Keyboard/trackpad freeze on launch from 10.5.1 install dvd - please test

I, like legions of others on this forum and others, have had nothing but problems with the MacBook Pro keyboard/trackpad. All of these problems have disappeared since reinstalling 10.4.5 from the original dvds that came with my MacBook Pro.
A while ago, hopeful that 10.5 would solve the problems that 10.4.9 introduced, I bought the 10.5.1 dvd. After ugrading/reinstalling a number of times but always having the keyboard and trackpad problem, I tried the following experiment.
I wiped the hard disk clean (wrote "0" 's on the disk), then stuck the 10.5.1 dvd into the drive and booted. Then, before choosing the language, I waited one minute. The keyboard/trackpad completely froze. I was able to repeat this experiment a few times, and in each case, the same thing happened. I then re-installed 10.4.5, and all of my problems are gone.
I would like to know if others can test this out - even if you do not wipe your drive clean first. Just boot from the install disk, then - don't do anything - just wait a couple of minutes to see if the keyboard and trackpad freeze. I don't understand why it would be purely a hardware issue when
1. the hardware works perfectly with 10.4.5, and
2. many people are having the same problem, and we don't all have identical hardware.
the hardware I'd like to really see replaced are the apple care representatives. somehow, "apple care" has become an oxymoron, as far as I can see.
thanks.

MacBook Pro Apple Discussion:
http://discussions.apple.com/category.jspa?categoryID=190
Hopefully, someone there is more familiar with this very annoying and frustrating problem.

Similar Messages

  • Keyboard/Trackpad Freeze

    Hello everyone. This is not something I usually do, for the most part I can solve my own mac/pc related problems but I am just about at my wits end in regards to my 2.4 Late 2008 MBP (Gen 1 unibody). Recently I have been having random keyboard/trackpad freezes that definitely put a wrench into my computer use. Nothing seems to solve the problem except time to just let it sit. I will boot up my mac just to find my cursor in the upper left corner of the screen with no way of moving it, except for an external mouse. Same scenario with the keyboard, it flat out won't work. The problem comes and goes, and is impossible for me to reproduce. The thing that really burns my toast in all this is that it happens even if I have not moved the laptop, meaning I have set it on a desk, used it, turned it off or let it sleep and when I hop back on it ceases to function. This is the one aspect that makes me think that this is not a hardware issue, that it is software. I could see this happening if I moved it, perhaps something internal shifted and voila no input devices, but thats not how it works. It just randomly stops, physical movement or not. Now, I have looked into the problem, and it is one that seemed to happen after the jump to leopard, but we are pretty far into leopard's development cycle, and this kind of thing should not be happening. The other potential issue is the top-case/keyboard have a problem and need replacing, not something I would look forward to. If anyone on here can shed some insight, or have experienced the same problem with my generation of MBP, I would appreciate hearing about it.

    I've also, very recently, started having similar issues. Working along fine, then a complete system freeze. Nothing responds... no trackpad, no keyboard, nor will the system sleep when I close the computer. Only recourse is a hard re-start using the power button. The computer is rarely moved... sits on my desk most days. As I say, this has cropped up quite recently... just maybe the past few weeks... but is happening more frequently. My suspicion is also that it's software related, but I've added nothing new to my system in many months, so I don't know where to begin to look for the source of the trouble. Unlike amen001, this does not occur upon wake-up, but most other symptoms sound very familiar. Any ideas would be appreciated...

  • New version X1 freezes and disappears from screen. Re installed 3 times but not working

    New version X1 freezes and disappears from screen. Re installed 3 times but still not working

    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If not, download, unzip and run the attached registry script.

  • Installing Windows 7 on my bootcamp partition (mid-2009 mac book pro with mountain lion) My computer won't boot from the Windows 7 Install DVD.

    Hello,
    I have been trying to install Windows 7 on my macbook pro (mid 2009, MBP53). I have successfully created a bootcamp partition using the assistant. When the computer tries to boot from the windows 7 install dvd, the screen is just black. The dvd spins for a bit, then stops and the computer is just black (no blinking cursor).
    Any advice would be very appreciated.
    Thanks.

