Keyborad layout in new models

Hi:
I've noticed that in new models (T410 and so on) there's a change in the keyboard layout, so now there's a double sized "Supr." key instead of the "Insert/Supr." keys.
Is there an option keyboard with the old layout?
I've a T400 which I'm thinking to replace but I can't use that new keyboard configuration (after years using the old layout is just to hard for my "fingers" to change, since my very old T23, I'vent changed to any other brand because of the keyboard!) I've tested it on a T410 and I made too many typos because of it.
Thanks

In the Ideapad P500  the hotkeys change volume, screen brightness etc.   This is backwards from the usual standard of pressing Fn + F (hotkey) to affect changes  Is it possble to change the hotkeys to work only when the Fn key is pressed? Many programs us the F() keys for routine tasks e.g. F7 to spell check in MS Office
Hotkeys are a huge negative for me.   In one of my programs I use the F1 to F8 keys three or four times a minute and it is very inconvenient not to have use of these keys.  I may change the screen brighness or volume 2 or 3 times a month, how necessary is it to have such minor functions available when many more important ones are unavailable? 

Similar Messages

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • I just bought a new iMac and now I am trying to use it as a screen for my Macbook pro, but it don't have a Mini DisplayPort the new model only have Thunderbolt which my Macbook don't have. Is there any way to connect this two mac's anyway??

    I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??

    Screen sharing setup in 10.5, 10.6 are described by the links by operating system.  10.7 is fairly similar to 10.6.
    And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines.  Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist.  There are no Firewire to USB cables.

  • How to customize Category and Category items list while creating New Model

    Hi,
    what the most convenient way to customize the Category and Category items list while creating New Model?
    This is standard:
    Now, what we want to achieve, is to customize this menu, to:
    1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
    I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
    1. Customize the standard New Model menu window
    2. Create copies of City Planning Diagrams with different set-ups
    3. Set the relationship between diagrams
    Is such a configuration change possible?
    Thanks a lot for your help!
    Regards,
    Rafal

    Now, what we want to achieve, is to customize this menu, to:
    Question #1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    Click on Tools => General Options=> Model Creation
    Click on Properties => at right of Default category set
    Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
    In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
    To create a new category set with BPMN choice
    a) Copy default.mcc in MyNewDefault.mcc file.
        Go to Tools=>General Options=>Model Creation : Select your new category
        Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
    or
    b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
        Quit the window.
        Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
        Edit properties and remove all things you does not want keep.
        Save you new category
    Question #2. How to define copies/replicas of existing diagrams
         Wrote an extension
    Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
         Specify yours conditons in your extension attached to your model
         Example : When the user want create a child diagram :  You can display a list of Parent Diagrams to select from.
         You can set in your extension by VBScript parent-child relationship
    Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
    If I understand well your question. I suggest to take a look in
    Repository=>Administration=>Objects Permission Profile
    You can specify objects to show, mask, deactivate at model level.
    You can specifiy your own metadata.
    But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
    Message was edited by: Benoit Le Nabec

  • Unable to load data store in a new model

    Hi,
    I have Win XP Pro SP3. MS SQL 2008 which has adventure works DW2008R2 database. I have oracle data integrator.
    I have created a physical and logical schema and have established a connection with my MS SQL 2008 and the test connection is successful. I create a new model folder and a new model within. In the new model, I gave technology as microsoft sql server , logical schema name selected, and in reverse tad: standard, context:global and when i click on "reverse" no tables with are seens under the new model.
    no error message either. I have been trying to figure this out for the last 12 hrs...can someone please suggest/guide me here please. this is my first time using ODI.
    Goo

    Hi,
    Thanks for the reply. I thread you provided gives details about how to get connected. But as i mentioned earlier, i can connect. I am just not able to bring in data store...
    Any help will be appreciated. I can send the screen shot if you would like.
    Goo

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder ..that doesn't have firewire out/input?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • How many times do you get a new iPhone because of manufacturing  defects, before you can ask for an newer model?

