Keyboard Satellite 3000-214 - Ctrl-key not working

Hi,
I've started my old Satellite 3000-214 Notebook and suddenly my Ctrl-key did not work anymore.
I've already tried to clean the keyboard by unmounting all keys from it and cleaning the foils, without success.
Can anyone tell me where I can get a suitable keyboard from (I live in germany)?
Does it has to be an original Toshiba keyboard or can it be from an other manufacturer?
How can I remove the keyboard from the laptop? Do I have to open the case or is it possible to get it out with a screwdriver or something?
Thx for any hint!
Best regards.
Ting

Hi
You should use the original Toshiba keyboard which is supported and compatible with this notebook.
All parts and devices you can purchase from the Toshiba authorized service partner in your country. The full database with worldwide ASP you can find on the Toshiba European support page.
Usually if you want to remove the keyboard you have to remove firstly the thin cover above the keyboard.
There you will find two screws which secure the keyboard. After removing of these two screws you will be able to put out the keyboard.
But be careful; the keyboard is connected with the flat cable to the motherboard.

Similar Messages

Satellite A350-214 media keys not working

After upgrading from Vista to Windows 7 the feather touch media keys are not working.The bluetooth perpheral device drivers are also missing.Pl help...

Try downloading the Windows 7 drivers. You can get them from here:
http://support.toshiba-tie.co.jp/windows7/download/Satellite_A350_32_cae.htm
The buttons are controlled by Toshiba Value added software. There is a bluetooth stack you may need to install. You may want to add the rest of the windows 7 drivers. The display and sound drivers will give you additional HDMI support that the native driver does not support.
Good luck

Satellite L850 - Special function key not working properly

Hi Everyone,
I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
Please advise. Thks a lot!

Take a look here:
Function key changes in Satellite and Qosmio 800 series
http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
You can use the traditional FN + F key mode or just an F key mode.
This can be enabled and disabled in BIOS or the HWSetup
In BIOS go to Advanced -> System configuration -> Function key mode
This mode can be changed
Also be sure that Function Button option is enabled too

Wired keyboard-number pad&right arrow keys not working-serial # help!

Hello to whomever reads/replies -
I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
Sharon

Hello sharon:
Welcome to Apple discussions.
Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
Incidentally, it appears to me that your KB is, indeed, broken.
Barry

Satellite Pro A10 - some keys not working with new keyboard

Hi all
I hope some1 can help with this
i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
i fitted into my other A10 and all keys work so keyboard is fine.
All works ok with usb keyboard. Had motherboard out all seems ok.
Any help plz
chris....
Message was edited by: widgy

Hi
Why do you think that the motherboard is ok?
Maybe its a keyboard controller issue
Did you check if the cable was connected properly?
In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
Bye

2007 MacBook Pro ctrl key not working

Hi all,
I have used various iterations of bootcamp with my 2007 macbook pro without problem. I have also sucessfully installed Windows 7 64-bit using bootcamp and got it working almost perfectly (sound, video, magic mouse) despite it not officially being supported by the version of bootcamp that came with Snow Leopard.
My only problem now is that the control lkey isn't working. I've tried various keymappers to map it to another key (generally the Apple key) to no avail. And when I say it isn't working, I mean it's not working at all. Key mappers don't recognise when I tap it, I can't Ctrl-C to copy or Ctrl-anything to anything.
I have installed the Apple keyboard driver and everything else works perfectly, including the F-keys, Fn, alt and the Apple key (which opens the start menu). Any suggestions for how I could fix this would be greatfully received.
Thanks,
Alexis

Sadly it turns out that it's not working in OS X either. I had convinced myself it was a software issue but it is apparently hardware. Shows how seldom the control key's used in OS X doesn't it.
If anyone has any suggestions as to how I might have a bash at fixing it, please let me know.
Thanks,
Alexis

Portege R500 - Ctrl Key not working

Hi Guys
I have two toshiba portege r500 which have never really be used since purchase about 2 years ago.
Today I get one out to start using it and find the ctrl key is not working which I thought was strange.
After a little browsing I could not find a solution so I simply got the other identical laptop out and starting using that only to find the exact some problem.
The laptops are both running XP.
One of which I have reformatted and uninstalled the keyboard driver to see if that would solve the problem but it did not.
Any others. Many have suggested that it may be due to a damaged keyboard cable but I think it would be highly unlikely that they would both break in the same way.
Thanks in advance

Connect an external USB keyboard and check if the button would work.
If the button can be used with external keyboard then the internal keyboard is faulty and needs to be replaced.

Ctrl key not working properly

Hi,
I have an HP Pavilion 17-e031sa Notebook PC purchased only 2-weeks ago and running Windows 8. The ctrl key is not working as it should. I would typically use it together with the left mouse key to highlight non-consecutive items for copying, but it will not work for this function. It doesn't seem to be the key itself as it does work in the alt/ctrl/del combination. I have tried uninstalling the keyboard driver and rebooting, but without success. Any help would be appreciated.
This question was solved.
View Solution.

