Keyboard settings for external keyboard get lost between sessions

Hello!
I use MacBook Pro laptop which I connect to external mac keyboard when come to work. I prefer to use "F1, F2... etc" keys as functional keys so I turn on this setting in bootcamp control panel. However, each time I disconnect the keyboard and connect it back this setting stops to affect that keyboard while setting is still set to true in control panel.
Is this problem going to be solved?
Thank you!

Any of the regular helpers here will tell you that CCleaner deletes settings files resulting in the sort of upsets you have described. I don't know why you didn't have such trouble under previous versions of windows, but since I choose not to use windows 8 I'm not able to comment on how or if the behaviour has changed.
There have been changes in Thunderbird itself, allegedly, which I haven't seen applied to any of my own three installations of Thunderbird, that might mean that there are new files that need to be specifically excluded from CCleaner's actions. Maybe these changes are specifically related to Windows 8 installations. If you have a ''xulstore.json'' in the profile on the affected machine(s) then try adding ''xulstore.json'' to CCleaner's exclusions.
"…will essentially keep CCleaner from managing anything relating to Tbird... and that's sort of contradictory…" Why?? What do you do in Thunderbird that you consider ''needs'' to be cleaned up by CCleaner? CCleaner picks on files whose names coincide with similar files used by browsers to record browsing history. Thunderbird uses, for instance, json files to store configuration settings. If you allow CCeaner to delete these from Thunderbird's profile then Thunderbird will necessarily forget things.
We always advise to exclude all of Thunderbird's profile from CCleaner. If you won't take that advice then you're rather on your own.

Similar Messages

When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?

When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?
More info: I've combed through the settings in facebook and there is nothing that shows I'm blocking anything from accessing it.

Sure sounds like a Facebook setting. When you look at your Privacy Settings in Facebook (on facebook.com), you should see something under "Apps you use" that says
Turn off your ability to use apps, plugins, and websites on and off Facebook. After you turn this off, we will not store information about you when you use apps or websites off Facebook.
The "Turn off" is a hyperlink that shuts down the Facebook platform. If you don't see this, or if the wording is different, you may have (inadvertently?) shut this off, and should be able to turn it back on.
Edit: The sequence to that screen on facebook.com is: Privacy Settings (from the upper right dropdown), then "Ads, Apps and Websites" will have an "Edit settings" link to the right. This is where you'll see the "Apps you use" screen.

Session getting lost between two applications deployed on two WLS versions.

Hi,
Jdev version 11.1.1.5.
I am facing an issue of session being getting lost. Let me explain the scenario.
Our client has a legacy application(xyz) running on Web logic server(10.3.3). We have developed an application which was deployed on Web logic Server(10.3.5).
The Legacy application will call the developed application using URL invocation. In the legacy application, the logged in user information is stored in session and the same parameter is appended to URL to call the developed application.
In the developed application, we have a servlet which reads the URL and based on the parameter appended to it, we set the context of the application. Everything is working fine till here.
But, in the developed application, we have a link to navigate to the legacy application. Once navigated, in legacy application if the user again calls the developed application, the session which was set earlier is lost.
Because of this, the context is not getting set in the developed application.
Is there a way, I can resolve this issue? OR can I raise SR with Oracle to look into it. Please suggest.
Thanks,
Umesh

Thanks Frank for the reply.
Session sharing was not configured in WLS.
I was searching for Session sharing and I found this article written by Lucas Jellema. http://technology.amis.nl/2012/01/18/sharing-session-state-between-jee-web-application-through-weblogic-session-descriptor-of-sharing-enabled/
Here it is mentioned that for session sharing, we need to check the Enable session sharing in weblogic-application.xml.
My question is do we need to make this change in both the application? i.e Legacy application and developed application.
And it was mentioned in the article that both the web app were deployed to a single Web Logic Server. But in my case the Legacy application is deployed to 10.3.3 and developed application is deployed to 10.3.5.
In this case will the session sharing works?
Any how I will let our client know about this change and will give a try.
Thanks,
Umesh

