Keyboard

iMac flat panel, G4 800 mhz ... how to clean my keyboard inside?
I've used compressed air in a can. but through the clear Lucite case, I see lots and lots of cat hair and aglomerated dust. This can't be good. How do I dismantle the keyboard case and blow all this junk out of there?
Thank you.

Sally .... get a Dachshund!
Seriously though, you might be looking for trouble. Th only two fastners I can see on the underside of the leading edge (keyboard wire) are very, very, tiny Torx head screws that require a very special type of screwdriver head.
They would possibly release the bottom plastic, which has a slight gap on the spacebar edge.
Whether that would provide further access to the key area is questionable without damaging the sensitve electronics.
Stick with a not too powerful vacuum and the compressed air!
DIXIE

Similar Messages

How do I use Panorama / Tab Groups with the keyboard?

Yes I know that CTRL-SHIFT-E opens the panorama window, and then I can use the mouse to organize my tabs into groups.
But how do I do this with the keyboard?
I've [http://lifehacker.com/#!5719596/switch-between-tab-groups-in-firefox-with-a-keyboard-shortcut read] [http://ubuntuforums.org/showthread.php?t=1705714 that] Ctrl-`should move me through tab groups. That doesn't work for me on my Danish keyboard. (Where the ' and ` chars are weird. But is how they are on a valid standard Danish keyboard) I've tried changing the keyboard to USA and then moving through tab groups works fine.
In short: Pretend I don't have a mouse. How do I use Panorama / Tab Groups?

Sorry. These are both known bugs:
[https://bugzilla.mozilla.org/show_bug.cgi?id=587010 Bug 587010] - Add keyboard UI for manipulated groups and tabs in Tab Candy
and
[https://bugzilla.mozilla.org/show_bug.cgi?id=626594 Bug 626594] - shortcut for switching tab groups is badly accessible on many non-US keyboard layouts

On Screen Keyboard Glitch in Tablet Mode - On Screen Keyboard minimizes / disappears / slides down

Hi there -
New Yoga owner here ( just bought it yesterday) and within minutes of setting the computer up I noticed that the on screen keyboard was malfunctioning when the yoga is in tablet mode. Specifically, it pops up for about a second and then, without me touching or clicking or doing anything, it quickly slides back down. repeated attempts to bring up the keyboard end up, frustratingly, with the same result. what is perplexing to me is the on screen keyboard works fine in laptop mode (when I need it least).
Someone else already started a post on this BUT it was marked as 'solved' (which it wasn't) so I figured I'd start new thread. The solution on the previous thread was to simply 'refresh' windows to get rid of any new drivers that were downloaded since purchasing the yoga, but I did not download or update anything prior to this problem arising (as I said, the problem seemed to occur within a few minutes of turning the machine on for the first time). In any case, I tried the refresh and it did not work so clearly my problem is not that I downloaded an incompatible or faulty driver. Please Help! I love this machine and I'm trying to see past the other flaws I've noticed so far (subtle screen flickering, inconsistent touch sensitivity etc), but this issue is starting to really undermine my confidence in the product quality and, from a productivity standpoint, it is a real deal breaker to not have full tablet functionality.
Solved!
Go to Solution.

I had the same problem with the disappearing virtual keyboard within hours of starting to use my new Yoga 13. I read somewhere that it was a problem with an incompatible Synaptics driver, and when I looked in the control panel, it showed that the Synaptics driver had been updated on my Yoga as of the day I bought it. I think somehow by agreeing to automatic updates of the software, the Synaptics driver is updated to an incompatible version. So what I did was I removed the Synaptics driver, using the Windows program uninstaller tool, rebooted, and then found the Synaptics driver at the Lenovo site which is specifically labelled as the Yoga 13 driver. I installed that, and the keyboard is now working fine.

NOT disabling keyboard/trackpad on tablet fold...

