Keychain for non-existing keeps coming up

I just changed servers at the end of October and just tonight for the first time I have been asked for a password in order to send an e-mail to one of my other accounts. The account that is requesting the password doesn't even exist to my knowledge. The strange thing is that it is for a e-mail account name that I wanted, but when I tried to get it for an address, I was told that someone else already had it. As a result I changed my e-mail address to something different. It seems that I can recieve mail, just not send it.

Mail keeps information about outgoing servers in a separate list, independently of any specific mail account. The account settings just associate one of the available outgoing servers with each account. Deleting an account doesn’t remove the corresponding outgoing server from the list. Orphaned or dangling outgoing server entries (i.e. not associated with any account) sometimes cause weird sending problems.
Go to Preferences > Accounts > Account Information > Outgoing Mail Server (SMTP), choose Edit Server List from the popup menu, and delete any servers that shouldn’t be there. The Edit Server List panel shows the account each outgoing server is associated with.

Similar Messages

  • More Lion issues - Throwing Console errors for non-existent application

    Again, with the bad side of Lion.
    I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
    In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to:  /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast....  and the others DON'T EVEN EXIST!!
    How do I keep this from happening?  Why does the OS go after this when it's been removed?????
    8/20/11SaturdayAugust 5:30:14.113 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    8/20/11SaturdayAugust 5:31:11.000 PM    kernel    nstat_lookup_entry failed: 2
    8/20/11SaturdayAugust 5:31:44.239 PM    com.apple.SecurityServer    Session 100071 created
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:32:01.234 PM    Preview    snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
    8/20/11SaturdayAugust 5:32:01.318 PM    Preview    writing of document took: 0.083616 secs, success = YES
    8/20/11SaturdayAugust 5:32:42.333 PM    rpcsvchost    sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    8/20/11SaturdayAugust 5:32:42.483 PM    sandboxd    ([66316]) smbd(66316) deny job-creation
    8/20/11SaturdayAugust 5:32:42.583 PM    rpcsvchost    sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
    8/20/11SaturdayAugust 5:32:42.609 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
    8/20/11SaturdayAugust 5:32:53.587 PM    sandboxd    ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
    8/20/11SaturdayAugust 5:34:53.329 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
    8/20/11SaturdayAugust 5:39:32.429 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

    Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • Application hangs for non existing value

    Hi,
    At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
    when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
    why it is hanging in application and why not in DB?
    can any one brief me on this regard? why does application hangs for non exsting value?
    With Regards
    Boo

    Hi,
    At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
    when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
    why it is hanging in application and why not in DB?
    can any one brief me on this regard? why does application hangs for non exsting value?
    With Regards
    Boo

  • CS3 Installer asks for non-existent DVD drive

    I'm running CS3 on Windows XP. I need to reinstall because I somehow lost codecs for Premiere Pro. Whenever I try to reinstall, the CS3 installer puts up an Installer Alert that asks me to insert CS3 Master Collection Disc 1 into drive G:\ to continue installation.
    That sounds pretty simple, but there is no G: drive on my computer. My two DVD drives are D: and E:, and inserting the disc there has no effect. Checking the Windows device manager shows no G: device recognized anywhere on the computer.
    I can only click OK, which returns the same alert, or Cancel to cancel the installation. I cannot, for the life of me, figure out how to get the CS3 installer to ask for installation disks on an existing drive. What's particularly annoying is that the installer is running from a DVD in drive E:, so you'd think it would know to ask for further discs in drive E:. I've tried it as well from drive D:.
    Any ideas for getting the installer to stop asking for discs in a non-existent drive?
    I've toyed with the idea of completely uninstalling CS3, but am afraid that the installer still won't work, in which case I won't be able to get any work done using CS3 at all.
    Thanks for any and all help,
    Mike Boom

    The 404 means you have not followed the Very Important Instructions on the prodesigntools page before clicking the download links.
    The 7 steps are crucial for setting the correct cookies on your hard drive so that the Adobe servers will grant you access to the download files when you click the links.
    So:
    Go back to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Follow the Very Important Instructions (Step 0 to Step 6 = 7 Steps)
    Then click the download links and they will work.

