Keyboard settings for Fn - automatic using regedit

Is a registry key that can set the options for [ Fn ] permanent on or off ( in Microsoft Windows 8.1 )

I'm not sure if it's Fast Track Pro, the box just says M-Audio Fast Track. My keyboard is connected into the guitar slot with a 1/4" jack, which M-Audio said to do, then the interface is connected to my mac through usb. I've done this before and it worked, but for some reason I couldn't get it to work yesterday. I tried using a mic through the interface, selected "real instrument" and GB picked up the signal just fine, and it also works with electric guitar. But when I use the keyboard and select "software instrument" GB isn't get a signal, but the interface is. Also under "software instrument" in GB my options are grayed out as far as selecting "My instrument is connected with". And when I go to Preferences>Audio/Midi, it says "0 midi inputs detected" if I'm using my keyboard through the fast track, but if I use the mic through the fast track it says "1 midi input detected". About a month ago I used my keyboard connected through fast track to record and it worked fine, but I'm still new to GB and wondering if there's a setting that I'm missing. I also updated everything last night. I just like using fast track because I get more volume than when my keyboard is directly connected to my mac thru usb.

Similar Messages

Is there a list of keyboard shortcuts for Win 7 using the MacBook Pro keyboard ?

Is there a list of keyboard shortcuts for Win 7 using the MacBook Pro keyboard ?

See > http://support.apple.com/kb/HT5636

Keyboard settings for two languages

Please tell me how to set keyboard switching for two languages.

Maybe this link will help you.
Go to settings select Time & Language, Select Region and language.
Also this link may help is for win 8, but it is similar to win 10 TP.
http://windows.microsoft.com/en-US/windows-8/using-multiple-languages

What are the best settings for Youtube videos using Camileo X200

What is the best video settings for the x200 for youtube videos. 720p-30/ 720p-60/ 1080p-30 .
Thanks

Hi
In my opinion the 720p-30 is good enough for Youtube.

How can I fix Firefox 18 and 19 from taking too long to close when custom settings for history is used?

Hello, please read entire post before answering, thanks!
I had Firefox(FF) 12.something and was happily using it when I had to get a new hard drive and start over, so I decided to upgrade to the latest FF of the moment, 18.something...
After going through setting up all the different add-ons etc.. and resetting the options/preferences (not cool how you all reset those every time it updates!) The time to open and close went from 2-4 seconds each to 78 seconds to open and 48 seconds to close. Over the last two days I tried (except reset) and read all the suggestions here to no avail.
So I read up on how to totally uninstall all traces of Firefox so I could do a clean install, that didn't work either: The freshly reinstalled FF 18.? program still opened and closed in the same times, and had all my info despite my deleting the folders/sub-folders said to hold that info. I turned everything off in FF, still no improvement, so again I tried to find accurate info on how to completely remove FF and still nothing that is correct for the current programs.
Today I looked again for info on how to totally remove FF, found something new to me, and tried that, including a complete search of the registry and removing everything with the firefox name, then reinstalled FF 18.?
Again all my bookmarks and info was there, and when I looked up help it auto-updated to 19.0 without my permission, again I don't like others making decisions for me for "my own good"(hence the screen name), not OK!
So I tried the reset feature in FF 19.0 and it did just that and the opening and closing lag times were gone, back to 2-4 seconds each,which seemed great!,but no.
When I went back to set up my options and restarted, FF went back to the lag, so I eventually removed/reset everything and all was well again, so I started putting/setting things back one at a time, that's when I found and verified the problem, the history settings!!!
I repeated this 6 times with the same results:
Set the History to Remember, and everything works fine, set the History to Custom the lag returns without fail.
My settings in Custom were:
Accept and remember everything until I close FF
Clear history when FF closes.
In the sub-menu "Settings" under the Clear History when FF closes:
All 6 boxes are checked for History and no boxes were checked for Data (all the defaults)
I looked at the processes running in Task manager when starting and stopping FF with these settings,I found that not only was FF.exe running but also a plugin-container.exe, both eventually stop after about 48 seconds, the plugin container does not appear to run when History is set to Remember all... (I have an incomplete memory about the plugin container causing problems like this in the past but I cant remember what or exactly when so...)
I also tried leaving the History setting to Remember All and the restarted and tried to clear everything through the Tools menu and FF stopped responding for about 60 seconds and then seemed fine afterward.
So I conclude that there is a problem in the newer versions with clearing History in the background while the browser continues to function, and the likely culprit is the plugin container(again?)...
So on to the questions...
Is it possible to set History to Custom and have FF 19.0 remain operational during that process and for FF to close in a few seconds as it did in FF 12.something with the same History settings?
If so how can I set that up?
If not, what is the latest version that will work correctly with the History being remembered until FF is closed and then wiped before re-opening, without waiting more than a few seconds for it all to happen as it was in my FF12.? version?
Also, How do I remove ALL TRACES of Firefox 18.? and up so that I can do a clean install if I need to, as I said everything that is here or linked to from here up to today, 2/21/2013, was not sufficient.
Thanks for your time...

