJ_Scotty_T,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I grasp that your keyboard stops responding for not apparent reason, but if you reboot or go into sleepmode  and wake it up, it starts responding again.
    You have done all your windows updates.
    Have you tried running The HP Support Assistant to help with HP updates and resolving issues.
    Here is a link to  HP Drivers & Downloads. Please input your exact model on split x 2 and follow the on screen prompts to display the drivers for your notebook. Please check for a bios update.  If there is one, I suggest contacting HP for assistance with updating the bios, as it does have the potential to cause issues, if something should fail during the process.
    Updating the BIOS
    How Do I Find My Model Number or Product Number?
    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
    You could also try using msconfig to determine if there is a software conflict.  Here is a Widows document to assist with that process. Using System Configuration (msconfig). 
    Please note the section on Services.
    After hiding all Microsoft services, click on the startup tab and disable all
    Restart your computer to see if the issue persists.
    If it does not, go back to the msconfig and start enabling services until the issue returns, to determine the conflict.
    You will need to restart after each one.
    As it is new, you could also contact HP support. They have the ability to remotely log onto your system and may be able to locate  and resolve the issue for you.
    If you would like further assistance please provide your exact model and the results from the troubleshooting.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Migrated User Account Keyboard Problem AFTER Login

    I have a brand-new MacBookPro (with multi-touch trackpad) that came with Leopard preinstalled. When I first started up the new computer, I set up a new administrator user account first. Then I used Migration Assistant to migrate my primary user account from my PowerBook G4, which is running the latest version of Tiger. I can log into my old user account with the same password I have always used, and everything looks fine--my old desktop is there, my Mail, iCal and iTunes settings all look great, etc.--but I can't use the keyboard. I can use the mouse to click on menus; the keys for the volume and backlight controls work, and some of the keys on the right side of the keyboard work (which seems particularly weird), but I can't do anything else with the keyboard. When I log out of the account and try to go back to the new admin account, the keyboard no longer works at all until I reboot. If I go directly into the new admin account, the keyboard is fine; it only starts locking up AFTER I log into my old user account. I have not had any keyboard problems with any other user accounts that I have created from scratch on the MacBookPro, nor have I had problems with the other user accounts I migrated from the PowerBook. After consulting with an Apple rep on the phone, I have tried the following things:
    1. deleting my migrated keychain file on the problem user account and letting it make a new login keychain;
    2. deleting the original default keychain on the PowerBook and re-running the Migration Assistant;
    3. deleting the problem user on the MacBookPro using the option of creating a disk image, and then creating an empty file in the Users folder with the same name as the problem user account and then dragging the files from the disk image into the folder, and then creating a new version of the user account with the same name, password, etc.;
    4. running Disk Utility to fix permissions (multiple times);
    5. I have completely erased and reinstalled the system on the MacBookPro using the install DVDs twice. The first time, I ran Migration Assistant immediately after the "Welcome," and the second time I set up a new administrator account first and then ran Migration Assistant.
    6. I have also tried the steps outlined in this article: http://docs.info.apple.com/article.html?artnum=306840.
    7. I have tried moving my user files over by hand but then I have a ton of permission problems and I was having trouble getting my Mail settings/mailboxes to move over properly. I've spent hours and hours on this.
    I have NEVER had so much trouble upgrading to a new computer or a new OS in all the years I've owned Macs! What am I missing???

    Well...I'm not sure which of the following fixed my problem, but once I realized it was something to do with the numeric keypad keys, I went into both the Keyboard & Mouse preferences and the Universal Access preferences and I made sure that I set everything back to the default settings. I suspect that going to Keyboard&Mouse-->Keyboard Shortcuts and clicking on "Restore Defaults" is what did the trick. So far, so good. I hope this helps somebody else; I couldn't find anything else anywhere about this somewhat quirky problem.