HotSynch Connection gets lost between TE2 and Windows Vista

I'm trying to hotsync (by bluetooth) between my Tungsten E2 and Windows Vista. I got them speaking to each other, but the hotsync starts and never gets past the Calendar. The laptop looks like it's still running, but the TE2 hotsynch log says the connection was lost.
Is there a way to keep them connected long enough to sync?
The TE2 is running Palm OS Garnet v. 5.4.7 and HotSync v. 5.0P
The laptop is running Windows Vista 7 64 bit, HotSync Manager 7.0.2 and Palm Desktop 6.2.2.
Thanks!
Post relates to: Tungsten E2

Oh, yeah, one more thing..the hotsync works fine by USB cable on the desktop PC running Windows XP, so I don't think there's any corrupted databases on the TE2 (because if there was, then the USB cable hotsync wouldn't work)

Settings for external editors, i.e. Nik

I have started setting up external editor presets for my various NIK Software applications.
But what I don't have a handle on is what settings I should use for such things as:
I'm just guessing on File Format, Color Space, Bit Depth, Resolution, Compression.
I've searched all the great Adobe tutorials but need a basic understanding what I should be striving for and when?
Thanks in advance for you help.
Bohdan

If you're publishing to .Mac put the Easy Grade Plus generated stuff (Guess it's html?) on your iDisk.
1. Create a folder in your iDisk/Web/Sites folder.
2. Name it something like 'EasyGrade' or whatever
3. Copy your EasyGrade files to that folder
4. web.mac.com/username/nameofthefolder/nameofthefile.extension is the address at which the file will be stored on the web
Example: http://web.mac.com/username/EasyGrade/index.html
However depending on the file format (what extension it has) it may not work on .Mac as not all formats are supported.
Regards,
Cédric

Settings for external catalog

Dear experts,
we are trying to set up an external catalog in order for a specific customer to be able to place orders through his SRM system.
Searching, i found out that the settings that need to be done from the SRM side are the following:
First step is to setup the OCI Catalog connectivity. In order to do this the SRM side will need to setup the following parameters:
URL= http://[hostname]:[port]/[application-name]/b2b/init.do?shop=shopname&forward=ocireceive
~OKCODE ADDI
~TARGET _top
~FORCETARGET YES
~CALLER CTLG
HOOK_URL (blank)
The shop set up is the ISA B2B shop application which works perfectly for the other users using it. What i cannot find is what kind of settings do i need to make in my CRM system in order for the external catalog to be accessible from the customer. I really have no clue where else to look so any help would be highly appreciated.
Regards to all.

Hi,
I'm testing the validate function on an external catalogue (SRM 5) and am retrieving the following error just after the post URL which btw looks correct.
Error: Unable to extract ~caller from HOOK_URL
I'm new to this so all input is welcome. Thanks

Best rgb and gamma settings for external monitor with mountain lion

Hi,
I'm using an LG LED 22 inch monitor with my MBP mid 2010 via minidisplay to hdmi. on OS X side the settings have been default. On the LED side the settings , if set to preset RGB it tends to fade the whites a lot. when i set to user definied and let the preset rgb be at it is, the colors are quote decent. currently they are on R 50, G 58 and B 59 and Gamma 1. Which is the best RGB and Gamma value for OS X Mountain Lion?

Welcome to the forum.
First off, you need to go and buy a hardware monitor calibrator, such as an OptixXR or similar. This will build a custom monitor profile for your specific screen. Without this starting point you can forget ANY attempt at accurate colour matching.
Never (and I mean never) use a working space such as sRGB or Adobe98 as your monitor profile, that's not what they are designed for. Working spaces control what colours are possible in the image, monitor profiles control how those colours are shown on screen. Aperture uses it's own working space so you don't have to worry about that too much.
To answer the rest far too briefly, I'd suggest setting the proofing profile to sRGB and of course use sRGB for the export preset. The gamma setting you will have to adjust depending on how dark the Lightjet prints look compared to your screen. You will have to do test-strips to start with.
Your images looking crap on flickr on Windows machines is partly because Windows web browsers generally do NO colour correction, and only partly to do with the different gamma.
Ian

Specific Settings for external and internal display modes?