    What kind of an install DVD are you using for Windows?
    You can use any DVDs that are hardware specific. Only the full non-hardware soecific DVDs work on the Mac.
    Allan

  • Windows drivers from retail Snow Leopard install DVD older than the computer

    I'm trying to install Windows 7 64-bit on my mid-2010 Core i7 MBP (running 10.6.8) via Boot Camp. Since I am experiencing the "Windows support software is not available" bug when I try to download the drivers etc., it looks like I will have to install the drivers from an OS X install DVD, but I don't have access to the OEM disc that came with the computer. 
    I do have a retail Snow Leopard DVD that I got to upgrade my old Macbook right when Snow Leopard came out; will this disc (which predates the computer by about one year) have the drivers I need to get the hardware to work with Windows?  My concern is that since the disc is older than the computer, the disc may not have the drivers needed for the newer hardware. 
    Another issue/possible solution:  I had planned to upgrade to Lion as soon as this Boot Camp situation is straightened out; would there be a way to get around this issue by upgrading OS X first and then setting up Boot Camp?

    Any OS X DVD from 10.6 or later is fine, as we never tire of saying....
    Yes, sortof to upgrade OS X first, or leave as is and install Lion on an external drive (you can clone 10.6 only first with CCC to do that). Then clone back is one idea.

  • MacBook Pro Retina 15 late 2013 keyboard/Trackpad freezes

    I have had a problem for at least the last 6 months (possibly ever since I've had it since last November) with keyboard and trackpad freezing, usually when I awake it from sleep and/or plugging in an external display. I have to reboot by plugging in a USB mouse to fix it. Happens about two or three times a week on average.  I did reinstall it from scratch for Yosemite but still have the problem. I originally thought it was software but am now coming round to the view that I have a hardware problem.

    Hi,
    Have you tried an SMC reset? If that does not work maybe you should make an appointment with the Apple Store's Genius Bar.
    Regards.

  • Can't use mouse/keyboard/trackpad when waking iMac from sleep mode

    Basically as the title says. When I wake my iMac from sleep mode I am unable to use my keyboard/trackpad/mouse during the login window. Once the screen goes black by itself, after a minute or so I can then log in properly.
    Yes the keyboard/mouse/trackpad are all connected when it wakes from sleep as I can use any of them to wake it from sleep, I just can't move them or type with them in the login window.
    Processor  3.4 GHz Intel Core i7
    Memory  24 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GTX 680MX 2048 MB
    Software  OS X 10.8.5 (12F37)

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Our converted eCourses often freeze when launched from our new 3rd party hosted LMS...

    We have recently purchased a new externally hosted LMS system (Silkroad's GreenLight) and we have a 3rd party taking our older authorware courses (which are working) and updating/converting them using Adobe Captivate 5.5.  Once these are done and uploaded into the LMS system, users are finding sporadic freezing at launch of the converted courses.  In some cases we are using a Riverbed solution to compress content so that network performance is not an issue.  With the various components involved in this situation. we are having a hard time troubleshooting and narrowing down the problem as it is so inconsistent.  I noticed a blog http://helpx.adobe.com/captivate/kb/projects-published-captivate-5-lms.html suggesting a fix and we tried this with one user it worked with another it did not.  Our environment consist of XP (and some Win7), Adobe Flash Player 10+, and IE8 or 9.  Can anyone tell us what the proposed template fix described in the blog is actually doing?  Or if you've experienced this problem and have another fix we could try?  Any help is appreciated....Getting desperate.  Thanks!

    I believe the patches offered in that post were to address an issue that sometimes occurs with Resume Data bookmarking in certain LMSs. 
    If you are currently using Resume Data bookmarking, try disabling it by checking the box in LMS Customisation dialog to Never Send Resume Data.  If that resolves your issue, you at least know what is causing it.
    In cases where there are a large number of variables, the only way to diagnose the issue may be to remove as many variables as possible first. Then when you finally get to a stable version that does not misbehave, you then re-introduce the other components to find the one/s that re-introduce the issue.
    So, in your case, you may need to look at how your developers are 'converting' the authorware content in Captivate.  Make sure they recreate everything using Captivate components, and insert the images via the approved menus etc.  I'd also temporarily avoid using this Riverbed compression solution until you have established the cause of your issue.  It may be interferring with something.