So now on to question #2 of the original post...
"Also, How do I remove ALL TRACES of Firefox 18.? and up so that I can do a clean install if I need to, as I said everything that is here or linked to from here up to today, 2/21/2013, was not sufficient."
Why?
As it turns out, the plugin-container.exe rears its ugly head yet again. With as many as four instances trying to run at once, and locking FF completely whenever I try to watch videos online. (Google Chrome has no problems with the same videos on the same sites with the same software available to it on the same drive on the same machine, so it is definitely something in FF)
Also:
1. ) The auto update for; plug-ins, FF itself, add-ons, etc..., refuses to stay disabled.
I've read others saying that as many as five different areas need to be found and addressed in order to fully disable many of the "hidden" functions of the latest Firefox editions, yet I can't find a definite answer nor instructions to fully address this accusation nor can I find complete and full details/ instructions on how to completely uninstall all data connected to Firefox. I have followed what I can find so far and when I reinstall, all my personal data is there including bookmarks etc... so something isn't getting done...
2.) Whomever is in charge of "security"(Villalobos?) keeps disabling my plugins which is keeping me from using FF to some extent and may or may not be keeping the videos from playing while on-line and who knows what else, but as I have stated before I'm against anyone doing anything for any reason under the Hitler/Stalin-esque ideology that "the ends do justify the means", for example:
''Java Plugin 7 update 12 to 15 (click-to-play), Windows has been blocked for your protection." Why was it blocked?
Old versions of the Java plugin are potentially insecure and unstable. All users are strongly recommended to update on our plugin check page.
Who is affected? All users who have these versions of the plugin installed in Firefox.
What does this mean? The problematic add-on or plugin will be automatically disabled and no longer usable.
When Mozilla becomes aware of add-ons, plugins, or other third-party software that seriously compromises Firefox security, stability, or performance and meets certain criteria, the software may be blocked from general use. For more information, please read this support article.
Blocked on February 25, 2013. View block request.''
So as a last resort I'm going to downgrade to something that the socialist people who are now making decisions for the masses that use the newer editions of Firefox can't control (hopefully) and manipulate against my (our) will.
So I need your help cor-el to be able to remove ALL files/instructions/data in order to downgrade without anything "new" being left behind after uninstalling, presuming you know how to accomplish this and will share it with me and everyone else who wants to continue to use Firefox without someone else deciding what we can and can't do with it.(it is still open-source right?)
3.) I use my computer and browser for my business, I can't afford spending all this time and trouble trying to undo what Jorge Villalobos( and those who think as he does) continue to do, apparently believing that it's ok to cost me (us) time and money in the name of "protection", he really doesn't get it, and I'm done putting up with socialists (or control freaks pretending to be socialists) trying to run my computer. Take a friggin' Philosophy/Logic class and learn why the ends NEVER justify the means Jorge....
4.) This is as plain as it gets Jorge et al.: MY Computer, My Choice!...
5.) So what do you say cor-el, will you help me in this?

Keyboard settings for external keyboard get lost between sessions

Hello!
I use MacBook Pro laptop which I connect to external mac keyboard when come to work. I prefer to use "F1, F2... etc" keys as functional keys so I turn on this setting in bootcamp control panel. However, each time I disconnect the keyboard and connect it back this setting stops to affect that keyboard while setting is still set to true in control panel.
Is this problem going to be solved?
Thank you!

