Keybord doesn't work correctly (Satellite Pro 6000)

hi,
I've a Problem with the keyboard of my SP6000: when I press "3" I get "93"; "d" ==> ".d"; "e" ==> "oe". When I hold "3" I get "93333333333333333" a.s.o. I've allready changed the keyboard, without success.
I get this Problem with XP, Knoppix and DOS.
Brgds and thanx for answers.
tom from hamburg

Hi Tom,
in my opinion you should bring the notebook to a Toshiba Service Partner. It could be that the Keyboard cable is loose or as you mentioned the controller is damaged!
So bring it to a short check up. The earest Service Partner could be found at http://eu.computers.toshiba-europe.com - Support & Downloads - Find an authorized Service Partner.
PS: An EC/KBC update is a update for the keyboard controller but this could only be arranged by a Service Partner!
Bye Rudi

Similar Messages

  • Satellite Pro 6000: Cannot find correct WLAN driver

    Hi,
    I have re-installed Windows Xp on my notebook Satellite Pro 6000. All is working except for the wireless connectivity.
    When looking in the device manager, I see that the WLAN driver has not (or incorrectly) been installed.
    So looked at the Toshiba site for the corresponding drivers, but I am not able to find the correct one. I did found some drivers, which seems to be the one, but unfortunately after installing the drivers, the wireless connectivity is still not available.
    Any help would be appreciated.
    Thanks in advance.
    Regards, Robert

    Hi
    I dont believe that you cannot install the Wlan driver.
    Go to the device manger and find out which Wlan card was installed. (check properties)
    If the WLan card is placed under network adapters so the driver was installed properly.
    But if you see a unknown device in device manager so you need the WLan driver.
    Then download the WLan driver from the Toshiba site. Be sure that you use the right driver for the right OS!
    You can try firstly to uninstall the old driver and then to install the new one.

  • Satellite Pro 6000 doesn't boot anymore

    Hi all,
    I have a Satellite Pro 6000 that is quite old, but until yesterday it was working fine. Today, it won't start anymore. The indicator LEDs are on (220v:green/power:green/battery:orange) but the BIOS or OS won't start. Fan doesn't work either. The FN key seems to work - if I press it, the indicator below F11 lights up. If I press and hold the power button the power indicator LED goes off.
    I've removed the battery to see if that might help, but it basically gives the save (non)result.
    Is there any way to do a hard reset? Or is it curtains for this laptop?
    Like to hear your thoughts on this one.
    JP

    Hi
    Try to disconnect the AC adaptor and remove the battery a leave the notebook for a while. Wait about 20-30 min, connect all parts again and try to boot up.
    If it will not work I assume the notebook hardware malfunctions Maybe its a motherboard fault (power supply electronic) or CPU.
    Who knows. Without any hardware tests its not easy to find out what device malfunctions

  • Maximum HDD size for Satellite Pro 6000?

    Hi, I am trying to install a 60 GB HD, but it formats, and it stops at Windows XP Pro instalation.
    Is there a limit to HD size?
    Thanx,
    Ronaldo

    Hi,
    does it stop without any error message? If not then try another copy of WinXP since the Satellite Pro 6000 shouldnt have problems with that harddrive. I had 2 years a similar machine and I also had a 60GB Toshiba HDD installed. It worked like a charm, so I cannot imagine that the harddrive could be the problem.
    Cheers

  • Satellite Pro 6000 will not boot or do anything

    Hello,
    my satellite pro 6000 stopped working all of a sudden.
    Power led, battery, keyboard leds are on, but nothing happens, tried to remove battery,cd, hd and put them back, nothing seems wrong.
    Also tried the backspace trick in case but did not do any good.
    It just does not start at all.
    Any ideas out there ?
    Thanks
    [Edited by: Forum Moderation]

    Hi,
    unfortunately all the leds are working fine, no blinking that could point out a problem.
    I am afraid that the motherboard might be cooked, I have seen similar symptoms on the net, it seems like a know issue at toshiba.
    FP

  • Link on my website doesn't work correctly on my iMac. It works correctly on Safari, and both browsers on my laptop.

    Link on my website doesn't work correctly on my iMac. It works okay when using Safari. It also works correctly on my laptop using either browser.