Does anyone know if there is a way do have different settings that adapt to whether I'm using my Macbook's internal display or am docked to my 23" external Cinema Display at home? It would be nice if the Dock would be small and on the side "internally" and large and at the bottom "externally." Also its a pain if I've expanded a window on my external, then disconnect and have to tidy up my windows again so they fit on my smaller internal dispaly

Hi
Check this document
Page 35 shows how to change icons
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8
Regards
Krishna.

Session getting lost between JSPs

Hi,
I am working on a application in which a user can upload files using FTP. The files may be of large size, say 50-100 MB and it takes approx 30-60 mins for such uploads. The session timeout for the website is set to 20 mins. The way it works is, from the main browser window there is a link to upload files. This link opens a popup window and through this window the user can upload a file. In this popup window, i have included an iframe which sends a post request to the server every 10 mins to keep the session alive. This is working fine in most of the cases, but sometimes it happens that when the when a call is made to send a post request to the server from the iframe, the session is becoming null & invalid or this happens also after the upload has finished and the "upload successful" page gets loaded. This is a very random behaviour, sometimes it works perfectly fine and sometimes it doesn't. It is not dependent on the time, or the size of the file or the number of times the iframe has submitted the request to the server.
Any one has any idea why the session is becoming null randomly?

Hi,
This should never really happen when you bring up a Web Server or to what so called a loadbalancer in place as ultimately the container which creates the session Object.
I strongly feel that the Webserver(Apache,Sun App Server or IIS) is not passing on the jessionid cookie value which is actually responsible for this action when we are not using url writing for maintaining. .
How do test that ??
try the below code snippet and the rest all is understood on what values you get.
<%
   //Get the values of respective Properties
   boolean sessionIdFromCookie = request.isRequestedSessionIdFromCookie();
   boolean sessionIdFromUrl = request.isRequestedSessionIdFromURL();
%>
From Cookie : <%=sessionIdFromCookie%>
From URL : <%=sessionIdFromUrl%>Well to sort out problems as these you got to enable passing of jsessionid cookie to the Application Context via Webserver which might call for additional set of configurations from webserver end and AJP part.
Just as an example let us consider in the case employing IBM http server
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/topic/com.ibm.websphere.base.doc/info/aes/ae/xjta_ihs_int.htmlor a neutral way to fix this issue is to adopt usage of a technique called URLREWRITING.
How do you do that ??
A quick google search provided me the below results
http://publib.boulder.ibm.com/infocenter/wchelp/v5r6/index.jsp?topic=/com.ibm.commerce.admin.doc/tasks/tseurlrewrite.htm
http://www.adventnet.com/products/qengine/help/load_testing/loadscript_creation/recording_bc/url_rewriting.html
http://java.boot.by/wcd-guide/ch04s04.htmlHope this might help :)
REGARDS,
RaHuL

Messages get lost between IE and AE (IDoc to SOAP - Async)

Dear Experts,
in a IDoc to SOAP (Async) scenario a message was not transferred. I could not see any error message in RWB or ABAP Monitoring. When I enter RWB, the column engine is "Integration Engine" and the status is "Successful". At the same time other message with the same message interface were transmitted and they have engine "All" and status "Successful".
Why was this message not passed on to Adapter Engine? How can I restart the processing, so that the message is transfered?
Best regards,
David

