Keybored dose not work to boot from cd

i have the k8t neo
and a logitech mx duo
my keybored dose not work while trying to boot from cd
it works in bios/scandisk
any suggestions or ideas?
Thanks for any help

it said if i used the purple ps/2 adapter the special buttons wouldn't work
so that is why i took mine off
on my old system it worked but i never had an editable bios options either
it works great now that i have enabled the legecy support like stated above.

Similar Messages

My iPhoto dose not work from 0:00 Sunday. I was deleting and downloaded again but dosn't work! Why?

My iPhoto '11 dose not work from 0:00 Sunday. I was deleting and downloaded againg but the problem is same.

Sorry but we need more to go on thatn it does not work
what happens? what does not happen? what error messages to you get? if it crashes post the first 50 lines of the carash report
LN

Keyboard not working at boot and CD won't boot

Hello everyone,
I think I have a very particular issue that hasn't happened to many people since I could not find any topics talking about this already. Before I begin, let me excuse myself for my bad english writing.. it ain't my primary language.
Ok so I was already running Mac OS X 10.5 and decided to try bootcamp so I could use Autocad in Windows XP. What I did is start the bootcamp assistant and install Windows XP. After the installation my computer was booting with that "Disk error" message.
Ok no worries, I had all my files backed up on my external hard drive but for some very weird reason, my original Mac OS X Leopard DVD would not boot anymore and it was still saying "Disk error". I decided to try holding "C" at startup to boot from the DVD but it would not work. I can hear the DVD working but it's still not booting from it.
I thought my DVD was defect so I try booting up from my Windows CD and when it asked me to "press any key to boot from CD" i realized that my keyboard was not working during startup. Any startup key like "C", ALT, Command or any other keys were not working. Even the light on the capslock key would not work when i pressed the key.
I had an old Knoppix Live CD which is a Linux and that booted fine. When that boots it asks me to press a key to boot or to wait 2 minutes and it will boot on it's own. I couldn't press a key to boot so I waited 2 minutes and my keyboard started working when the Linux OS was booted. I managed to erase the partition table of my harddrive to start from scratch but my Mac OS DVD would not boot either way and my keyboard is still not working at boot (in the gray screen where you can actually use startup shortcuts normally).
I also tried to boot with my old Mac OS 10.4 DVD and I had the same results.
Before you ask, yes I tried another USB keyboard, I also tried all 3 USB ports. The only thing that works at boot is when I hold the mouse button to eject my CD/DVD. But all my keyboard shortcuts doesn't work and I can boot from any installation CD (windows, linux) but not Mac OS 10.4 or 10.5.

Okay so I managed to fix this problem with another apple keyboard, the mac os installation would still not boot but at least I was able to press N to boot from network and start a Mac OS from the network. From there I could insert the Mac OS installation disc and start the installation from there and now everything works fine. Thanks to everyone for your help.

Hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

T sql dose not work in SQlCompact

im useing a T Sql in SQlCompact database but
it dose not work the function is stuff() that forgathering values in on
cell this is the select
Statement but it shows me an error asking
for help
SELECT Pepole.ID,
Pepole.FNA, Pepole.LNA, STUFF ((SELECT ', ' + Name AS Expr1 FROM Special AS S2 WHERE (ID = PeopleTarget_1.SpecialID) FOR XML PATH('')),,,) AS Names FROM Pepole INNER
JOIN PeopleTarget AS PeopleTarget_1 ON Pepole.ID = PeopleTarget_1.PeopleID INNER JOIN Special
AS Special_1 ON PeopleTarget_1.PeopleID = Special_1.ID

SELECT Pepole.ID, Pepole.FNA, Pepole.LNA, STUFF
((SELECT ', ' + Name AS Expr1
FROM Special AS S2
WHERE (ID = PeopleTarget_1.SpecialID) FOR XML PATH('')),,,) AS Names
FROM Pepole INNER JOIN
PeopleTarget AS PeopleTarget_1 ON Pepole.ID = PeopleTarget_1.PeopleID INNER JOIN
Special AS Special_1 ON PeopleTarget_1.PeopleID = Special_1.ID

Scrolling in firefox while i use silverlight dose not work

Locking duplicate thread. Please continue here: [[/questions/1059602]]
i use microsoft silverlight in my work but scrolling dose not work to up/down the page please help
it was work but now it's not

If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Nokia N95 - GPS dos not work & Barcode Scan not wo...

Hi.. I have Nokia N95 (N95-1 by user manual) - device firmware soft version
11.0.026
17-04-07
RM-159
Nokia N95(05.01)
When i try use "GPS position" application or "Maps" it's dos not work. All ways i see - "no connected" in status (in my home, in street and other open places). In all times that i'am user my N95 only one time by command "Satellites State" y have screen with 2 satellite (~5second) and other time allways "No Data or No Connected Satellites".
Q: Whats the problem - it's that Qaulite(or Strong) of GPS(for that needed like it GPS)? or it's defect and GPS must work avrever (and home, and on street)
When i try use application "Barcode Reader" - it's no one times dos not readed barcode? Only try? and try, and try... all times?
Q: Why dos not work? who see worked "Barcode reader"?
Thank to ALL..
(with love from Russia)
Nokia! Take a care for me and we real say THANK YOU NOKIA and you can collect a more money

First of all , you should update to the newest firmware (v20). If you can of course, for some network branded phones update is not available yet.
As for GPS, first fix is taking a long time (5 to 10 minutes).
In v12 and above A-GPS (assisted GPS) was added to speedup the process. It's using data connection for initial lock.
And make sure you're not covering tha hash key, that's where GPS reciever is. It will get a fix, just be patient because it will take some time.
Barcode reader is not for reading normal barcodes (like on products). It's used for Nokia's mobilecodes. You can check it here
Message Edited by krisq on 28-Dec-2007 11:54 AM

My javac dose not work

my javac dose not work
how do i fix it?
'javac' is not recognized as an internal or external command,
operable program or batch file

Original reply #4:
arian wrote:
click the my computer icon with the right button of mouse, select properties, under advanced tab click Environment Variables, in the system variables section edit Path parameter, add to it the folder where the jdk is installed. after you click apply, open the cmd from scratch and try it. if you've added it correctly, the command will be recognized.
ArianArian, please stop advertising your homepage here.

Sleep button dose not work

Sleep button dose not work properly ,
I have to press it for several time
What can I do?

Have you tried a soft reset? Hold down the Home button and the Power button on the phone until you see the Apple logo appear, then carefully release the buttons allowing the phone to boot back up.

T2000 not enabled to boot from cdrom

Dear,
I have new T2000 and want to install Solaris OS but I am not enabled to boot from cdrom. When I run "ok boot cdrom" get following errors -
Rebooting with command: boot cdrom
Boot device: /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f File and args:
Can't read disk label.
Can't open disk label package
ERROR: boot-read fail
Evaluating:
Can't open boot device
So I searched on google, I got some tips like upgrade the firmware and run the "boot cdrom -nowin" command, I tried alls but no luck ...
"probe-ide" still shows "Device Not Present"...
Please share me your experience about this problem if you have....
///Thanks
Mohammed Tanvir

Run "boot cdrom" twice in quick succession. It worked for me, and it might work for you.

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

Why youtube dose not work on my macbook pro 10.6.6?

why youtube dose not work on my macbook pro 10.6.6 ?

Double check you have the latest version of Adobe Flash.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Magic Mouse Not Working with Boot Camp.

Hi All,
I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
John.

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

Keybored dose not work to boot from cd

Similar Messages

Maybe you are looking for