Keyboard records fine, but cant hear it live.

Hey everyone. Can't seem to figure out how to hear my track while I record it, or before hand for that matter.
It records fine, but I get no audio.
Cheers.

On what kind of track are you recording?

Similar Messages

  • I can hear sounds from my laptop but cant hear using headphone

    i am having hp pavillion g 6-1220se,serial no:5cd146766w,Product no-a8s15ea#abv.the problem is i can hear sound for  some application like skype through my headphone,but cant hear any sound while playing movies .but my system speakers are working fine.please resolve this as early as possible,as i bought this hp only nearly one month ago

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Just want to find out how to send email? Can receive just fine, but cant send?!?!

    Hi Just wanted to find out how to send email? can receive just fine but cant send. Using hotmail at the moment.
      Any help would be great
    Thanks

    go to your mail providers setup guide and compare every single setting to how your smtp setup in your settings are set
    and if they are not the same change yours to match their page
    and if they are the same contact your isp to inquire as to why they are blocking the ports your mail provider are using

  • My nano plays but cant hear any audio tried several head sets, and aux cable in my car is there something I'm missing?

    my nano plays but cant hear any audio tried several head sets, and aux cable in my car is there something I'm missing?

    Hi skeete3,
    If you are having an issue with no audio from your iPod Nano, you may find the Accousics troubleshooting in the following article helpful:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Regards,
    - Brenden

  • MIDI Setup - I can record MIDI but not hear it.

    I have reviewed other posts on the site. No luck getting this going yet. I can record MIDI but can't hear the sound on Playback.
    Here are some pics showing my setup. I am using a Roland XP 60 through a Midisport 2X2.
    http://www.guitarpsycho.com/helpwithlogic/
    I can see the data was recorded from the keyboard but am not getting any sound when I play back.
    This is probably simple but I am not finding the answer here. Any help is appreciated!!!

    I am trying to play the Roland sounds. I was able to use the keyboard as a controller using the Quicktime Template which was pretty cool but I want to access any of the Roland sounds.
    Are you saying that I should only run the keyboard in and not have a MIDI out connection?
    Anyway Thanks! I will check the multi-instrument setup after work and let you all know what I figure out.....hopefully tonight.

  • I have videos on my ipod but cant hear them...help please

    I have an iPod video (30GB) and i tried to put videos on it but it didnt work until apple brought out an update on iTunes to convert the videos for you which i used and converted the videos and there on my iPod and i can watch them but i cant hear anything when i play them!! I can hear my normal music fine and i can see the videos but i cant hear them!! Please help!!
      Windows XP Pro  
      Windows XP Pro  

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" (multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    Search this forum for recommendations, but beware of spammers trying to sell you their own product.

  • Can pick up, but cant hear each other

    All of a sudden, I can pick up a call and can't hear them and they cant hear me. But if I call them, the lines work fine.
    I don't ever plug in earphones, so anyone have any ideas what's all of a sudden happened to my iphone4?

    Make sure in FaceFime>Video the correct Mic is selected
    Also, go to System Preferences>Sounds>Input and make sure that mic is selected and the make sounds and see it the light light up with changes in volume.

  • When I speak into my mic I can record it but not hear it as I'm speaking?

    As most of you are pretty **** good with Logic I would be most indebted to anybody that can help me out. I am a serious and full time composer that uses and loves Logic , now for about 6 - 7 years. I am however very bad technically. A college that owes me lots of money changed a setting and has disappeared therefore I can't ask him how to put it back. When my mic is plugged in, via Motu 828, logic hears it and I can record it but I can't hear it (post fader) through logic so I can't hear the effects of the plug-ins in real time. WHAT DO I DO. I will do my best to help someone if they can help me! Thank you very much.
    Ben.
    G5 2 GHZ   Mac OS X (10.3.9)  

    Make sure "Software Monitoring" is checked in the
    Audio preferences, drivers tab.
    That was the button, you Canadian genious. Thank you very much. I had a superb days recording after this.
    These forums are **** good!!!

  • Cant hear a live feed of my mic - G530 Vista

    I am trying to hear myself live through my microphone and out of my speakers.
    I have:
    1) unmuted the microphone
    2) tried turning the mic and the mic boost volumes up full
    3) uninstalled and reinstalled the drivers (conexant HD smart audio 221)
    4) everything that Lenovo could suggest
    Still no use.
    I want to be able to take my laptop to my friends for a party and sing karoake.
    I have searched endlessly on the internet but to no avail.
    The nearest I got was a suggestion of adding an 'enableinputmonitor' into the regedit.
    There is no option for this.
    It seems the enable input monitor option should appear on sound > playback tab > selecting speaker > selecting properties > then in the 'levels' tab, but it just isnt there,  Its driving me up the wall and someone please please help.
    I phoned the retailer where I bought the laptop and they had no answer for me either.
    Anyone, please please help
    Thanks
    Karen

    Yes I used to use my pc and my old tiny laptop in this way.
    i use a microphone for input and use the headphone socket to run an output to my stereo
    Its for singing through.
    Seems to be either a problem with Vista, or the sound card, or the non appearance of enable input monitor in the sound option.