  • Guitar Pro keeps asking me for non existent servers.

    Hi All.
    This problem only occurs when I'm using Guitar Pro 6. When saving a new document, GP6 spins the beach ball for a few minutes then displays a dialog that says 'the server "192.168.1.11" may not exist or is  unavailable at this time. Check the server name or IP address, check your network connection, and then try again." Lately it has added my Mac Book to the beach ball stall cycle so it takes twice as long to think. Eventually I get the save dialog and can carry on as normal. Once it it cycled through both server requests repeatedly for 10 minutes or so, clicking away the dialogs just put me into another cycle, forcing me to force quit. I intend to contact tech support for GP6 obviously, do you guys have any ideas?

    Are you using a router?  I think 192.168.x.y addresses are local router IP's.

  • Each Airport device asking for non-existant password

    My network consists of 2 AEBS and 2 AEs. There is no network password at the moment.
    I just opened up Airport Utility to check a setting and when I double clicked on my main AEBS it asked for a password. I checked every device. They are all asking for a password which doesn't exist, before allowing me to even see the configurations. This happened before with an AE that I was trying to reset, the only way around it was to hook the AE to my mac with ethernet. I really don't want to have to do that every time I want to make a change to my network. Anyone know what's going on here? The same thing happens if I click on Manual Setup or Continue.

    I live on a dirt road with very few neighbors. I would notice if someone parked on the road
    in front of my house. Plus, why would anyone want to change the settings on my airport?
    Also, the passwords it was asking for were not the passwords I had assigned to those airport devices and saved in my keychain. They were some kind of default factory setting passwords.
    Anyway, none of my airport devices is asking me for a password now in order to see their configuration. And I have changed security over to WPA2.
    Message was edited by: pputnam

  • User names for non-existing guest accounts appearing in WCS reports

    Hi All,
    I currently have a client where we have deployed a guest network using webauth and the lobby ambassador account to provision guest users under WCS 5.2.
    When running client detail reports there are a number of odd behaviours that i don't understand.
    First and most importantly the username section of the report is populated with usernames that have never been provisioned and do not currently exist.
    I made a guess and thought maybe it was recording usernames of people who had attempted to log in via webauth using their normal user accounts as the recorded names were in this format but this did not generate an entry in the report.
    The second issue was that a lot of users had pulled down a few MB (8.5 was the highest at that point) of data while not authenticated. The standard webauth page is used with some minor changes and this is tiny so i can't account for where this data is coming from unless they are pulling down that page repeatedly.
    I am hoping someone will have experienced these 2 situations and can assist.
    Thanks
    Ben

    The username section can get populated from the users that do exist on the controller.
    The second issue doesnt make much sense, you may want to open a TAC SR to investigate this further

  • My iphone wont connect to face time and imessage, i've narrowed it down to its trying to connect through my phone number, but when i change to apple id it the screen for the password keeps coming up over and over

    i have narrow my problem down to imessage and facetime are both trying to use my cell phone number to connect but because i am connected thru wifi it wont let me.  I went into the imessage and facetime setting and try to change this to my apple id, problem is it asks for my password and keeps saying its not right, i have the right one, why is it doing this????

    i had this problem, i turned off imessage, turned off phone, turned on phone, turned on imessage and let it reactivate.