Any of the regular helpers here will tell you that CCleaner deletes settings files resulting in the sort of upsets you have described. I don't know why you didn't have such trouble under previous versions of windows, but since I choose not to use windows 8 I'm not able to comment on how or if the behaviour has changed.
There have been changes in Thunderbird itself, allegedly, which I haven't seen applied to any of my own three installations of Thunderbird, that might mean that there are new files that need to be specifically excluded from CCleaner's actions. Maybe these changes are specifically related to Windows 8 installations. If you have a ''xulstore.json'' in the profile on the affected machine(s) then try adding ''xulstore.json'' to CCleaner's exclusions.
"…will essentially keep CCleaner from managing anything relating to Tbird... and that's sort of contradictory…" Why?? What do you do in Thunderbird that you consider ''needs'' to be cleaned up by CCleaner? CCleaner picks on files whose names coincide with similar files used by browsers to record browsing history. Thunderbird uses, for instance, json files to store configuration settings. If you allow CCeaner to delete these from Thunderbird's profile then Thunderbird will necessarily forget things.
We always advise to exclude all of Thunderbird's profile from CCleaner. If you won't take that advice then you're rather on your own.

Personal Settings for Siri to use

Siri is telling my I need to update my personal information in Settings. How do I do that?

Go to Settings->General->Siri and select "My Info". Then select your contact from the contact list. If you do not have a contact made for yourself, then you will need to create one first. Siri will use your information provided by the contact to further help you out.

Input and Publish settings for 8mm film using PreRes422.mov

I'm using Premiere 12 on Windows 8. I just got a sample from the company that converted 8mm film to 720HD ProRes422.mov onto a DVD.
I loaded into Premiere 12 without problem and can see, edit and publish.
However, what would be the best Input settings?
Also, I plan to burn to play on a BluRay player for my HDTV. What would be the best Publish settings?
Any other settings or adjustment I should use to improve the image?

AlanKL
Good news. That footage is not AVCHD.avi. What you have is MotionJPEG.avi which is usually not good news for Premiere Elements. But, if you can import it in the first place, let us give it a go.
The video is 1920 x 1080 @ 29.97 frames per second. The GSpot codec program does not tell us if interlaced or progressive. The way to determine that for sure is with the MediaInfo readout. But, let us try to avoid that with a "try and see" approach.
1. Open Premiere Elements 12 to its Expert workspace, and import your video into the project with Premiere Elements' Add Media/Files and Folders/Project Assets. From Project
Assets, drag the video to the Timeline. Does it have an orange line over its content? If no, then our project preset stays at
NTSC
AVCHD
Full HD 1080i30
And, we have the correct project preset. What does the playback in the Edit area monitor look like?
If there is an orange line over the Timeline content, we don't have the right project preset. So, close that project, and open a new one.
2. In the new Premiere Elements 12 project to its Expert workspace, with the File Menu/New/Project route, manually set the project preset for
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
Then import the video into the project with Premiere Elements' Add Media/Files and Folders/Project Assets. From Project Assets, drag the video to the Timeline. Does it
have an orange line over its content? If no, then our project preset stays at
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
There will be no colored line over the Timeline content if we have the right project preset. What does the playback in the Edit area monitor look like?
At this point, please let us know the results, and we will decide what next.
Thanks.
ATR