  • Mac Pro 1.1 won't restart from boot HD or install DVD

    I have a MacPro 1.1 quad which won't finish the restart sequence from Boot HD or the Install DVD. I also can't get the DVD to boot to anything but hardware test (D key), which I ran and passed. After reading lots of posts about similar problems, I was pretty sure that it is my ATI Radeon 1900 card gone bad killing the restart right after the Grey apple screen. Then, while trying everything I could think of and finally getting the OPTION key restart to get the Startup Manager, I noticed my old boot camp partition (VISTA) that I had played around with, but never used much. After several failed attempts to get the install DVD to boot, I tried the boot camp partition and to my amazement, after a pause, windows started up. (That's actually how I'm writing this now.)
    I ran some tests on the graphics card from windows and it appears to be running fine, albeit a little hot.  So now the question: Can the graphics card still be the culprit when it performs ok on the Windows side?  
    Windows also says that the OSX boot partition of the same drive that boot camp is on can't be read (using MacDrive). But a Seagate HDD diag tool checked the drive and found no errors. I guess that could be part of my problem, but then why wouldn't it boot from the install DVD or in safe mode. I even tried putting the install DVD in my macbook and booting from there in Target mode, with no luck. Also, my install DVD is the original Leopard that came with the machine, but I had upgraded to 10.6.8 later. Would that cause the DVD not to work as a boot disc?  I just want to get to the Disk Utility so I can reinstall.
    Any knowledge or help would be so appreciated!
    Thanks

    I have a Mac Pro 1.1 and recently starting having issues. I was running out of drive space for my Vista drive I use Bootcamp. I decided to reinstall Vista on a bigger drive. I went through the normal procedure and had a **** of time installing Vista until I removed the main Lion SSD. Lion has Windows 7 drivers only. So I wanted to reinstall Snow Leopard on a blank drive and get those drivers.
    Mac Pro will not read or mount the SL installation DVD. It mounted once and could barely read anything but at a slow rate. I cleaned the disk, but after that despite holding down not the C and D keys at boot up and using Option at boot up the SL kept getting spitted out. Tonight I took it apart and cleaned it with compressed air and vacuum cleaner. I popped the DVD again and it spit it out. I put a DVD movie and it mounted fine. I'm ripping it as we speak. I've done this before just want to see why it won't read SL.
    Considered buying an external DVD write for $39 to see if I can get around this issue. Will post back on results. Otherwise this 2007 Mac Pro has been rock solid since then.

  • Unable to boot from hard drive or install dvd

    Out of the the blue my powerbook won't boot up. I've tried to reset the PRAM, I've tried to verbose thing but all it said was that it couldn't establish a connection to the windowserver. I've even tried to power on holding the option key but the hard drive and install dvd both have x's on them. What can I do to get this thing working again?

    Have you tried rebooting in safe mode? Failing that, have you tried rebooting from the install disc so you can run Disk Repair? For either of these tests, insert your system disc and follow the instructions here: http://support.apple.com/kb/TS1417
    Good luck!

  • 2011 27" iMac cannot boot from a slow leopard install DVD

    I just got a new iMac 27". It came with Lion preinstalled. I wanted to install Snow Leopard on the 2nd hard drive and it wont let me boot from the DVD or run the Snow Leopard install from the DVD when running under lion. When I try to boot from the DVD I get a kernel panic. I am also having problems with computer not waking from sleep. I think I should return this computer as defective. Anyone else have this kernel panic problem?

    As stated, you can't use SL on the Mac, so the kernel panics should subside if you're not trying to boot from SL. However, there are plenty of other posts re. freezing/not waking after sleep.
    So, if you do want to run SL, you could try to find one that still has SL installed (and you'd get the free upgrade to Lion) - there are quite a few refurbished units at the Apple Store. If you're within the 14 days and purchased it at an Apple store, you can return it and could order a refurb with SL (or find a new one at a reseller who bought up the left over stock). That's what I've usually done.

