Keyboard shortcuts problem issue after updating to 6.0.5

Directly after installing this update, Command+SpaceBar on the Mac no longer temporarily selects the zoom tool? Not sure what others keyboard shortcuts might be broken, but this is a very standard one. I have a book due on Monday!!! Any help would be appreciated? Thanks!
Not sure if related, but my computer started lagging and freezing directly after installing this update, and continues to the next day, even after repairing permissions, trashing prefernces, trashing SavedData cache, etc.

That totally fixed the shortcut issue!! Fixed in InDesign and Illustrator. Will keep you posted on the computer lagging and freezing issue. Our IT guy thinks it may have something to do the Adobe Updater itself. But we'll see.... thanks so much!

Similar Messages

Tool Palette issue after updating Photoshop CS5 to version 12.0.2.

When leaving or hovering the mouse cursor over the Tool Palette in Photoshop usually a small window appears to indicate the name of the tool and keyboard shortcut. However, after updating Photoshop CS5 to version 12.0.2 the small window shows but it is now a blank space. I have uninstalled and re-installed Photoshop CS5 and updated again and this problem persists. Now I wish that I should not have updated from version 12.0.1. Do any other Photoshop CS5 users are seeing this problem?
p.s The Tool-Stack window works fine, when clicking the mouse for a second, and tools are selectable.
The operating software I am using is Windows XP Pro 32 bit.

This is a known problem with the update, and Adobe is working on it.
Please see the thread on tooltips, also current in this forum: http://forums.adobe.com/thread/762392?tstart=0
-Noel

A possible solution for "foreight language keyboard shortcut" problem...

Hi(Bonjour)!
Everyone know the problem of losy keyboard layout when Final Cut is used with foreight language keyboard. We loose the COMMAND-Q shorcut.
As PieroF suggested in many posts in final cut express forum, there is a workaround:
"+I just installed Leopard and I ran into this keyboard shortcut problem.+
+I can confirm that:+
+a. the problem exists also with the Italian keyboard (in addition to other languages, as pointed by other posters)+
+b. the workaround I described in my previous answer works fine :+
+- close FCE (if open)+
+- open System Preferences/International/Language+
+- drag English to the first place on top of the other languages+
+- drag your own language (Italian in my case) again on top of English (at the end the window will show the same original settings, but something happened in the heart of Leopard...)+
+- close System Preferences+
+- open FCE: now all shortcuts work as expected, and are correctly listed with their corresponding menu commands+
+It's a workaround, it's not convenient (I'd better have this bug fixed), but apparently you have to apply it only once for each system startup.+
Piero "
As stated by Piero, you have to follow this procedure after each computer startup.
I found a way to restore the COMMAND-Q shortcut with the keyboard and mouse system pref panel.
Simply add Final Cut application and add a +custom shotcut+. Be careful to type exactly the "Quit Final Cut Express" menu.
This solution allows to restart the computer.
It's work with Final Cut Express and Final Cut Pro under Leopard 10.5.4.
Michel Boissonneault

Hi Michel,
I like your suggestion because the keyboard shortcuts defined in the system preferences do not require redefinition at each startup. So in theory we could define all missing/wrong shortcuts this way, and not only the cmd-Q as you suggested. Boring, but we could do it once for all.
The only problem is that I don't know how to define shortcuts for submenus, for example "Render Selection/Both": it seems system preferences allows only to define shortcuts for the menu ("Render Selection" - in this case absolutely useless) but not for the submenu.
Do you know a way ? (I looked in the help, which didn't... help).
Piero

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating t

only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
iPhone 4, iOS 6.1.2

Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!!

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forc

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forcing close again? does anyone have a solution to the above problem?

You mean the default OS X mail app? Try reinstalling OS X Yosemite if that's the case.
If you are referring to 3rd party mail applications, that's a compatibility issue. Some apps don't work in the new operating system. You have to wait until the developer updates the app, or you have to revert back to Mavericks to continue using it.

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

Keyboard shortcuts keep vanishing after reboot/restart

Hello,
In System Preferences -> Keyboard&Mouse, my keyboard shortcuts frequently vanish after a reboot/restart. This happens over 60 percent of the time and I have to enter them all over again. Very irritating.. Is this a known bug? And is there any way to really 'save' keyboard shortcuts?
Thanks,
kds-kds

I have the same problem but it only appears to be with one device (iPhone 5). My iPad and Mac seem to be fine. I even tried a hard reset of the iPhone but that did not help.

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

IPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Problems detected after updating to iTunes version 11.1.3.8

Problems detected after updating to iTunes version 11.1.3.8 for Windows 7 Ultimate 64-bit version, Service Pack 1.
USB connected iPhone 4 (iOS 7.0.4) is not recognised in iTunes.
Sluggish response when starting iTunes.
Any known remedy?

After updating to the newest version of iTunes which is 11.1.3.8, I can no longer edit song information because whenever I click Get Info, the program crashes. It says, "iTunes has stopped working...". I literally tried all the troubleshooting techniques here but to no avail!
I already:
Reinstalled iTunes and other related programs like a hundred times
Scanned my computer for viruses
Opened iTunes on another user account
Opened iTunes on safe mode
Removed unusable configuration files
BUT STILL, the problem persists. I have the same version of iTunes on my office computer and it works perfectly fine but I want my iTunes here at home to get fixed. Never had problems with editing song information until I updated it to 11.1.3.8.
I just don't know what to do anymore. I updated this program last January 1 and until now I haven't found any solution. It's really getting on my nerves!!!

I use reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some er

i used reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some error, Now i cannot use the internet !!! and itz the latest version of reliance software,,, plz help me !!!

At last i did some experiments and it solved my problem... heres the solution :
1. Install the reliance drivers and software from their website.
2. As the reliance software is not supported my mavericks it wont open, but dont worry.
3. Now after installation go to system preferences->network->and select "ZTE Wireless Terminal".
4. Configuration: Default
     Telephone number: #777
     Account name and password should be the owners number.
5.Finish ! press apply and click Connect...
   Enjoy browsing !!!

Keyboard shortcuts problem issue after updating to 6.0.5

Similar Messages

Maybe you are looking for