This is probably the opposite of user problems regarding the keyboard/trackpad and turning the Yoga Pro 2 in tablet mode... Here's the situation:
I'm a Java programmer and I'm sharing my files with my home PC, so I can work from my laptop or desktop easily without transferring files back and forth.
It's no fun adjusting my typing to multiple different keyboards for different PCs, and overall I tend to prefer a trackpad over a mouse for what I do which makes using my lenovo yoga keyboard ideal for everything (majority of wireless keyboards also aren't backlit).
I'm using the program Mouse without Borders (from the Microsoft website) so that I can use my lenovo yoga keyboard/trackpad on my desktop.
What I want to do: keep my keyboard and trackpad enabled when putting the yoga into tablet mode. I've already figured out how to disable the touchscreen for such uses, but the only way I know to keep the keyboard and trackpad active is to uninstall the synaptics driver/software. Obviously that isn't an ideal solution to have to install and uninstall it every time I switch between PCs.
Is there any way to stop synaptics from disabling the keyboard and trackpad when in tablet mode? Preferrably something such as disabling something in device manager, not uninstalling and reinstalling software depending my use for the moment.

Please provide more information.
First, I have no idea what "Jimi to Jimi" means. This is probably just something you need to explain to me; a Google search didn't turn up anything useful.
You said that the keyboard and trackpad aren't working right. What does this mean, exactly? Regardless, the monitor you use should have no effect on the function of your other peripherals.

Mid 2013 macbook air keyboard/trackpad stop responding

I have a mid-2013 13" Macbook Air - 512GB SSD, 8GB RAM - 1.7Ghz i7
I spend a good deal of time working at my home, where I have two external monitors (one via USB, one via the thunderbolt port) and a bluetooth wireless mouse and keyboard. Things are great.
I also go on the road, and when I do, I simply unplug my monitors, close the lid, and go.
Lately, I've had some very odd behavior happen which acts a lot like what is described in the latest 13" Macbook Pro Retina EFI fix: http://www.macrumors.com/2013/11/07/apple-releases-fix-for-13-inch-retina-macboo k-pro-keyboardtrackpad-issues/
Here's what happens....when I'm traveling and away from my bluetooth keyboard/mouse, I will open up my MBA and the trackpad and internal keyboard are unresponsive. I can press the power button and get it to turn off...power it back on and am able to use the keyboard to control various boot options (diagnostics, single-user, safe-mode, recovery model, etc). Booting up full, however, the issue will still exist. Looking at the console log, when this is happening, there are a ton (about 4000 every minute) of the following :
11/1/13 7:45:26.000 PM kernel[0]: Error: AppleHSSPIController::doSPITransfer CRC from device was invalid
11/1/13 7:45:26.000 PM kernel[0]: Error: AppleHSSPIController::InterruptOccurred Failed to transfer interrupt data with Err (0xe00002eb)
Eventually, something happens and things start to work -- I will generally see the following in the console log when it starts working:
11/1/13 7:45:27.000 PM kernel[0]: Apple Internal Keyboard / Trackpad::start Start Succeeded
If I let the machine sit at the unlock screen, eventually a dialog comes up and says "unable to find external bluetooth keyboard/mouse..." It says it will continue to search and will pair with one eventually....it's the same message I would get from my mac mini if it couldn't find the bluetooth keyboard (and has no internal/hardwired keyboard).
When it is happening, I can use "cmd-r" to boot into recovery mode and recovery mode will complain about not having a mouse/trackpad - yet the keyboard seems to work to control what happens at boot time.
I called Apple and got sent to the apple store with a "it sounds like a faulty logic board or a connection that needs soldering". The Apple Store "genius" didn't quite think that was the case and has instead suggested I re-install the operating system. I'm non-plussed by both suggestions. This has happened both before and after Mavericks...
On one of my latest trips, I had a case where I took my laptop out on the plane to try to use it...only to have this issue occur. I landed, got to the hotel, tried again and everything worked fine. Went to dinner - leaving my laptop on the desk plugged in - only to come back to have the keyboard unresponsive.... I've now resorted to traveling with my bluetooth keyboard and mouse "just in case".
Any ideas/thoughts?