  • Keyboard problems out of the box with iPhone 3g

    My iPhone 3g is showing strange keyboard behavior, typically starts when launching the SMS app.
    The "P" and Backspace keys, the keys on the rightmost part of the touch area, are non-responsive. The issue will correct itself after 15 mins or so, but it's become very annoying.
    I've made sure I'm not touching any other part of the screen as a possible cause. Showed it to and had three other iPhone users see what I see and they all agree it seems like a bug, just to confirm it's not me.
    Took it to the Apple Store and of course the iPhone behaves when showing it to the Genius.
    Anyone else experienced keyboard problems with 2.0 firmware?

    Well, I took my 16GB iPhone 3g (white) back to the Apple Store today and the Genius looked it over -- said that's the first keyboard problem he's seen come in and mentioned that it was strange the "dead zone" on the touch screen was vertical since, according to him, most "dead zones" tend to be horizontal areas. He said the touch screen matrix is laid out in three horizontal bands on the screens.
    Bottom line: he gave me a new working iPhone 3g.
    He did mention that all returned iPhone 3g's are being sent directly back to the iPhone 3g engineering team for full "autopsies", not just sent back to factory for refurb. He said they want to fully diagnose and understand what defects are out there so as to solve the root cause moving forward.

  • HELP! Keyboard problems

    HELP!
    I have tried all sorts of things, like:
    - removed syst prefs to desktop then restarted
    - un-done, re-done, re-booted various options in International and Keyboard & Mouse
    - run disk utility, both from startup CD AND in target disk mode
    - ran permission smasher
    - swapped out different keyboards and/or mice
    ...but these are my keyboard problem symptoms:
    - numeric keypad not working
    - the shift key (for caps & shift characters) not working&
    - commands (i.e., "Select All") not working
    ...the keyboard does not work in any native Mac appl (e.g., Mail, Safari, TextEdit).
    The only time my keyboard will work correctly is when I create a test new user and log-in. So it's just for me as user.
    Also, oddly enough, keyboard prefs do not show up anywhere.
    Anyplace where I should see something, such as
    Library>preferences - there should be a file com.apple.keyboardtype.plist --- there is no file in any of the folders anywhere.
    All of a sudden the keyboard stopped working, but the mouse attached to it still works. I have no clue what to do to fix it and my AppleCare has ran out.
    Other things I have noticed and tried:
    - running tech tool
    - repairing permissions
    - switching usb ports for the keyboard from the back of the display
    - removing the mouse from the back of the keyboard
    - unplugging everything but the keyboard and mouse
    ...any ideas???

    Hi, DR -
    The numeric keypad not working sounds like MouseKeys became enabled in the Universal Access part of System Preferences.
    The Shift key and Command keys not working sounds like Sticky Keys became enabled in the Universal Access part of System Preferences.
    Check the Universal Access control pane in System Preferences - if those features are checkmarked, try unchecking them.

  • Keyboard problem typing random letters and symbols

    I'm having a keyboard problem, the g key, t key, and 5 key type random letters and symbols.  i just spent $700 a few monoths ago to a genius [at getting my money] for a logic board after spillin somethin on it.  didnt spill anyqthing time.  shoot.  is this goin to be another major expenditure?  downloaded os x 9.4, hoping that might somehow cure it.  yeah right

    Hi Rob,
    Welcome to Apple Support Communities.
    It sounds like your running into an issue with the keyboard on your MacBook Pro. The article linked below provides suggestions that will resolve most keyboard issues like the one you described.
    OS X Mavericks: If keys on your keyboard don’t work
    http://support.apple.com/kb/PH13809
    If other keys don’t work
    You may have accidentally set an option that changes how your keyboard operates.
    Choose Apple menu > System Preferences, click Dictation & Speech, then click “Text to Speech.” If “Speak selected text when the key is pressed” is selected, deselect it or click Change Key to select another key.
    Choose Apple menu > System Preferences, click Accessibility, then click Keyboard. Make sure Slow Keys is turned off. If Slow Keys is on, you must hold down a key longer than usual before it’s recognized.
    Choose Apple menu > System Preferences, click Accessibility, then click Mouse & Trackpad. Make sure Mouse Keys is off. If Mouse Keys is on, pressing keys in the numeric keypad moves the pointer instead of entering numbers.
    Choose Apple menu > System Preferences, click Keyboard, then click Input Sources. Select “Show Input menu in menu bar.” Open the Input menu and make sure the correct keyboard layout is selected. To see the keyboard layout, click Keyboard, then choose “Show Keyboard & Character Viewers in menu bar.”
    I hope this helps.
    -Jason

  • Shuffle problem going between 2000 and XP?