    How many times do you get a new iPhone because of manufacturing  defects, before you can ask for an newer model?

    yofromoslo wrote:
    How many times do you get a new iPhone because of manufacturing  defects, before you can ask for an newer model?
    You don't.  Apple's warranty provides for replacing your device with an identical model (same model, carrier, capacity & color).
    And you aren't getting a new iPhone.  You'll be getting a remanufactured iPhone, which has gone through a more thorough inspection than any new iPhone ever does.
    If you want a newer model, then trade-in or privately sell your current device and use the proceeds towards purchasing another device.

  • IPad 1 Safari Crashes Constantly and getting worse day by day.  Has Apple come up with a solution?  Now I am hearing its alos happening on the newer models.  My company is about to buy a lot of tablets and I will not recommend Apple anything til they fix.

    iPad 1 Safari Crashes Constantly and getting worse day by day.  Has Apple come up with a solution?  Now I am hearing its also happening on the newer models.  My company is about to buy a lot of tablets and I will not recommend Apple anything until they fix the problem.  Granted 30 or 40 iPads is not a huge impact but i promise once the outside world hears about this BS things will change.  There are plenty of other tablets out there that do not have this problem.  At the very least we should have the option of rolling back to a stable IOS...

    I have already tried all the things mentioned above as well as other things such as other browsers etc.  Its is obviously a problem with the hardware.  I also borrowed a brand new 4th gen iPad and it does the same thing.  Even after upgrading it to 6.01.  An occasional crash is one thing and can easily be waved off but this is clearly systemic and the problem appears to be related to graphical images and videos.  Both iPads are the 64gb versions, the only difference other than model is the iPad 1 has ATT cellular.  The new version is clean i.e no other APPs loaded other than what came with it.  I have 7 more coming but im seriously considering sending them back in favor of an Android tablet or the MS Surface.

  • Issue opening an existing model or creating a new model in VC 7.0

    Hi All,
    We have installed VC 7.0 and upgraded to EP 7 (SP08). We followed everything that was on the installation guide and have all the prerequisites installed both on the client and the server machine. We are on a Windows 2003 Sever and we have both MS XML Parser 4.0 and j2sdk 1.4.2_09. On the client side,we have both XML Parser 4.0 and SVG Viewer3.0
    The first time, I tried to create a model in VC 7.0, I could successfully create one. When I tried to open the model that I created, I was unable to do so. In addition, I could not create any more new models. The error I get in the message box while trying to open/create a new model is
    "Proxy Error: Server Error: Failed to load rules list of model"
    "Model root is bad or missing"
    Your help in this matter is greatly appreciated!.
    Thanks,
    Mansha

    Mansha,
    I was able to finally find the property, and this did solve my problem.  Following is a bit more detail on the fix, in case someone else runs into this problem.
    1) open the J2EE config tool from C:\usr\sap\XXX\XXXX\j2ee\configtool
    2) expand the instance node and press on the "server_XXX" node
    3) under the java parameters list in the right side of the screen add the following line:
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sap.engine.lib.jaxp.DocumentBuilderFactoryImpl
    4) press the Save Button.
    5) restart server instance
    Thanks!
    Regards,
    Brian

  • I have iphoto '08 version with an imac osx 10.5.8. It will not read my RAW files  from my Nikon D800 - a very new model.How can I get it to read my RAW files?

    my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW  files?

    iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.

  • I want to replace one of my older Airport Extremes with the new model.  Any tips?

    I have 2 older airport extreems that are connected by a network cable.  They share the same Netrwork ID.
    I want to replace one of them with the new model as I want to use the old router on another project.
    Any tips out there for a no-issue switch?
    Should the newer and faster Extreme be connected  to the Modem or does it nt make a didfference?
    Thanks

    use the new router as your primary router with the modem - this will be a factory  install from the default configuration -   as long as you use same network name password and type a password that you used for the express in bridge mode, you should be able to plug it in and have it work like before.  just make sure that you configure everything individually and then power all devices down and repower each one individually starting with the modem then the router in the express and that should work 

  • Is the new model number for iPad MC706B? What was the model number for iPad 2?

