Keyboard stuck on middle of page

My keyboard is stuck on the middle of the page. How do i move it down again?

Press and hold the 'keyboard' key at the bottom right of the keyboard and after a second or so you should get a popup - slide your finger up to the Dock option and remove your finger and it should move back to the bottom of the screen.
You can turn off the ability to move (and split the keyboard into two halves) via Settings > General > Keyboards > Split Keyboard 'off'

Similar Messages

TS3274 My keyboard moved to middle of page and is split. How do I get it back to bottom of screen?

My keyboard moved to middle of page and is split. How do I get it back to bottom of page?

Press and hold the 'keyboard' key at the bottom right of the keyboard and then select Dock and Merge from the popup.
If the keyboard becomes split at the bottom of the screen, or if you want to join it when it's undocked, then you can join the two halves together by using a finger on each half to drag them together (similarly you can then use two fingers to re-split the keyboard). If you don't want the option of a split keyboard then you can turn it off via Settings > General > Keyboard > Split Keyboard 'off'

My keyboard appears in middle of page. How do I get it to revert to appearing at bottom of page?

My keyboard appears in middle of page. How do I get it to revert to appearing at bottom of page?

Tap and hold the little "Keyboard" icon in the bottom right corner and select "Dock"

Stuck on the loading page for 5 hours

My Macbook Pro is stuck on the loading page since 4 this afternoon and nothings has change since tthen, I try to close it, reopen it and nothing happen, I even try to plug it and nothings happens, I don't know what to do. If someone can help me that would be really nice.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Large tabular cube w/ lots of measures -- keyboard stuck

hi folks,
I was wondering if anyone has seen this weird behavior: on fairly large tabular cubes (SSAS 2012 SP2), with lots of calculations, the keyboard seems to be stuck, one cannot type or make any modifications to any measures, even after closing a project.
The only workaround is to completely restart the machine. Using Visual Studio 2010 Shell.
Are there any possibly corruptions or calc limitations that one should be aware of?
Notable that this never happens with any small cubes, but just with the largest cube that we have, that has probably tens of calcs.
any thoughts are much appreciated,
Cos

Hi Cos2008,
According to your description, your keyboard get stuck when processing a huge tabular. However, it works properly when processing a small tabular. Right?
In this scenario, I think the keyboard stuck you mentioned should be the entire machine stuck. Since this only happens for big tabular, I guess it should be caused by lack of hardware resource. Please reserve enough disk space for the .cub file. And
set the memory configuration for SSAS engine and SQL instance:
Server Properties (Memory Page)
Memory Properties
Also please refer to a white paper below to optimize your SSAS tabular.
Performance Tuning of Tabular Models in SQL Server 2012 Analysis Services
Best Regards,
Simon Hou
TechNet Community Support

VM created from Windows 10 TP template stuck at region select page

I need use System Center Virtual Machine Manager 2012 R2 to create VM with different locale settings.
Step:
Create VM with Windows 10 TP ISO.
Use local machine account 'A'.
Do some manual configuration.
Create VM template with this VM.
Template setting:
answer file with region settings (UI language, region, keyboard).
The OS type I select is Windows 8.1 or 64 bit 8.1 since there is no Windows 10.
I set the user ‘A’ and it’s password in admin password section.
Result:
When create VM from the template, it will stuck at select region page, and need manually do some settings then it could go to desktop.
When I use the same process to create Windows 8.1 VM template, the VM created from template will directly go to desktop.
Question:
It seems even I set locale related info in answer file, it’s doesn’t work for Windows 10 TP, how could I get the same result as Windows 8.1 template?

I don't know if you will get assistance with your issue, since it is not a supported deployment scenario.
I recommend you explore windows deployment as it relates to Windows 10 as there could easily be something that changed, or support for unattended specialization is just not turned on yet.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

IPad App Store app stuck on avg preview page won't go back to store, iPad App Store app stuck on avg preview page won't go back to store

My iPad App Store is stuck on avg preview page when I open app store

Open multitasking menu (double - press on home button), hold the AppStore icon for a second or so, and kill it with red X that will appear.

App Store stuck on a certain page

I have an iPhone 4S, and the app store is stuck on a certain page. When I go to the Featured section, all I can access is the Vampires section that's currently on the App Store. I can access Categories, Top 25, Search, and Updates fine, but I can not get back to the normal view for the Featured section. Any ideas on how I can fix this?

