Keyboard shortcuts (vs. Windows)

In the now locked "Better than Windows" thread in the Tiger Installation & Setup forum, Wade Peeler commented as follows:
The fact that you can't restore a minimized
application via the keyboard is an oft-requested
feature ...
Unless I'm missing something, you can do this using the Control + F3 key procedure I outlined in a post to that thread. I'm discovering it's actually a very well thought out feature:
• Even if you have Dock hiding turned on, the keystroke combo pops it up.
• Whatever was last selected by this method is retained as the initially selected item, even if you have used the pointer to select another Dock item or otherwise switched to another application.
• The arrow keys select among apps & are smart enough to honor the vertical or Dock options -- navigate through horizontal Docks with the left & right keys & through vertical ones with the up & down keys -- just as you would intuitively expect.
To select any Dock item, you just press Return.
{infomercial voice-over} But wait, there's more! {/infomercial voice-over}
• Say you don't just want to restore an application minimized in the Dock, but instead want to access the docked item's pop up contextual menu. Once you select it with the arrow keys, instead of hitting the return key, hit an arrow key that points in the direction that the menu would pop up in (up/down for horizontal Docks & left/right for vertical ones). The menu then pops up & once again you use the arrow keys to select any menu item you want from the list.
• If the contextual menu has a sub-menu, you can continue to navigate in this fashion with the arrow keys: if left arrow moves you into the sub-menu, right arrow moves you back to its parent.
• If you decide to bail out of the feature without activating anything with the return key, either hit Control + F3 again or the Escape key, & you are retuned to where you were before.
• Since the Dock can hold just about anything, the possibilities are almost limitless. For instance, I keep a folder in the Dock that is just a collection of folders containing aliases, organized by functional groups: favorite utilities, video apps, games, & so on. Since the actual folder lives in my Home Folder & contains nothing but aliases, I can name any of the items as I like & control their order in the popup menus & submenus with prefixes (like a "•" to move something to the top of the list). Moreover, some of these aliases are to files that launch apps via a setup file in a particular state (like a SuperDuper backup settings file). Since I'm an AppleScripter, a few of them perform complex actions, complete with state-dependent tests & logical branching. If you wanted to, you could even put an alias of your startup drive in the Dock, & navigate through the entire file system this way!
{infomercial voice-over} Now, how much would you expect to pay? {/infomercial voice-over}
iMac G5/2.0 GHz 17" ALS (Rev B)   Mac OS X (10.4.10)   1.5 GB, Kensington Trackball

Hi J,
running Windows on your MBP is like running Windows on any given computer, so all the well known keyboard shortcuts will work according to Windows standards.
Whether your wireless Windows keyboard will work with the MBP merely depends if you can sync it with your MBP.
There have been numerous posts round here, that are mentioning that at least with the Wireless Apple keyboard there are quite some difficulties maintaining a stable connection.
Regards
Stefan

Similar Messages

  • Converting Mac keyboard shortcuts to Windows/PC based shortcuts.

    Hello,
    Let me say, I have been using Mac based platforms since close to 1991 on and off. I used System 7 (and OS 8/9, but close enough to System 7) for many years up until I started to use Windows starting on the later 9x and XP platforms. As I start to drift away from Windows to more likely use Macs, however I would like to have a consistent keyboard shortcut system similar to Windows or Linux/UNIX (for that matter).
    I actually get confused very easily switching from Macs and Windows with keyboard commands often when I use Windows comp and when I am using the Mac. (Just switching from different kinds of keyboards confuse me from the razor thin keys to a regular keyboard, because going from another one confuses me because of different pressures to press the on.)
    I also believe this may have to do with a "workflow" process/scripting, if I am not mistaken. Is there a script I can download, that has close to the standard Windows/PC commands that I can import into the Mac, and can these scripts be edited to adapt my own commands as well? Is there a way to use most of the function keys (F1-12) for the standard commands for the different purposes? I also would like the Option (alt)-Tab to cycle the different apps and Option-Esc to cycle all windows opened. I would like to try to reduce all Option/Command/Control/Shift commands to just a couple of keystrokes or an F key. These modifier keys I think are becoming old, especially since it doesn't meet Apple's simplicity, giving there is up to three keystrokes to press at a given time for some commands.
    I had tried the way on the System Preferences, but it doesn't go globally through all applications - real problem lies on the Apple apps on some. I strongly believe this is possible to do, since it might be able to work via a scripting system. I hope this could work. Apple has come a long way to open up the system's architecture without really messing things up, or just opening up the OS without hex apps is great. I hope they can just keep this up so the users can decide how they want their mac to work, because they know what's right for their purposes.
    Thanks in advance,
    Steven