  • Inserting the default value for non existing date

    hello,
    i am designing a matrix report for payslip for month wise in oracle 6i report builder.
    in that i want to display per day working hours of the month.
    i m using following query for achieving my goal :
    select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
    a.ISMANNUAL,A.STATUS
    from tbltimeregister1 a,
         tblemployee  b,
          tbldepartment c
    where a.paycode=b.paycode and
    (a.hw >0 or a.mannual_hours is not null ) and
    a.departmentcode='D05' AND
    a.departmentcode=c.departmentcode and
    a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
    ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
    my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
    pl tell me how to modify my query for getting my desirable result.
    Thanking You
    Regards
    Vishal Agrawal

    965354 wrote:
    hello,
    select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
    a.ISMANNUAL,A.STATUS
    from tbltimeregister1 a,
    tblemployee  b,
          tbldepartment c
    where a.paycode=b.paycode and
    (a.hw >0 or a.mannual_hours is not null ) and
    a.departmentcode='D05' AND
    a.departmentcode=c.departmentcode and
    a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
    ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
    my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
    pl tell me how to modify my query for getting my desirable result.Your problem isn't exactly clear to me. How do you pass the dates to be compared to the DateOffice column? It will be better to ensure the Master table contain data for each date (with some default values) and you will not have to tweak your sql.
    Below is a possible solution:
    select *
      from
    select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
    a.ISMANNUAL,A.STATUS
    from tbltimeregister1 a,
         tblemployee  b,
          tbldepartment c
    where a.paycode=b.paycode and
    (a.hw >0 or a.mannual_hours is not null ) and
    a.departmentcode='D05' AND
    a.departmentcode=c.departmentcode and
    a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
    union
    select a.paycode,b.empname,c.departmentname,to_char(&date_variable,'DD') dateoffice,null,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
    a.ISMANNUAL,'A'
    from tbltimeregister1 a,
         tblemployee  b,
          tbldepartment c
    where a.paycode=b.paycode and
    (a.hw >0 or a.mannual_hours is not null ) and
    a.departmentcode='D05' AND
    a.departmentcode=c.departmentcode and
    ORDER BY A.PAYCODE,A.DATEOFFICEIf this is not what you are looking for, then
    1. Post a script that helps us to create the Tables required in your query
    2. Some sample data. That includes the data for master table that has missing dates (4-5 rows should suffice)
    3. The expected results from the sample data you posted.
    Please do not forget to mention your version:
    select * from v$version;

  • SQL Challenge - Returning count=0 for non-existing values

    Hello there,
    I have a question about our requirement and an SQL query. I have posted this to some email groups but got no answer yet.
    Here is the test case:
    SQL> conn ...
    Connected.
    -- create the pattern table and populate
    SQL> create table pattern(id number, keydescription varchar2(50));
    Table created.
    SQL> insert into pattern values(1,'hata1');
    1 row created.
    SQL> insert into pattern values(2,'hata2');
    1 row created.
    SQL> insert into pattern values(3,'hata3');
    1 row created.
    SQL> insert into pattern values(4,'hata4');
    1 row created.
    SQL> insert into pattern values(5,'hata5');
    1 row created.
    SQL> select * from pattern;
    ID KEYDESCRIPTION
    1 hata1
    2 hata2
    3 hata3
    4 hata4
    5 hata5
    SQL> commit;
    Commit complete.
    -- create the messagetrack and populate
    SQL> create table messagetrack(pattern_id number, realdate date);
    Table created.
    SQL> insert into messagetrack values(1,to_date('26/08/2007 13:00:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(1,to_date('26/08/2007 13:05:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(2,to_date('26/08/2007 13:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(3,to_date('26/08/2007 14:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(4,to_date('26/08/2007 15:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(1,to_date('26/08/2007 15:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select * from messagetrack;
    PATTERN_ID REALDATE
    1 26-AUG-07
    1 26-AUG-07
    2 26-AUG-07
    3 26-AUG-07
    4 26-AUG-07
    1 26-AUG-07
    6 rows selected.
    Now, we have this simple query:
    SQL> select p.KeyDescription as rptBase , to_char( mt.realdate,'dd') as P1 , to_char(mt.realdate,'HH24') as P2, count(*) as countX
    2 from messageTrack mt, Pattern p
    3 Where mt.realDate >= to_date('26/08/2007 13:00:00','dd/MM/yyyy hh24:MI:ss')
    4 and mt.realDate <= to_date('27/08/2007 20:00:00','dd/MM/yyyy hh24:MI:ss')
    5 and mt.pattern_id=p.id
    6 group by p.KeyDescription, to_char(mt.realdate,'dd'), to_char( mt.realdate,'HH24')
    7 order by p.KeyDescription, to_char(mt.realdate,'dd'), to_char(mt.realdate,'HH24');
    RPTBASE P1 P2 COUNTX
    hata1 26 13 2
    hata1 26 15 1
    hata2 26 13 1
    hata3 26 14 1
    hata4 26 15 1
    But the result we need should contain the pattern values(hata1, hata2, hata3 and hata4) for each time interval(hour) although there are might be no records of some patterns for some hours.
    The result for our test case should look like this:
    RPTBASE P1 P2 COUNTX
    hata1 26 13 2
    hata1 26 14 0
    hata1 26 15 0
    hata2 26 13 1
    hata2 26 14 0
    hata2 26 15 0
    hata3 26 13 0
    hata3 26 14 1
    hata3 26 15 0
    hata4 26 13 0
    hata4 26 14 0
    hata4 26 15 1
    Our version is 10.2.0.2
    On my discussions some said model clause may be used, but i don't know model clause much and can't imagine how to use.
    You can download the test case code above to reproduce from:
    http://www.bhatipoglu.com/files/query1.txt
    You can see the output above more clearly(monospace font) on:
    http://www.bhatipoglu.com/files/query1_output.txt
    Additionally, I want to state that, in the resulting table, we don't want all the patterns(hata1, hata2, hata3, hata4 and hata5). We just want the ones that exists on messageTrack table(hata1, hata2, hata3 and hata4) as you see on the result.
    Thanks in advance.