Mv2400
I will open up my MBA and the trackpad and internal keyboard are unresponsive.
Do four things to test for fault on this,
reset SMC ,
reset NVRAM,
uncheck "put hard disks to sleep"
and UNPAIR both your bluetooth mouse and keyboard from this Mac that you are using with it currently.
yes, the notion that your logic board is at fault is extremely unlikely, additionally (though far more likely) that your Mavericks OS is corrupt.
RESET SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
RESET NVRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Lastly, go into SYS PREFERENCES > ENERGY > uncheck "Put hard disks to sleep when possible" in both tabs.
Let your Mac go into sleep or close the lid for a few mins. and reopen and verify that your trackpad and mouse are fine. They should be after this,.........
If not contact Apple for full in shop diagnostic, theyll run a hardware test (unlikely causation) and reinstall the OS, then retest and LASTLY replace the logic board (very unlikely).

Mid 2010 no USB Mouse or keyboard power? HELP!!

I bought a mid 2010 Mac Pro 2.8ghz Nahalem from the apple store over 1 month ago. After two weeks I had a five minute issue where after I rebooted, the mouse & keyboard would not respond. One quick reboot, the mouse and keyboard had power. Now I have a TV show I have to get to the station for tomorrow and I"m having this issue again and I've rebooted five times with no luck. I"m desperate here and I need to get this working. I did buy some new RAM from the Apple store, 4GB DDR3 PC3 240 pin 512MX72-8500 ECC. I put it in with the other three 1 gig sticks for 7gigs of RAM. Rebooted, no keyboard or mouse power. shut down, re-arranged the sticks in various configurations and even went back to just the three 1 gig sticks and again, the computer will boot up, get to the login window, but no power to the keyboard or my wireless mouse or should I say not responding and no caps lock light at all. Can I not have this RAM configuration and it blew something out? The bluetooth mouse battery was changed and I checked my keyboard which has a wired connection. It is fine. I even moved it to other USB slots. No go. Has anyone experienced this? Is there a PMU reset switch on these new mac models? I've been editing forever on a dual 1.6gh PowerMac with no problems. Rock solid. Now I'm on this Nahalem and this no keyboard or wireless mouse communication is killing me with this deadline. I NEED HELP!!!

After installing Windows 7 did you also install the Chipset Driver, Intel ME Driver, Keyboard and Mouse Driver and the USB 3 Driver? If you didn't then that would account for the various hardware items not being recognized. Always install the Intel Drivers first and then the rest.
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/leno...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Problem with xfce and/or mouse and keyboard

Hi!
Two days ago I've turned on my laptop with Arch and the display manager Slim has frozen immediately. Later on Single-User mode I've uninstalled it. Now in normal mode when I type "startxfce4" everything is showing up, but the mouse and keyboard don't work. I know it's not frozen, because animation of mouse and CPU Frequency Monitor is on.
Strange fact is that laptop is not connecting with the Internet, so now I don't know where the problem is.
It's happening when I start xfce both from user and super user.
Just before those troubles I've updated everything with "pacman -Syu", but I haven't seen anything strange. Also the computer could have been roughly turned off (by unplugging power supply), when was turning on.
Thanks,
Gaba

Sorry for not replying, but I didn't have access to my laptop by this time.
On grub I have only normal mode and 'fallback' mode, so I have result from 'journalctl' from normal mode.
I'm sending the fragment of this file where you can see everything after I typed 'startxfce4' in console:
http://codepad.org/8pYIj8qC
I see that something is wrong, but after some attempts I don't know how to fix this ^^
Edit:
Oh, I forgot to write, that I've tried activate some drivers from 'lspci -k' (there were no "Kernel driver in use:..." in almost every device), but it didn't fi anything.
Last edited by gargoyle (2015-03-15 23:20:18)

Macbook Air 2012: intermittent, random freezes of trackpad and keyboard lasting a few seconds each