Hi riggy69,
Sorry for the confusion, I knew those hotkeys wouldn't do the function you were looking for. I wanted to know if those shortcuts worked using the Ctrl key. This way we can see if it that particular function is working or all the ctrl key shortcuts are working. Did any hotkeys do what they were supposed to do? For example, does Ctrl+X cut the selected text or does Ctrl-Esc open the start menu?
Trying to see if there is something wrong with the key itself or is someone is wrong with that particular function you are trying.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Macbook Pro left CTRL key not working

I woke my Macbook pro from sleep this morning and now the left ctl and shift keys aren't working. They were working fine last night, I was using both keys for photoshop, but now nothing. I've tried remapping the CTRL key to fn using KeyRemap4Macbook, but it doesn't work, even a restart. System Preferences doesn't show any change in keyboard layout or mapping. Has anyone else had this problem? The Macbook wasn't moved last night, nothing new was plugged in, and no liquids were anywhere near it. It's an i7 2.3 with 8gb ram, running Mountain Lion 10.8.2, thanks

Thanks for your reply Peter. I restored defaults, and restarted twice, but still nothing. Both keys work on an external keyboard, so I think that it's a mechanical fault. I'll send it back next week when this job has finished- let's hope that it's not part fo a faulty batch.

Keyboard delete and caps lock keys not working after update

Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
2. Update key board driver (standard PS/2)..it says latest version is installed.
3. Uninstall and reinstall.
4. Reset using the remove batteryt hold down power key option.
The caps lock and delete does not work in Notepad or MS Word.
It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
I am using Windows 7 Home premium on a 64 bit HP G62.
help appreciated as ever
thanks
matyiii

matyiii wrote:
Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
regards
Matyiii
Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Shift key and ctrl keys not working correctly...

both rt/lt shift keys are making symbols ⁄€‹›ﬁﬂ‡ÎÔÇÂ´ instead of caps and my ctrl key asks me if i really want to shut down my computer. i'm really hoping this is an easy fix but can't find anything in forums. if additional information is needed please let me know. HELP PLEASE

Hi, Chris. I don't know of any. If there were a way, I'm sure it would require that all the keys be working properly, which yours aren't. You've got crossed wires somewhere, and you're going to need a replacement keyboard.
Powerbook parts vendors:
http://www.pbparts.com (parts and repair work)
http://www.dttservice.com (parts and repair work)
http://www.powerbookresq.com (parts and repair work)
http://www.powerbookmedic.com (parts and repair work)
http://www.tekserve.com (parts and repair work)
http://www.welovemacs.com (parts and used equipment)
http://www.ifixit.com (parts and excellent, illustrated online take-apart instructions)
Prices for the same parts vary WIDELY, so check around.

Satellite A50-112: F1 key not work for entering Bios

my toshiba Satellite SA50-112 not entering into BIOS or CMOS setup because of F1 key is not functioning what i can do for changing the boot sequence to CDROM by alternative way.
please help us to work better

There are THREE ways to make your notebook boot from CD:
1) You can adjust the BIOS setting by entering into it with the key "ESC" (not F1 as you said before)
2) You can boot directly on CD by holding down the key "C" during starup
3) You can make the "Select Boot device menu" appear by holding down the "F12" key.
All above key combinations work DURING STARTUP of your notebook only. Therefor try your timing ;)
Good luck :)
electrochain

Apple Keyboard used on MacBook: Some keys not working

Hello,
I use an Apple Keyboard (USB-connection, aluminium, Model No.: A1243, 2007) for typing longer texts when my MacBook is connected to an external monitor.
Since I have re-installed the OS X software on my MacBook because I had to replace the hard drive, the Keyboard doesn't work successful. Some keys just don't work; The letters cannot be typed. (Affected keys: "8", "I", "K", "," and number pad keys "7", "4", "1")
I installed all software updates for keyboards that could be found on the apple support webpages.
The keyboard istelf doesn't show any defects for me.
What can I do to solve the provlem? Or to get to know if it's a software-based problem? I want to exclude all possible software reasons.. In a worst case I have to replace the keyboard, I think. But it always worked fine and a new one can be expensive.
Thank you for all hints!
Message was edited by: fritzmartini

have you tried command-option and the keys? or command and one of the keys? if so did it work??? if not, try going into the finder, and go to preferences file, but did not know which one would be the culprit. The strategy I adopted, which took me back to my System 9 (and earlier) days, was to go into the Library folder of the affected user account, open up the Preferences folder (after backing it up elsewhere on the hard drive), and take out a small number of files (.plist files, etc) at a time, log out then back in and note any changes. The theory is that if there were any changes then it is most likely that the offending file was in the last group to be removed. You would then replace those files one at a time until the problem returned. Eventually I found the culprit. To my surprise it was the com.apple.loginwindow.plist file. Removing that cured things completely.
Why that particular preference file affected that particular key is beyond me, but it fixed the problem!

Keyboard: audio and Brightness control keys not working with or without fn

The Keys for controling Audio and Brightness (F1-F5) do not work.
Also combined with pressing the "fn" key the keys do not work.
So i only control audio with the remote control or the slider in the menubar.
Making a reboot with deleting pram didn't help.
I'm running the up to date version of leopard on a macbook pro (core2duo).
I also searched in the forum for this problem.
I oten read about "sytem control"-"keyboard and mouse"-"keyboard" and the F1, F2, etc. to use as...
but switching this button on or off doesn't change anything.

problem solved:
the couse was the software update 1.1 for macbook pro, because there i had the problem like in this thread: http://discussions.apple.com/thread.jspa?messageID=6142512&#6142512
and did the solution like that, but there i maybe made some mistakes with renaming and copying, so i rinstalled the update and renamed it a copied to plugins, and now all works as it should.
thanks for help

Satellite P305-S8820 - FN key not working after clean install of Windows 7

Hi,
I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
Any ideas?

Hello John
You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

Keyboard Satellite 3000-214 - Ctrl-key not working

Similar Messages

Maybe you are looking for