    You may like youpi key. It is free. It works fairly well for me in MAC OS 10.4 although not officially supported. There is a commercial version you can buy, called iKey.
    http://www.versiontracker.com/dyn/moreinfo/macosx/11485&vid=75326
    Here is my script for listing my application folder. I have it assigned to function-key 6.
    tell application "Finder"
    activate
    select window of desktop
    make new Finder window to startup disk
    select Finder window 1
    set target of Finder window 1 to folder "Applications" of startup disk
    select Finder window 1
    set position of Finder window 1 to {60, 45}
    end tell
    This script was automatically generated in script editor record mode. After I recorded the script and did some minor editing, I copy the script to youpi key.
    I have all of my frequently used applications set to function keys. I am thinking of changing the switching to Scripts because there seems to be a side effect to some of the switching like the speaking.

  • Lightroom 5.5 doesn't recognize 'Shift + numeric keypad number' keyboard shortcuts in windows 7

    Some Lightroom keyboard shortcuts, e.g. color labels recognize the numeric keypad on my windows pc. When I press 6 it sets the color label to red. According to the keyboard shortcut guide, pressing Shift then a number key should set the color label and move to the next photo. Instead, when pressing a number on the number keypad it recognizes Shift + 6 as a directional arrow, as printed on the key below the '6' and simply moves to the next photo without setting a color label on the first photo. The same applies to the 1, 2, 3, 4, 7, 8 and 9 keys on the keypad. They all have a directional function associated with them.
    I do not have this problem when pressing Shift + a number key along the top of my keyboard. These combinations work as expected.
    Does anyone know how I change the number keypad to behave the same as the number keys at the top of my keyboard?
    Thanks - Michael

    Try booting the fallback kernel, there is a problem with the AHCI driver concerning new Macbooks. When you've booted, add ata_generic to the modules in /etc/mkinitcpio.conf and rebuild the initrd with mkinitcpio -p kernel26.

  • Keyboard shortcuts cause window deselect

    Hi everyone,
    I've been having a strange problem with Photoshop CS6 since upgrading to OSX Mavericks a few weeks ago. Whenever I use a keyboard command repeatedly ie. to increase or decrease a brush size it will work for the first few presses but will then become unresponsive and seemingly deselect the Photoshop window. I then have to click back onto the canvas before continuing to adjust my brush size. It's an annoying issue which is starting to really slow down my workflow.
    I tried resetting my prefences in the hopes that would fix the error, unfortuntately that didn't do the job.
    Does anyone have any thoughts on how I could tackle this problem?
    Thanks very much!

    Have you used the "Sync Now" option?
    The reason I asked is that I tried that option but typed in the wrong email address and that resulted in the keyboard shortcut window not opening on my laptop.
    I got a "Sync failed" error message but after I typed in the right address on my main computer, syncing was successful and the keyboard shortcut window reappeared
    on the laptop.
    HTH

  • Why is up next adding songs twice when I use the keyboard shortcut? (windows)

    I only encounter this using the mini-player
    as far as I know, at least; because the keyboard shortcut doesn't even work on the full sized player.
    augh.

    You should post that on the Boot Camp  forum, that is where all the Boot Camp and Windows guys hang out.
    Good luck.

  • How can change keyboard shortcut from windows media player to itunes?, how can change keyboard shortcut from windows media player to itunes?

    I have ASUS N55SL (with Windows 7) and my keyboard has music shortcut keys (like play,Stop,...) but work with Windows Media Player I want change this shortcut key to Itunes!

    Just import the music into iTunes from wherever it is on your hardrive.