There have been a few other people to have reported this problem, but there has been no consistent solution for me on my Macbook Air 13" 2012, running 10.8.4.
What happens is this: while typing, the built-in keyboard and trackpad will suddenly lock up at the same time, randomly, intermittently, and for just a few seconds before returning to normal. This has been true through all the updates of 10.8.x since I bought the system last year.
During the freeze, one of the three behaviors occurs:
1) both keyboard and trackpad are completely unresponsive
2) both keyboard and trackpad get really slow, with high latency. Keys pressed show up much later or have to be pressed several times before registering. Trackpad is jumpy if it moves at all.
3) key gets stuck, sometimes the BACKSPACE key, which usually results in several dozen emails getting deleted or entire paragraphs, or rows and rows of the same stuck key. Pressing other keys does nothing.
I've spoken online with various other people who have the same problem and confirmed that the built-in keyboard and trackpad seem to be joined together whenever this problem strikes. You never see one freeze without the other also freezing.
Also, these commonly-recommended solutions don't work:
a) Reset PRAM. Done this many times. Does nothing.
b) Bring it in to Apple. Did this too. They replaced the keyboard and trackpad but the problem remains.
c) Clearing caches in safe mode. No improvement.
d) Removing "com.google.keystone.deamon.plist" and "com.google.keystone.agent.plist" doesn't seem to work either, even though the errors and behavior are exactly the same for me as for george.e.gonzalez in this thread: https://discussions.apple.com/message/19702976#19702976
These files do come back, though, thanks to Google Software Update. The keystone software appears to be part of Google Chrome, although I cannot confirm this.
e) I DO have Google Android File Transfer installed like one other person reported; they said uninstalling it fixed the problem. Unfortunately, that has not worked for me. Also, Android File Transfer is installed (same version 1.0.50.2266, same Mac OS 10.8.4) on an older 2008 Macbook, and it works fine, which points to something on just this Macbook Air as being the cause.
f) I don't use the Radio Silence firewall app--can't remove it.
g) I don't have the telldus device or whatever it is, so I don't have the "com.telldus.service.plist" to remove.
h) Completely clearing out /Library/LaunchAgents, /Library/LaunchDaemons, and /Library/StartupItems doesn't do anything.
i) Repairing permissions or repairing the volume does nothing.
j) Reinstalling the OS fresh does nothing.
k) I don't have an external trackpad, mouse, or keyboard for testing while the freezing happens, but the machine itself seems to be working, just not the built-in input devices, which are on the same USB bus.
l) Pressing ESC does not stop the key stuck situation, as it does for some people.
It feels to me like a hardware problem, not an OS problem, and it feels like a USB bus issue. I have noticed that when I insert USB flash drives, I get the same lock-up for a few seconds, something which my other Macs don't do.
I've also noticed various USB errors in the Console around the same time (same as george.e.gonzalez):
7/26/13 1:20:04.000 AM kernel[0]: AppleUSBMultitouchDriver::_deviceGetReport - DeviceRequest for reportID 0x0 returned with result 0xe000404f - retrying
7/26/13 1:20:05.000 AM kernel[0]: USBF: 844075.636 AppleUSBEHCI[0xffffff80157f1000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1a, timing out! (Addr: 2, EP: 0)
But I'm not able to precisely correlate these errors to the pause.
Is anybody else having this problem that can shed more light on it than these other suggested repairs? This has been frustrating for quite a while, but I've had the stuck BACKSPACE key delete hundreds of emails on a webmail platform that I was unable to recover using Undo and out of the trash, and that's just no longer tolerable...
Thank you, thank you, thank you, if anyone can help me fix this!