    I recently got my girlfriend a shuffle and it worked fine with my computer, which is running 2000 and has the latest iTunes updates and iPod updater. The only problem I have on my computer using her Shuffle or my Nano is the amount of songs I can transfer at once (which is usually 20, 10 on shuffle).
    Anyway, I'm not sure if Shuffle was the latest version out of the box or not, but it didn't need updating from my computer, unless it was automatic. She took it home to try it on her computer (running XP) and iTunes wanted to format it. I gave her the updates off the site (since she doesn't have internet) and told her to try them since I didn't think it was needed. She tried that and it still managed to screw it up. So I had her restore it and that worked, but she decided after she got it to work to plug it back in again to play with the songs and it had to be restored again and then restored a few more times after that.
    So I was wondering if there was anything I can do to fix it, like uninstall everything that deals with iPod and install the version that came with Shuffle then reinstall the new version over it along with the updater? Take it away because she's apparently bad with technology and have her only deal with my computer for updating her song list? Or was there another way to make it so she won't be restoring shuffle everytime she changes computers? Since I figure it should be compatible enough to go between different versions of windows with different versions of iTunes and still work with no problems.
      Windows 2000  

    That's probably it, since she didn't have any of the music because it was with me. From what I remember, she went around that, and used restore after she backed up all the music. But from what I remember it takes no time at all to a few minutes to restore my Nano, but the Shuffle doesn't have a screen to tell you what's going on (and I find the updater is unreliable with info sometimes).
    She has told me she did the same thing about 20 times before it started to work. So she must've been restoring and thinking 'this isn't doing anything' and ripped it out and eventually gave up and let it do it's thing.
    But I'll have to deal with it next time when she tries to sync it up with my iTunes, so maybe it won't be a big problem this time around.

  • Keyboard problems with Enter, delete, backspace, and right/left arrows

    In some applications, such as Yahoo and this message block right now !!, when composing a message, the arrow keys and delete, backspace keys become non responsive. Various ones will work on a random basis.
    I am getting double "carriage returns" also. Maybe this is why in Omegle when I press ENTER, it will not post a chat message; it will bring up a scroll box and for me to post the comment, I have to use the mouse to click ENTER.
    I have changed batteries in my keyboard, uninstalled /reinstalled Firefox. I have checked the above websites in Chrome and other browsers, and there are no problems.
    This has happened before, I don't recall what the solution was or if it just went away.'''
    Affected sites -- at least these
    http://us.mg6.mail.yahoo.com/neo/launch?ncrumb=Fx5R4O7ccqb&.rand=1041364415&nmig=yes#
    http://omegle.com/
    https://support.mozilla.com/en-US/questions/new?product=beta&category=b2&search=Keyboard+problems+with+Enter%2C+delete%2C+backspace%2C+and+right%2Fleft+arrows&showform=1

    PROBLEM SOLVED: http://forum.archlinux-br.org/viewtopic.php?id=1257
    Solution posted on Brazilian Archlinux forum. Credits to user "920608".
    [cache]
    /etc/xorg.conf
    Section "Files"
             #RgbPath "/usr/X11R6/lib/X11/rgb"
    EndSection
    Section "ServerFlags"
               Option "AutoAddDevices" "False"
    EndSection
    C'ya

  • My hp notebook 2000 wont startup

    when i try to start my hp notebook 2000 it goes to automatic repair and cannot complete that and says errorr. I have windows 7 operation system on a flash drive and I need to know how i could re install windows on the computer. The screen is cracked and I do not know how to connect it to my monitor being able too would greatly help me to fix the computer.