  • Keyboard Shortcuts and Window Grouping not working Gnome 3

    I recently installed arch with Gnome 3.6.2. Opening a terminal (ctrl+alt+T) was not defined so I made a custom launcher for it.
    However, between restarts, this custom launcher stops working. Also, Window Grouping (alt+~) while context-switching works intermittently between reboots. I can't figure out what might be causing the problem as dmesg does not show anything.
    Any help would be appreciated! Thanks a lot!
    V
    Last edited by vellvisher (2013-03-31 04:21:17)

    Mohanaraj CS schrieb:
    Hi torben123,
    This issue has been resolved in Flash CC, please take a look at it and let us know if you still face any issues.
    Thanks!
    Mohan
    Mohanaraj CS, I'm still using Flash Pro CS6 on my MacBook Pro and the shortcuts don't all work correctly because Flash (German version with German language keyboard setting in OSX) seems to use an US keyboard setting only for the shortcuts internally (if I type into fields, I've got my German layout, but if I want to set up a shortcut like cmd + + for zoom in oder cmd + - for zoom out, it shows cmd + ] and cmd + / instead).
    And the "fix" to an obvious bug (as you said by yourself) now is TO BUY CC??
    Come on, Adobe Staff, is that how you treat your customers?
    A little -known- bug but you have to get (and buy) the cloud thing, if you want it fixed... did you get the bug into the code THEREFORE in the last update?
    I really love the Adobe software but this is the baddest joke since a looong time, Mohanaraj CS.

  • Keyboard shortcuts; close windows

    "option-close button" is said to "close all open windows"  In fact, it appears that it only closes open windows in one application.  Have I got this right?  Is there a shortcut to actually "close all open windows" in multiple applications?  I seem to recall old OS did this with "option-close".....Philip

    My I ask what your purpose it to close all Windows?
    As I'm sure you know that just closing an open windows in most any program on a Mac does not close the program.
    If you are trying to get to the main desktop you can use Mission Control for that and there is a shortcut to do that.
    IIRC it is the F11 function key and if you are using the function keys for volume, screen brightness and the like then it is fn+F11.

  • Muse Windows Keyboard Shortcuts

    Can I get access to the source file for the Adobe Muse Keyboard Shortcuts, English, Windows (updated April 2013)? I am assuming that it is an InDesign file. My problem is: The type is set so small that my aging eyes cannot read it without usingt a magnifying glass. I wish to revise the layout of the 2 sheets and set the type in 14 pt. type so that I can see the shortcuts with a glance. Help please.  Also, there is a typo in the headline, Shortcuts, that runs vertically on the left side of the page.
    Thank you.
    Judy Durkin
    Adobe Education Leader
    Tainan, Taiwan

    HI Judy,
    Did you check the following page, if it is what you are looking for
    http://helpx.adobe.com/muse/tutorials/muse-keyboard-shortcuts.html

  • Need to use a specific windows keyboard shortcut on Mac

    I need to use a specific keyboard shortcut for a program that I am running (via Parallels) but the same keyboard shortcut is used in OS X to take a screen shot of a window via dashboard, which takes precedence over the command I am attempting to use.
    The keyboard shortcut in "Windows-Speak" is Shift-Ctrl-W.  What are my options here? Can I deactivate that shortcut in OS X?

    CrossOver is a program that lets you run some Windows software withhout installing Windows. The emphasis is on some. At their website Crossover rates the supported software on a scale from Bronze to Gold - if the program you need to run is supported at the Gold standard you will probably be okay. Silver and Bronze ratings means the rated Windows software will run but with glitches or even missing functionality. (Silver being better support than Bronze, obviously.)
    Virtualization solutions such as VirtualBox (or the more capable and feature laden Parallels Desktop and VMWare Fusion) let you install another operating system (and software) to use at the same time as you use your Mac software. It is a nifty solution and while virtualization isn't quite as fast as running an OS totally native (BootCamp) the speed hit isn't all that significant and affects graphics rendering more than anything else.
    I'm an IT instructor and software trainer and about 80% of this work involves Windows software. I do it using a Mac computer running Windows in Parallels Desktop. If it weren't for the Apple logo on my notebook no one would know I'm using a Mac - and the notebook in virtualization feels faster than the cheap Dell computers we use.