  • Keyboard and trackpad freeze and randomly become unresponsive

    I've got a MacBook Pro (15-inch Early 2011) running Mac OS X 10.8.2.
    Since a few weeks ago at random intervals my keyboard and trackpad become permanently unresponsive. I don't recall any particular cause or change that would have caused this to start happening.
    What happens is that the trackpad and keyboard will stop functioning completely. The computer, display etc. would continue to function properly:
    The clock keeps ticking.
    If music were playing it would continue etc.
    Internet connectivity (via an ethernet cable or WiFi) continues to work as well (a download will continue, and even resume if I disconnect and reconnect the ethernet cable).
    Presssing the power button will bring up the shutdown dialog as usual (but I can't use it, obviously, so a forced shutdown needs to be performed instead by holding down the power button longer).
    .. but the keyboard and trackpad are rendered inoperable, as if they were no longer connected.
    I've made no progress in finding out what could possibly be the cause of this. A few observations:
    It has never happened while not using the keyboard (e.g. watch a DVD with TV series for a few hours, and afterwards the keyboard would always be fine).
    It always happens while actively typing (e.g. while in the middle of replying to an e-mail).
    It is not a temporary problem, the keyboard and trackpad will not become responsive again after some time (the computer isn't particulary occupied with calculating something big, no beachball and no busy mechanical noises).
    It does not happen progessively. It works fine and snappy one second, and I'm touching a dead keyboard a split second later.
    I tried connecting a USB keyboard but that doesn't seem to work either (I'm mentioning this since some of the linked threads below close with that as a solution).
    Possibly related (although I haven't found anything in these threads):
    Keyboard causes trackpad to not function properly
    Keyboard and trackpack freeze
    Keyboard and Trackpad Unresponsive
    MacBook Pro Keyboard & TrackPad freeze! Totally Unresponsive!
    MacBook Pro inbuilt Keyboard and Trackpad freeze when not connected to bluetooth devices?
    I've crawled through some log files in /var/log (via the shell and through Console.app) and found a couple things that may be relevant, although they seem unrelated. Etiher way, I was surprised by what I found. All sorts of errors with regards to Bluetooth and USB stuff. I'm not aware of using either. I haven't used bluetooth in years and though I sometimes charge an iPod by USB, I haven't had any problems with that, and this keyboard/trackpad freeze has also happened on sessions where I started the laptop and never even touch the USB ports in the time leading up to the freeze.
    Sample log from when it happened. It last happened at 21:04:xx:
    Jan 14 20:18:39 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x141-192.168.178.13:0!
    Jan 14 20:23:49 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:26:14 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x142-192.168.178.13:0!
    Jan 14 20:29:11 KrinkleMac.local WindowServer[80]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    Jan 14 20:29:16 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:30:13 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:30:43 --- last message repeated 1 time ---
    Jan 14 20:33:24 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x143-192.168.178.13:0!
    Jan 14 20:41:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x144-192.168.178.13:0!
    Jan 14 20:42:43 KrinkleMac.local mtmd[46]: Set snapshot time: 2013-01-14 20:42:45 +0100 (current time: 2013-01-14 20:42:43 +0100)
    Jan 14 20:42:43 KrinkleMac kernel[0]: nspace-handler-set-snapshot-time: 1358192565
    Jan 14 20:43:14 --- last message repeated 10 times ---
    Jan 14 20:43:28 KrinkleMac.local AddressBookSourceSync[6580]: *** -[IADomainCache init]: IA domains cache is out of date.
    Jan 14 20:45:12 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:48:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x145-192.168.178.13:0!
    Jan 14 20:55:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x146-192.168.178.13:0!
