Keyboard - when I press the z key the y character appears on the screen and vica versa.
I upgraded the software on by Q10 yesterday and now have a problem with the z and y characters. Any ideas how to fix this?
Solved!
Go to Solution.
Isn't it a keyboard layout setting?
Like a shift between AZERTY and QWERTY for example. Check in the language input section of the preferences and see if you can find a solution there.
Kepp us posted
Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)
Similar Messages
-
I have the iPhone 4S and my daughter has the iPad 2. We share my Apple ID. Is there any way to stop her text messages from appearing on my phone, and vice versa? She doesn't need to be reading my texts!
no, there currently is no way of doing this. You can only create a second Apple ID.
-
iTunes has this song by Luiz Gonzaga Jr (Palavras) that plays as the song that follows (A Felicidade Bate A Sua Porta) and vice versa, and i thought Palavras would sound like the other: so isn't this a mis-labled song situation?
-
HT5622 how do I get the tunes I purchased on my iphone onto my laptop and vice versa?
I really want to use an itunes download as my ring tone on my iphone 4, how do I do that?
This is best done on your Mac in iTunes - create a copy of the song, trim it to the best length for a ringtone, change the filename extension to m4r and sync it to your phone.
See this document:
http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html
and this:
http://tonerack.com/iphone-ringtone-format-explained/ -
Hi I'm new to Mac. I have a macbook air and for some reason the top keys, ec, f1 etc etc are not functioning and emitt the non function noise when pressed. Also the volume keys don't adjust the volume. Have I done something to disable them?
I don't have the same version of OS X here but try System Preferences>Keyboard. Is there an option similar to "Use the F1, etc, keys as standard function keys"?
If so, and it has a checkmark, uncheck it & see if that does the trick.
~Lyssa -
why when I press the command button and number two, yahoo comes up instead of the ‘at’ key? how can I fix the command shortcuts? help me please.
try pressing the shift and 2 key to get the @ symbol.
if that doesn't work for you - go to system preferences - keyboard and change it there.
good luck -
When recording my midi keyboard when I press the pedal down it records a low E, how to I get rid of this?
It was gift back in September. You can follow the instructions in the link below to remove them:
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support -
Does someone can fix my keyboard when I press the r- y ,f-h,v-n, they apears together. like this ry ry fh fh cn nv and 4 the number 4 and 6 too.HELPME
Bring it to an Apple store or AASP.
-
My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future. -
I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?
Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
I have the flashing question mark, but when I press option/alt, I'm only prompted to start the internet recovery. Afterwards the Mac OS X Utilities pops up, but there's no start up disc when I try to reinstall Mac OS x or anything.
Hello, sullivja.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
A flashing question mark appears when you start your Mac
http://support.apple.com/kb/ts1440
Cheers,
Jason H. -
I need help registering Lightroom. Purchased from Amazon. The license key Amazon provided did not match the fields when activating the software. Help!
Maybe Amazon provided a redemption code not a license key:
https://redeem.licenses.adobe.com/getserial -
when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours
Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you! -
Buzzing sound when I press my w key on my new laptop
I don't know what it is but when I press my w key on my new laptop it makes a buzzing sound. It does this when I am running something that needs the fan going a little faster so I think it might be grinding on the fan or something which is under where my w key is so I am a little worried. Can someone help me out please?
Hi Vinny180, welcome to the HP Forums. It does sounds like a physical response to pressure when depressing the 'W' key. If that is the case, you would probably be best to contact support for repair options.
HP technical support: 800-474-6836. If you live outside the US/Canada Region please click <HERE> link below to get the support number for your region.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
REP-52005: The specified key rep_drill does not exist in the key map file.
Hi
I am using Forms and reports version 11.1.1.4.0
Weblogic 10.3
I wanted to create a drilldown report
I have modified the cgicmd.dat file in the below location
C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
by adding the below line to the end
rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
restarted the reports server
In CUSTOMERS.RDF I have placed a link on the customer field using the below code
SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
There are so many parameters passing to the report JOBS.RDF
When I run the report and click on the link it gives me an error
"REP-52005: The specified key rep_drill does not exist in the key map file."
When I replace the rep_drill in the link with
userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
the report work perfect
Can somebody help me pleaseI said
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
It looks like you did the following:
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
Try removing the test.rdf.
Anton
p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20
Maybe you are looking for
-
Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"
I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player,
-
Where can I find the USER LIBRARY in LION OSX? best wishes Barry.
-
Printing in character mode with MSWIN1250 cp
Hi, A co-worker of mine has a very annoying problem with a report. The mission is creating a report which could be run on a matrix printer (e.g. epson 1170 , DFX-5000 or similar like these) and it must work well with MSWIN1250 codepage. The main reas
-
Best practice for copying help...
I am creating a webhelp project to be accessed from an internal homegrown intranet app(by clicking on a help button within the app it fires up the help screens in a new window).... I published the help out to a network share however now in testing op
-
Hello, I am working on a script to automate xperf traces and am trying to determine which providers I need turned on. To do this I am using the Windows Performance Recorder and am clicking the checkboxes are want information from and reviewing that i