Settings for Roaming Network using Time Capsule plus old Airport Extreme

Hi all
I am trying to set up a network in the most effective way for my home and am experiencing some difficulties which I hope your support can help me overcome.
My home is constructed of concrete reinforced with steel and consequently the walls are dense and wireless signals are adversley affected. I have two wireless base stations via which I hope to provide wireless coverage to my whole home which is on the ground floor level only. My Time Capsule is located at one end of my home and is directly connected to my modem which receives the external fibre optic supplied internet connection. The Time Capsule is managed via Airport Utility 6.1. A mac is connected to the Time Capsule via ethernet cable - the Time Capsule also provides a wireless signal. Also connected to the Time Capsule via a long ethernet cable that is routed in internal cable channels within my home is an old conical shaped white Airport Extreme. The Airport Extreme is located at the other end of my house and also has a mac connected to it via ethernet and provides a wireless signal too. The Airport Extreme is managed via Airport Utility 5.6.
I hope to have a wireless network that my iphones and ipad can connect to in various areas of the house. I have read the instructions for setting up a Roaming Network, yet the screen shots provided do not reflect the screens I see using Airport Utility 5.6 and 6.1. Can anyone please assist with the settings that I require?
Also I have a question regarding a roaming network - if I connect a mobile device to the wireless network near to my Time Capsule and then move to the other end of my house near to the Airport Extreme what should happen to the wireless connection strength? Currently with my existing settings the mobile device is maintaining the connection to the Time Capsule and dropping to extremely low connections levels rather than picking up the wireless signal from the Airport Extreme. Should this be the case and if so is there some better way to set up my network?
Originally I had the Airport Extreme configured in a different location closer to the Time Capsule to extend the wireless network from the Time Capsule. The problem was that the Airport Extreme frequently seemed to not provide the newtork. I'm not sure if it lost the network from the Time Capsule or had some other problem.
All help will be greatly appreciated.

So just to be clear.. the Mac at the other end of the house.. has internet connection.. via ethernet.. through the old extreme.. ethernet to the TC.. which is connected via ethernet to the fibre connection.
Is the airport extreme in bridge mode?
As long as it is, you are good to go.
On both the TC and AEBS you create a wireless network.
On both TC and AEBS you name it the same.. eg 24ghz (please use short, no space, pure alphanumeric name).
You set both with the same security.. WPA2 Personal
You set both with the same passkey.. 8-12 characters pure alphanumeric.
BUT you set the wireless channels.. there are three channels that do not overlap.. 1, 6, 11 (13 in europe ME??)
Suggest you set TC to 6.. and set the AEBS to 11.
It might work on auto but IMHO wireless is something you are better controlling than leaving it to dumb algorithm

Ipod nano settings for in-car use

Hi,
I bought an ipod nano 6 which will permanently plugged into a car.
The connection to the car's radio is by analog aux-in. so interaction with the ipod is minimal
The ipod wakes/powers on together with the car's ignition.
Is there a setting to make the ipod automatically start playing a playlist at power-on?
Conversely, can the ipod be made to shutdown once the power source shuts down = car's ignition turned off.
best regards
glenn

Thank you for your reply.
Hope it counts as a suggestion for a next iteration

Best ATV-2 settings for ripping DVDs using Handbrake

I have a large dvd library that I want to get into itunes for the ATV-2 as well as the ability to use on my iOS4 devices. Can anyone share their experiences?

If you're talking about commercial, encrypted DVDs, the terms of use of these forums prohibit discussion of software or methods of breaking the encryption/copying them.
For unencrypted DVDs, Handbrake is one of the most recommended applications.
Best of luck.

Best settings for what used to be HDV, became M2V?

I have some concert footage I shot in HDV60i (on a Canon HV40). I only exported it to DVD and not to an HDV file, so all I have now is an M2V file and an audio file (AAC). Now I need to upload it to youtube, but I have to do some editing in FCP6 first. What is the best sequence settings for me to use in FCP? My second question would be how should I export it for best viewing on youtube (since it's no longer a true HDV file), but that question may be better served for the Compressor forum...any info would be appreciated though!

hi,
well a lot depends on the footage you might be using. Use the setting that matches that. Or if its graphics based use the biggest baddest HD setting you can. Of course if the finished thing is getting burnt to a DVD to be shown its all going to be compressed then and lose quality at that stage.
hth
adam

AE Composistion Settings for DVCPRO HD footage?

Slightly unrelated but giving it a shot anyways .
I have some DVCPRO HD footage. Here's the clip settings for it (digitized using Final Cut Pro).
Vid Rate: 23.98 fps, Frame Size 960 x 720, Compressor DVC PRO HD 720p60, Data Rate 5.5 MB/sec, Pixel Aspect DVCPRO HD (720p60).
In After Effects, what should my composition settings be? Or should I be going for a specific preset? Using After Effects 6.0, doesn't have a DVCPRO HD preset.

