Keyboard stopped working after upgrading to Windows 10

I just upgraded my HP Pavilion X2 to Windows 10 and the keyboard stopped working.  Is there an update from HP that can correct this issue?

, Hello and thanks for posting on the HP support forums.  The only option you have at the moment is to run the windows update troubleshooter and run any update recommended or optional.  If that does not fix it then you will need to roll back to the original supported operating system the x2 was built to run on. Here is the link for the troubleshooter. http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter Please let me know how things go.  Thanks again for the post and have a great day. 

Similar Messages

  • Hi,catalyst control centre has stopped working after upgrading to windows 8 .

    Hi,
    i have a hp envy-6 notebook pc(Product number: B4P24PA#ACJ,Serial number:  [Personal Information Removed] , which comes with windows 7 home basic! after upgrading to Windows 8 Pro 64-bit operating system ,my catalyst control centre ,host application has stopped workiing .
    i have tried almost everything i could do but the problem still persists
    on every time restarting pc it displays the above error message.
    regards
    abhishek rao

    Hi,
    Have you checked in the Device Manager to see if all drivers are installed since upgrading? (look for yellow exclamation points)
    Uninstall the AMD driver and catalyst control center. Install the version  located in the download section of the web support portal for your sleekbook.It will install both driver (intel and AMD) and also switchable graphics capability if it previously existed.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • WiFi (Key) stopped working after upgrade to Windows 10

    I thought I would post this on the forum for those who are having the same problem because help for this issue is few and far between compared to the number of pleas for assistance from HP owners. When I upgraded to Windows 10 on my Pavilion, the WiFi stopped working and I could not turn it on using the hot key (F12). I searched for answers and worked hours trying to solve it until I came upon the only suggestion that worked for me: I had to disable fast boot (power options, change what the buttons do, "change settings that are currently unavailable" (?!?)) , so I could get into the bios and then I went into the bios by pressing f10 during boot.  Reset them to defaults.  (Changed from default back to what I wanted) saved and the wifi button turned white after pressing during windows 10 boot up. EDIT: If it does not turn on right away, try turning it on through the wifi settings. I hope this can help a few, who like me, struggled endlessly for a problem that few HP mods seem to be responding to. Cheers.

     
    Satellite S55t-A5389 (PSKK2U-028002)
    Put your part number (PSKK2U-028002) in here. It will take you to a page that has 12 Windows 10-compatible downloads. Unfortunately, a WiFi driver is not one of them.
    But there is this:
    Your selected Toshiba PC is supported for upgrade to Windows 10, but not all of the software for the upgrade is available at this time. Additional software will be posted here when it is ready. Please check back at a later time.

  • [SOLVED] Keyboard stopped working after upgrade

    When Arch boots into the login window, keyboard has stopped working (it works in the boot screen, tested with Caps Lock). The mouse is working. I have installed Arch to a laptop and configured Arch to use EFISTUB to boot. I have already confirmed that the kernels and initramfs' in theESP (Arch's kernel, initramfs and fallback are in /boot/efi/EFI/arch. ESP in mounted as /boot/efi) and in the /boot are the same.
    I don't see any FAILED messages during the boot screen.
    Here's the Xorg log: http://pastebin.com/qXwqR3vf
    And lxdm.log http://pastebin.com/DF9bF4R8
    I am running the linux-lts kernel.
    Last edited by kataja (2014-09-21 09:50:14)

    This was caused by a simple reason: keyboard file "en" was missing in the xkbcomp directory. That's od because I haven't touched keyboard settings at all. I changed the keyboard setting in X11 confiure file to "us" as test and now it works.

  • Keyboard not working after upgrading to windows 10

    I have upgraded my yoga pro 2 to windows 10, the keyboard works only in login screen after starting windows the keyboard is getting disabled, only the first line function keys are working.
    Please help

    , Hello and thanks for posting on the HP support forums.  The only option you have at the moment is to run the windows update troubleshooter and run any update recommended or optional.  If that does not fix it then you will need to roll back to the original supported operating system the x2 was built to run on. Here is the link for the troubleshooter. http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter Please let me know how things go.  Thanks again for the post and have a great day. 

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • My Microsoft Office 2004 stopped working after upgrading to MT.  How can I get it to work, or, how can I uninstall MT?

    My Microsoft Office 2004 stopped working after upgrading to Mountain Lion.  How can I get it to work again, or, how can I uninstall MT?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • Microphone no longer works after upgrade to windows 8.1

    After upgrade to windows 8.1 my internal microphone no longer works.
    I tried installing updates suggested in other posts with similar driver problems but they did not work.
    HPSupportSolutionsFramework-en-11.51.0048 did not work.
    My internal microphone is IDT High Definition Audio Codec
    When I go through the control panel  and look at it - it shows a status of "not plugged in"
    Please help 
    thanks

    OK I am a little confused.
    There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
    However I just received the following email from you:
    Hello gordml,
    The questions you posted on the HP Support Forum recently received one or more answers.
    Question: Microphone no longer works after upgrade to windows 8.1
    Date: Sun Dec 21 01:01:56 PST 2014
    View the answer(s).
    Did this reply resolve your post or question?
    If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
    You can also show your appreciation by giving kudos.
    We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
    Thanks for being a member!
    The HP Support Forum Team"
    Why would this be sent to me if there has been no recent replies on this issue?

  • Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
    I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

  • Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

    My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
    Help please

    Hi asalamk,
    The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
    You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Why did AME stop working after the last Windows 7 update

    AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

    Try to delete the following folders and then launch AME:
    %AppData%\Adobe\Adobe Media Encoder
    %AppData%\Adobe\Common
    Make sure to first make a backup of those folders.

  • Touchscreen stopped working when upgraded to Windows 8.1

    I have an HP Pavilion Product EOK22UA#ABA and Model 14-1027cl (I think?) and when I upgraded to Windows 8.1, the touchscreen has stopped working. I've looked through the forums and I can't find someone with the same Product/Model as me and I'm trying to find a solution to this. I do not want to do the "Refresh your PC without affecting your files" because I have programs on my computer that I cannot get again because they were downloaded on education licenses (I am a college student) and I can only download once. Any suggestions on how I can get my touchscreen up and running again? Thanks.

    Hello @s_jensen,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that the touchscreen on your notebook computer has stopped working since upgrading to Windows 8.1, and I would be happy to assist you in this matter!
    Since your system may still have an older version of AMD graphics drivers installed on your computer, I recommend uninstalling the Windows 8 graphics drivers and installing the compatible ones for Windows 8.1. To do this, I recommend removing the drivers in Programs and Features and the Device Manager. Once the old software is removed, please restart your computer.
    The drivers for your graphics card and touchscreen can be downloaded below:
    AMD High-Definition (HD) Graphics Driver and
    AMD High-Definition (HD) Graphics Driver
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My work e-mail stopped working after upgrading to 5 ios.

    My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

Maybe you are looking for