    Here is an attempt with the Model Clause:
    Edit: I should mention that I created a view out of your original query.
    SELECT rptbase
          ,day
          ,hour
          ,countx
    FROM demoV
      MODEL
        DIMENSION BY (rptbase, day, hour)
        MEASURES (countx)
          RULES(countx[
                        FOR rptbase IN (SELECT rptbase
                                        FROM demoV)
                        ,FOR day IN   (SELECT day
                                        FROM demoV)
                        ,FOR hour FROM 13 to 15 INCREMENT 1
                        ] =
                        NVL(countx[CV(rptbase),CV(day),CV(hour)],0)
                order by 1,2,3;Which produces the following
    RPTBASE                                    DAY                 HOUR               COUNTX                
    hata1                                              26                     13                     2                     
    hata1                                              26                     14                     0                     
    hata1                                              26                     15                     1                     
    hata2                                              26                     13                     1                     
    hata2                                              26                     14                     0                     
    hata2                                              26                     15                     0                     
    hata3                                              26                     13                     0                     
    hata3                                              26                     14                     1                     
    hata3                                              26                     15                     0                     
    hata4                                              26                     13                     0                     
    hata4                                              26                     14                     0                     
    hata4                                              26                     15                     1               Note my Hata1 26 15 has a countx of 1 (I believe that this is correct and that your sample result is incorrect, if this is not the case, please explain why it should be 0)
    Message was edited by:
    JS1

  • LR 1.3.1 waiting for non-existing xmp and thm files

    I am experiencing a problem where Lightroom 1.3.1 stalls while I am scrolling through larger folders/collections. This happens on some (specific) folders only, but can get to a point where LR becomes unusable.
    Trying to nail that down, I used a file monitor (filemon from sysinternals) and spotted that LR is looking for xmp and thm files that do not exist. The reason this is slow for me probably relates to the fact, that this search happens over my local network (because my original photos are on a different computer). Estimating numbers, LR waits approx 500 ms per photo (looking for .xmp, .XMP, .thm and .THM in that time), but only for some photos in that folder.
    I upgraded from 1.2 to 1.3.1 and am quite certain, that this was smooth with 1.2.
    My catalog definitely doesn't write to xmp automatically. I do in fact not have a single xmp file in any of my directories. In catalog settings I also have the 'Include develop settings in metadata in jpg...' deactivated (what does that btw?).
    Anyone experiencing similar issues? Any ideas what I am doing wrong here? Why is LR looking for those files in the first place?
    Stefan

    I am actually a bit surprised I am the only one hitting that problem.
    Does anyone else have a setup where the original photos are on a networked machine, and the working catalog is on the local machine where Lightroom is running? I assume this is why I am experiencing long delays whereas 'normal' users just don't notice that problem...