  • Access Keys / Keyboard Shortcuts / Mnemonics

    I am trying to use the SetAsFunctionKey method and FunctionKeyPress
    event to define keyboard shortcuts for window widgets such as buttons on
    a Windows 95 client running Forte 3.0.E.
    If I add the ampersand (&) to the caption of a button, the letter
    following the ampersand is underlined. Normally, in other development
    tools such as Visual Basic, if you do this for a button, then clicking
    the ALT key along with that one letter automatically fires the Click
    event for the button. There is no other coding necessary. I basically
    have two questions:
    1. Is there a better way of implementing this in Forte, other than using
    the SetAsFunctionKey method?
    2. If not, I have the following dilemma. My application consists of a
    main window and several nested windows. The nested windows do not have
    their own event loops, instead, they have Event Handlers that are
    registered in the parent window. Both the parent window and its nested
    windows need the keyboard shortcuts and would therefore need to register
    for the FunctionKeyPress event. The problem is if I register for the
    event in the nested window, the registration of that same event in the
    parent window is overridden, effectively disabling my ability to process
    the keyboard shortcut for the parent window. I am assuming that since
    there is only one event loop in this scenario, it is the only one that
    receives the FunctionKeyPress event. Is there any way to make this work
    without making the parent window aware of all the keyboard shortcuts of
    its nested windows?
    Van Vuong
    Lead Technical Analyst
    Office: 972.985.5289
    VoiceNow: 972.330.0822
    Internet: [email protected]
    PAGE NET

    You are right Dave, Windows 95 also generates the beep. I just hadn't
    noticed it before. If you or anyone else finds a way to suppress this
    behavior, please let me know.
    Van Vuong
    Lead Technical Analyst
    Office: 972.985.5289
    VoiceNow: 972.330.0822
    Internet: [email protected]
    PAGE NET
    From: Dave Dixson (Ext. 513)[SMTP:[email protected]]
    Sent: Friday, October 03, 1997 10:43 AM
    To: Van Vuong
    Subject: RE: Access Keys / Keyboard Shortcuts / Mnemonics
    I am using forte 3E under NT4.
    I also can capture the speed key press, but I cant stop the warning
    beep that is generated automatically by windows. Maybe this doesnt
    happen under win95, or maybe you have the warning beep turned off in
    your control panel.
    Dave.
    -> From: Van Vuong <[email protected]>
    To: "'Dave Dixson (Ext. 513)'" <[email protected]>
    Subject: RE: Access Keys / Keyboard Shortcuts / Mnemonics
    Date: Fri, 3 Oct 1997 08:51:12 -0500
    Which version of Forte are you using? I wrote a quick test program using
    3.0.E and contrary to the documentation, I am able to capture the
    Alt-key shortcut on my Windows 95 client.
    Van Vuong
    Lead Technical Analyst
    Office: 972.985.5289
    VoiceNow: 972.330.0822
    Internet: [email protected]
    PAGE NET
    From: Dave Dixson (Ext. 513)[SMTP:[email protected]]
    Sent: Friday, October 03, 1997 3:38 AM
    To: [email protected]
    Subject: Re: Access Keys / Keyboard Shortcuts / Mnemonics
    I have also used the SetAsFunctioKey method to implement Alt-Key
    shortcuts, but have found that because windows does not recognise my
    pretend shortcut, it beeps a warning whenever the Alt-Key combination
    is pressed.
    Has anyone found a way of stopping this from happening (without
    changing the window control panel settings).
    Dave.
    From: Van Vuong <[email protected]>
    To: "'Forte Users Discussion'" <[email protected]>
    Subject: Access Keys / Keyboard Shortcuts / Mnemonics
    Date: Thu, 2 Oct 1997 18:47:29 -0500
    Reply-to: Van Vuong <[email protected]>
    I am trying to use the SetAsFunctionKey method and FunctionKeyPress
    event to define keyboard shortcuts for window widgets such as buttons on
    a Windows 95 client running Forte 3.0.E.
    If I add the ampersand (&) to the caption of a button, the letter
    following the ampersand is underlined. Normally, in other development
    tools such as Visual Basic, if you do this for a button, then clicking
    the ALT key along with that one letter automatically fires the Click
    event for the button. There is no other coding necessary. I basically
    have two questions:
    1. Is there a better way of implementing this in Forte, other than using
    the SetAsFunctionKey method?
    2. If not, I have the following dilemma. My application consists of a
    main window and several nested windows. The nested windows do not have
    their own event loops, instead, they have Event Handlers that are
    registered in the parent window. Both the parent window and its nested
    windows need the keyboard shortcuts and would therefore need to register
    for the FunctionKeyPress event. The problem is if I register for the
    event in the nested window, the registration of that same event in the
    parent window is overridden, effectively disabling my ability to process
    the keyboard shortcut for the parent window. I am assuming that since
    there is only one event loop in this scenario, it is the only one that
    receives the FunctionKeyPress event. Is there any way to make this work
    without making the parent window aware of all the keyboard shortcuts of
    its nested windows?
    Van Vuong
    Lead Technical Analyst
    Office: 972.985.5289
    VoiceNow: 972.330.0822
    Internet: [email protected]
    PAGE NET
    DaVE
    Triad Group PLC, EMail:[email protected]
    GU7 1XE, England. Tel: 01483 860222 X 513
    DaVE
    Triad Group PLC, EMail:[email protected]
    GU7 1XE, England. Tel: 01483 860222 X 513

  • Why does Lightroom not have custom keyboard shortcuts?

