Keychain Certificate Assistant User interaction is not allowed

Hi Guys,
I have a problem with my keychain certificate assistant and require your help with it.
hope to have someone who have the same plight as me.
I am trying to use the certificate assistant to request an certificate from CA.
However i encount this error.
USer interaction is not allowed
I tried to sent to email and failed too witht the same error.
I have also try to repair via firstaid and all are fine.
Also tried to unlock my keychain but nope still can't
Any help?

Try running a permissions fix routine on your hard drive using Disk Utility, and then try resetting your home folder permissions by booting to the Lion recovery HD partition (reboot with Command-R held down) and then opening the Terminal (in the Utilities menu) and running the command "resetpassword," which will launch a small password and permissions reset tool. In this tool, select your account and then click the button to reset home folder permissions and ACLs.
After this is done, reboot normally and try creating the certificate again.

Similar Messages

  • HT204350 Migration Assistant in Mavericks does not allow User account migration

    Users accounts do not show up at all.

    After a similar problem I found http://www.hardturm.ch/luz/2014/02/fixing-os-x-10-9-mavericks-migration-from-ext ernal-volume/ which explains that since Migration assistant logs you out, it also unmounts external disks. As AtlNCS Admin points out, they have a solution in using ssh and command line stuff to mount the needed disk remotely, but someone in the comments had a simpler solution: do not plug in the external firewire disk until after launchine Migration Assistant. So before running MA, eject the external disk that you want to migrate to the new machine (and unplug it) then start Migration Assistant and after selecting "migrate from an attached disk" THEN plug in the disk. It worked for me.

  • Can we make 3.6.2* version of firefox to update to latest version like FF 7? Instead of patches 3.6.2*? This is for office user who are not allowed to download FF7 which offers far better feature! Make it optional ?

    I have FF7 @ home. simple mistake which is very irritating also is, in 3.6.2*, right-click-> 1st option -> Open in New Window but in FF 4 onwards its right-click -> 1st option -> Open in new tab!!
    Have it optional , check for update .. or get latest ff
    I can not download the FF from site, so if possible please do this!
    If not possible, i would like to know the reason behind for info and nothing else.
    Thanks

    You are not alone with issues related to the e1000e (but all they concluded was that reloading the module makes it work again):
    https://bbs.archlinux.org/viewtopic.php?id=145564
    It seems like this is more your issue:
    http://permalink.gmane.org/gmane.linux. … devel/8932
    But if none of those boot flags work for you, then there's not much you can do, and you'll have to write a script to reload the module each time after initial boot finishes I guess until the module gets fixed.
    Also, power management of the PCIe interface causes the e1000e to shut off after a while as well (lots of people on CentOS noticing this):
    http://serverfault.com/questions/226319 … ie-aspm-do
    So you can use that boot parameter to stop that from happening, if that becomes an issue for you as well.

  • Why is itunes telling me my user id is not authorized to buy a gift certificate?

    I keep trying to buy a printable gift certificate and getting a message that my user ID is not allowed to do this?  I can buy i-tunes so why is this?

    Have a look here  >  http://support.apple.com/kb/TS1389

  • Certificate Assistant and iChat

    Hi,
    I would like to know if it is possible to use the keychain certificate assistant to generate a certificate to be used with iChat to encrypt messages without purchasing a dot mac account? I noticed that while creating a certificate there is an option for encrypting/decrypting iChat. Not sure why this is provided.
    Thanks
    John

    Hi
    Then you might have better success posting in the .mac forum http://discussions.apple.com/category.jspa?categoryID=116

  • [svn:fx-trunk] 11532: ComboBox user interactions

    Revision: 11532
    Author:   [email protected]
    Date:     2009-11-06 13:32:37 -0800 (Fri, 06 Nov 2009)
    Log Message:
    ComboBox user interactions
    Added support for an improved user interaction. When the user starts typing in the textInput, ComboBox will now update the textInput with the rest of the matching item. It will then select the non-typed text. When using the navigation keys, the textInput will change to the new highlighted item.
    QE notes: Tests need updating to account for new user interaction
    Doc notes: We should update the docs to describe the user interaction
    Bugs: N/A
    Reviewer: Glenn
    Tests run: DropDownList, ComboBox
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ComboBox.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DropDownList.as

  • Obtain a primary token for a user who does not have permission to logon locally

    I would like to know whether it's possible to obtain a primary token for a user who doesn't have permission to log on locally. If yes, what the recommended way is for doing that.
    I called LogonUserW with logon32_logon_network logontype for user which is not allowed to logon locally. It returned impersonation token. I called DuplicateTokenEx to create primary token but it still returned impersonation token.