  • UpdateXML for non-existing attribute

    Hello
    bellow are data for a sreange looking (for me) behaviour of updateXML.
    Usually (i mean other languages) setting an xml node attribute causes attribute creation if it does not exist.
    Here obviously that is not the case.
    Q: Why and is it possible to create attribute during node update?
    thank you
    i
    h3. general info
    SQL&gt; select * from v$version;
    BANNER
    Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
    PL/SQL Release 9.2.0.7.0 - Production
    CORE 9.2.0.7.0 Production
    TNS for 32-bit Windows: Version 9.2.0.7.0 - Production
    NLSRTL Version 9.2.0.7.0 - Production
    SQL&gt; select dbms_metadata.get_DDL('TABLE', 'X') FROM dual;
    DBMS_METADATA.GET_DDL('TABLE',
    CREATE TABLE "PCB_1209"."X"
    ( "NODE" "SYS"."XMLTYPE"
    ) PCTFREE 10
    SQL&gt;
    SQL&gt; insert into x values(Xmltype('&lt;TOP&gt;&lt;DATAID&gt;111080&lt;/DATAID&gt;&lt;/TOP&gt;'));
    SQL&gt; insert into x values(Xmltype('&lt;TOP&gt;&lt;DATAID lbl="test"&gt;111000&lt;/DATAID&gt;&lt;/TOP&gt;'));
    SQL&gt; commit;
    Commit complete
    h3. correct part
    SQL&gt;
    SQL&gt; select extract(node, '/').getStringVal() as node
    2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111000;
    NODE
    &lt;TOP&gt;
    &lt;DATAID lbl="test"&gt;111000&lt;/DATAID&gt;
    &lt;/TOP&gt;
    SQL&gt;
    SQL&gt; update x set node = updateXML(node,'//DATAID/@lbl','test_new')
    2 where extract(node, '//DATAID/text()').getNumberVal() = 111000;
    1 row updated
    SQL&gt; commit;
    Commit complete
    SQL&gt;
    SQL&gt; select extract(node, '/').getStringVal() as node
    2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111000;
    NODE
    &lt;TOP&gt;
    &lt;DATAID lbl="test_new"&gt;111000&lt;/DATAID&gt;
    &lt;/TOP&gt;
    h3. wrong part
    SQL&gt;
    SQL&gt; select extract(node, '/').getStringVal() as node
    2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111080;
    NODE
    &lt;TOP&gt;
    &lt;DATAID&gt;111080&lt;/DATAID&gt;
    &lt;/TOP&gt;
    SQL&gt;
    SQL&gt; update x set node = updateXML(node,'//DATAID/@lbl','test_new')
    2 where extract(node, '//DATAID/text()').getNumberVal() = 111080;
    1 row updated
    SQL&gt; commit;
    Commit complete
    SQL&gt;
    SQL&gt; select extract(node, '/').getStringVal() as node
    2 from x where extract(node, '//DATAID/text()').getNumberVal() = 111080;
    NODE
    &lt;TOP&gt;
    &lt;DATAID&gt;111080&lt;/DATAID&gt;
    &lt;/TOP&gt;

    Unusual, probably. Documented, yes. This is from 10.2 but would still be applicable to you and your situation.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14214/chapter1.htm#FEATURENO05479
    The current UpdateXML() function can only manipulate the content of existing nodes within an XML document. It cannot be used to add or remove nodes from a document. The only way to add or remove nodes from a document is to use the methods provided by the DOM API.So you are going to have to insert/create that attribute in the XML before you can update it. I was going to provide a link to some examples but I can't seem to recall where I saw them in the forums. I thought it was on {forum:id=75} but I can't find it now.

  • Passwords for non-existent email addresses?