    Lightroom is a workflow app. It's not just about raw conversion, which could be done in ACR, but about speeding up the whole process of selecting, editing and cataloging photos. 
    It seems to me that out of all Adobe apps, Lightroom is the one which should have customisable keyboard shortcuts.
    I've been using lightroom since shortly after it came put and I've been using the open-source plug-in keyboard customizer Paddy for several years which works okay at the moment. Each lightroom release breaks Paddy in some way and it's not as smooth as it could be if it was built in. Even so, I estimate I'm 2-10 time faster editing many photos with paddy than I would be without.
    I know that even adobe's resources are limited, but adding keyboard shortcuts should be easy, certainly compared to re-verse engineering RAW file formats or fixing complex lens distortions!
    At this point it seems clear that Adobe are choosing not to let us customise keyboard shortcuts. I'm not trying to change their mind, but I really want to know w
    It perplexes me, why don't Adobe add what seems liek a simple feature which could speed up Lightroom use by an order of magnitude???

    On Victoria Bampton's website she has a downloadable PDF file named "Adobe Lightroom 5 Windows Keyboard Shortcuts." (Windows, not sure about Mac). Its about 12 pages long. I assume that this is what you are looking for. www.lightroomqueen.com.

  • My keyboard shortcuts have quit working - HELP!

    All,
    Can anyone tell me WHY my keyboard shortcuts—new window, close window—have quit working.
    It's a pain in the tuckus to have to open a window with a menu.
    It happened suddenly and would appreciate a fix if anyone has the same problem.
    Thanks!

    I change my Spotlight shortcut to Ctrl + Space and have no problems. I've never had a problem with use the Space Bar to get the Hand tool.
    Try restoring your preferences first before you take the trouble to reinstall. Here's how:
    http://pfl.com/trb

  • Keyboard shortcut. JVM bug?

    I have an applet where I want to simulate keyboard shortcuts standard windows behaviour.
    I want to be able to navigate between Components by pushing alt + some key.
    I have a key- listener catching key events, testing isAltDown() and transferring focus. It all works just fine...
    Now, if I have focus in a java.awt.TextField, or java.awt.TextArea, and push for instance alt+a, I get an 'a' typed in the TextComponent in addition to the transfer of focus.
    This happens only when running Sun plugin for IE.
    Is it supposed to happen?
    How do I stop this from happening?
    Thx,
    Ragnvald

    Solved.
    - I forgot to consume() the event.
    Now it works on any VM!

  • Importing / Transferring Keyboard Shortcuts into Photoshop CS5

    Hello, i am testing out Photoshop 5 and it looks good so far, yet some obstacles are left to solve. For example i wonder how to get the keyboard shortcuts from my old Photoshop (the .kys file) into the PS5? There is no import. I would even manually transfer, but opening the file in a texteditor just shows weird stuff (there was a guy who manually transfered his indesign shortcuts in such a way, but since he used a normal text editor i guess these files are of a different structure)
    http://forums.adobe.com/message/2881861#2881861
    if anyone knows how to transfer them or has an idea how to manually workaround, i am happy for hints.
    thanks
    Sofian

    It depends on which windows system you have, but for vista and windows 7, probably the best
    place to put the kys file is:
    C:\Users\Your Name\AppData\Roaming\Adobe\Adobe Photoshop CS5\Presets\Keyboard Shortcuts
    Added:
    Windows XP:
    C:\Documents and Settings\Your Name\Application Data\Adobe\Adobe Photoshop CS5\Presets\Keyboard Shortcuts
    MTSTUNER
    Message was edited by: MTSTUNER

  • Pr CS6 - How to export keyboard shortcuts ?

    Hi all,
    I would like to export my keyboard shortcut and windows layout from Première CS6 to another station...
    The informations I've find out concerning Première doesn't work with CS6, any idea?
    Thanks a lot!

    In the Shortcuts dialog, there is a Save As... option.

Maybe you are looking for