Keychain autoconnect by one application others work in Maverick

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Similar Messages

One application with Multiple schemas- common application frame work

Hi All,
I am trying setup a common application frame work in apex. Please help me.
How to achieve this.
Creation of one application attached to different schemas at run time. So that my application maintaince is going to be easy instated of creating copies of same application.
More details:
1. I have one application with 100 pages pointing to a schema dev_common in one workspace APP_COMMON. I have 50 schemas with same structure of dev_common schema with different set of data ( because of large amount of data).
So I want to create one application attached to different schemas.
2. And another thing is I have 100 users, the user can work on 1 or multiple schemas ( I mean same application with different schemas attached)
Any help much appreciated.
Thanks,

Thank you for the reply.
>> b) I think you have to give access rights for the dev_common and app_common to all users.
Dev_common schema is a kind of placeholder. I have 50 schemas same as dev_common because of different business requirements but the front end is same for all 50 schemas. How can we create one application used for 50 schemas instead of creating 50 applications and 50 workspaces.
Please help me.

IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time. Apple and 3rd party applications - all freeze the main menu. Safe mode seems to work OK. Tried repairing permissions - didn't work.

For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?

Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

I have deployed one application containing youtube video but it is not working pls help

I have deployed one application containing youtube video but it is not working pls help Application is build using struts2 and is deployed in oracle cloud, login page works fine but the success page is not displayed please help

Hello,
A wild guess, given the lack of details:
I wonder whether it would violate the http://en.wikipedia.org/wiki/Same-origin_policy ?
This is part of the security infrastructure.
"Stealing" content to insert it anywhere else might also violate copyrights?
Technically, does it at least work "on premises" onto WLS 10.3.6?
Regards
Patrick.

How to make data flow from one application to other in BPEL.

Hi All,
I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
Experience people please guide.
Sales Person -----> Sales Manager ----> Production Manager
Thanks
Yatan

Yes you can do this.
If you each integration point to be in different process, you have to create three BPEL process.
1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
-Ramana.

Can we drill down from one application to other in design studio 1.2

Hi All,
Can we drill down from one application to another application in design studio 1.2?
I have a requirement where in on clicking one should drill down to a detail level information shown in a different application.
Regards,
Tanisha

A quick suggestion would be to look at OpenDoc - see this thread Passing Parameters with OpenDocument in SAP Des... | SCN

I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number

I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number

The activation servers for CS and CS2 stopped working and were taken down. You'll need to take a look at this link for your issue: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Benjamin

Transfer of values from one application to other

hi,
Can i update second plng application members from first application's default.lgf file.
Can i anyone give simple example on before range & after range options?
thanks,

Hi,
I dont think you can update members. However, you can definitely send transactional data from one application to another using the DESTINATION_APP statement.
You have a good example available in BPC 320 on beforerange and afterrange.
Lets say that there are 5 columns in the report after the EVDRE expansion is done. Then in the beforerange or afterrange, you can use EVRNG function with a range of 5 cells. Lets say that you define EVRNG(J1:N1). In these cells, you can use formulas like EVSUM etc, and these formulas will be taken by the rows in your EVDRE report. If you define afterrange, then you will have additional row at the bottom. If you define beforerange, then you will have additional row at the top.
Hope this helps.

FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

Are the other iPods models, same version as yours. The 2 New FM Tx may need a new iPod software, which you can update via iTunes.
Good Luck!

TS3694 after updating iphone 4s to ios7 , it restart and asking me to connect itunes , i connect it to the pc wz cable, the message appear that itunes couldn't contact iphone sofware update server coz there is no internet , i try other one and it works no

after updating iphone 4s to ios7 , it restart and asking me to connect itunes , i connect it to the pc wz cable, the message appear that itunes couldn't contact iphone sofware update server coz there is no internet , i try other one and it works normally

Oh ...
That makes it difficult. My new (working) phone is a 4S and the SIM card does not fit. The old SIM card is in the 3GS but as far as I know it was was deactivated.
But it seems that with other updates over the last couple of years this was not necessary and my partner went through the same update with her 3GS with no problems.
Should I go to my AT&T dealer and purchase a new SIM card? Is there still a new one available?

My iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

my iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

We have 2 locations using formscentral one location is working fine but the other location is experi

We have 2 locations using formscentral one location is working fine but the other location is experiening slow response (up to two hours) or the form not displaying? What should be looked at?
Thanks
Carleen

Can you describe what you mean by "experiencing slow response"? Do you mean that you don't see the new responses as they come in? Does it takes up to two hours before they show up in the View Responses table when they show up immediately at your other location? And what do you mean but "the form not displaying"? Are you talking about the fillable form or the editable form in FormsCentral?
Can you please add me as co-author ([email protected]) of the form so that I can investigate on my side.
Instructions on how to share can be found here : http://forums.adobe.com/docs/DOC-2462
Gen

MAC Mail: I have 2 accounts set up. I used to be able to add attachments to both accounts, but now I can only attach using 1 of the accounts. The other one doesn't work.

MAC Mail: I have 2 accounts set up. I used to be able to add attachments to both accounts, but now I can only attach using 1 of the accounts. The other one doesn't work.

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

HT2472 I must have done something inadvertently and now if I have more than one application open the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

I must have done something inadvertently and now if I have more than one application open, the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

Hi Jan, Almost sounds like Expose or Spaces....
http://support.apple.com/kb/HT2503

One application with two projects, nothing works....

1st of all hope here is the right place to post this question. And sorry for a bad title, but I couldn't think of nothing better.
2nd, hello everyone!
And now:
I have created a new application in JDeveloper 11.1.1.1.0 and started a project (lets say EXAMPLE_P). I had problems integrating the project with an already existing library (which I did as well). Therefore I opened the project of this library (LIBRARY_P) in the same application as EXAMPLE_P project. Now I wanted to debug, like I used to do in JDeveloper 11TP4, in the classes in the LIBRARY_P while running my EXAMPLE_P web-app.
The problem is that LIBRARY_P has a web-application as example/test, but when I pack the jar I use just certain packages.
Now when I come to JDev 11.1.1.1.0 (Studio Edition Version 11.1.1.1.0, Build JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407) none of the projects works, with or without dependency. For the LIBRARY_P web-application I use a DataSource that I no longer have, so everything falls apart and absolutely nothing works, not even EXAMPLE_P, which does not even have a dependency defined to LIBRARY_P. As soon as I remove LIBRARY_P from the application, EXAMPLE_P works.
Can anyone shed some light on a workaround or explanation why?? (I know already that JDev tries to deploy both of them... question is for the love of god WHY!??!) TP4 was so much better.....
Thank you

Quoting Shay Shmeltzer: "In general if you have a library that you need to use in another project all you need to do is add the JAR to the project properties->libraries and class path."
I agree, but I don't want to just use the library, I want to debug that library using my application.
For this case my EXAMPLE_P is a wep-application, a portal. The LIBRARY_P is a CMS framework. They use struts, tiles, spring, etc....
The library for the cms framework has just classes like actions, filters, listeners, etc, no jsps, no web.xml, just classes. Problem is that the JDev project (v. 11g TP4) for this cms framework has an example application (web-application with struts and so on), so that we can understand on a test (practical test) basis how it works, for a little experimenting, etc.
Now my new portal uses the actions, filters, listeners, etc present in this library and I need to debug how my project behaves with these actions, etc. and where it fails.
These projects were done for OC4J and therefore don't have a weblogic.xml, nor anything for deployment on weblogic, and I have in fact no interest in deploying it, I just want to debug the classes. On JDev 11gTP4 with OC4J I just defined project dependency and as long as it compiled it was possible to debug everything.
Hope now I'm a bit more clear on what is my problem. Me and my metaphors... :)
Thanks for the feedback
Edited by: user11199488 on Sep 16, 2009 10:37 AM

Keychain autoconnect by one application others work in Maverick

Similar Messages

Maybe you are looking for