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac.local blued[6615]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    Jan 14 21:01:14 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.427          AppleUSBHubPort[0xffffff803c3d2600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.722          IOUSBCompositeDriver[0xffffff803ae3be00](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:41 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:59 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.333          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.634          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:12 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:12 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.648          AppleUSBHubPort[0xffffff803a385000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.649          AppleUSBHubPort[0xffffff8038a3ba00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:13 KrinkleMac kernel[0]: E:[AppleBluetoothHCIControllerUSBTransport]WARNING !!!! [AppleBluetoothHCIControllerUSBTransport::DeviceRequestCompleteHandler] error 0xe00002ed (kIOReturnNotResponding)
    Jan 14 21:02:13 KrinkleMac kernel[0]: USBF:          145217.575          AppleUSBHubPort[0xffffff80398bf400]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.529          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.125          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.307          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.373          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          USBF:          145228.196          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.331          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.766          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:28 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145242.843          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145243.145          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:40 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:47 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x147-192.168.178.13:0!
    Jan 14 21:03:03 KrinkleMac kernel[0]: BRCM2070 Hub::terminate(kIOServiceSynchronous) timeout
    Jan 14 21:03:04 KrinkleMac kernel[0]: USBF:          145268.325          AppleUSBHubPort[0xffffff8039bc4c00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:03:20 KrinkleMac kernel[0]: USBF:          145285.139          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:21 KrinkleMac kernel[0]: USBF:          145285.572          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:22 KrinkleMac kernel[0]: USBF:          145286.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:23 KrinkleMac kernel[0]: USBF:          145288.132          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:24 KrinkleMac kernel[0]: USBF:          145288.882          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:25 KrinkleMac kernel[0]: USBF:          145289.385          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.455          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.456          AppleUSBHubPort[0xffffff8038a96200]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.492          AppleUSBHubPort[0xffffff803a9a6600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.483          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803b7c3700](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803c98b400](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145333.634          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145334. 67          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145334.916          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145335.347          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145340.675          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145341.108          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:18 KrinkleMac kernel[0]: USBF:          145343.300          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:19 KrinkleMac kernel[0]: USBF:          145343.803          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:20 KrinkleMac kernel[0]: USBF:          145344.644          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:23 KrinkleMac kernel[0]: USBF:          145348. 42          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145348.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145349.299          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:04:42 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:04:42 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:04:44 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:05:20 localhost bootlog[0]: BOOT_TIME 1358193920 0
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    Jan 14 21:05:41 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
    Jan 14 21:05:41 localhost kernel[0]: PMAP: PCID enabled
    Jan 14 21:05:41 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64

