Keyboard/Trackpad not working in BootCamp

I installed Windows XP SP2 on a BootCamp partition, but the keyboard and trackpad on the laptop doesn't work. Only external, USB keyboard/mice work. Any ideas how to get the keyboard and trackpad to work?

After struggling with this for way too many hours last night, here's a trick that finally worked for me. I found it in the support forums of the excellent WinClone utility (which I used to copy my BootCamp partition from my MacPro to my MacBook Pro).
Basically, following these steps to change the Trackpad ALSO fixed the keyboard. I then had to re-install the BootCamp 2.1 update, which gave the function keys back.
Good Luck!
- Paul
=================
-In device manager notice that in the mouse and pointing devices section there is only the usb mouse that you have hooked up.
-Under Human Interface Devices you have an Apple Trackpad listed change this driver to USB Human Interface Device
-Properties
-Driver (tab)
-Update Driver
-"No, not this time" (radio button)
-Next
-"Install from a list or specific location (Advanced)" (radio button)
-Next
-Dont search, I will choose a driver to install" (radio button)
-Next
-USB Human Interface Device
-Next
-You'll now notice a "Trackpad Enabler" under mouse and keyboard section
-Change the HID device BACK to trackpad driver using the same steps as above- (you will get warnings that the driver isn't "digitally signed" continue anyway and it should then start working.

Similar Messages

  • Keyboard trackpad not working

    All of a sudden my keyboard and trackpad don't work on my Macbook. USB keyboards and mice work fine. I took off the keyboard and tried it on another Macbook and it worked fine. Don't know if any recent updates or firmware changes have been done. Any ideas of how to fix or is this a motherboard issue?

    Hi today we were having a yard sale. A family member needed to use a computer and used mine. When i got it back from they left in a hurry.
    Well I opened it clicked a few things with my "wireless mightymouse" and went to type keyboard did not work so i tried the track pad. So i found this post looking on the web. looked other placess. thought i would shut it down as soon as it went off it immediately turned back on. so i tried again. no luck so i took out the batery unpluged it. Then it would not turn on. Apple is sending a box by monday. I told them i think it is a logicboard="motherboard" problem.
    But till then im going to a computer store to obtian my data off my MacBook

  • Keyboard & Trackpad not working but USB are...

    Hi - 2007 white Macbook, 10.6.8...
    Today the machine appeared to keep freezing completely... after numerous checks (including booting in 10.5), it transpired it was the keyboard and trackpad that weren't responding, not the OS. I know this because I plugged in a USB keyboard/mouse to check and they work fine.
    That said, the onboard keyboard & trackpad do work upon boot up for anything from 1 to 10 minutes. Then they just stop responding and I have to resort back to USB again. I can see others who've had similar problems but I can't find a solution.
    It doesn't appear to be a fatel hardware error because they will always work on boot up for a limited time. All updates are applied and disc permissions repaired.
    Anyone know how to solve this? Appreciate the help - stars all round, thanks.

    It doesn't sound like a fatal hardware issue but I think your Top Case Assembly or the connection cable are going bad. The top case is basically the plate containing your keyboard, trackpad, and power button.
    The fact that it works via USB basically confirms that, but there is the outside shot that the connector on the Logic Board could be the problem....
    Before you take it to an Apple Store, try to boot it up from your software discs that came with your Mac (disc #1, you can do this by restarting your Mac with the disc in and holding down the C key after the startup chime) and see if the problem occurs. If it does, I would have an Apple Service Provider or an Apple Store replace your Top Case for you.If it's okay on the discs, run your Disk Utility on the software disc and reinstall the OS.
    I hope this helps!

  • Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

    My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

    @sanjampet
    As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you,  the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
    Next time when it will work, I will update its firmware.
    My macbook was bought in dec2011 so no warranty now.

  • Wireless keyboard and trackpad not working.

    iMac keyboard and trackpad not working after a couple days of not using. Hit power button on them and the light will blink, but will not function. Any help?

    Have you tried a fresh set of Alkaline batteries?
    Have you tried cleaning the battery contacts in them?

  • My Macbook Pro keyboard AND USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?