    Just changed computers and now can't transfer some apps that were bought on a different Apple ID and can't remember the password. Can't get the password resent as they want to send it to an email address that no longer exists? How can I get the password? How can I get those apps onto my computer?

    It all depends on your setup.
    If you use only local mail domains, just make sure you do not have a catchall address (luser_relay) and messages to unknown users will not be accepted by Postfix in the first place.
    If you use virtual mail domain, you will need to change your setup as Apple's default setup will always accept mail for unknown users and then bounce it back to sender. See here for a how to: Making Virtual Mail Users in OS X 10.4/10.5 Server
    HTH,
    Alex

  • Constant dns lookups for non-existent addresses

    Hi. I'm connected to a large network and I've noticed
    that there are constant dns lookups for addresses that
    do not exist.
    When i run tcpdump, almost every second
    I see a few requests to the dns server from my IP. And all
    of them get the response NXDOMAIN.
    Is there a reason this should happen or is there something
    not working properly on my computer?
    Thanks
    Last edited by m00nblade (2010-01-25 21:42:23)

    It all depends on your setup.
    If you use only local mail domains, just make sure you do not have a catchall address (luser_relay) and messages to unknown users will not be accepted by Postfix in the first place.
    If you use virtual mail domain, you will need to change your setup as Apple's default setup will always accept mail for unknown users and then bounce it back to sender. See here for a how to: Making Virtual Mail Users in OS X 10.4/10.5 Server
    HTH,
    Alex

  • X61: Bios looks for non-existing CDROM drive?

    Hi,
    I recently observe a problem with my X61. After the machine is power on, it stops (with a blank screen) for about half a minute before starting to boot Vista. I also notice that if I connect a USB CDROM drive to the machine, then it will not stop during the startup process. I think the problem is that the Bios is looking for a CDROM drive which is not there. Since this problem only happen recently, I suspect that it is due to a recent Bios update. I down-graded the bios from v2.20 to v2.19 but the problem still exists. Could anyone let me know which bios version should I downgrade to? Thanks.
    Best Regards,
    Daniel

    Did you check the boot order in BIOS first? By default , the optical drive should be listed, then the HDD. Sometimes depending on your BIOS seup, you'll see one of of the USB devices listed first. If you power on the unit with a USB CDROM already attached  to the unit while turning it on, it's possible the BIOS will detect it and try booting from it.
    Enter the BIOS at boot by tapping F1
    Then Go to "Startup" , then "Boot"
    Remember that you can also exclude any item you want BIOS boot order (normally by pressing "X") Use F5 and F6 to arrow up and down the Boot order.
    You can also press F9 to try loading the BIOS defaults.
    Let me know if this helps.
    Cheers,
    Mark
     Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Maybe you are looking for

  • EjB 3.0 persist

    Hi All, I am using EJB 3.0 and JBOSS 4.0.3. I have two entities events and eventInfo . @Entity(access = AccessType.FIELD) @Table(name = EVENT_TABLE) @SequenceGenerator(name="LogSeq", sequenceName="event_log_seq") public class Events {      @Id(genera

  • Problem with MM

    Hi, I want to see Purchase order wise report. The report should show PO wise payment in FI. PO field is EBLEN and i am unable to find its link to BSIK or BSAK. The reason is that they are not maintaining EBELN in both these table. I tried on LIFNR bu

  • Making a Jpeg gallery with the Loader component...

    I'm trying to make a gallery using many loader component thumbnail photos that present their larger image in a different (loader component) box when rolling over with my cursor...Is this right? Is there an easier way I can do this? If I can do it thi

  • Read GUID of profile set in another component

    Hi, I am trying to read GUID of one component into another. Read it like this: This is marketing scenario where we create segments. Each segment has a GUID attached to it but component SEGED_SET which is meant for segments has no such attribute. How

  • WIP Mass Load with Serial Number

    Hi, I have created job from oracle Application. now i need to assign serial number from the WIP Mass Load. can any one give me the fields required / script to upload. Rgds ramesh