    I've recorded the logs several times now and although a lot is variable (likely unrelated errors and crap). The following 5 lines consistently occur right before the freeze:
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:06:10.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:06:10.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:06:24.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:07:22.000 PM bootlog[0]: BOOT_TIME 1358546842 0
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:29:27.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:29:27.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:30:02.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:31:39.000 PM bootlog[0]: BOOT_TIME 1358548299 0

  • Intermittent keyboard and trackpad freezes in 10.5.2 (not again!)

    Hi all,
    I'm having a major issue with my MacBook Pro built-in keyboard and trackpad. This issue is incredibly reminiscent of the previous widespread keyboard/trackpad freeze problems, documented in a number of threads, such as here:
    http://discussions.apple.com/thread.jspa?messageID=5860606
    http://discussions.apple.com/thread.jspa?threadID=1196400
    http://discussions.apple.com/message.jspa?messageID=6103438
    http://discussions.apple.com/thread.jspa?threadID=1190210&tstart=0
    What's special about this case is that these issues began very recently, well after I installed Mac OS X 10.5.2, which I recall is supposed to provide a fix for exactly this issue. I've never had a problem with this MacBook Pro notebook before, so this is incredibly unnerving.
    The issue is frustratingly intermittent, but frequent. Sometimes the entire keyboard and trackpad locks up (freezes) and won't acknowledge any input whatsoever. Other times the keyboard and/or trackpad appear to get "choppy", sometimes the keyboard will miss a key causing a typo while typing or the trackpad will suddenly stop moving the cursor. Other times the keyboard will repeat keys by accident, causing maaaaajor typos (kind of like that).
    What's really weird is that I'm seeing the floating "eject" bezel appear (the symbol that you see when you hit the keyboard's eject button) very frequently, when my fingers are nowhere near that key and I'm sure it's not pressed. This even happens sometimes when I'm not using the keyboard at all, just the trackpad (most often while scrolling with the two fingers gesture).
    I've troubleshot this in a number ways. Here is one such troubleshooting session's activity log that I kept while performing the troubleshooting:
    ---- CLIP ----
    MacBook Pro Keyboard Freeze problems troubleshooting log
    * Symptoms are a frozen keyboard and trackpad, that is, no input being recognized by the keyboard or trackpad. Not even the light of the caps lock key lights up when the issue is present.
    * Restarted computer. Issue recurred moments after logging back in and beginning to type.
    * Restarting, zapping PRAM. Issue is gone for a little while but has recurred.
    * Found a single line at the time issue began again in the "All Messages" log shown by Console.app that reads as follows:
    4/24/08 Apr 24, 8:58:15 PM kernel USBF: 551. 7 IOUSBCompositeDriver[0x65b7280](IOUSBDevice) GetFullConfigDescriptor(0) returned NULL
    * Restarting computer again, trying to boot in verbose mode. Can't!! Keyboard wasn't recognized even at this stage! Can't log in either, keyboard unresponsive at login screen.
    * Restarting again (via external USB mouse). Login window comes up and keyboard input is acknowledged. Very strange.
    * Keyboard input lost once again after using the keyboard for a short period of time.
    * Restarting, zapping PRAM again, and Logging in as Leopard's "Guest" user to try and isolate issue...no good, just seconds after logging in, the keyboard and trackpad freeze again.
    * Restarting once again, this time everything works. Noticed that the keyboard backlight is not lighting up in low-light situations. Trying to change the light level with the keyboard keys always results in the keyboard backlight bezel showing up with a prohibitory symbol. This is looking more and more like a keyboard driver issue.
    * Repairing disk permissions, no problems reported. Verifying disk itself, no issues reported. Issue persists.
    Observations and Lessons learned:
    * This issue began slowly, with freezes sometimes happening hours apart from one another, however it accelerated quickly. Now sometimes only mere seconds after logging in, my keyboard is frozen and sometimes the keyboard is even frozen at boot time, so that start up modifiers are not even recognized!
    * Zapping PRAM helps, sometimes, but only for a short period of time.
    * No other traditional Mac fix seems to affect the issue (repair permissions, etc.)
    * The issue occurs regardless of whether or not any peripheral devices are attached to the system.
    Perhaps unrelated, but interesting (and new!) to note:
    * The Bluetooth menu item reports that "Bluetooth: Not available", the Bluetooth System Preference pane is not visible, and System Profiler reports that "No information found" about Bluetooth.
    ---- END CLIP ----
    I've yet to try resetting the SMC, or doing a clean install, but from the copious amounts of users who reported similar errors in the threads I linked at the start of this post, those options only sound marginally hopeful.
    Some of these issues (like the weird eject key suddenly firing on its own) have been present for a little under a week, but the freezing is brand new. The only system-wide change I've made in the last week was installed the MacBook Pro EFI Firmware Update 1.5.1, which was successful (verified in System Profiler; my boot ROM version reads as MBP31.0070.B07).
    So mostly I want to know if anyone else using OS X 10.5.2 is also experiencing this problem. Also, though I'm grateful I could actually use my built-in keyboard to type this message (even with occasional missed keyboard presses, GRRR!!!) my only reliable workaround is an external keyboard. Which is a decidedly annoying thing indeed.
    Help?!?
    Thanks!
    -Meitar Moscovitz
    P.S. AUGH! Just as I was typing that last sentence the keyboard froze again! So I'm actually finishing typing this post via a VNC session. So, so, so so frustrating!