Hi, Dan--
Nope, none of those four... I do have Dropbox but never installed it on this machine. The other three are services I've never signed up for.
I am basically using these apps up-front:
Mail.app, Safari, Notes, Terminal, maybe LibreOffice 4.0.x, maybe Sublime Text 2, Console.
And the freezes happen about twice a day, usually when I'm in Mail or Terminal, but that's because those are the ones where I'm typing the most and can see immediately when the freezes happen. It could be happening even more frequently while I'm browsing, but I might not know it because I'm merely reading what's on the screen.
This is a list from Activity Monitor of what I'm using right now, which is very typical of what I use all day:
407
XType.FontHelper
dchang
0.0
2
2.8 MB
Intel (64 bit)
278
xpcd
dchang
0.0
2
5.0 MB
Intel (64 bit)
313
WebKitPluginAgent
dchang
0.0
2
944 KB
Intel (64 bit)
250
usernoted
dchang
0.0
2
4.0 MB
Intel (64 bit)
233
UserEventAgent
dchang
0.0
3
7.6 MB
Intel (64 bit)
347
Terminal
dchang
0.0
5
51.3 MB
Intel (64 bit)
280
tccd
dchang
0.0
2
3.8 MB
Intel (64 bit)
243
talagent
dchang
0.0
2
6.2 MB
Intel (64 bit)
244
SystemUIServer
dchang
0.1
3
26.5 MB
Intel (64 bit)
4254
System Preferences
dchang
0.5
3
24.8 MB
Intel (64 bit)
995
Sublime Text 2
dchang
0.0
12
82.5 MB
Intel (64 bit)
380
ssh-agent
dchang
0.0
3
3.0 MB
Intel (64 bit)
4321
ssh
dchang
0.0
1
2.0 MB
Intel (64 bit)
4276
ssh
dchang
0.0
1
2.0 MB
Intel (64 bit)
335
ShareKitHelper
dchang
0.0
2
9.1 MB
Intel (64 bit)
429
ScopedBookmarkAgent
dchang
0.0
2
5.0 MB
Intel (64 bit)
318
Safari Web Content
dchang
2.1
23
835.4 MB
Intel (64 bit)
316
Safari
dchang
0.2
17
127.9 MB
Intel (64 bit)
3975
QuickLookSatellite-general
dchang
0.0
4
6.0 MB
Intel (64 bit)
3974
Quick Look Helper
dchang
0.0
4
6.4 MB
Intel (64 bit)
3978
QTKitServer-(3975) QuickLookSatellite-general
dchang
0.0
2
3.7 MB
Intel
319
QTKitServer-(318) Safari Web Content
dchang
0.0
5
8.2 MB
Intel
3979
QTKitMoviesValidator-(3978) QTKitServer
dchang
0.0
3
5.3 MB
Intel
359
printtool
dchang
0.0
2
5.4 MB
Intel (64 bit)
327
pbs
dchang
0.0
4
3.7 MB
Intel (64 bit)
249
pboard
dchang
0.0
1
904 KB
Intel (64 bit)
254
Notification Center
dchang
0.0
3
18.4 MB
Intel (64 bit)
676
Notes
dchang
0.0
9
47.1 MB
Intel (64 bit)
277
NetworkBrowserAgent
dchang
0.0
3
4.4 MB
Intel (64 bit)
4156
mdworker
dchang
0.0
3
11.7 MB
Intel (64 bit)
298
Mail
dchang
0.0
11
151.5 MB
Intel (64 bit)
302
lsboxd
dchang
0.0
2
3.4 MB
Intel (64 bit)
54
loginwindow
dchang
0.1
2
25.8 MB
Intel (64 bit)
3589
LibreOffice
dchang
0.2
6
105.9 MB
Intel
230
launchd
dchang
0.0
2
1.4 MB
Intel (64 bit)
469
iTunes Helper
dchang
0.0
3
3.8 MB
Intel (64 bit)
258
imagent
dchang
0.0
3
5.3 MB
Intel (64 bit)
3508
Image Capture Extension
dchang
0.0
3
9.7 MB
Intel (64 bit)
3980
helpd
dchang
0.0
2
2.0 MB
Intel (64 bit)
270
fontd
dchang
0.0
2
6.5 MB
Intel (64 bit)
322
Flash Player (Safari Internet plug-in)
dchang
1.7
21
255.7 MB
Intel (64 bit)
245
Finder
dchang
0.1
5
73.1 MB
Intel (64 bit)
242
Dock
dchang
0.0
3
43.1 MB
Intel (64 bit)
234
distnoted
dchang
0.0
4
4.1 MB
Intel (64 bit)
3550
Dashboard
dchang
0.0
8
24.5 MB
Intel (64 bit)
663
cookied
dchang
0.0
2
3.4 MB
Intel (64 bit)
499
Console
dchang
0.0
2
26.8 MB
Intel (64 bit)
326
com.apple.NotesMigratorService
dchang
0.0
2
10.9 MB
Intel (64 bit)
4328
com.apple.iCloudHelper
dchang
0.0
3
5.5 MB
Intel (64 bit)
685
com.apple.hiservices-xpcservice
dchang
0.0
2
2.5 MB
Intel (64 bit)
315
com.apple.hiservices-xpcservice
dchang
0.0
2
2.5 MB
Intel (64 bit)
279
com.apple.dock.extra
dchang
0.0
2
13.9 MB
Intel (64 bit)
320
com.apple.audio.SandboxHelper
dchang
0.0
2
2.6 MB
Intel (64 bit)
3976
com.apple.audio.SandboxHelper
dchang
0.0
2
2.6 MB
Intel (64 bit)
3977
com.apple.audio.ComponentHelper
dchang
0.0
2
2.7 MB
Intel (64 bit)
321
com.apple.audio.ComponentHelper
dchang
0.0
2
2.9 MB
Intel (64 bit)
236
cfprefsd
dchang
0.0
4
11.6 MB
Intel (64 bit)
262
CalendarAgent
dchang
0.0
6
22.5 MB
Intel (64 bit)
4318
bash
dchang
0.0
1
1.2 MB
Intel (64 bit)
4121
bash
dchang
0.0
1
1.2 MB
Intel (64 bit)
329
AppleSpell.service
dchang
0.0
2
14.8 MB
Intel (64 bit)
261
AppleIDAuthAgent
dchang
0.0
3
2.0 MB
Intel (64 bit)
4330
Activity Monitor
dchang
2.5
5
17.9 MB
Intel (64 bit)
272
accountsd
dchang
0.0
2
3.5 MB
Intel (64 bit)
At this time, the only thing generating errors in the console log is the now-famous "coreaudiod[246]: Enabled automatic stack shots because audio IO is inactive" error that is considered normal behavior...