    A Network Logon is always going to return an impersonation token.  This is by design. 
    A Batch or Service logon would return a Primary Token.  The user would need the corresponding right to return these 2 types of token.  Typically, all users are allowed to generate a Network Token (Impersonation Token) but as you have discovered
    it has limited usage which is by design.
    thanks
    Frank K [MSFT]
    Follow us on Twitter, www.twitter.com/WindowsSDK

  • KeyUsage does not allow digital signatures

    Hello,
    I'm getting the security: KeyUsage does not allow digital signatures error (in java log) when trying to authenticate our web-based java app using a smart card (CAC). The smart card authentication works fine on one test system, but not the other. Both are using the same 'certificate' (we believe). Both have the same IIS 6.0 settings, and same java setting...as well as IE browser settings.
    Visually, the symptom presents itself via the sun java login prompt when clicking the link to load the java app. We have an asp client that works fine. Only our java app is asking for re-authentication. If we manually type the credentials of a system admin, it loads the applet fine. What I can't figure out is, "Why are we getting prompted for a log-in to begin?"
    Note: We have verified that IIS (via IIS logs) that authentication is successful, yet still prompted.
    Here is a snippet of the java log: ----------------------------------
    security: Checking if SSL certificate is in Deployment permanent certificate store
    security: KeyUsage does not allow digital signatures
    Exception in thread "HandshakeCompletedNotify-Thread" java.util.ConcurrentModificationException
    at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
    at java.util.HashMap$EntryIterator.next(Unknown Source)
    at java.util.HashMap$EntryIterator.next(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl$NotifyHandshakeThread.run(Unknown Source)
    network: Firewall authentication: site=sditap10086.afsac.wpafb.af.mil/134.136.33.21:443, protocol=https, prompt=, scheme=ntlm
    java.io.IOException: Server returned HTTP response code: 401 for URL: https://sditap10086.afsac.wpafb.af.mil/report.web/ASP/insight-inpage.jar
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    Any clues?

    One of the KeyUsage extension bits is DIGITAL_SIGNATURE which in your case has most likely not been enabled so try getting a certificate signed with the DIGITAL_SIGNATURE bit enabled. It would be a good idea to actual have a look at your certificate to see which KeyUsage bits are enabled and whether the KeyUsage extension is set as critical or not. If the extension is defined as critical, then all the bits have to be followed, whereas if it is not critical, then the bits can be ignored and it depends on the API used on whether they enforce what the bits say.

  • TS3899 The email arrives with no problem, but when making a rely, the message pops up stating "The server does not allow relaying" and the reply is not sent.

    Received an iPad for Father's Day; during email setup, not able to send a reply to an email as a message appears stateing "Message not sent as server does not allow relaying." Can receive emails with no problem. Whoes server, theirs or mine.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Web view / Allow User Interaction always brings up Menu Bar

    Hi,
    I have recognized that a web view on the page which allows user interaction (for example animations with buttons) always causes the menu/navigation bar to pop up which is quite a pain. All other interactive elements don't do it so why would the web view need to cause this.
    mulitstates on top of it or fake buttons obviously don't work since the are needs to be touch sensitive.
    Any suggestions?
    Cheers,
    Alex

    It depends on how the event listeners in the web view are written. for example simple <a href="link.html"></a> elements don't activate the DPS menu. The same is true for touchstart and click elements.
    Try to implement your click/touch events differently. I haven't found the pattern which caused the menu to open, yet. But if you test around a little with different ways of aproch, I'm sure you can find a solutio (e.g. in one case I could solve it by not using event.preventDefault() in another case the touch event was bound within a javascript variable, which also caused the menu to show. etc. pp.)
    Good Luck!