I'm not familiar with any of the formats, nor how they compare with each other when put side by side. I'm guessing whatever I get from my After Effects composition would be compatible with what's in my FCP timeline. I'm actually asking this on behalf of the editor who is also new to these new HD-related formats. Not exactly sure of his timeline settings, but when he puts in his DVCPRO HD footage, there's no rendering required. So I guess Final Cut's DVCPRO HD preset settings? If FCP has such a preset that is.
Even better would be if I could somehow export a lossless clip that I could put into my FCP timeline and render out perfectly fine. Example i'm more familiar with: using clips with no compression in DV NTSC timeline.

Settings for idempotent enterprise services in ECC

Hi,
I want to use enterprise service ECC_GOODSMOVEMENTCRTRC1 / GoodsMovementERPCreateRequestConfirmation_In_V1 within a nonSAP application to post GoodsMovements at an ECC system.
http://es-workplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=…
The service works and I can do all movement types I want.
Now I want to have idempotency activated at the ECC system.
But nobody of the ECC guys knows, what has to be done for this.
What transaction has to be used?
Is there a default value for the time frame for which the system keeps responses for already processed service calls?
If not, I would propose 100 days, because this is the worst case, the nonSAP application could send a message again.
Are 100 days to large for the idempotency time frame of an ECC system?
Regards
Roland

Now I have got readonly permission for transaction SPRO at the ECC system.
The path to the idempotency settings is:
SPRO -> SAP Reference IMG -> Cross-Application Components -> Processes and Tools for Enterprise Applications -> Enterprise Services -> General Settings for Enterprise Services -> Define Settings for Idempotent Services
Permission for transaction WSIDPADMIN is required to execute the activity "Define Settings for Idempotent Services". I don't have this.
But there is a good explanation in SPRO what has to be done in "Define Settings for Idempotent Services"
Define Settings for Idempotent Services
Use
Enterprise Services for which you need to ensure that every service call is executed precisely once are called idempotent services.
You use this IMG activity to define how long the system keeps stored response messages or details about query messages (the message IDs) for which responses have already been sent for synchronous Enterprise Services. You have to define this for each client in which you wish to use synchronous Enterprise Services.
In order not to burden the database by storing the response messages or message IDs unnecessarily long, the system schedules two background jobs to regularly delete stored response messages and message IDs:
SAP_BC_IDP_WS_SWITCH_BD for response messages
SAP_BC_IDP_WS_SWITCH_BDID for message IDs
The system uses table pairs to ensure that the response message or the ID of the answered query message is deleted as soon as possible once the set retention period has expired:
One table pair for each client for the response messages
One table pair for each client for the message IDs that have been stored
The two tables of a table pair are entered alternately. When switching from the first table to the second, the data in the first table is retained and that in the second table is deleted before the system generates new entries.
You decide how ofter the system switches back and forth between the tables of a table pair. The result is the minimum retention period for the stored data.
Requirements
This function is available to you as of SAP NetWeaver 2004s SP09 and ECC SE 600 SP03.
Activities
In the Document section, define the minimum retention period for the response messages. You do this by specifying how often you want the system to switch between the two tables.
In the Document ID section define the minimum retention period for the message IDs. You do this by specifying how often you want the system to switch between the two tables.
SAP recommends you define a longer retention period for the message IDs than for the response messages. Bear in mind that a repeated query message leads to an error if the corresponding response message has already been deleted but the message ID is still available.
To save what you have defined, choose Schedule.
Repeat steps 1 to 4 for all clients in which you wish to use Enterprise Services.
Example
You have defined the time for switching between the two tables in which the response messages are stored as two hours. This means that the response messages are kept for at least two hours but for no more than four hours.
You have defined the time for switching between the two tables in which the message IDs are stored as one day. This means that the message IDs are kept for at least one day but for no more than two days.

Registry Settings for iTunes Drivers - Missing

iTunes (7.6.2.9) Started getting a msg stating the registry settings for iTunes drivers used for importing or burning CD's & DVD's are missing. Pls re-install iTunes. Any way to restore them w/o having to re-install iTunes? Unicorn39

You can download gear drivers from the gear site:
http://www.gearsoftware.com/support/drivers.cfm
But have you tried a repair install of iTunes?

Keyboard settings for Fn - automatic using regedit

Similar Messages

Maybe you are looking for