I am having keyboard problems when trying to boot up an OS (bootcamp on Mac Mini Server)

I recently tried using bootcamp on my new Mac Mini Server.
I uploaded a windows ISO Image perfectly the way it asked, Windows 7, I followed the correct steps, euqally divided one of the hard drives, and I was ready to actually set up the new Windows section of my computer. During this booting session, my dog came in the room with her ball and knocked the computer plug out of the socket. Now when I turn on the mac, the fan still works, the same Macintosh sound comes up, the screen turns that usual very bright gray, but it stays on that gray. After a minute or two, the screen turns black, with a blinking underline, as if it were confused to choose which operating system it has to boot.
My problem here is that I use a wireless keyboard (not by Apple) -- and I suppose that bluetooth syncronizes with the OS and not the computer system itself -- so my keyboard commands do not get recognized in order for me to navigate into Windows 7 or OS X Mountain Lion. I tried solving this problem by purchasing a brand-new USB keyboard (since Mac Mini Servers do not have the PS/2 entrance). I guess this new USB keyboard didn't work, I imagine, either because the USB slots on the machine are not recognized by the computer's internal system, only by the Operating Sysytems (which I hope isn't true), or that the mac had never used that USB Keyboard and wasn't going to be capable of using it until it had installed the necessary drivers, but without the OS running that would become impossible.
So my question is: Is there a way that I can connect a keyboard to the mac so I can continue installing my alternate Operating System? Is it maybe another problem all together?

It is starting to sound more like Bootcamp failed to install properly.
Have a look at > Boot Camp 5: Frequently asked questions
then perhaps > Failed bootcamp instlation - Google Search

Brand New MacB Air and i haven't been able to get passed the format which has had to be done twice because, I have a French Numeric Keyboard and Language in English. The minute I type in my password, the keyboard gives me letters that i did NOT type.