  • I put facebook on my mac -pro book and i can see and here other person , but he can see me but cant hear me what should

    i got a mac-pro and i put facetime on it and i can see and hear other person but he can see but not hear me , what should i do

    Make sure in FaceFime>Video the correct Mic is selected
    Also, go to System Preferences>Sounds>Input and make sure that mic is selected and the make sounds and see it the light light up with changes in volume.

  • Range Expander Looks Fine - but cant connect to Internet.

    I connect to the range extender & things look fine, but I can't get onto the Internet.

    What's the model number of the Range Extender as well as the model number of the Router? The Linksys Wireless Range Extender and wireless router or access point’s wireless settings should match in order for them to work properly. You must first identify the following wireless settings of your router:
    • Wireless Network Name (SSID)
    • Wireless Channel
    • Wireless Security Mode (WPA/WPA2 Personal or WEP)
    • Network Key or Passphrase
    Here is the link for setting up the Range Extender:
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=aeb3109289c04de7800546f43771bfe0_3760.xml&pid=80&r...

  • Ipod Itouch turns on but cant hear music from it??

    Hey guys any help would be appreciated! Today, I was running on treadmill and it was working fine and then all of a sudden couldnt hear anything! I thought maybe headphones were busted, but I tried 2 different ones and it is ipod, it turns on and goes to song, but seems to have no music come out of it. I tried resetting it and turning it off and on with no luck; anybody know the solution? It may have got a little sweat on it, but I have ran with it for a year and never had this problem!

    hi
    you didnt upgrade anything before?
    You could try downgrading... dl the FW somewhere (eg at www.felixbruns.de/iPod/firmware/ )
    Shutdown IPod, Start iPod in DFU Mode (Press LOCK+HOME, when Apple Logo appears release LOCK button; when prompt of connecting to iTunes, do so and THEN release HOME)
    Itunes will ask to restore, cancel, press SHIFT key, then the "restore"button in sync dialog and select the IPSW you dl'ed before.
    NO RESPONSIBILITY if your HW gets damaged. I have to write this...
    ah yes: remember to make a backup
    greetings, CF

  • Download and install Skype,BUT cant hear anyoner and everything seems to be working OK,just my end I cant hear anyone

    I have had Skype installed along with Firefox.Both were and I believe receint ones.
    I have tried to activate Skype,BUT I am unable to hear anyone that is speaking to me.
    I have checked all the Sype activators and they all seem to work I can see the mic working,I can see the speaker working,BUT nothing is coming out of the speaker.
    I am using Windows 7 with the latest Mozilla.
    I have checked all the plug ins and they all look ok,so my question is,why wont the system work and what have I done wrong.
    I am now stumped and do hope that some one can assist me.
    Thanks in advance

    Go to a computer store that has a tech department. Tell them the above.
    They will tell you it is the speaker. A hardware problem. Not software.

  • HDD seems to be fine but cant start up OS. Blue Alternating Screen

    The problem started about a week ago. There was a clicking sound from my hdd which would be followed by the spinning wheel and the screen freezing for a short period of time. I booted from the install disc and checked/repaired the disc. For the rest of the week, macbook ran well - no hanging, no freezing etc.
    Last night, the clicking starting again while I was watching youtube. I waited for the freeze to be over before i shut down the computer the proper way.
    This morning, macbook could not start up the OS. After the initial apple loading screen, I am stucked on a light blue screen which alternates with a darker blue screen (I assume it's trying to load the OS).
    I have no downloaded or updated anything in the past 2 weeks at least.
    I managed to boot from the install disc to repair disc and repair permissions and from there it says HDD fine.
    I have tried to restart the PRAM (read from some forums it may help) but still stuck on the alternating blue screen.
    So far, havent been able to load in safe mode.
    Help anyone??
    The mac store is pretty far, plus I kinda need my amc for uni so I dont want to send it in if I can help it. Should I just re-install the OS??
    Thanks.

    Just to update, i managed to load safe mode and it asked for my username and password.
    I keyed it in and it loaded to the leopard wallpaper but then flickered back to the blue screen and asked for my username and password again.
    Then there was a loud click and the whole macbook just turned off.. possibly ran out of battery? Or possible the whole thing just died?

  • I am using AIM in ichat and i can see the other person but cant hear them

    They can see and hear me and ventrillo works for sound as does itunes and game so its not, systems/sound or i wouldnt have sound at all

    Hi,
    Devices do have to be Set in System Preferences > Sound > output tab AND in iChat Menu > Preferences > Video/Audio section as the Output device (drop down if you have more than one).
    Some Blue Tooth Headsets require that they are set in System Preferences > Sound > Input an Output tabs before setting in iChat.
    If set up already set the iChat to any other output first then set System Preferences (Again) and then return to iChat to make it appear the Blue Tooth headset is being set "last" (As in Last step).
    I see nothing here about iChat http://forum.ventrilo.com/showthread.php?t=39590
    8:31 PM Friday; August 6, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for