    Is the new model number for ipad MC706B? What was the model number for ipad 2?

    iPad 2 Model No: A1395, A1396, A1397
    iPad 3 Model No: A1403, A1430, A1416,
    iPad 4(current model) Model No: A1458, A1459, A1460
    You can learn about serial numbers, model no's about iPad, iPhone, iPod and Mac from: http://www.everymac.com/ultimate-mac-lookup/

  • How do you transfer pictures,video's and text messages from iphone 4 to the new model

    How do you transfer pictures,video's and text messages from iphone 4 to the new model?

    http://support.apple.com/kb/ht2109

  • Power unit from older MacBook Pro - using it with newer model

    I once had a MacBook Pro, one of the early version, bought somewhere in August 2006. Now I have the power unit that is left from it. I want to use it with my current MacBook Pro which is newer model, but not the one which is currently sold - it is NOT the unibody model, it looks exactly like the previous model, but with better spec, and the notable difference is that on the previous model the green diode near camera had a single hole, and the newer model has lots of tiny miniholes there, which makes it completely invisible unless the diode is lit.
    (unfortunately I have no idea how to identify those two models more correctly - model numbers or whatever)
    When I compare the power units - the one which I have with my current model, and the one which is left from the previous, the newer is a bit smaller, and the power output markings are a bit differently organised, not totally identical, but they show what I understand is same voltage/amperage.
    I'm still a bit cautious about using the power unit from the older model. Did anyone tried it, is it safe?

    Next time you can use Mactracker to identify your machines exactly:
    http://www.mactracker.ca/
    Go to >About this Mac>More Info and you will see the Model Name and Model Identifier.
    Good luck!

  • IPad 3 and older digital av adapter. It works, but is there reason to get the newer model?

    I have an iPad 3. I also have an older model digital av adapter. It's model MC953ZM/A. Although its older it still works fine with my iPad 3 even though it says it's not supported when I plug it in. Is there any benefit to purchasing the newer model digital av adapter?
    Thanks.

    Other than not getting that message, or having Apple perhaps not support it should you call or visit them asking for assistance (I don't know if they'd just tell you to get the newer adapter, but it's possible), no, there's no reason I know of to buy the newer version of the adapter.
    Regards.

Maybe you are looking for

  • Case statement Not working with Oracle version 10g

    Below is code , which works on 11r2 but not on 10g. declare v1 VARCHAR2(200); begin select version into v1 from DBA_REGISTRY WHERE COMP_NAME LIKE '%Catalog Views%'; CASE       WHEN v1 like '10.2%' THEN DBMS_OUTPUT.PUT_LINE('it is  10.2'); dbms_stream

  • Error log during transport(SE09) DEV to Quality

    Hi, I am facing issue while transporting object Development to Quality, please find below the details. I have created one class. 1. Created one(first) method and calling new method(which is doesnt exist as of now). 2. Created another(second) method w

  • Ping TPowa: Error Building kdelibs-3.5.7 at dnssd stage

    I am trying to rebuild kdelibs using makepkg, but I get the following error when it tries to compile dnssd Making all in dnssd make[2]: Entering directory `/var/abs/extra/kde/kdelibs/src/kdelibs-3.5.7/dnssd' /bin/sh ./config.status --recheck /bin/sh:

  • Connecting to the Oracle 10g Database through Java code

    I have a Oracle 10g database to be connected to. Through sql plus, I can connect to it using the following command sqlplus "sys@pmi as sysdba"and password is 'password' how do I connect to this db through my Java code? I tried _connection = DriverMan

  • Still Images & Need to 'Scale to Sequence'-Vertical vs. Horizontal Picture

    I make sequences from still images only. I need to start editing with all images at a Scale (in the Basic Motion section) of 100. When the original image is 720 width x 540 height (a picture taken horizontally), it appears in the timeline at a Basic