    My Macbook Pro keyboard and USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?
    This is quite frustrating, since it randomly occured as I was browsing the web.  It seemed to happen out of nowhere.  I cannot login to my user account because I cannot type my password. 
    Any help will be appreciated.
    -Matt

    If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
    Next, download the 10.5.6 Combo update from here:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
    Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

  • All of the sudden my keyboard is not working.  the trackpad is working, but i can't enter any letters/numbers?

    all of the sudden my keyboard is not working.  the trackpad is working, but i can't enter any letters/numbers?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Likey a bad digitizer
    Apple Retail Store - Genius Bar          

  • Keyboard does not work after using Support Drivers

    I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
    When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
    I did a system restore to get it back to a usable state for the time being.
    Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?

    Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers

  • Keyboard is not working on Macbook 1.83GHz with Windows XP Pro

    Hi
    There is a problem in Macbook 1.83 GHZ (Macbook 13-Inch Mid 2007 Combo) the keyboard is not working some times when I boot from Windows XP install Disk, after installation of Windows XP Operating System.
    Either I install first Mac OS x 10.4.9 then Install Windows XP Pro through bootcamp 1.2 Completion of both Operiting System I boot through Windows XP bootable CD OR I install Windows XP with out Mac OSX, in both conditions when i boot my computer through Windows XP bootable CD some times my built in keyboard (or external USB keyboard) does not work.
    Not only one Macbook is effected there are many.
    I request you to please advise to resolve this hot issue.

    Has any one had problem like this, plz share to resolve this issue.

  • My keyboard does not work after cleaning :-(

    Hello, I have a MacBook Pro (bought in december 2009) an now the keyboard does not work after I cleaned it. This was on thursday and today it still does not work. Any ideas?

    Chances are that you've shorted the terminals on the keyboard, and will need to be replaced… When the keyboard on unibody MacBook Pro's is replaced the whole 'top case' will be done, trackpad etc… Now generally it is highly unlikely that the Liquid submersion indicators will have been activated unless the cloth was saturated with water. Also unless you purchased the AppleCare protection plan your MacBook will be out of warranty and will require an out of warranty repair.
    From knowledge out of warranty repair for a top case assembly it's £163 and a level 2 hardware repair is £28

  • Apple USB keyboard does not work with one internal usb port

    Hi everyone,
    hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
    Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
    After searching the web on such problem, I tries a few things such as:
    I tried the keyboard on another computer (windows): works fine
    I tried usb stick and external DVD reading on the left internal usb ports: works fine
    I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
    I tried the SMC and PRAM reset : nothing
    Any idea ??
    Thanks
    Guillaume

    I'm facing the same problem, found any solutions ?

  • External USB keyboard does not work with T60 after BIOS upgrade

    External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
    It does the same with or without the docking station.
    Anyone else bumped into this problem yet? 
    Has someone found any fixes for this?
    t

    Hi and welcome the forum!
    Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
    v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

    Hello need help on weird happenings to my keyboard..
    Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
    All keys on keyboard is working and touchpad is also working.
    But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
    what do you think is the problem??
    Hardware Issue? or Driver Issue?
    please help thank you..

    Hello @MysticDragon ,
    Welcome to the HP Forums!
    I understand some of the keys on your keyboard are not working after installing Windows 7.
    I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
    Try this:
    1. Click Start.
    2. Click Control Panel.
    3. Click Clock, Language, and Region.
    4. Click Region and Language.
    5. Click the Keyboards and Languages tab.
    6. Click Change keyboards...
    7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
    8. Click on any other keyboards in the Installed services list.
    9. Click Remove.
    10. Repeat for all other non-English (United States) keyboards.
    You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
    Let me know if this works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Keyboard is not working in firefox

    my keyboard is not working in it
    it happened when i typed one word many times in it
    a dilogue box appears that i typed many times words and there are two options on it
    yes or no
    i pressed no
    after that i can't use keyboard

    You might have activated a Windows accessibility feature that requires to hold down a key for a longer time to make it work.
    *http://www.microsoft.com/enable/products/windows7/default.aspx
    *http://windows.microsoft.com/en-us/windows/make-keyboard-easier-to-use#1TC=windows-7
    Some have reported that pressing F9 and the Windows key simultaneously one or more times has worked to fix issues with the keyboard not working.