I found a way to resolve the issue:
1. Close the App Store from the multitasking bar.
2. Sign out of the iTunes account from the Store section in the Settings app.
3. Sign back in.
I tried just closing the App Store from the multitasking bar and it didn't work, so I think the key is to sign out of the account and then sign back in.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter

"Stuttered" printing in middle of page on psc 2175 all in one

I have been very happy with my 2175 for several years.
Then today I have experienced all kinds of problems.
A lot of noises, best described as Grinding. Also, the msg "Open door, clear carriage jam then press enter, -- following which I would get a msg to the effect of "Close cartridge Door, etc."
I have went through the procedures (several times) found on the website for trouble shooting the problems including doing the "cleaning procedures", (including cartridges and paper rollers/wheels doing a through search for any paper jams etc . (none found),doing all the power off- power on -- cycling suggestions.
Right now, I have been able to print without strange noises, But I have "stuttered" printing in the middle of page of any printed document -- a MS Word Letter, or a printed webpage for example . By "Stuttered" I mean a slight shift and reprint of characters.
The shift is much less than a standard character width on some documents consisting of only 2 or 3 characters. By middle of page, I mean the stuttering is confined to about 10 per cent of the page width - and right in the middle. The Left and right sides of the printed document appear fine.
Is it time for a new printer? I hope not.
Thanks,
This question was solved.
View Solution.

Gently clean the encoder strip as described here. Heed the warnings, the strip is fragile and can be damaged by rough handling.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Adobe story is not loading. Once the program has accepted my password, it get stuck on the "loading" page.

Help! I cannot access anything in adobe story. It is perpetually stuck on the loading page. I tried deleting my history and using a private browser page. Nothing is working.

Hi,
This may be an issue with the Flash Player or the Browser. First try updating to the latest version of flash player. You can install the latest one from here: Adobe Flash Player Install for all versions<https://get.adobe.com/flashplayer>. Then try to login again. ?Can you also try a different Browser to see if that is the issue?
Thanks!

I bought iphone 5 with there box and accesaries by third hand now i dont now the icloud id which first person put it now the iphone 5 stuck on icloud activation page. it is not teaft

i bought iphone 5 with there box and accessories by third hand now i dont now the icloud id which first person put it now the iphone 5 stuck on icloud activation page. it is not theft

are you stupend or clown,because how and the word he is gonna find the first person when i am pretty sure he doesnt even keep in touch with the person who he purch in the first place...Nabeel that is a lot of suck and i know whats that i am stuck in the same situation to...and i celled apple sopurt and they asked for a lot information and when i sent to them they just said to me that they not able to help me with that...i have spake with to many people in apple and the funny part is that everone has diffrent answer..

Set RDLC body to print in middle of page

Hi guys,
Please help me how to set RDLC body/content to print in middle of page instead of left page.
Thanks

Hi apangeran,
According to your description, when you preview the report using Report Viewer Control, you hope it is displayed in middle of the form. If that is the case, please refer to the following steps:
Click and select the report.
Click Format in the Toolbar.
In Format drop down list, select Center In Form, then select Horizontally.
The following screenshot is for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

B570 Keyboard Issue.... Keyboard stuck key issue....

Okay...
Earlier in February, My sister accidentally spilled sweet tea (That's right, Sweet Tea) on My BIBB Laptop... After letting it dry for a few days, I found out that the Main Keyboard needed to be replaced, so I bought a replacement Keyboard in June... However, when I plugged it in to my Laptop and tried to start it up, This error occurred:
Error: (I Can't remember the number) Keyboard Stuck Key.
After Unplugging the replacement keyboard (Which is in Great Condition...) I restarted the Computer with my USB Keyboard Connected and it started up fine.... After logging in, I tested my replacement keyboard by plugging it in, and found out that both Shift keys, Backspace keys, arrow keys, and the Number pad on the far right of the Keyboard weren't working....
A friend of mine told me that it was a Motherboard problem and the laptop would have to be replaced, But now I Don't know what To do now....
My question is:
Is there a way to fix this without replacing the whole Laptop? And if so, How?

I'm unable to find any information on Seacreate. Are you sure it's spelled correctly?
Try running a Windows update to see if that finds a driver for it. http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isnt-working-properly
If that updates properly and it's still not working, then it's more than likely a hardware issue. Can you check the keyboard cable connections and make sure it is all secure and not crimped, broken, etc?
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

Stuck on the restarting page. What do I do?

My Macbook air is trying to restart after installing the messagesbeta program. Now it's stuck on the restarting page. What do I do?

I would press the power on key and hold it for 6 or 7 seconds. That will shut down your machine. You can then power it up and see what happens.

Keyboard stuck on middle of page

Similar Messages

Maybe you are looking for