I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,. When setting up I chose the French numerique keyboard, although there are two choices French or French numerique. I put in my language as English. When all was set up I came to the start page and had to put in my password, by the grace of g....I just happened to see the first letter I typed before it turned into a dot. My password which was supposed to start with the number 2 showed a french e with accent before it quikly became a dot.
Because of the dot system, this meant that I had no clue what the keyboard was typing as my password ...........and true enough my password was not accepted despite my trying all combinations. I have had to reformat twice now thanks to Apple Chat and both times my password was not accepted. I am in the process of formatting it again, this time on my own. If the Start page does not accept my password again this can only mean that the Mac left the factory with faults. I could not be more disappointed with the money spent and the time and trouble that Apple Chat and I have spent in trying to correct a brand new out of the box Mac. I have a cheap Toshiba laptop also with a french keyboard and english language which gave me no trouble at all. I am not impressed with the so called King of computers! First of all the dot system is daft. People want to be able to see and confirm their passwords before they are set for good. Second, this problem is going to give me a lot of grief. Switzerland business is not renowned for its after sales service or the time it takes to do repairs. When I had an issue with my Vaio laptop which was still under warranty, they kindly picked it up from my house, repaired and promptly returned it. How's that for good proper service.

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

Open and Close OnScreen Keyboard while focus gain on JTextField

Hi
I have a Jtextfield when ever I click on textfield I want to open OSK(On Screen Keyboard) of Windows 8 OS and windows 7.
I tried in below mentioned way to open and close in focus listener focusGained() and focusLost() but it is not working. could some body do needful.
Opening OSK:
builder = new ProcessBuilder("cmd /c " + sysroot + " /System32/osk.exe");
Closing Osk:
Runtime.getRuntime().exec("taskkill /f /im osk.exe");

You need to start() the ProcessBuilder and you need to split the command like this:
builder = new ProcessBuilder("cmd", "/c", sysroot + " /System32/osk.exe");
builder.start();
And naturally you should wrap the call in a new Thread or use an ExecutorService to avoid EDT problems.

How do you use the same wireless keyboard with multiple devices?

My apologies in advance if this question has been answered previously. There was nothing in the owner's manual (for the keyboard) that answered this. I did do a rough search that did not yield an answer to this:
I have one wireless keyboard I am using with my Macbook Pro. I understand this keyboard can also be used as an input device for my Apple TV and my iPhone - both of which I currently own.
And although I am able to use the keyboard with those devices, I am forced to "forget this device" after having used it on either the Apple TV or my iPhone so that I can use it on my MacBook Pro. Is there any combination of keys that one can press on the keyboard that would cycle through my three devices? As it is right now, if I don't "forget the device" on my secondary units, it somehow defaults to a peripheral OTHER than my MacBook Pro and I'd like for it to always default to my computer.
Thank you for any information/advice.

Bump

How do I turn on long press keyboard to write the same character many times with one keystroke only? I can only write 1 letter at a time with each key press. To write "aaaaa" I need to press 5 times the A key. I didn't use to do this.

I know this has something to do with INSERT key in Windows I guess. But suddenly I was using Mac OS X Lion and a keyboard sign appeared in the top bar, and the keyboard didnt work as it usually does. I mean, I wanted the long press key to write multiple caracters of course. Please help!

It's now a hidden option that can be turned on with a terminal command. The easiest way to do this is to download TinkerTool from this site:
http://www.bresink.com/osx/0TinkerTool/download.php5
Then go to Tinkertool > General tab > Select "support key repeat".
Logoff and login again.
Regards,
Captfred

How can i disable Illustrator from changing my language / keyboard layout.

I have an azerty laptop and a qwerty external keyboard. Switching from any application to illustrator changes the language and therefore also my keyboard layout. No other application does this.

Thanks for the reply Mike
But i have a laptop with azerty layout (Belgian) and an external qwerty keyboard (Brittish).
So i need both languages selected in the System Pref >> Keyboard >> Input source
When "Brittish" is selected and i switch from Apple Mail to Photoshop to Skype to Chrome to ... it all works fine.
Only when i switch to Illustrator it also changes my language/layout from "Brittish" to "Belgian" and stays like that. I need to manually change it back in the menu in Finder.
I like the brittish better (with a qwerty keyboard) because of the shortcuts (eg. sqare brackets -> shortcuts for order in Illustrator are not even on an azerty (Belgian) keyboard).
Any idea?
b.