    I wanted to post once again with additional information just in case someone else is also having similar problems. Unfortunately, I'm almost certain that this is probably bad firmware or bad hardware, not a software issue at this stage. Here's why.
    KERNEL PANIC! Take a look at the backtrace and you can clearly see that the Trackpad is to blame. Also, in the system configuration report, not the boot ROM version string, which indicates that I have indeed updated to the latest firmware provided by the recent release of MacBook Pro EFI Firmware Update 1.5.1.
    Here's the Kernel Panic log and system configuration I reported to Apple:
    PROBLEM DETAILS:
    Fri Apr 25 14:46:15 2008
    panic(cpu 1 caller 0x001A8C8A): Kernel trap at 0x34ba3a1a, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x013e5000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x04f1f800, ECX: 0x00000040, EDX: 0x0bbccd80
    CR2: 0x00000000, EBP: 0x3492bbe8, ESI: 0x3492bca0, EDI: 0x3492bca0
    EFL: 0x00010202, EIP: 0x34ba3a1a, CS: 0x00000008, DS: 0x0bbc0010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x3492b9f8 : 0x12b0f7 (0x4581f4 0x3492ba2c 0x133230 0x0)
    0x3492ba48 : 0x1a8c8a (0x461720 0x34ba3a1a 0xe 0x460ed0)
    0x3492bb28 : 0x19ece5 (0x3492bb40 0x534500 0x3492bbe8 0x34ba3a1a)
    0x3492bb38 : 0x34ba3a1a (0xe 0xba90048 0x10 0x10)
    0x3492bbe8 : 0x34bae0c2 (0x0 0xbbccd80 0x0 0x40)
    0x3492bc08 : 0x34bac46b (0x4f1f800 0x3492bca0 0x40 0x0)
    0x3492bc68 : 0x34baed65 (0x4f1f800 0x3492bca0 0x40 0x40)
    0x3492bd38 : 0x34baefc3 (0x4f1f800 0x0 0x0 0x59c159)
    0x3492bd68 : 0x5955b3 (0x4f1f800 0x0 0x0 0x0)
    0x3492bdf8 : 0x823383 (0x4340000 0x43d2d00 0x0 0x0)
    0x3492be68 : 0x8248a8 (0x4340000 0x43c9000 0x0 0x0)
    0x3492bed8 : 0x8248e0 (0x4340000 0x0 0x0 0x135f38)
    0x3492bef8 : 0x8277cf (0x4340000 0x2 0x5396a0 0x42636ac)
    0x3492bf18 : 0x41f963 (0x4340000 0x437b180 0x1 0x19d4b1)
    0x3492bf68 : 0x41eac0 (0x437b180 0x4257e40 0x3492bf98 0x1369d8)
    0x3492bf98 : 0x41e7a2 (0x433c500 0x48c1440 0x4a81a00 0x4257e40)
    Backtrace continues...
    *Kernel loadable modules in backtrace (with dependencies):*
    com.apple.driver.AppleUSBTrackpad(1.6.3f3)@0x34b9d000->0x34bb5fff
    *dependency: com.apple.iokit.IOUSBFamily(3.0.8)@0x590000*
    dependency: com.apple.iokit.IOHIDFamily(1.5.2)@0x67b000
    com.apple.driver.AppleUSBUHCI(3.0.7)@0x81d000->0x82afff
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5bf000
    dependency: com.apple.iokit.IOUSBFamily(3.0.8)@0x590000
    com.apple.iokit.IOUSBFamily(3.0.8)@0x590000->0x5b7fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9C7010
    Kernel version:
    Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    SYSTEM CONFIGURATION:
    *Model: MacBookPro3,1, BootROM MBP31.0070.B07*, 2 processors, Intel Core 2 Duo, 2.2 GHz, 2 GB
    Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 128 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.4
    Bluetooth: Version 2.1.0f14, 2 service, 1 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: FUJITSU MHY2120BH, 111.79 GB
    Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
    USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
    USB Device: Optical USB Mouse, Logitech, low_speed, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
    Very strangely, Bluetooth functionality seems to have magically returned (it disappeared when this issue began occuring).
    There are also further log messages possibly associated with these errors:
    4/25/08 Apr 25, 2:46:07 PM kernel USBF: 2.411 CSRHIDTransitionDriver[0x445bf80](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
    4/25/08 Apr 25, 2:46:15 PM DumpPanic[42] Panic data written to /Library/Logs/PanicReporter/2008-04-25-144616.panic
    4/25/08 Apr 25, 2:46:28 PM kernel E:[AppleUSBBluetoothHCIController][StartInterruptPipeRead] there is alredy a pending read, skipping.
    4/25/08 Apr 25, 2:46:28 PM kernel [InterruptReadHandler] Received kIODeviceNotResponding error - retrying: 1.
    4/25/08 Apr 25, 2:48:19 PM kernel USBF: 145.306 [0x442ea00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5d000000)
    Running an *extended test with AHT, got error: 4SNS/1/40000000: TD0D-85.500*
    Also, *while running AHT, the keyboard freeze happened again*, and neither the trackpad nor even the light on the caps lock key was responsive, so now I am almost certain that this is not a software issue.
    Sigh. I really don't want to take this to a third-party repair center, but as I'm in Sydney I can't wait for the Apple store to open up—whenever that's supposed to be.
    -Meitar