    Hi Sk8forlife,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 2000 Notebook and needing to connect a monitor. Here is a link to connecting a monitor.
    You should be able to restore the Windows 7 using system restore.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Thinkpad keyboard problem - some keys generate multiple keys when pressed

    thinkpad keyboard problem - some keys generate multiple keys when pressed
    For example, "t" generates "tr", "y" generates "yu", "backspace" generates "backspace" plus "IBM access connections", "m" generates "mn" and "n" generates "mn".  Not all keys are wrong. 
    For what it's worth, the odd behaviour started shortly after a trip to Miami in which I had a meeting at a cafe in which we were undercover but it was pouring cats and dogs - it was like having a meeting in a sauna - so I am wondering if the high humidity could have caused the behaviour.
    I tried replacing the keyboard but the new keyboard has the same problem.  
    The machine in question is a Thinkpad T23 running Windows XP Pro
    Any help would be appreciated as I am now in Los Angeles using a borrowed Mac! :-) 

    i have something along the lines of the same problem.
    http://bbs.archlinux.org/viewtopic.php?id=56777
    my conclusion is something in the last system update screwed it up.

  • G560 Keyboard Problem

    In all my games, including browser based flash games, I've found a rather annoying keyboard problem. Whenever I hit a key, the computer believes I have hit a nunber key. If I only hit one key over and over, it cycles through numbers. So if I hit "W", the computer believes that "4" was hit. If i hit "W" again, it believes a "5" was hit, and so on and so forth. It appears that this issue was caused by a Windows Update. I did a system restore, which fixed the problem, but when I shut down, updates were installed, and when I booted up the next day, the issue has returned.
    I am currently running games in compatability mode, and that seems to keep the problem at bay, but it's not a complete fix, as certain games do not function properly in compatability mode. I've called Windows, and posted on their forums, but they said to come here. Does anyone know what the permanent fix for this is? Has Lenovo released a fix?

    it is actually a security program put in lenovos to prevent keyloggers from
    getting your info on what you type into your computer. but to solve this problem,
    go to start -> type in msconfig -> enter -> startup -> and uncheck GID
    Desktop Application -> restart.
    what the program does is save everything you type as consecutive numbers.
    That way people looking at the keyloggers won't be able to see what you
    actually type in since they show up as consecutive numbers with no 
    distinguishable pattern to crack the code. that is why in some games everything
    shows up as numbers even tho you type a letter.

  • U310 KEYBOARD problem

    Lenovo u310 /no touch/
    Recently had keyboard problem. with 1 2 3 4 7 8 9 0 and F1 F2 F3 F6 F7 F8 F9 F10 F11 F12
    keys not working. Had new clean install of windows 8, and windows 7 afterwards.
    Still these keys not working.
    Driver is up to date. Tried updating online from internet.
    no luck.

    hi ns3035,
    Thank You for using Lenovo Community Forums!
    I'm Thinking about stuck key or button on your system.
    Can you try running Passmark Keyboard Test a key or button will show red on the image if it is being pressed or held down.
    Try doing a BIOS Reset as well
        Keep on hitting F2 when you turn it on,
           Once inside BIOS, hit f9 to load default and f10 to save and exit
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Withholding tax master data report changes in SAP FI

    Hi All, In our client according to new audit requirements improvements have to be done for the withholding tax report. According to the the requirements changes only functionality has to be added to the main selection screen of the withholding tax ma

  • File Adapter Problem

    Hi All, we are having a simple scenario we have to use sender file adapter . Our file is Simple Text File where one line is one reocrd .  Do i need to do content conversion ?  we don't have Header line item relation ship.Each flat file line should be

  • Can't restore at all

    something got messed up on my iphone 3gs on 4.0 software and i want to do a restore. but whenever i plug my iphone in , and click restore , it says "The Iphone cannot be restored at this time because the Iphone software update server could not be con

  • Clear items's form when press Add or Find button of navigation controls

    Hi all. Sorry my english. I have a form bound to a user table. Each one of their items is set whith a field... I set the form as automanage. This is the way to work with the navigations control. (It work for me perfectly) The problem is when i press

  • Update Infotype 2051

    Hi all, Is there any Function module to update infotype 2051. The FM HR_Maintain_masterdate is not working for this infotype.