  • Download Assistant not allowing install into Applications Folder

    I've got a brand new MacBook Pro 13", running OS 10.8.3.
    From the Adobe website I click to download Acrobat XI. It downloads and launches the Assistant. According to the web page it will automatically launch the Acrobat install. Here's what happens for me...
    It starts on the Assistant home page, and requires a login. Once logged in, I must find the Acrobat product to click a download link. It opens the Save To dialog, but pointing the the User home folder, not Applications. When I change the destination to the Applications folder, I get this warning (see image)
    Please let me know if someone has a suggestion for getting the Assistant to allow an install to the Applications folder. I have never had this problem with a Mac, or an Adobe product.
    Thanks,
    Bruce

    Hi Anabirch,
    Please Check the permisson on application folder.
      Select folder > Get Info. In the Get Info window, if the Sharing & Permissions pane is not visible, click the disclosure triangle to show it.
      If required, click the lock icon, and enter a name and password.   If you are the owner of an item you will need to authenticate by entering an administrator name and password to change the owner or the “Apply to enclosed” option.
    Let me know if it works.
    Regards,
    Ashish

  • Installed the RDS 2012 Server License per user CAL (5pcs) after not allow over two users remote desktop connection problem

    I have successfully to installed the RDS 2012 Server R2 per user CAL (5pcs) Open License after is found not allow over two users to remote desktop connection on this Server problem, I try to uninstall the license and then (internet on-line & telephone
    call Microsoft Activate Center get the activate key) to reinstall is still same of the result on below problem.
    Select a user disconnect so that you can sign in.
    There are too many users signed in
    User1 Active
    User2 Active
    () Force disconnect of the user

    Hi,
    In addition you can also refer following article for RDL configuration.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Security error - User is not allowed to execute Proces - Resolved

    Enabled security on my domain by editing message-handlers.xml :
    <inbound-flow>
    <!-- <message-handler id="default" />-->
    <message-handler id="security" />
    </inbound-flow>
    commented out <property id="SecuredProcesses" > .. </property> to apply security to all processes.
    Now when I initiate process through BPELConsole I tick the WS-Security and use bpeladmin/welcome1 as credentials (I'm logged into console as this), I get the following error. In fact I get the very same error if I make up a username/password.
    <2007-10-24 08:17:41,343> <ERROR> <archi2.collaxa.cube> <BaseCubeSessionBean::lo
    gError> Error while invoking bean "delivery": [com.collaxa.cube.engine.handlers.
    HandlerInvocationException: Error while invoking inbound message handler.
    An error has occurred while attempting to invoke the inbound message handler cla
    ss "class com.collaxa.cube.security.Authenticator" for the message "". The exce
    ption reported was: User is not allowed to execute Proces, User[true] process [f
    alse]
    ORABPEL-02175
    In bpel.xml of the process itself I have this:
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <BPELSuitcase>
    <BPELProcess id="SQTest2" src="SQTest2.bpel">
    <partnerLinkBindings> ....snip...
    </partnerLinkBindings>
    <preferences>
    <property name="user" encryption="plaintext">bpeladmin</property>
    <property name="pw" encryption="plaintext">welcome1</property>
    </preferences>
    </BPELProcess>
    </BPELSuitcase>
    If I don't supply username/password then I get "Could not apply security [No username provided, security expects user]" which sounds right enough.
    I'm using the default authentication scheme system-jazn-data.xml and using 10.1.3.3 patchset on linux.

    My own fault, putting user credentials in wrong place in bpel.xml:
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <BPELSuitcase>
    <BPELProcess id="SQTest2" src="SQTest2.bpel">
    <partnerLinkBindings> ....
    </partnerLinkBindings>
    <configurations>
    <property name="user" encryption="plaintext">bpeladmin</property>
    <property name="pw" encryption="plaintext">welcome1</property>
    </configurations>
    </BPELProcess>
    </BPELSuitcase>

  • As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    Against TOU which you "agreed" to in order to post in these user to user forums.  If you want to "suggest" something to Apple, do so in the Product Feedback area.

  • Restrict the user should not allow to select No Excise entry tab in MIGO

    Hi
    how to restrict the user should not allow to select No Excise entry tab in MIGO
    if the material Excisable user can bale to select the No Excise entry tab in MIGO . my requirement .... if the Pop come Please enter Excise Invoice number and Excise Invoice Date user should not change the No Excise how to restrict pls advise me
    @sakhi

    These are the options provided by SAP keeping in mind Indian Scenario. Sometimes, vendor forget to send excise invoice copy with the material, in such case, you can select 'Only Part I'.
    Even if you have maintain vendor excise details & material excise details (By mistake) in J1ID, system will throw an error message, excise invoice value is zero. In such case, we can select option 'No excise entry'.
    Your requirement can't be fulfilled in standard way. Even if you go for any Z- developement, you will lose the option.

Maybe you are looking for