How can I change an english/american keyboard to a danish one?

How can I change an english/american keyboard to a danish one on a Macbook Air?

Apple menu / System Preferences / Keyboard / Input sources.
Click + (bottom left) and in the pane that comes up, select Danish on the left, and click Add.
Of course that can only change what the keys actually input, not what is written on the keys. If you wish to change the physical look of the keys as well, get in touch with Apple and ask if they can replace the keyboard.

9630 Keyboard/Buttons not working; hard resets and multiple reloads of OS did not correct

My BlackBerry 9630 Tour is a little more than a year old. Yesterday the keyboard, trackball, and all buttons stopped working while I was typing out an email. I could not power off the Blackberry without removing the battery for a hard reset. Unfortunately, even after many hard resets, the problem persisted, so I went to the forums for help and tried everything that seemed relevant (multiple times) with no success.
After reviewing a number of tech support posts, this problem does not appear to be unique to any given model of BB and contact with liquids is cited as a common but not the only cause for this condition.
I was outside on a very hot and humid day when the malfunction occurred so it is possible some perspiration may have come into contact with the keypad, convenience buttons, or trackball and caused the lockup.
I'm looking for someone with more smarts than me to help me troubleshoot, identify the actual problem, and identify the proper corrective actions. See below for a synopsis of my actions taken, with the exception of taking it to the shop for repair/replacement.
The corrective actions listed on the forums and blogs are varied but essentially fall into two primary solutions:
1. If moisture is suspected to be the issue, let the BB dry out overnight
    a. Pull the battery, naturally air dry or use a blow dryer, let it sit unplugged with no battery for at least 12 hours
    b. If this doesn't immediately work, try a clean install of the OS (see below)
    c. If this doesn't work, take to the shop and they'll either replace the keyboard and/or trackball or replace entire unit
2. If moisture is not suspected to be a factor then perform a backup followed by a clean install of OS
     a. Backup your files using Desktop Manager Backup and Restore
     b. Do a clean reinstall OS using Desktop Manager Application Loader
         i. The OS installation process is dicey and takes a little patience and focus-- you have to wait for the Desktop Manager to properly recognize the device before it can proceed on some of the steps and it may take several iterations to get completely through the process and get the "successful installation" message.
         ii. Further, you may need to keep the battery removed during the initial steps in the process and only insert it when the process gets to the point of actually trying to copy files into the BB memory
            * The BB LCD will display an icon that looks like a battery with a slash through it letting you know the process cannot proceed until a battery is inserted and the Desktop Manager Application Loader will also give you an error indicating it cannot find the device.
            * After inserting the battery, it will take a few seconds or more for the computer to recognize the USB device and for Desktop Manager to respond with the BB password pop-up window.
            * After typing in your BB password, the installation should continue.
    c. If you can get the OS successfully reloaded and your keyboard/trackball/buttons work -- great -- now restore your files and settings using Desktop Manager Backup and Restore and get on with your life.
    d. If this does NOT work after multiple successful clean OS installations apparently you are completely hosed; the only other option is to get it to the shop for repair or replacement.
1.. Does anyone have a troubleshooting procedures that will identify whether moisture is the root cause or not?
2. Is there another corrective procedure that's been missed?

Took BB to Sprint Store and technician took it apart, saw no evidence of moisture or any other damage, and concluded that the keyboard had failed. Not an uncommon occurance.
Also, he told me you cannot simply replace the keyboard, it is integral to the systemboard, so you need to replace the entire device.
He did commend the troubleshooting approach used prior to going to the store -- most folks won't take the time to do even basic troubleshooting (like taking out the battery), they just go to the store and say "fix it please". He confirmed that the steps outlined in the initial post were correct and did not have any other solutions.
Take away:
If you want to do some troubleshooting yourself to check for moisture, the process was pretty straightforward. After watching the technician, most folks with a little technical or mechanical aptitude should be able to manage the dismantling process. You just need a small phillips head screwdriver and a little patience. Good lighting and a magnifying glass or reading glasses also help!

Keyboard

Similar Messages

Maybe you are looking for