  • After Recovery with CD Satellite C660-1FE keyboard does NOT work

    Hello,
    A month ago I purchased a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and replaced the broken HD. As I did not make an recovery image of my HD, I had to order the Product recovery discs off the Toshiba website (3 discs, of which disc 1 and 3 were the only one's required for installation).
    Now, I have the problem that my laptop keyboard does not work. I am currently using a USB keyboard and mouse to replace my keyboard and touchpad of the laptop.
    The laptop keyboard works fine in BIOS. Therefore, I hope it's just a driver problem.
    I have:
    tried finding and installing lots of drivers on from the toshiba website, no result.
    tried changing settings in the bios (usb enable/disable).
    tried to fix the problem by re-installing the entire computer again several times.
    The keyboard seems to work until windows loads. When the system is starting up I can press caps lock and num lock and the green lights come on. This all stops working once the windows startup symbol appears.
    Perhaps a second problem in the device manager: under the display-adapter, 2 subcategories have exclamation marks: it says Mobile Intel(R) 4 series express chipset family twice! I can't seems to fix these with any drivers I can find either. When I check the settings I have this message (google translate since it was in dutch):
    +The digital signature for the drivers for this device is required, can not be verified. Possible after a recent hardware or software change a file that is installed incorrectly signed or damaged, or is malicious software installed from an unknown source. (Code 52)+
    +You need to restart the computer to this device changes to take effect.+ (obviously I tried that too)
    Can someone please give me some help? I am at the end of my wits.
    Sincerely,
    Daniel

    Hi MisterX,
    thank you for your response. I have tried these things and there is no such thing as PS2/keyboard in device manager. It's as if the Hardware is not even recognizable in windows. I am starting to doubt whether I got the right Backup CD.
    I wrote the following e-mail to [email protected]:
    +Dear Toshiba,+
    +after receiving the recovery CD's for my toshiba c660-1FE, it turns out that the drivers for the keyboard and touchpad are not installed. I have tried many things to get around this but it seems to me that I have received the wrong product recovery CD's. The chipset drivers are not the right ones, the overall layout of this version of windows 7 is different from before and when looking for answers in the toshiba forum I have concluded that the recovery CD's could be the wrong ones.+
    +My laptop: Satellite C660-1FE+
    +serial: 5B378048K+
    +Part-nr: PSC0LE 02M0TU26DU+
    +Recovery CD's I received are CD's 1-3 with serial R14254DU+
    +Would you be so kind to check whether these CD's should be 100% compatible with my laptop?+
    +This would be greatly appreciated,+
    +Daniel+
    MisterX, do you know any other emails I can forward this too? Or anyone who could perhaps tell me if I got the right CD's? They are taking their time to respong to this...
    Kind regards,
    Daniel

Maybe you are looking for

  • DIFFERENT type of mms problem (receivers can't view)

    Hey all, I have a different mms problem after updating my 3GS to ios 4... Seems I can send mms and videos just fine, however the end receiver just sees a still image and hears the audio. I've done a lot of tests with this, and my wife's 3GS does the

  • Upgraded to CS5 Illustrator form CS3 Illustrator. Colors are not printing correctly in CS5

                                                I have just recently purchased CS5 Premium Suite.  I am working with Illustrator.  When I print my CS3  Illustrator files in CS5 the colors are not printing correctly.  Is there a way to fix this problem

  • Sony DCR-HC42 and Final Cut Pro??

    Can anyone verify that the Sony DCR HC42 digital video camera works with an G4 12" iBook and Final Cut Pro 5?? I want to buy this camera but want to make sure I can edit the footage with FCP. Any help would be appreciated.

  • How to Maintain table "OIB_USERPARAM"

    Dear All, Can anyone help me to understand, how to maintain the table "OIB_USERPARAM", is there a T Code or SPRO link? There are some entries in these tables which needs correction. Please help. Regards, Anubhav

  • How do i Auto refresh a datagridview

    i have a small app that tells uses how many customers are waiting for them and what time they arrived but i cant think how i could get the view to refresh itself after say 15 seconds, cheers steve j