Keyboard stuck in caps

I'm really hoping I can get some help with this asap. So my mackbook pro seems to be stuck in caps lock, however the caps key is not stuck and neither of the shift keys are stuck either. Upon booting up the keys make a sound like they are locked or something, but will then start working in caps again. I cannot log into the computer as my password is all lowercase letters. I have tried restarting, plugging the charger in, pressing the option key five times (in case the problem is mouse keys), as well as starting it in safe mode. I have tried to reset the SMC but all that seems to do is boot it in safe mode. I have also tried to reset the PRAM and again it doesn't work, doesn't restart the computer but instead opens OS X Utilities. I have been trying all of these methods for the past 5 hours and nothing is working at all. If anyone has any input or suggestions it is greatly appreciated!
Cass

Hello there casslun,
It sounds like you have a few keys that aren't working correctly. It seems to me like you have done all the troubleshooting I would have. Next you should have the computer looked at, as it seems you may need a repair. 
Apple - Support - Service Answer Center
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

  • Keyboard stuck on Caps

    My MacBook keyboard is stuck on caps and if I press comma or full stop I get < and >. Im speaking to apple & they tellin me it has to be collected to be fixed!! Surely its a matter of just changing settings or something? Please help!!

    BeebsK:
    Welcome to Apple Discussions.
    Whether the problem your issue is hardware or software related we cannot determine remotely. Apparently neither can Apple. If there is an Apple Store in your vicinity you may want to make an appointment at the Genius Bar. If not you will need to follow the directions given by Apple.
    cornelius

  • Wireless keyboard stuck on caps lock and green led goes out

    my Imac wireless keyboard works intermittantly.I put fresh alkaline batteries in and it is still intermittant.The small green led comes on for a few seconds and the goes out.it also seems to be stcuk in the upper case.
    It is about 2 years old and have never had this problem before.Also,there is no other electronics within 3 feet of the computer.
    Help would be appreciated.

    Please do both a iMac SMC and PRAM reset

  • IMac starting in safe boot won't accept p/w as stuck on caps?

    Hello
    My iMac OSX opens at 'safe boot'' screen and requests password. Won't accept password as stuck in caps (I have checked keyboard and it's fine) and my password is not in capitals! Any suggestions would be very gratefully received.
    Many thanks

    Have you tried a PRAM reset?
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Do you another wired keyboard you could use to see whether the existing keyboard has developed a problem.

  • Computer stuck in caps lock

    My Macbook air is stuck in caps, no caps lock key lit, though it can light up when tapped. I tried checking for stuck keys, nothing. I also rebooted SMP. nothing. everything is in caps, including character keys. It shows the computer in boot screen with SAFE BOOT in red top right corner. Help?

    Using the external keyboard, try a PRAM reset:
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Excerpt from: http://support.apple.com/kb/ht1379

  • My macbook pro  is stuck in caps lock, among other problems

    my macbook pro (now leopard 10.6) is stuck in caps lock, no matter if the caps lock key is on or if I use shift, and windows close very slowly. I also can't erase the hard drive with my Mac OS X dvd. I can't login because my password requires numbers I can't access due to the caps lock problems, but sometimes it randomly logs me in without asking for my password.

    Which version of OS X is running on the machine? When you say that the installation DVD is 'stuck' do you mean physically stuck in the machine and you cannot boot from it?
    Unless your running Lion or Mountain Lion, both of which have Recovery partitions, I would think that you're simply 'stuck' if you cannot boot from the DVD. At this point, I would take the machine to an Apple Store or an AASP for a free diagnosis and repair estimate. If it turns out that you've a failed hard drive, of course, you can always replace it yourself.
    Clinton

  • Wireless keyboard light on caps button does not come on

    wireless keyboard light on caps button does not come on

    Hello:
    That is some sort of anomaly that I have also noticed.  On the rare occasions when that happens, a restart corrects the issue.
    Barry

  • All text I do on PSE 13 is stuck on caps lock. Any solutions?

    Hey guys, as the title says, my PSE13 has all of its text stuck on caps lock.
    I'm on a licensed version for a Mac, which I got just the other day.
    And yes, I'm a noob, so please bear with me. Thanks!

    bump. Anyone? This is driving me insane. Thanks!