    We worked out my problem. My solution turned out to be: Firefox Preferences/Applications. Scroll down until you find "Portable Document Format (application)", click on it and use the dropdown menu to the right and changed "Save file" to "Use Adobe Acrobat Pro (default). I had trouble at first finding if the listing was under Adobe, Acrobat, or what so I used the search feature and found it immediately.
    Hope this helps.

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • Game Center doesn't work correctly

    Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
    It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
    Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
    The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
    I've restored my device several times, but it didn't help.
    How to solve it?

    I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
    There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
    Other than waiting for Apple to fix it I don't think there is a solution.

  • AddChild doesn't work correctly in 11.9

    comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows  7 IE debug version and I see no script errors
    Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
    (Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)

    Could you please open a new bug report on this over at bugbase.adobe.com?  When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally.  If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]). 
    Once added, please post back with the bug URL and I'll investigate internally.
     

  • IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords

    iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz

    It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
    report to Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • After upgrade my iphone 4 to IOS6, sound doesn't work correctly

    After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
    During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Translation from CS5 to Cloud doesn't  work correct, navi and linked images are broken.

    Translation from CS5 to Cloud doesn't  work correct, <navi> and linked images are broken.
    The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

    Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
    This implies your site is not properly defined in DW.  Go to Site > Manage Sites.
    Or simply go to your other installation of DW and export the site definition file from Manage Sites.
    Save it to a flash stick or other removable drive.  Then import the STE file into your 2nd installation of  DW.
    Nancy O.

  • ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

    iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

    Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
    For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
    System:
    Windows 7 Ultimate x64
    iTunes 10.4
    ATI 5750 video card

  • [svn] 4028: Bug: Draining of buffered messages doesn' t work correctly with long-polling.

    Revision: 4028
    Author: [email protected]
    Date: 2008-11-06 09:04:26 -0800 (Thu, 06 Nov 2008)
    Log Message:
    Bug: Draining of buffered messages doesn't work correctly with long-polling.
    QA: Yes - please make sure both nio and regular long-polling channels work with throttling.
    Doc: No
    Checkintests: Pass.
    Details: Made sure that buffered messages are drained properly with all polling channels (polling, long-polling, and nio-long-polling).
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

    Sounds like you've probably already looked but the CUPS article in the wiki led me through setting up a printer without any problems.  http://wiki.archlinux.org/index.php/CUPS
    The first section describes how to troubleshoot CUPS and printing problems.
    I've also found a few other posts and links that may help.
    http://hplipopensource.com/hplip-web/mo … eries.html
    http://ubuntuforums.org/showthread.php?t=419163
    Hope this helps!

  • How can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    how can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    On your Mac, for duplicates, switching Contacts off then back on in System Preferences > iCloud may prevent duplicates.
    On the iPhone / iPad tap Settings > iCloud. Make sure Contacts and Calendars are swtiched on.
    Try restarting your Mac and your iOS devices when items won't sync as they should.
    To restart an iOS device:  Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

Maybe you are looking for

  • Error installing EM10gR2 Configuration assistant "Web Cache Configuration A

    I am getting an error when the web cache configuration assistant is running. Here is the output of the message: Output generated from configuration assistant "Web Cache Configuration Assistant" (attempt 2): Command = /oracle/oms10g/jdk/bin/java -DORA

  • Why won't my Computer connect to my WiFi

    I recently came home from my first year of college. At school I uesd my Macbook everyday and connected to the school WiFi just fine. I came home and my computer seems to hate the WiFi here. That's not the bulk of it, though. The macbook is pretty qui

  • Undeploying a JMS Bridge using command line

    Hi,           I have a messaging Bridge that I am trying to undeploy from the console but that is not happening due to some reasons.           I want to undeploy the bridge from the command line. How do I go about it?           Rommel Sharma.

  • New iPad crashes Mac when syncing photos

    I've got my New iPad and am attempting to sync about 1500 photos. When the sync reaches the photo portion it begins to copy the photos, however after a few are copied my mac shuts off completely to black screen - gone! This was not a problem on my iP

  • Berkeley DB JE no in-memory option ?

    Hi, Is there any way to create the berkley databse in memory ?