  • Can't boot from Windows XP Install DVD

    A couple months ago I wanted to use Boot Camp for the first time to install Windows XP Professional (SP3) on my iMac8,1, but I ran into a lot of trouble. I got a lot of support from you guys but I ended up scratching the mission because of a problem that nobody could help me with at the time (I sought support on IRC, too). I will adduce the links to the threads regarding the issues that were more or less solved at the end of this post.
    Today I decided to make a thread here and hope that this time somebody knows what to do, how to solve the weird problem that I'm having when I try to boot from the Windows XP Install DVD right after I partition the hard drive with Boot Camp Assistant.
    So when the iMac restarts, after I have inserted the disc, and tries to boot from it, I randomly get one of the following three possibilities on the screen (and nothing happens after it):
    http://img689.imageshack.us/img689/6725/p3201160.jpg
    http://img180.imageshack.us/img180/105/p3201161.jpg
    http://img684.imageshack.us/img684/2076/img0472zt.jpg
    I burned the disc myself, so it's not the original disc from Microsoft. I did try re-burning the .iso file multiple times (both with Disk Utility and with the application called Burn), to no avail. The disc works fine with VirtualBox!
    Please let me know if you have a possible solution and I will thank you for it greatly!
    Related threads:
    Weird Behavior After Multiple Failed Partitioning Attempts
    I Can't Partition My Hard Drive (Files Can't Be Moved)
    How should I go about this? (resetting my system with minimal losses?)

    Only thing that comes to mind is did you try multiple types of burn media? Also, did you try burning at the slowest burn speed?
    ~Lyssa

  • HT2604 I can't instal software from applications instal DVD! please help me!

    I can't instal software from applications instal DVD! please help me!

    hi, i face the same problem and appreciate your help. I delted iphone and the library. I reinstalled iphoto from the original application install DVD and when trying to open it I get a failure message. My mac version is 10.8.5 and the install disc is 10.6.6. I got a big text from the error message what would you need to help me?
    Thanks so much

Maybe you are looking for

  • ITunes plus label on the album, but then disappears....

    I recently went to purchase "leaves in the river" by Sea Wolf, and under the album logo it said it was an iTunes plus cd. When I click on the album and get the details of the album, it no longer says that it is an iTunes plus album, nor is there the

  • How to use special characters in rtf template?

    Hi, We are using .rtf template to print an invoice in pdf format. Now the requirement to put special character under footer section as below. "New York • London • Houston • Berlin • Vienna • Sydney • São Paulo • Singapore " I use same in rtf template

  • New Cisco ISE 1.3 software on IBM x3250 series ?

    Hi All, i need clarifications concerning those three questions : -              As the Cisco ISE 1.3 is released few days ago, is it possible to install it on another hardware vendor like IBM x3250 series? -              If yes how we will manage wit

  • What does apple do with our Adresses?

    What does apple do with my address if I ever give it to them to create an account at iTunes store? Do they ever send me mail? Or even junk-mail? Thanks for the help.

  • Workflow for Fuji S5 (or S3)

    So after more than a year of researching and waiting to have the time, I was all set to purchase a Nikon D200 when I became convinced to buy a Fuji S5 instead (and I will once I can find one in stock). For the Nikon, I had planned the following workf