Thank you for your answers:
@ Divyesh:
I can't resend the message. It does not have an error status. It says "Successful", although it only can be seen in Integration Engine, not Adapter Engine. There are not SM58 errors.
@ Krish:
In ABAP Monitoring all steps were performed as expected. Before and after this message some other messages with the same message interface were transmitted and they are visible in ABAP Monitoring, Inegration Engine and Adpater Engine.
@Hareenkumar:
In SAP everything looks like expected.
The only difference between this message and other messages sent at the same time (which were transmitted correctly) is that in RWB Message Monitoring (Component: Integration Server) the Engine is "Integration Engine" instead of "All". And the message is not visible when you select for component "Adapter Engine".
Do you have another idea?
Thanks in advance,
David

Change settings for external displays: no "mirror displays" mode

Hello,
I'm using a 13" MBP with Snow Leopard. I'm using different displays and projectors in different locations. When you plug an external display in, the two displays are first in "mirror displays" mode. First thing I do is to switch this off.
Is there any way of changing the settings, so that an external display doesn't start in the synchronized mode??
Thanks in advance.
Message was edited by: robert170

only if you plug in this projector again. If you plug in a new projector (which I often do) it allways starts in "mirrored" mode.
I just found an app which - at least - makes the switching easier:
http://www.fabiancanas.com/Projects/MirrorDisplays/
Message was edited by: robert170

Bluetooth settings for BT Arc Mouse lost on restart since upgrade

Upgraded OSX last night and on restart my Bluetooth BT Arc Touch mouse is not working.
I remove the mouse from the bluetooth settings and, resetting the mouse, it then finds the device and I pair the mouse again.
It works!
Then when I shutdown my MacBook Pro, next time I switch on the mouse does not work again. Its showing as "Not Connected" in the bluetooth settings.
Very, very frustrating.
Have downloaded latest Arc Touch mouse drivers but no fix.
Any ideas?

PS.
In menu bar, bluetooth icon states "Bluetooth: Not Available".
Bluetooth is switched on.
The mouse is blinking red and green which means "Device is discoverable (trying to connect to the transceiver)."

Cover art gets lost between 2 Macs

Hi,
I'm importing my whole CD collection to have it playable on iMac with FrontRow. Because of ergonomics and the fact that the iMac is not net connected I'm ripping my CD's on another Mac and then transfering them with USB memory card or with DVD-RW. I have found that if I forget to add the cover art to the album and then try to do it later, the art does not travel with the file ? I'm always copying the iTunes Library file and the .xml file from the user folder with the actual music files. The art that was pasted with the correcsponding ripping file is seen on my iMac just fine, but the art that was added later and though it shows alright with my G5 when transfered to iMac doens't show up there in the FrontRow ? Any ideas what to do ? also FrontRow insists that I have two different folders of one artist (named excactly the same) although iTunes only shows one artist name ?
Thanks
2,5 Ghz G5 Mac OS X (10.4.3) Logic 7, Yamaha 01X

Depending on the file format you use for importing CDs, artwork is stored inside the audiotracks (or isn't): MP3, AAC: artwork is stored inside the audiotracks; AIFF, Wav: artwork is stored somewhere else.

EREC - How to disable user settings in external job board e recruitment

Hi All,
Is there an option to disable the user settings for External Job Boards ? The user settings where candidate can save default keywork search etc (which unfortunately stays for other candidates unless the default value is discarded.)
Thanks
Suman

Hi Suman,
Please check the following link on how to set up the WDDISABLEUSERPERSONALIZATION parameter:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/7b/fb57412df8091de10000000a155106/frameset.htm
and then set up the parameter for the standard hrrcf_a_unreg_job_search and try to run your WD application.
Hope it helps,
Kind Regards
Christine

Settings for changing data

trying to change the IP settings for source system get message
:Source system default settings are maximun values; input adjusted
i am changing from 5000 to 50 000, the max it allows is 5 000 where do i go from here?
thanks

Hi,
You can also try to change the default settings from the source system side. Goto Sbiw->General settings->Maintain control parameters for data transfer.
If it dosen't allow you to change the settings, take help from your BASIS team as the table is cross client.
Cheers,
Kedar

Keyboard settings for external keyboard get lost between sessions

Similar Messages

Maybe you are looking for