  • B570 Keyboard Issue.... Keyboard stuck key issue....

    Okay...
      Earlier in February, My sister accidentally spilled sweet tea (That's right, Sweet Tea) on My BIBB Laptop... After letting it dry for a few days, I found out that the Main Keyboard needed to be replaced, so I bought a replacement Keyboard in June...  However, when I plugged it in to my Laptop and tried to start it up, This error occurred:
    Error: (I Can't remember the number) Keyboard Stuck Key.
    After Unplugging the replacement keyboard (Which is in Great Condition...) I restarted the Computer with my USB Keyboard Connected and it started up fine.... After logging in, I tested my replacement keyboard by plugging it in, and found out that both Shift keys, Backspace keys, arrow keys, and the Number pad on the far right of the Keyboard weren't working....
    A friend of mine told me that it was a Motherboard problem and the laptop would have to be replaced, But now I Don't know what To do now....
    My question is:
    Is there a way to fix this without replacing the whole Laptop? And if so, How?

    I'm unable to find any information on Seacreate.  Are you sure it's spelled correctly? 
    Try running a Windows update to see if that finds a driver for it.  http://windows.microsoft.com/en-US/windows7/Update​-a-driver-for-hardware-that-isnt-working-properly
    If that updates properly and it's still not working, then it's more than likely a hardware issue.  Can you check the keyboard cable connections and make sure it is all secure and not crimped, broken, etc?
    Did you find a post awesome? A great response? Kudo them!
    Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

  • Large tabular cube w/ lots of measures -- keyboard stuck

    hi folks,
    I was wondering if anyone has seen this weird behavior:  on fairly large tabular cubes (SSAS 2012 SP2), with lots of calculations, the keyboard seems to be stuck, one cannot type or make any modifications to any measures, even after closing a project.
    The only workaround is to completely restart the machine.  Using Visual Studio 2010 Shell.
    Are there any possibly corruptions or calc limitations that one should be aware of?
    Notable that this never happens with any small cubes, but just with the largest cube that we have, that has probably tens of calcs.  
    any thoughts are much appreciated,
    Cos

    Hi Cos2008,
    According to your description, your keyboard get stuck when processing a huge tabular. However, it works properly when processing a small tabular. Right?
    In this scenario, I think the keyboard stuck you mentioned should be the entire machine stuck. Since this only happens for big tabular, I guess it should be caused by lack of hardware resource. Please reserve enough disk space for the .cub file. And
    set the memory configuration for SSAS engine and SQL instance:
    Server Properties (Memory Page)
    Memory Properties
    Also please refer to a white paper below to optimize your SSAS tabular.
    Performance Tuning of Tabular Models in SQL Server 2012 Analysis Services
    Best Regards,
    Simon Hou
    TechNet Community Support

  • Newish metal keyboard with a cap problem

    I have a problem with my keyboard.
    The cap key will only work sometimes - the light only comes on 50% of the time.
    I took it to my local apple shop, who after checking,told me it was the key needs to be hit in the centre!
    this doesnt seem right...?

    I've had my aluminum keyboard for 20 days...."caps key" began unresponsiveness intermittently about three days ago...went to Apple Chat....agent referred me to Apple article that suggested disconnecting and reconnecting keyboard USB...did that, and even reconnected in different USB port. That fixed the unresponsiveness....for about 4 minutes....."caps lock" key is now back to intermittent responsiveness...regardless of WHERE or how hard I tap "caps lock" key...even blew air into key...no help.

  • Help!!!!My iphone4 keyboard stucked when i open facebook app!!I cant even login!!

    Help!!!!My iphone keyboard stucked when i open facebook app!!I cant even login!!
    When i opened the facebook the keyboard come out but the cursor blink wont blink at all!
    Just stucked at there and i cant type anything for my hotmail and password.
    I have tried to reboot many times!
    and reinstalled the facebook many times as well,but have the same problem!!!
    Help pls!!!!

    sunny_1991 wrote:
    can anyone help me??
    Yes.  MagicJack support can.  Contact them.

  • IPhone 4 keyboard keys stuck in Caps, lower case works and all functionality.

    I just noticed today that my keyboard keys are stuck in the CAPS mode. When the shift key is off, it does input as lower case letters but the keyboard still shows the letters as upper case? Has anyone had this issue?
    My iPhone 4 iOS is up to date and this just happened all of a sudden. Its more annoying more than anything.
    Cheers.

    The letters on the keyboard always show as capitals.  No issue exists.

  • HELP! Keyboard -lowercase 'stuck'-no caps, no Shift key-Can't 'select all'

    HELP!
    I have tried all sorts of things, like:
    - removed syst prefs to desktop then restarted
    - un-done, re-done, re-booted
    - tried various options in International and Keyboard & Mouse
    - run disk utility, both from startup CD AND in target disk mode
    - ran Smasher
    - swapped out different keyboards and/or mice
    ...but these are my keyboard problem symptoms that persist:
    - numeric keypad not working
    - the shift key (for caps & shift characters) not working&
    - commands (i.e., "Select All") not working
    ...the keyboard does not work in ANY native Mac appl (e.g., Mail, Safari, TextEdit).
    The only time my keyboard will work correctly is when I am using Firefox or Word, etc., or when I create a new account as a test new user and I log-in. Keyboard works fine. So it must just be me as user.
    Also, oddly enough, keyboard prefs do not show up anywhere.
    Anyplace where I should see something, such as
    Library>preferences - there should be a file com.apple.keyboardtype.plist --- there is no file in any of the folders anywhere.
    All of a sudden the keyboard stopped working, no warning. But my mouse attached to it still works fine. I have no clue what to do to fix and my AppleCare has ran out.
    Other things I have noticed and tried:
    - running tech tool
    - repairing permissions
    - switching usb ports for the keyboard from the back of the display
    - removing the mouse from the back of the keyboard
    - unplugging everything but the keyboard and mouse
    ...any ideas???

    I did test with a spare keyboard, and it performed the same way: does not work for my user account, is fine for the test account I set up as an additional log-in.
    I also did this to try and solve my issue, but still nothin':
    - ran OnyX AND Cache Cleaner
    - ran & configured PrefEdit
    - ran AppleJack twice, once on AUTO for deep cleaning (in single-user mode, of course...)
    - ran MacJanitor
    - tried again to re-set my system prefs
    - reset PRAM again
    Sigh.
    All I want is to be able to type capital letters in Mail & Safari. Seems like I'm asking for too much!
    Sigh again.
    Thanks for any other advice or things you think I should try.

  • My MacBooks keyboard is stuck on caps lock and when I try to type in numbers it just shows as the symbols above the keys what to do?

    So what to do with this keyboard problem

    I sent the draft to myself several times. That did not seem to be working, but when I opened Mail this morning, it has been sent all of the times and the Mail screen is no longer frozen.

Maybe you are looking for

  • How to find out which sub query returns more than one row

    Hi all, Can any one give me clue ,how to find out which sub query returns more than one row in the following query . /* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */ SELECT a.*, ROWNUM AS rnm   FROM (SELECT DISTINCT '1' AS "Page View", ou.

  • The patch directory area must be a number. - 10.1.3 R12

    Hi, I am running an R12 vision instance. I need to apply a patch but whenever I try I get the error "The patch directory area must be a number.". VIS121 r121@ebs121-vm /tmp/stage/15929270 $ pwd /tmp/stage/15929270 VIS121 r121@ebs121-vm /tmp/stage/159

  • LR3 and camera raw and adobe application manager

    Hi all, I have LR3 and can't for the life of me find out in the documentation or on the website whether or not 1. LR3 uses camera raw 2. if it does, whether it gets installed automatically with LR3 3. where it might get installed 4. if necessary, how

  • Universal Adapter with Home Audio Systems

    I recently purchased the Universal Adapter for my Ipod in order to make it easier to connect and disconnect from my home audio system. Things work fine when the Audio cable is directly connected to the port in the Ipod, When I place the Ipod in the U

  • Ipod updater not updating

    I have a 20 gb ipod that's about a year old. I updated iTunes to the very newest version, then updated my iPod software, and my computer went through the motions of updating the software but as far as I know nothing has been updated on my iPod. A war